onsemi

CS5160GD - 5-Bit Dual Synchronous Buck Controller | onsemi

MPN: CS5160GD ✗ End of Life
1.5 A Id 16-pin PDSO (SOIC-16), surface mount Package 1000 kHz Speed
MOQ: 1 |

CS5160GD Overview

The onsemi CS5160GD is a 5-bit synchronous dual N-channel buck controller designed for high-density, high-speed logic systems requiring fast transient response. The device provides two regulated outputs, supports switching frequencies up to 1000 kHz, and is rated for operation at 1.5 A. It is packaged in a 16-pin PDSO (SOIC-16) surface-mount package.

A synchronous buck controller is a type of DC-DC converter controller that drives high-side and low-side N-channel MOSFETs to regulate a switching power stage. This topology belongs to the voltage-regulator family and ultimately to the broader power-management IC category. Compared with an asynchronous controller, a synchronous design replaces a rectifier diode with a controlled low-side MOSFET, reducing conduction loss and improving conversion efficiency when the design is implemented with suitable power components.

The defining feature of the CS5160GD is its 5-bit control resolution. This resolution allows the controller to command a larger number of discrete output-voltage steps than a conventional 3-bit controller, supporting finer regulation granularity in systems that need multiple logic rails. Its dual-output architecture also permits a single controller to manage two independent processor rails instead of using separate controller ICs for each rail.

The CS5160 uses current-mode and voltage-mode control, and its internal circuitry is intended for demanding microprocessor and logic applications. According to the onsemi datasheet, the controller is designed to provide unprecedented transient response for high-density, high-speed logic. Its operating switching frequency can reach 1000 kHz, helping the power stage respond quickly to load changes while reducing the output-voltage excursion experienced by the downstream logic.

Typical uses include Intel Pentium II-era computer power systems, microprocessor core-voltage regulation, clock-generation and logic-rail subsystems, and other multi-rail desktop or industrial computing boards. The dual outputs are particularly useful when the processor requires separate core and auxiliary rails with tightly coordinated load transients.

When laying out a CS5160GD design, follow the recommended compensation, MOSFET, inductor, and capacitor selections in the manufacturer datasheet. The 5-bit programming interface and dual-output topology do not guarantee correct sequencing or transient performance by themselves; those outcomes depend on the external power stage, feedback network, and control-loop compensation.

Drop-in alternatives for CS5160GD — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

CS5160GD16

✅ Drop-In
📦 16-pin PDSO (SOIC-16)
Same CS5160 family and 16-pin PDSO package; ordering-code and temperature-grade details must be confirmed against the manufacturer documentation.

📋 Reference alternative (not in catalog)

CS5160GD Maximum Ratings & Electrical Characteristics

Product Type CPU 5-bit synchronous buck controller
Control Resolution 5 bits
Topology Synchronous dual N-channel buck
Number of Outputs 2 outputs
Output Current Rating 1.5 A
Maximum Switching Frequency 1000 kHz
Control Mode Current mode / voltage mode
Package 16-pin PDSO (SOIC-16), surface mount
Manufacturer onsemi
Application Intel Pentium II voltage regulation
Transient Response Optimized for high-density, high-speed logic

CS5160GD 16-pin pdso (soic-16), surface mount Pin Configuration Guide

Pin configuration for CS5160GD (16-pin pdso (soic-16), surface mount package). This power device features gate, drain, and source terminals. For non-polarized packages, refer to the manufacturer datasheet for exact pin 1 orientation and footprint details. Common applications include power supply design, motor driving, and load switching.

16-pin pdso (soic-16), surface mount package pinout diagram for CS5160GD

No detailed pinout data available for CS5160GD.

Refer to the datasheet for full pin configuration.

Typical Applications

CS5160GD is suitable for 6 applications: Legacy Pentium II Processor Core Regulation, Multi-Rail Computer Logic Power, High-Speed Clock and Logic Rail Control, Embedded Legacy Processor Board Repair, Dual-Rail Industrial Logic Supply, CPU Voltage-Sequencing Reference Design.

🖥️

Legacy Pentium II Processor Core Regulation

The CS5160GD fits legacy Intel Pentium II processor boards because it was developed as a CPU 5-bit synchronous buck controller for the Pentium II voltage-regulator role. Its two outputs can serve separate processor-related rails, while the 5-bit programming interface provides more adjustment steps than a conventional 3-bit controller. The onsemi CS5160 datasheet identifies a 1.5 A rating and up to 1000 kHz switching, characteristics suited to fast-changing logic loads. In a new design, validate the exact voltage table, reference values, compensation, and MOSFET selection against the original motherboard schematics before layout reuse.

⚡

Multi-Rail Computer Logic Power

The CS5160GD can manage two synchronous N-channel buck stages where a legacy computing board needs separate core and auxiliary logic rails. Its dual-output architecture reduces the controller count compared with using two independent regulators, and its 1000 kHz maximum switching frequency supports rapid response to processor load steps. According to the onsemi CS5160 datasheet, the architecture was designed for unprecedented transient response in high-density, high-speed logic. Circuit implementation still depends on accurate voltage programming, per-rail compensation, inductor sizing, and layout that minimizes high-current switching loops.

🧩

High-Speed Clock and Logic Rail Control

The CS5160GD is suitable for clock-generation or dense digital-logic subsystems that require fast rail correction during abrupt load changes. Its 5-bit control resolution allows finer voltage-step commands than a 3-bit controller, while the synchronous N-channel topology reduces the conduction loss associated with an asynchronous rectifier when appropriate MOSFETs are used. The onsemi CS5160 datasheet explicitly targets high-density, high-speed logic. Keep the feedback traces short, place compensation close to the controller, and verify that switching ripple remains within the clock circuit's permitted noise budget.

🔧

Embedded Legacy Processor Board Repair

The CS5160GD is valuable for sustaining or repairing legacy CPU boards where the original controller footprint and voltage-program scheme must be preserved. Using the documented 16-pin PDSO footprint avoids a full board respin, while the 5-bit interface and dual-output capability support original processor power architectures. The onsemi CS5160 datasheet describes the part as a CPU controller designed for demanding logic systems. Repair work should include confirmation of the programming resistor values, MOSFET gate-drive waveforms, inductor saturation margin, and the operating conditions of any electrolytic output capacitors.

🏭

Dual-Rail Industrial Logic Supply

The CS5160GD can control two logic rails in an industrial controller or test system that retains legacy power-conversion requirements. Its 1.5 A rating, dual synchronous N-channel architecture, and 1000 kHz maximum switching frequency suit moderate-current, fast-transient digital supplies. According to the onsemi CS5160 datasheet, the controller was developed for high-density, high-speed logic rather than low-power energy harvesting. Designers should treat the aging controller status as a lifecycle issue and request availability confirmation before committing to new industrial production volumes.

📺

CPU Voltage-Sequencing Reference Design

The CS5160GD can serve as the controller element in a legacy two-rail sequencing study because it provides two outputs for coordinated processor power delivery. The 5-bit control interface gives the designer more discrete adjustment positions, while the 1000 kHz switching capability supports fast transient correction. The onsemi CS5160 datasheet lists the device as an Intel Pentium II voltage-regulator controller, making it directly relevant to period-correct sequencing schemes. In a new board, replicate only the sequencing philosophy rather than assuming modern load-current, temperature, and reliability requirements are automatically met.

Recommended Products Summary

CS5160GD16 Same-family 16-pin PDSO controller ordering option Used in: Legacy Pentium II Processor Core Regulation, Multi-Rail Computer Logic Power, High-Speed Clock and Logic Rail Control, Embedded Legacy Processor Board Repair, Dual-Rail Industrial Logic Supply, CPU Voltage-Sequencing Reference Design
What is the onsemi CS5160GD?
The onsemi CS5160GD is a 5-bit, dual-output synchronous buck controller for high-density, high-speed logic. It drives external N-channel MOSFETs in two synchronous buck power stages and is rated at 1.5 A with a maximum switching frequency of 1000 kHz. According to the onsemi CS5160 datasheet, the 5-bit control interface provides finer voltage-step resolution than conventional 3-bit controllers.
How many outputs and power stages does the CS5160GD control?
The CS5160GD controls two independent synchronous buck outputs using external high-side and low-side N-channel MOSFETs. This dual-output arrangement is useful when a processor system requires separate core and auxiliary rails. The onsemi CS5160 datasheet identifies the device as a dual N-channel synchronous buck controller with two outputs and a 1.5 A rating.
What is the maximum switching frequency of the CS5160GD?
The CS5160GD supports a maximum switching frequency of 1000 kHz. According to the onsemi CS5160 datasheet, this high operating frequency is intended to improve transient response in dense, high-speed logic power systems. The final switching rate used in a design remains subject to the external MOSFETs, inductor, load, and control-loop requirements.
Why does the CS5160GD use a 5-bit control interface?
The 5-bit interface allows the controller to command more discrete output-voltage settings than a 3-bit controller, providing finer regulation granularity for processor and logic rails. According to the onsemi CS5160 datasheet, the device was designed for demanding high-density, high-speed logic applications where a conventional coarse voltage-code interface would be restrictive.
Is the CS5160GD a switching regulator or a controller?
The CS5160GD is a controller, not a complete standalone regulator IC. It drives external N-channel MOSFET power stages and requires external inductors, output capacitors, feedback components, and compensation networks. The onsemi CS5160 datasheet describes it as a synchronous buck controller for CPU and high-speed logic voltage regulation.
Where can I download the CS5160GD datasheet PDF?
The CS5160GD datasheet PDF is available through the onsemi document listing on Alldatasheet and through the CS5160 datasheet index maintained by Datasheet4u. The manufacturer document describes the 5-bit dual synchronous buck controller, its 1.5 A rating, its 1000 kHz maximum switching frequency, and the associated pin and application information.
Where can I find the CS5160GD pinout?
The CS5160GD pin assignment is shown in the pin-description section of the onsemi CS5160 datasheet. The device uses a 16-pin PDSO surface-mount package, also identified as 16-SOIC. Use the manufacturer pin-description table when assigning PCB nets because auxiliary functions and exposed supply or ground connections must be wired exactly as specified.
Where can I buy the CS5160GD and what is the current lead time?
The CS5160GD is offered through authorized distribution and specialist sourcing channels, but current inventory and lead time can vary by region and order quantity. Use the Request a Quote form on this page to request current pricing, stock confirmation, and a committed lead time for your required quantity and shipment destination.
What is the price of the CS5160GD?
The current market price for the CS5160GD depends on quantity, condition, and sourcing channel. Request a quote through the Request a Quote form on this page to obtain a current price for the quantity you need. Because this controller has an aging legacy footprint, checking obsolescence status and long-term supply before committing to a production design is recommended.
Is the CS5160GD currently in stock?
Stock availability for the CS5160GD changes with market activity and regional inventory. Submit the Request a Quote form on this page with your required quantity, target date, and delivery country to confirm current availability. For new production runs, also request lifecycle and obsolescence confirmation rather than relying on a temporary distributor listing.
What is the best drop-in replacement for the CS5160GD?
The CS5160GD16 is the closest documented onsemi ordering option because it identifies the same CS5160 controller in a 16-pin PDSO package. Verify the complete ordering code, temperature range, and pin functions against the manufacturer datasheet before treating it as a drop-in substitute. The same-package CS5160GD16 is the only clearly documented same-footprint alternative, so PCB reuse should be confirmed rather than assumed.
Can the CS5160GD16 replace the CS5160GD?
The CS5160GD16 uses the same 16-pin PDSO package and CS5160 controller family, making it the closest candidate for pin-compatible replacement. Before substitution, compare the ordering-code details, temperature grade, and any option-dependent behavior in the manufacturer documentation. Because both ordering codes are variants of the same device, this is a device-family substitution rather than a cross-manufacturer drop-in.
What can replace the CS5160GD in a legacy motherboard design?
Start with the CS5160GD16 in the 16-pin PDSO package because it is the documented same-family ordering option. A cross-manufacturer controller generally requires a full review of voltage-programming pins, compensation, soft-start behavior, gate-drive timing, and layout because different controllers can use identical packages without being interchangeable. Confirm the complete external power stage and feedback network before approving a substitution.
Is the CS5160GD suitable for an Intel Pentium II motherboard?
Yes, the onsemi CS5160GD was specifically positioned for Intel Pentium II voltage regulation and is listed as a controller for that application. The dual-output architecture, 5-bit voltage resolution, and 1.5 A rating match legacy multiprocessor and logic-board requirements. According to the onsemi CS5160 datasheet, the device targets high-density, high-speed logic systems.
CS5160GD vs CS5160GD16 - which should I choose?
Choose CS5160GD16 when its documented temperature grade and option code match the production requirements; choose CS5160GD when that ordering code and lifecycle commitment fit the supply plan. Both are identified as 16-pin PDSO CS5160 controller variants, but the suffix distinction still requires comparison of the ordering information. Request lifecycle confirmation through the Request a Quote form before locking the BOM.
What are the key specifications of the CS5160GD that engineers should know?
The essential CS5160GD specifications are 5-bit voltage-programming resolution, two synchronous N-channel buck outputs, a 1.5 A current rating, and a maximum switching frequency of 1000 kHz. The device uses a 16-pin PDSO surface-mount package and supports current-mode or voltage-mode control. According to the onsemi CS5160 datasheet, its core purpose is fast transient response for dense, high-speed logic rails.

Engineering reference data for CS5160GD — comparison, design guidance, and compliance information.

Selection Guide

Choose the CS5160GD for repairing or reproducing a legacy Intel Pentium II-class power architecture when the original board uses a 16-pin PDSO footprint and the onsemi CS5160 control scheme. It is appropriate when two synchronous N-channel buck stages, 5-bit voltage programming, and a maximum switching frequency of 1000 kHz match the original design. Consider the CS5160GD16 when its documented ordering code, temperature grade, and lifecycle terms better fit the required supply plan, but compare those details before treating it as a substitute. Do not assume that another 16-pin controller is interchangeable even if the package drawings match; voltage-program thresholds, compensation, soft start, gate drive, and feedback reference can differ. For new designs, confirm availability and long-term lifecycle support through the Request a Quote form before committing the controller to a production BOM.

Comparison with Alternatives

Parameter This Product CS5160GD16
Brand onsemi onsemi
Package 16-pin PDSO (SOIC-16) 16-pin PDSO (SOIC-16)
Product Type 5-bit synchronous buck controller 5-bit synchronous buck controller
Number of Outputs 2 outputs 2 outputs
Output Current Rating 1.5 A 1.5 A
Maximum Switching Frequency 1000 kHz 1000 kHz
Control Mode Current mode / voltage mode Current mode / voltage mode
Topology Dual N-channel synchronous buck Dual N-channel synchronous buck
Primary Application Intel Pentium II voltage regulation Intel Pentium II voltage regulation
Ordering and Temperature Details CS5160GD ordering code CS5160GD16 ordering code; confirm grade in manufacturer documentation

Key Differentiators

  • Fine 5-bit voltage-programming resolution (vs CS5160GD16)
  • Dual synchronous N-channel outputs in one controller (vs CS5160GD16)
  • Fast-response CPU and high-speed logic positioning (vs CS5160GD16)

Design Notes

Place the controller, compensation components, and feedback components close to the associated power stage. Keep the high-current VIN, PHASE, and output-capacitor loops compact, and route sensitive feedback traces away from switching nodes. For a two-rail board, keep the two power-stage layouts symmetrical where possible because unequal parasitic inductance and loop area can change transient behavior even when the controller settings are identical.

The 1.5 A controller rating does not by itself establish the output-current capability of the assembled converter. That value also depends on the external high-side and low-side MOSFETs, inductor saturation current, copper paths, and output-capacitor ripple rating. Calculate worst-case dissipation across both MOSFETs and the inductor at maximum load and verify thermal margin using the actual PCB copper area and airflow conditions.

Do not substitute a different controller solely because it uses a 16-pin SOIC package. Compare the voltage-programming pin thresholds, feedback reference, compensation method, gate-drive timing, soft-start behavior, and output-current capability with the CS5160GD. For an existing motherboard, also verify the resistor values and capacitor polarities because a controller-level replacement cannot correct a legacy design with incorrect rail settings or aged storage components.

Treat the 1000 kHz switching capability as a design tool rather than a mandatory operating point. Select the actual frequency to balance transient response against MOSFET switching loss, inductor ripple current, and output-voltage ripple. Probe the feedback and output nodes with short ground springs and a suitable bandwidth-limited oscilloscope setup before and after compensation changes, since the controller's fast response can expose instability that is not obvious at low load.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement appears in the cited listings. The CS5160 is a legacy CPU controller and is treated as NRND for sourcing-planning purposes; request a manufacturer compliance declaration for the exact ordering code before production release.

Data verified on: 2026-11-05 — data verified and curated by XAIPART's component engineering team

Related Searches

CS5160GD datasheet CS5160GD datasheet pdf CS5160GD pinout CS5160GD specifications onsemi CS5160GD CS5160GD 16-SOIC controller CS5160GD equivalent CS5160GD drop-in replacement CS5160GD cross reference CS5160GD vs CS5160GD16 CS5160GD price CS5160GD stock CS5160GD Pentium II voltage regulator CS5160GD schematic CS5160GD application circuit

Related Components & Terms

onsemi CS5160GD CS5160GD16 CS5160 5-bit synchronous buck controller synchronous buck controller DC-DC converter controller voltage regulator power-management IC dual N-channel MOSFET high-side MOSFET low-side MOSFET Intel Pentium II CPU voltage regulation current-mode control voltage-mode control 1000 kHz switching frequency 1.5 A current rating 16-pin PDSO package SOIC-16 surface-mount package transient response high-density logic high-speed logic legacy motherboard
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details