Analog Devices

LT1112IS8 - 750kHz Dual Precision Op Amp | Analog Devices

MPN: LT1112IS8 ✓ Active
160 µV Vdss Picoamp input Id 8-SOIC, 0.154 inch, 3.90 mm width Package
MOQ: 1 |

LT1112IS8 Overview

The Analog Devices LT1112IS8 is a dual general-purpose precision operational amplifier with two independent amplifiers, 750 kHz gain-bandwidth product, 0.3 V/µs slew rate, and a maximum input offset voltage of 160 µV in an 8-pin SOIC package. The device is designed for low-power instrumentation requiring picoamp-class input bias behavior, low offset, and accurate signal amplification.

An operational amplifier is a high-gain differential amplifier used to amplify a difference between two input voltages. Its common categories include precision amplifiers, transimpedance amplifiers, instrumentation amplifiers, and general-purpose amplifiers. Within the analog semiconductor hierarchy, the LT1112IS8 belongs to the operational-amplifier and signal-conditioning family. Its dual configuration provides two amplifiers in one package, reducing board area while preserving independent input, output, and supply connections for each channel.

The LT1112 family emphasizes low cost, low power, precision, and picoamp input characteristics. The LT1112IS8 provides a 750 kHz gain-bandwidth product and a 0.3 V/µs slew rate, making it appropriate for low-frequency measurement and signal-conditioning paths rather than high-speed communications. Maximum input offset voltage is 160 µV, while the associated product data identifies the part as a general-purpose amplifier in an 8-SO package. An industrial temperature option is represented by the IS8 ordering code.

The amplifier's precision-oriented design supports accurate closed-loop gain and low-level input conditioning. Picoamp input behavior is particularly valuable when the source is a high-impedance sensor, photodiode, or leakage-sensitive analog node. The dual architecture allows adjacent circuit sections to share a supply package, including independent instrumentation channels, buffer stages, active filters, or low-level sensor front ends. The 8-pin SOIC outline is also convenient for conventional surface-mount assembly.

Typical uses include precision current-to-voltage conversion, low-level sensor amplification, laboratory instrumentation, audio and measurement signal paths, bridge-amplifier interfaces, and general dual-channel analog conditioning. Selection should account for the 750 kHz bandwidth and 0.3 V/µs slew rate when setting closed-loop gain or operating against large capacitive loads. High-gain, high-frequency designs require additional stability analysis rather than treating the amplifier as a general high-speed comparator or rail-to-rail device.

For practical layout, keep input and feedback traces short, place decoupling capacitors near the supply pins, and route high-impedance input nodes away from switching nodes. Input bias-current compensation should use the manufacturer's recommended resistor values when source impedances are comparable. Avoid excessive resistive loading and long PCB leakage paths because those factors can undermine the benefit of picoamp input behavior.

This product page consolidates the key electrical characteristics, package details, replacement guidance, application guidance, and design considerations needed to evaluate the LT1112IS8. It also distinguishes the device from higher-bandwidth precision op amps and provides practical guidance for stable PCB implementation, source impedance selection, and drop-in replacement assessment.

Drop-in alternatives for LT1112IS8 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with LT1112IS8 (same form factor and footprint) — differing in Amplifier Type, Slew Rate, Gain-Bandwidth Product, Number of Circuits, Operating Temperature.

Analog Devices
Amplifier Type: J-FET
Slew Rate: 25 V/µs
Number of Circuits: 2
Compare with LT1112IS8 →
Analog Devices
Amplifier Type: Dual precision operational amplifier
Compare with LT1112IS8 →
Texas Instruments
Amplifier Type: Audio Operational Amplifier (SoundPlus)
Slew Rate: 20 V/us
Gain-Bandwidth Product: 8 MHz

LT1112S8

✅ Drop-In
Analog Devices
📦 8-SOIC
Dual precision operational amplifier · 2 · 750 kHz · 60 µV · 75 µV · 0.5 µV/°C · 250 pA · 0.3 µVP-P

Contact for price

View Datasheet →

LT1112CS8

✅ Drop-In
📦 8-SOIC
Same 750 kHz gain-bandwidth product, 0.3 V/µs slew rate, and 160 µV maximum offset class; ordering-grade temperature requirements differ and must be verified.

📋 Reference alternative (not in catalog)

OPA2134UA/2K5

✅ Drop-In
Texas Instruments
📦 8-SOIC
Audio Operational Amplifier (SoundPlus) · 2 · 0.00008% · 8 nV/rtHz · 5 pA (FET input) · 20 V/us · 8 MHz · 600 V/mV

Contact for price

View Datasheet →

LM4562

✅ Drop-In
📦 8-SOIC
Dual precision-amplifier alternative with a 340 µV maximum-offset advantage versus the target 160 µV limit when using 500 µV as the comparison maximum; bandwidth and bias-current checks remain required.

📋 Reference alternative (not in catalog)

AD8620ARZ

✅ Drop-In
Analog Devices
📦 8-SOIC
J-FET · 2 · Rail-to-Rail · 25 V/µs · 25 MHz · 1 pA · 100 µV · 3.5 mA (x2 channels)

Contact for price

View Datasheet →

LT1112IS8 Maximum Ratings & Electrical Characteristics

Amplifier Type General-purpose precision operational amplifier
Number of Circuits 2 circuits
Number of Amplifiers 2 amplifiers
Gain-Bandwidth Product 750 kHz
Slew Rate 0.3 V/µs
Maximum Input Offset Voltage 160 µV
Input Bias Current Class Picoamp input
Power Class Low power
Package Type 8-SOIC, 0.154 inch, 3.90 mm width
Mounting Type Surface mount
Number of Pins 8 pins
RoHS Status unknown
REACH Status unknown

LT1112IS8 Pin Configuration

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 OUTA — Amplifier A output
Pin 2 -INA — Inverting input for amplifier A
Pin 3 +INA — Noninverting input for amplifier A
Pin 4 V- — Negative supply connection
Pin 5 +INB — Noninverting input for amplifier B
Pin 6 -INB — Inverting input for amplifier B
Pin 7 OUTB — Amplifier B output
Pin 8 V+ — Positive supply connection

Typical Applications

LT1112IS8 is suitable for 6 applications: Precision Current-to-Voltage Conversion, High-Impedance Sensor Conditioning, Laboratory Instrumentation, Bridge Sensor Amplification, Active Filtering and Signal Conditioning, Audio and Low-Level Analog Paths.

🔧

Precision Current-to-Voltage Conversion

The LT1112IS8 fits a transimpedance front end where a low-level sensor current must be converted into a measurable voltage. Its picoamp-input positioning is useful with high source impedances, while the 160 µV maximum offset limits input-referred error after the required transimpedance gain is applied. The amplifier is used with a feedback resistor and optional compensation capacitor selected from the manufacturer’s application guidance. The main performance check is bandwidth: the 750 kHz gain-bandwidth product must exceed the closed-loop bandwidth created by the feedback network. The 0.3 V/µs slew rate also limits large-signal response, so the design should avoid treating this precision device as a high-speed transimpedance amplifier.

🧩

High-Impedance Sensor Conditioning

The LT1112IS8 can condition outputs from high-impedance sensors where input bias current and offset error are more important than high bandwidth. Picoamp input behavior helps preserve sensor integrity, while the 160 µV maximum input offset voltage supports stable measurement of small differential signals. Place the amplifier close to the sensor or connector, shorten the input conductors, and protect the board from contamination when leakage paths could rival the device’s input-current characteristics. Source impedances should also be balanced where practical, with bias-current compensation applied according to the datasheet. The 750 kHz bandwidth is adequate for many environmental and laboratory sensors but not for high-bandwidth piezoelectric or optical signals without additional stages.

🖥️

Laboratory Instrumentation

The LT1112IS8 is suitable for buffering and gain stages in precision laboratory instruments where dual-channel economy helps reduce PCB area. The two independent channels can handle related measurement inputs, reference buffering, or amplifier outputs within one 8-pin SOIC package. Its 750 kHz gain-bandwidth product supports low-frequency measurement paths, and picoamp input behavior is advantageous when source impedances are high. However, the 0.3 V/µs slew rate means large output excursions settle relatively slowly, making the device better for DC and low-frequency accuracy than for wideband laboratory signals. Designers should include output loading, capacitor compensation, and grounding considerations in the amplifier stability analysis.

🏭

Bridge Sensor Amplification

The LT1112IS8 can provide differential gain and buffering for resistive bridge sensors in which the useful signal is small relative to common-mode voltage. The 160 µV maximum offset helps reduce input-referred measurement error, while the dual channel allows paired amplification or differential-to-single-ended signal processing when the selected configuration supports that use. The 750 kHz bandwidth is suitable for many temperature, pressure, and force measurements with modest bandwidth requirements. Critical design checks include bridge excitation noise, input common-mode range, source-impedance balance, and input-bias-current effects. Because the LT1112 is not specified as rail-to-rail, the bridge excitation and output levels must remain within the manufacturer’s guaranteed operating region.

📻

Active Filtering and Signal Conditioning

The LT1112IS8 is appropriate for low-frequency active filters and general signal-conditioning blocks where precision offset and low input current are important. Two amplifiers in one package can implement cascaded stages, buffered filters, or coordinated gain paths while sharing supply pins. The 750 kHz gain-bandwidth product determines the upper practical operating range for each closed-loop gain, and the 0.3 V/µs slew rate constrains large-signal behavior. Filter-component tolerances and op-amp gain error should therefore be evaluated together rather than treating the nominal bandwidth as the complete stability criterion. Keep feedback loops compact, verify capacitive-load stability using the manufacturer's guidance, and bypass the supply pins locally to prevent coupled noise from degrading the measured signal.

🎧

Audio and Low-Level Analog Paths

The LT1112IS8 can serve in low-level audio and analog conditioning paths when the design prioritizes low offset, picoamp input behavior, and low power over wide bandwidth. The dual channel may be used for independent signal stages or as a stereo pair in line-level circuitry. Its 0.3 V/µs slew rate is conservative for high-fidelity audio applications, but it remains suitable for many tone and control-signal paths operating at lower frequencies. The 160 µV maximum offset is small relative to common audio signal levels, while picoamp input behavior can help when the source is high impedance. The design should still account for output swing, noise performance, channel-to-channel matching, and the load presented by the following audio stage.

Recommended Products Summary

LT1112S8 Analog Devices Used in: Precision Current-to-Voltage Conversion, Laboratory Instrumentation, Active Filtering and Signal Conditioning, Audio and Low-Level Analog Paths AD8620 Precision dual-amplifier alternative for front-end evaluation Used in: Precision Current-to-Voltage Conversion, High-Impedance Sensor Conditioning, Bridge Sensor Amplification LT1112CS8 Same-family dual precision amplifier option Used in: High-Impedance Sensor Conditioning, Bridge Sensor Amplification LM4562 Dual precision amplifier alternative for evaluation Used in: Laboratory Instrumentation OPA2134 Dual precision amplifier alternative Used in: Active Filtering and Signal Conditioning, Audio and Low-Level Analog Paths
What is the LT1112IS8?
The LT1112IS8 is a dual low-power precision operational amplifier with picoamp input characteristics, a 750 kHz gain-bandwidth product, and an 8-pin SOIC package. According to the Analog Devices LT1112 datasheet, it contains two independent general-purpose amplifier channels intended for precision signal conditioning and low-level analog measurements.
What are the key specifications of LT1112IS8 that engineers should know?
The LT1112IS8 provides two amplifier channels, 750 kHz gain-bandwidth product, 0.3 V/µs slew rate, and a maximum input offset voltage of 160 µV. The Analog Devices datasheet also identifies the device as a low-power, picoamp-input precision op amp supplied in an 8-SOIC package for surface-mount assembly.
Where can I download the LT1112IS8 datasheet PDF?
The official LT1112IS8 datasheet PDF is available from Analog Devices through the linked product datasheet on this page. It describes the LT1112 dual and LT1114 quad low-power precision, picoamp-input operational amplifiers and contains the package, pin-configuration, electrical, and application information needed for design review.
Where can I find the LT1112IS8 pinout?
The LT1112IS8 uses the standard dual-op-amp pin configuration in the 8-pin SOIC outline. Use the pin-description and connection diagrams in the Analog Devices datasheet when assigning PCB tracks, particularly because supply pins and the two amplifier channels have fixed positions in the standard package.
Is LT1112IS8 suitable for high-impedance sensor measurement?
Yes, the LT1112IS8 is suitable for many high-impedance sensor front ends because the family is characterized by picoamp input behavior. Its 160 µV maximum input offset voltage and 750 kHz bandwidth support accurate low-level conditioning, while the actual system accuracy still depends on source impedance, leakage, bias-current compensation, and sensor output impedance.
Where can I buy LT1112IS8 online?
Use the Request a Quote form on this page to request LT1112IS8 availability, current lead time, and commercial terms. The request should include the desired quantity, tube or tape-and-reel packaging preference, and any date-sensitive production requirements so the supplier can confirm the correct exact MPN.
What is the price of LT1112IS8?
Current LT1112IS8 pricing is obtained through the Request a Quote form on this page because transactional pricing changes with quantity, availability, and packaging. Submit the required part number and quantity, and request a unit-price breakdown for production planning or comparison.
What is the lead time for LT1112IS8?
Request the current LT1112IS8 lead time through the Request a Quote form on this page. Include quantity, package preference, annual usage, and required delivery date because scheduling can vary with order size and manufacturing availability.
Is LT1112IS8 in stock?
Use the Request a Quote form on this page to check current LT1112IS8 stock and allocation status. Confirm the exact LT1112IS8 ordering code and required packaging with the supplier before treating an availability response as a firm production allocation.
What can replace the LT1112IS8?
The closest same-family replacements are LT1112S8 and LT1112CS8, which retain the dual SOIC architecture and key precision characteristics of the LT1112IS8. For any proposed substitute, verify supply voltage, common-mode range, offset voltage, bias current, stability, package, and pin configuration before treating it as a drop-in replacement.
Is LT1112IS8 the same as LT1112S8?
The LT1112IS8 and LT1112S8 belong to the same dual LT1112 amplifier family and use the 8-pin SOIC architecture, but their ordering codes can denote different grade or qualification conditions. Compare the manufacturer datasheet ordering table before substitution, especially for operating temperature and production requirements.
What is the best Analog Devices equivalent for LT1112IS8?
LT1112S8 and LT1112CS8 are the closest Analog Devices alternatives identified for the LT1112 family. They preserve the dual precision-amplifier format and SOIC footprint, while their ordering codes may represent different grade requirements. Confirm electrical and temperature limits in the Analog Devices datasheet before approval.
LT1112IS8 versus LT1112CS8: which is better for industrial equipment?
The LT1112IS8 is the logical choice when the LT1112 industrial-grade ordering option is required for the equipment environment; LT1112CS8 may instead be appropriate for a commercial-grade design. The decisive comparison is the ordering table and temperature qualification in the manufacturer datasheet, not the shared 8-pin package alone.
When should I choose LT1112IS8 instead of LT1112S8?
Choose LT1112IS8 when the specified grade and operating environment require the industrial ordering option. Choose LT1112S8 when its documented temperature and qualification limits satisfy the product requirements and procurement prefers that grade. Both retain the same dual SOIC architecture, so the selection should be based on guaranteed operating limits rather than pin compatibility alone.
Can a dual precision op amp replace LT1112IS8 without PCB changes?
A dual precision op amp can replace the LT1112IS8 without PCB changes only if it has an equivalent SOIC-8 pinout, compatible supply range, acceptable common-mode range, and adequate offset, noise, bias-current, bandwidth, and stability performance. The LT1112S8 and LT1112CS8 are the strongest family options, but the manufacturer datasheet must be checked for every production build.
Does LT1112IS8 support RoHS and AEC-Q100 applications?
The LT1112IS8 product documentation does not identify it as an AEC-Q100-qualified automotive part, and the available product information does not provide a definitive RoHS or REACH status. Treat those compliance fields as unknown until the current manufacturer declaration or customer-specific material documentation is obtained.

Engineering reference data for LT1112IS8 — comparison, design guidance, and compliance information.

Selection Guide

Choose the LT1112IS8 for dual-channel, low-level precision measurements requiring picoamp-input behavior, low offset, and an industrial ordering option. Its 750 kHz gain-bandwidth product and 0.3 V/µs slew rate make it most suitable for slow sensor, bridge, buffer, and instrumentation paths rather than high-speed signal chains. LT1112S8 is the first same-family alternative when its documented grade and temperature requirements satisfy the design and the industrial ordering option is unnecessary. LT1112CS8 offers another same-family footprint choice, but commercial-versus-industrial operating requirements should be checked against the ordering table. OPA2134, LM4562, and AD8620 may suit wider-bandwidth or lower-offset applications, but their supply range, input bias, output swing, noise, and stability characteristics must be checked before production substitution.

Comparison with Alternatives

Parameter This Product LT1112S8 LT1112CS8 OPA2134 LM4562 AD8620
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Brand Analog Devices Analog Devices Analog Devices Texas Instruments Texas Instruments Analog Devices
Number of Amplifiers 2 2 2 2 2 2
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount Surface mount

Key Differentiators

  • Combines two picoamp-input precision channels in one 8-SOIC package (vs LT1112S8)
  • Matches the same-family bandwidth and slew-rate performance (vs LT1112CS8)
  • Lower maximum input offset than LM4562 comparison class (vs LM4562)
  • Established dual SOIC footprint with standard pin configuration (vs AD8620)

Design Notes

Route the noninverting and inverting inputs as short, guarded traces, especially when the LT1112IS8 drives a high-impedance source. Keep feedback components close to their associated pins, avoid routing beneath noisy switching nodes, and use a continuous ground reference rather than a fragmented signal-ground plane. Picoamp input behavior can preserve sensor accuracy, but contaminated board leakage and long exposed connections may still create errors comparable to the measured signal.

Do not select the LT1112IS8 solely by its offset-voltage rating. Confirm supply voltage, input common-mode range, output swing, load current, operating temperature, and stability with the intended feedback network. The 750 kHz gain-bandwidth product and 0.3 V/µs slew rate make the device most appropriate for low-frequency precision paths. Applying a higher closed-loop gain or driving a large capacitive load without stability analysis can produce errors that offset-voltage specifications alone will not reveal.

Place the supply-bypass capacitor directly between each supply pin and the corresponding ground reference, with the shortest possible ground return. Keep sensitive input and feedback nodes away from the capacitor and regulator-current paths. If bias-current compensation is required, use the resistor values specified by the manufacturer and ensure the two input source impedances remain reasonably matched, since unmatched impedances convert input-current error into an offset-like measurement error.

Evaluate settling time from both bandwidth and slew-rate limits rather than relying on the 750 kHz gain-bandwidth product alone. For a required closed-loop bandwidth, the available amplifier gain-bandwidth product should include the necessary noise-gain margin and phase margin. Use the manufacturer’s recommended compensation for capacitive loading, and measure the completed channel for oscillation, output clipping, and settling under the actual source and load conditions.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified in the manufacturer product material. The LT1112IS8 is not identified as an AEC-Q100-qualified automotive option.

Data verified on: 2026-11-19 — data verified and curated by XAIPART's component engineering team

Related Searches

lt1112is8 pbf LT1112IS8 datasheet LT1112IS8 datasheet pdf LT1112IS8 pinout LT1112IS8 equivalent LT1112IS8 replacement LT1112IS8 cross reference LT1112IS8 vs LT1112S8 LT1112IS8 footprint LT1112IS8 application circuit LT1112IS8 price Analog Devices LT1112IS8

Related Components & Terms

Analog Devices LT1112IS8 LT1112 LT1112S8 LT1112CS8 OPA2134 LM4562 AD8620 operational amplifier precision amplifier general-purpose amplifier dual amplifier low-dropout analog signal conditioning picoamp input input bias current input offset voltage gain-bandwidth product slew rate transimpedance amplifier high-impedance sensor bridge sensor active filter 8-SOIC SOIC package family surface mount RoHS REACH AEC-Q100 low-power precision analog
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details