CY8C3246LTI-149 - 50MHz 8051 PSoC 3 MCU | Infineon
MPN: CY8C3246LTI-149 ✓ ActiveCY8C3246LTI-149 Overview
A programmable system-on-chip, or PSoC, combines a microcontroller core with programmable analog and digital peripherals on one integrated device. Unlike a conventional fixed-function MCU, a PSoC allows designers to configure digital blocks, routing, analog functions, and interrupt resources in firmware. The CY8C3246LTI-149 belongs to the PSoC 3 CY8C32xx family, placing it in the broader hierarchy of embedded controllers, microcontrollers, and programmable system-on-chips.
Principal features include a 50 MHz 8051-compatible processor, 24 universal digital blocks, and a 12-bit ADC. The device provides 64 KB of flash, 8 KB of SRAM, 2 KB of data EEPROM, and 8 KB of ECC flash. Its interrupt system supports 27 sources and eight priority levels, while the peripheral hub includes eight parallel access paths for efficient data movement.
The configurable architecture supports multiple peripheral functions through universal digital blocks, including timers, counters, serial interfaces, and communication blocks depending on device configuration. The 12-bit ADC provides a higher-resolution conversion interface than an 8-bit converter, making the MCU useful for industrial control, sensor acquisition, human-interface equipment, and embedded consumer products. The 1.71 V to 5.5 V range supports both low-voltage and conventional 5 V system rails.
Typical uses include industrial sensor nodes, motor and machine-control panels, building-control interfaces, communication equipment, consumer appliances, and compact control systems. Designers can implement application-specific interfaces in programmable logic instead of relying entirely on fixed peripherals, which can reduce external component requirements and simplify board integration.
A critical design consideration is PCB planning for the 68-QFN package and its exposed pad. Follow the manufacturer land-pattern, thermal-pad, and paste-stencil guidance closely, and provide the required local decoupling capacitors. Firmware, peripheral configuration, clocking, and power-management choices should be validated with the relevant PSoC 3 device documentation and development hardware.
This page combines manufacturer specifications, package information, application guidance, lifecycle-oriented sourcing considerations, and engineering design notes to support component selection and board implementation. It also highlights the distinction between electrically useful substitutes and alternatives that merely share a family name without preserving the required 68-QFN pin compatibility.
Drop-in alternatives for CY8C3246LTI-149 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with CY8C3246LTI-149 (same form factor and footprint) — differing in Device Type, Package.
No drop-in alternatives available for this product.
Request AlternativesCY8C3246LTI-149 Maximum Ratings & Electrical Characteristics
| Device Type | 8-bit PSoC 3 programmable system-on-chip microcontroller |
| CPU Architecture | 8051, single core |
| Maximum CPU Frequency | 50 MHz |
| Program Flash | 64 KB (64K x 8 bits) |
| SRAM | 8 KB |
| Data EEPROM | 2 KB |
| ECC Flash | 8 KB |
| Universal Digital Blocks | 24 blocks |
| ADC Resolution | 12 bits |
| Operating Voltage Range | 1.71 V to 5.5 V |
| Interrupt Sources | 27 sources |
| Interrupt Priority Levels | 8 levels |
| Peripheral Hub Parallel Access Paths | 8 paths |
| Flash Protection Levels | 4 levels |
| Package | 68-QFN (8 x 8 mm), exposed pad |
| Mounting Type | Surface mount |
CY8C3246LTI-149 68-qfn (8 x 8 mm), exposed pad Pin Configuration Guide
Pin configuration for CY8C3246LTI-149 (68-qfn (8 x 8 mm), exposed pad package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for CY8C3246LTI-149.
Refer to the datasheet for full pin configuration.
Typical Applications
CY8C3246LTI-149 is suitable for 6 applications: Industrial Sensor Acquisition, Motor and Machine Control, Building Control Interfaces, Communication Equipment, Consumer Appliance Control, Compact Measurement Instruments.
Industrial Sensor Acquisition
The CY8C3246LTI-149 fits industrial sensor nodes that require both digital control and analog measurement in one package. Its 12-bit ADC supports higher-resolution sensing than an 8-bit conversion interface, while 24 universal digital blocks can implement timers, counters, and communication functions around the 50 MHz 8051 core. With 8 KB of SRAM and 2 KB of EEPROM, the device can acquire sensor data and maintain configuration locally. The 1.71 V to 5.5 V range supports low-voltage sensing front ends and 5 V industrial controllers, subject to the complete operating limits.
Recommended
Motor and Machine Control
The CY8C3246LTI-149 is suitable for compact machine-control logic requiring fast deterministic digital functions. The 50 MHz 8051 core and 24 universal digital blocks can be configured for timing, pulse generation, counting, and control-loop support without requiring a large collection of dedicated peripherals. Its 27-source interrupt system and eight priority levels help organize time-critical control events, while 64 KB of flash accommodates control firmware. The main design requirement is careful assignment of the universal blocks and validating timing with the configured peripheral clock.
Recommended
Building Control Interfaces
The CY8C3246LTI-149 can implement local controllers for HVAC equipment, room controls, lighting interfaces, and building automation nodes. Its programmable digital blocks allow communication and timing functions to be adapted to a specific panel, while the 12-bit ADC supports monitoring of analog sensor inputs. The device's 8 KB SRAM is useful for buffering protocol data and control state, and its four flash-protection levels support controlled firmware updates. In building equipment, designers should isolate noisy actuator and relay lines from sensitive analog and clock circuitry.
Recommended
Communication Equipment
The CY8C3246LTI-149 fits protocol gateways and embedded communication modules where a programmable peripheral architecture provides useful flexibility. The 50 MHz 8051 core handles protocol processing, while 24 universal digital blocks can support serial framing, baud-rate generation, timers, and status monitoring. With 64 KB of flash, 8 KB of SRAM, and 2 KB of EEPROM, the controller can maintain configuration and protocol state locally. The package's exposed pad and high pin count still require careful layer-stack planning and unobstructed thermal-via placement.
Recommended
Consumer Appliance Control
The CY8C3246LTI-149 is appropriate for compact appliance controllers that need mixed analog and digital control in a single IC. The 12-bit ADC can monitor temperature, level, or resistive sensors, and the universal digital blocks can manage displays, buttons, relays, and actuator timing. Its 1.71 V to 5.5 V operating range covers common embedded supply arrangements, and 64 KB of flash provides space for application firmware. Firmware designers should exploit the configurable architecture to avoid unnecessary external logic while retaining margin for future product revisions.
Recommended
Compact Measurement Instruments
The CY8C3246LTI-149 supports compact measurement and instrumentation products that need configurable digital logic alongside a 12-bit ADC. The 24 universal digital blocks can implement capture, timing, counting, or trigger functions, while the 50 MHz CPU performs calibration, filtering, and data formatting. Its 8 KB of SRAM supports temporary acquisition buffers and protocol formatting, while 64 KB of flash accommodates control and calibration software. For precision measurements, use careful analog layout, validate reference and converter performance over the intended input range, and separate sensitive signal paths from switching circuitry.
Recommended
Recommended Products Summary
Engineering reference data for CY8C3246LTI-149 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product |
|---|---|
| Brand | Infineon Technologies |
| Package | 68-QFN (8 x 8 mm), exposed pad |
| Product Type | PSoC 3 programmable system-on-chip microcontroller |
| CPU Architecture | 8-bit 8051, single core |
| Maximum CPU Frequency | 50 MHz |
| Program Flash | 64 KB |
| — | — |
| — | — |
| — | — |
| — | — |
| — | — |
| — | — |
| — | — |
| — | — |
| — | — |
Key Differentiators
- Configurable digital processing within a microcontroller (vs CY8C3246LTI-149T)
- Integrated analog conversion (vs Fixed-function 8-bit 8051 controller)
- High interrupt granularity for embedded control (vs Simpler low-pin-count 8-bit MCU)
Design Notes
Use the manufacturer land pattern for the 68-QFN 8 x 8 mm package rather than a generic QFN footprint. Confirm exposed-pad dimensions, copper-defined mask geometry, solder-mask clearance, and paste-stencil aperture from the package drawing. Place input and output decoupling capacitors immediately beside their associated supply pins, while maintaining short return paths to the ground plane.
The exposed pad is a primary thermal and electrical connection for this package. Implement the manufacturer's via pattern beneath the pad, keep the via field free of unintended plane isolation, and provide adequate copper on surrounding layers. Validate junction temperature at the highest expected clock, peripheral-load, ambient-temperature, and supply-voltage conditions rather than relying only on an ambient-temperature estimate.
Keep analog inputs, voltage references, and external clock paths away from switching nodes and high-current actuator traces. Use a continuous ground reference where possible and route sensitive signals over an uninterrupted reference plane. Because the PSoC 3 architecture includes configurable routing and high-speed digital functions, validate timing and analog performance on the final PCB with the intended clock configuration, firmware, and peripheral loading.
Confirm startup voltage, active current, sleep current, and brownout behavior for the exact operating mode before designing the supply. Decoupling values and permissible ESR should follow the manufacturer requirements for each power rail. Because this device includes analog conversion and programmable clocks, budget the power supply for transient demand while maintaining low ripple at the analog and digital supply pins.
Do not treat every similarly numbered CY8C32xx device as a substitute. Speed grade, memory configuration, pin assignments, package, temperature range, and peripheral resources must all match the intended design. Confirm the complete ordering code, use the manufacturer pin-definition table during schematic review, and verify that a proposed replacement requires no firmware, bootloader, or PCB changes.
Compliance Information
Compliance status was not stated in the manufacturer product-page summary or the listed distributor records. Request current material-compliance declarations and automotive qualification documentation for the exact ordering suffix before production release.