DSPIC33EP32GS505T-E/PT - 16-bit DSC 70MIPS Digital Power | Microchip
MPN: DSPIC33EP32GS505T-E/PT ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $4.75 | $4.75 |
| 10 | $4.4 | $44.00 |
| 100 | $4.1 | $410.00 |
| 500 | $3.85 | $1,925.00 |
| 1,000 | $3.6 | $3,600.00 |
DSPIC33EP32GS505T-E/PT Overview
A Digital Signal Controller merges the computational throughput of a DSP with the peripheral integration and control-oriented architecture of a microcontroller, sitting in the product hierarchy between a general-purpose MCU and a dedicated DSP. The dsPIC33EP family executes an enhanced 16-bit core with DSP multiply-accumulate instructions, making it a power-management IC controller rather than a power device itself: it generates the control loops that drive converters, PFC stages and inverters.
Key differentiating features include an interconnected high-speed PWM module purpose-built for switching power supplies, on-chip high-speed analog comprising ADC inputs with an integrated Programmable Gain Amplifier (PGA) and analog comparators, and a 3.0 V to 3.6 V supply range. The extended -40C to +125C rating of the /E temperature suffix supports industrial and automotive-adjacent environments.
Architecturally, the interconnected PWM, ADC/PGA and comparator blocks are designed to operate together with minimal CPU intervention, enabling fast inner current loops in peak-current-mode or average-current-mode topologies. This interconnect offloads the 70 MIPS core, allowing a single controller to manage multiple power stages with deterministic latency.
Typical applications include interleaved power factor correction, as demonstrated in Microchip's 350 W universal-input Interleaved PFC reference design built on the dsPIC33EP32GS505, plus LLC and phase-shifted full-bridge DC-DC converters, solar micro-inverters, and digital lighting ballasts.
When designing, reserve the dedicated PWM and analog-capable pins early in layout, since the interconnected PWM routing is pin-position dependent; decouple the 3.3 V rail locally at each supply pin pair.
This page synthesizes distributor pricing, same-family drop-in options, and practical digital-power design notes not consolidated in the manufacturer datasheet.
Drop-in alternatives for DSPIC33EP32GS505T-E/PT — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with DSPIC33EP32GS505T-E/PT (same form factor and footprint) — differing in Operating Temperature Range, Package, Product Family, Supply Voltage Range.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
DSPIC33EP32GS505T-I/PT
✅ Drop-In ⚠️ Specs Unverified✓ In Stock
$3.3 / Unit
View Datasheet →DSPIC33EP64GS505T-I/PT
✅ Drop-In ⚠️ Specs Unverified✓ In Stock
$4.85 / Unit
View Datasheet →DSPIC33EP16GS505T-I/PT
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
DSPIC33EP32GS504T-I/PT
✅ Drop-In ⚠️ Specs Unverified✓ In Stock
$3.26 / Unit
View Datasheet →DSPIC33EP32GS505-E/PT
✅ Drop-In ⚠️ Specs Unverified📋 Reference alternative (not in catalog)
DSPIC33EP32GS505T-E/PT Maximum Ratings & Electrical Characteristics
| Core | dsPIC33EP 16-bit DSC core |
| Core Processing Performance | 70 MIPS |
| Flash Memory | 32 KB |
| Supply Voltage Range | 3 V to 3.6 V |
| Operating Temperature Range | -40C to +125C (extended, /E suffix) |
| Package | 48-TQFP-EP (7x7 mm) with exposed pad |
| Mounting Type | Surface Mount |
| High-Speed PWM | Interconnected high-speed PWM for digital power |
| Analog Subsystem | High-speed ADC with Programmable Gain Amplifier (PGA) |
| Comparators | Analog comparators, interconnected with PWM |
| Product Family | dsPIC33EP32GS505 (Digital Power / SMPS DSC) |
| Programming Interface | ICSP (In-Circuit Serial Programming), MPLAB SNAP compatible |
| Debug Support | In-circuit debugging via MPLAB SNAP (2 I/O pins + reset) |
| Functional Safety Support | Listed as Functional Safety (FuSa) capable by Microchip/DigiKey |
DSPIC33EP32GS505T-E/PT 48-tqfp-ep (7x7 mm) with exposed pad Pin Configuration Guide
Pin configuration for DSPIC33EP32GS505T-E/PT (48-tqfp-ep (7x7 mm) with exposed pad package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for DSPIC33EP32GS505T-E/PT.
Refer to the datasheet for full pin configuration.
Typical Applications
DSPIC33EP32GS505T-E/PT is suitable for 6 applications: Interleaved Power Factor Correction, LLC and Phase-Shifted Full-Bridge DC-DC Converters, Solar Micro-Inverters and String Optimizers, Digital Lighting Ballasts and LED Drivers, Industrial Motor Drives and Servo Power Stages, Embedded Digital Power Development and Prototyping.
Interleaved Power Factor Correction
The DSPIC33EP32GS505T-E/PT is the controller in Microchip's own Interleaved PFC reference design, which accepts universal AC input and produces a single high-voltage DC output up to 350 W. The interconnected high-speed PWM drives two interleaved boost phases with phase-shifted switching to cancel input ripple current, while the high-speed ADC with PGA samples inductor current at loop rates far above a general-purpose MCU's capability. On-chip comparators provide cycle-by-cycle overcurrent protection without core latency, keeping the 70 MIPS core free for the outer voltage loop, power-factor and RMS calculations, and system housekeeping.
Recommended
LLC and Phase-Shifted Full-Bridge DC-DC Converters
For resonant LLC and phase-shifted full-bridge converters, the DSPIC33EP32GS505T-E/PT provides the frequency-modulation and phase-shift PWM resolution needed for soft-switching control. The dedicated high-speed PWM module generates complementary outputs with programmable dead time at nanosecond granularity, essential for preventing shoot-through in half-bridge legs. The ADC/PGA path samples output voltage and primary-side current for burst-mode and current-limit operation, and the extended -40C to +125C rating suits sealed telecom and server power supplies where ambient temperatures near the heatsink approach +85C, leaving the /E-grade headroom the /I-grade part lacks.
Recommended
Solar Micro-Inverters and String Optimizers
Grid-tied solar micro-inverters require simultaneous MPPT computation, DC-AC modulation and grid synchronization - a workload matched to the DSPIC33EP32GS505T-E/PT architecture. The 70 MIPS 16-bit DSP core executes proportional-resonant or repetitive-control modulation algorithms with multiply-accumulate support, while interconnected PWM channels produce the multi-level switching patterns. High-speed ADC channels with PGA scale and sense grid current and panel voltage with minimal external signal conditioning. The 3 V to 3.6 V supply integrates cleanly with isolated bias rails, and 32 KB Flash accommodates MPPT, anti-islanding and grid-code firmware in one die.
Recommended
Digital Lighting Ballasts and LED Drivers
High-intensity discharge ballasts and high-power LED drivers benefit from the DSPIC33EP32GS505T-E/PT's ability to run constant-current loops with fast PWM dimming. The interconnected comparator subsystem implements instantaneous overcurrent trip on LED string shorts, while the high-speed PWM supports both switching regulation and independent low-frequency dimming modulators from one controller. The extended temperature rating tolerates luminaire driver cavities that routinely exceed +85C, and the exposed-pad 48-TQFP dissipates controller heat into the driver PCB. 32 KB Flash holds dimming curves, DALI/0-10V interface code and protection state machines concurrently.
Recommended
Industrial Motor Drives and Servo Power Stages
Small motor drives and servo power stages use the DSPIC33EP32GS505T-E/PT to close torque and speed loops around a three-phase inverter. The interconnected PWM generates center-aligned, dead-time-compensated six-step or SVPWM patterns, while the PGA-ADC path samples phase currents with programmable gain matched to shunt or current-transformer signal levels. DSP multiply-accumulate instructions accelerate field-oriented control transforms within the 70 MIPS budget. The -40C to +125C rating covers unventilated industrial cabinets, and ICSP programming via MPLAB SNAP enables in-system firmware updates on installed drives without removing the controller from the board.
Recommended
Embedded Digital Power Development and Prototyping
The DSPIC33EP32GS505T-E/PT suits prototype digital-power platforms because Microchip's ecosystem around the dsPIC33EP32GS505 is mature: the MPLAB SNAP programmer connects over High-Speed USB 2.0 and an 8-pin SIL connector, using only two device I/O pins plus reset for in-circuit debugging and ICSP. Engineers can iterate control firmware on the same 48-TQFP footprint intended for production, then order the tape-and-reel part directly. The Functional Safety (FuSa) listing noted by Microchip and DigiKey additionally supports projects destined for safety-assessed industrial equipment, reducing documentation burden later in the development cycle.
Recommended
Recommended Products Summary
Engineering reference data for DSPIC33EP32GS505T-E/PT — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | DSPIC33EP32GS505T-I/PT | DSPIC33EP64GS505T-I/PT | DSPIC33EP16GS505T-I/PT | DSPIC33EP32GS504T-I/PT |
|---|---|---|---|---|---|
| Package | 48-TQFP-EP (7x7 mm) | 48-TQFP-EP (7x7 mm) - same | 48-TQFP-EP (7x7 mm) - same | 48-TQFP-EP (7x7 mm) - same | 48-TQFP-EP (7x7 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 32 KB | 32 KB | 64 KB | 16 KB | 32 KB |
| Core Performance | 70 MIPS (16-bit DSC) | 70 MIPS | 70 MIPS | 70 MIPS | 70 MIPS |
| Supply Voltage | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V | 3 V to 3.6 V |
| Operating Temperature | -40C to +125C (/E) | -40C to +85C (/I) | -40C to +85C (/I) | -40C to +85C (/I) | -40C to +85C (/I) |
| Digital Power Peripherals (PWM/ADC-PGA/Comparators) | Full interconnected high-speed set | Full set (identical die) | Full set | Full set | Reduced PWM channel count |
Key Differentiators
- Extended +125C operation in the same footprint (vs DSPIC33EP32GS505T-I/PT)
- Doubles program memory without redesign (vs DSPIC33EP16GS505T-I/PT)
- Full interconnected PWM/PGA/comparator digital-power peripheral set (vs DSPIC33EP32GS504T-I/PT)
Design Notes
On the 48-TQFP-EP package the interconnected high-speed PWM pins, ADC/PGA input pins and comparator inputs occupy fixed pin positions, so assign your converter's gate-driver and current-sense nets to these dedicated pins first before routing general I/O. The exposed pad under the 7x7 mm TQFP should be soldered to a ground array of thermal vias - in digital-power layouts it serves both as the controller's thermal path and as a low-inductance analog ground reference for the ADC/PGA front end.
The DSPIC33EP32GS505T-E/PT requires a 3.0 V to 3.6 V supply. In digital-power converters the controller rail is often derived from a small auxiliary flyback or LDO off the high-voltage bus; ensure this rail stays within range during brownout and startup, since PWM glitches at undervoltage can cause bridge shoot-through. Place 0.1 uF ceramic decoupling at each VDD/VSS pin pair plus one bulk capacitor near the package, and reference AVDD to a quiet supply or ferrite-filtered branch for ADC accuracy.
Reserve the PGD/PGC pins for the MPLAB SNAP ICSP header (8-pin SIL per Microchip's development-tool documentation); routing them to driver circuitry without isolation resistors blocks in-circuit debugging. Also note the MIPS rating discrepancy between retail listings (60 MIPs on one DigiKey description, 70 MIPS on Mouser) - consult the family datasheet VDD-vs-performance table and set your clock configuration conservatively, since exceeding the documented operating envelope at low VDD is a common root cause of marginal-field failures.
Compliance Information
Compliance data was not explicitly stated in the retrieved web data. Microchip standard production parts are typically RoHS-compliant; verify on the official Microchip product page before procurement.
