MCF5270VM100 - ColdFire V2 100MHz MCU 196-LBGA | NXP
MPN: MCF5270VM100 ✗ End of Life| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $35.23 | $35.23 |
| 10 | $31.71 | $317.10 |
| 100 | $28.54 | $2,854.00 |
| 500 | $25.69 | $12,845.00 |
| 1,000 | $23.12 | $23,120.00 |
MCF5270VM100 Overview
A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, forming the lowest tier of the embedded processing hierarchy: MCU -> embedded processor -> microprocessor -> system-on-chip. The ColdFire V2 architecture is a reduced instruction set computing (RISC) core derived from the classic 68K family, widely used in industrial control, networking, and connectivity applications.
Key features of the MCF5270VM100 include the 100 MHz V2 ColdFire core with an enhanced multiplier-accumulator (eMAC) for DSP-style arithmetic, 64 KB x 8 SRAM for zero-wait-state code and data buffering, and a highly integrated peripheral set covering connectivity and control functions. The ROMless memory configuration allows code to execute entirely from external flash, giving designers full flexibility in program size and update strategy. An external oscillator type clocking scheme and multiple serial interfaces make it well suited to cost-sensitive, power-conscious designs.
Technically, the MCF527x family combines high integration with low cost, delivering a new level of performance on the popular ColdFire V2 core. According to NXP, the combination of connection, protection, and peripheral selection makes the MCF527 ideal for applications requiring significant control processing for file management, connectivity, data buffering, and user interfaces.
Typical applications include industrial control systems, network connectivity and data-buffering nodes, and embedded human-machine interfaces where 100 MHz of 32-bit processing and rich peripherals are required at minimal system cost.
A key design consideration is that this part is classified NRND (Not Recommended for New Designs) by NXP, so new projects should evaluate the drop-in family alternatives listed below.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
Drop-in alternatives for MCF5270VM100 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with MCF5270VM100 (same form factor and footprint) — differing in Package, Number of I/O, RoHS Status, Connectivity, DMA.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
MCF5271CVM100
✅ Drop-In ⚠️ Specs Unverified✓ In Stock
$17.6 / Unit
View Datasheet →MCF5232CVM100
✅ Drop-In✓ In Stock
$19.2 / Unit
View Datasheet →MCF5234CVM100
✅ Drop-In✓ In Stock
$12.1 / Unit
View Datasheet →MCF5235CVM100J
✅ Drop-In✓ In Stock
$15.95 / Unit
View Datasheet →MCF5272VF66J
✅ Drop-In✓ In Stock
$9.95 / Unit
View Datasheet →MCF52100CVM80
✅ Drop-In✓ In Stock
$3.78 / Unit
View Datasheet →MCF5270VM100 Maximum Ratings & Electrical Characteristics
| Core Processor | ColdFire V2 (MCF527x) |
| Core Size | 32-Bit |
| Speed | 100 MHz |
| Program Memory Type | ROMless |
| RAM Size | 64K x 8 |
| Number of I/O | 61 |
| Oscillator Type | External |
| Package / Case | 196-LBGA (15x15 mm MAPBGA) |
| Mounting Type | Surface Mount |
| Packaging | Tray |
| Supplier Device Package | 196-MAPBGA |
| Lifecycle Status | NRND (Not Recommended for New Designs) |
MCF5270VM100 196-mapbga Pin Configuration Guide
Pin configuration for MCF5270VM100 (196-mapbga package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for MCF5270VM100.
Refer to the datasheet for full pin configuration.
Typical Applications
MCF5270VM100 is suitable for 6 applications: Industrial Control Systems, Network Connectivity Nodes, Embedded File Management Systems, Building Automation Controllers, Test and Measurement Instrumentation, Legacy System Maintenance and Repair.
Industrial Control Systems
The MCF5270VM100 fits industrial control applications because its 100 MHz 32-bit ColdFire V2 core delivers deterministic control-loop performance while the 64 KB on-chip SRAM provides zero-wait-state workspace for PID state variables and communication buffers. With 61 I/O lines, it directly drives relays, sensors, and operator panels without extra glue logic. In a typical PLC or motor-control node, the processor runs the control firmware from external flash while buffering process data in SRAM; the integrated peripheral set handles serial links to drives and HMIs. The trade-off is NRND status - design in a documented migration path to the MCF5271 family or ARM-based successors for long-lifetime products.
Recommended
Network Connectivity Nodes
For network connectivity and data-buffering nodes, the MCF5270VM100 aligns well: NXP positions the MCF527x specifically for file management, connectivity, and data-buffering workloads. The 100 MHz V2 core sustains protocol stack execution while the 64 KB SRAM absorbs burst traffic between the external bus and serial interfaces, smoothing throughput mismatches. The ROMless architecture lets network firmware live in large external flash, enabling field updates of protocol stacks without package constraints. Designers should budget bus bandwidth carefully, since code fetches from external memory compete with data DMA; placing hot code sections in on-chip SRAM mitigates this. Verify Ethernet MAC support against the exact family variant selected.
Recommended
Embedded File Management Systems
The MCF5270VM100 suits embedded file-management applications - data loggers, gateways, and mass-storage bridges - because its 100 MHz core and eMAC-class arithmetic handle FAT filesystem processing and CRC computation efficiently. The 64 KB SRAM serves as sector caches and directory buffers, while the external bus interfaces to large NAND/NOR flash or IDE media. NXP's positioning of the MCF527 for file management and user interfaces reflects exactly this use case. Performance consideration: sustained file throughput depends on external bus width and wait states; use 16-bit or 32-bit flash and enable burst mode where supported to avoid starving the core during code fetches.
Recommended
Building Automation Controllers
In building automation - HVAC controllers, access panels, and energy meters - the MCF5270VM100 provides a balance of 100 MHz processing power for protocol stacks (BACnet, Modbus) and low system cost in the compact 15x15 mm 196-MAPBGA footprint. The 61 I/O lines interface keypads, displays, and actuator drivers directly, while the external oscillator scheme supports accurate real-time clocking from an external RTC source. The ROMless memory model suits firmware that must be field-updatable over the network. Trade-off: as an NRND part, it should be reserved for service replacements; new building-automation designs should start on the MCF5271 family or a modern ARM Cortex-M equivalent.
Recommended
Test and Measurement Instrumentation
Bench instruments, data acquisition front-ends, and portable meters benefit from the MCF5270VM100's 100 MHz 32-bit core, which manages measurement sequencing, scaling math, and UI rendering while streaming results over serial links. The 64 KB SRAM holds waveform capture buffers and calibration tables, and the 61 I/O lines control multiplexers, relays, and indicator hardware. ColdFire's 68K heritage means mature toolchains (CodeWarrior, GCC) support rapid firmware development for instrument logic. Because code executes from external flash, layout the memory bus short and controlled-impedance to preserve timing margins at 100 MHz; keep stub lengths under a few centimeters for signal integrity.
Recommended
Legacy System Maintenance and Repair
A primary ongoing use of the MCF5270VM100 is sustaining engineering: repairing and extending installed industrial, medical, and networking equipment designed around the MCF527x. Distributor stock (approximately 4,640 pieces at Heisener as of 2026-10-18) plus the Rochester Electronics last-time-buy channel support service inventories. Because the part is NRND, procurement teams should size a final buy covering the remaining service life of the installed base, typically several years of field failures plus spares. When stock is exhausted, the drop-in family alternatives (MCF5271, MCF523x in the same 196-MAPBGA) allow same-footprint servicing with minor firmware verification.
Recommended
Recommended Products Summary
Engineering reference data for MCF5270VM100 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | MCF5271CVM100 | MCF5232CVM100 | MCF5234CVM100 | MCF52100CVM80 |
|---|---|---|---|---|---|
| Package | 196-LBGA (15x15 mm MAPBGA) | 196-MAPBGA - same | 196-MAPBGA - same | 196-MAPBGA - same | 196-MAPBGA - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Speed | 100 MHz | 100 MHz | 100 MHz | 100 MHz | 80 MHz |
| Core Architecture | ColdFire V2, 32-bit | ColdFire V2, 32-bit | ColdFire V3, 32-bit | ColdFire V3, 32-bit | ColdFire V2, 32-bit |
| Program Memory | ROMless (external flash) | ROMless (external flash) | ROMless (external flash) | ROMless (external flash) | On-chip flash |
| CAN Module | No | No | Yes (CAN 2.0) | Yes (CAN 2.0) | No |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND |
Key Differentiators
- Highest integration in ColdFire V2 class at 100 MHz (vs MCF5272VF66)
- ROMless flexibility for large external code images (vs MCF52100CVM80)
- Trade-off: no CAN controller (vs MCF5232CVM100)
Design Notes
The MCF5270VM100 is NRND per the NXP product page. Do not start new production designs with this part; instead qualify MCF5271CVM100 (same MCF527x family and 196-MAPBGA footprint) and secure a last-time-buy quantity covering the full expected service life. Existing designs should document a migration test plan - verify peripheral register compatibility and re-run firmware regression before switching to any alternative.
Because the MCF5270 is ROMless, all code executes from external flash across the chip-select bus. At 100 MHz, the external memory interface is the critical signal-integrity zone: keep address/data traces length-matched, maintain solid ground return planes under the bus, and hold trace stubs short. Estimated rule of thumb: at 100 MHz, keep flash-to-MCU trace lengths under roughly 10 cm with series termination (22-33 ohm) on rising-edge-critical signals to control ringing and overshoot.
The device uses an external oscillator, so budget a clean clock source with short, guarded routing to the oscillator input pin. Decouple all 196-MAPBGA power balls with a network of at least 0.1 uF ceramics placed directly beneath the BGA via fan-out, plus bulk capacitance near the package. Estimated: coldFire-class cores of this generation draw on the order of 1-2 mA/MHz; confirm exact core and I/O supply currents in the NXP MCF527x datasheet power chapter before sizing the regulator.
The 196-ball MAPBGA (15x15 mm, ~1.0 mm ball pitch class) requires a dedicated BGA land pattern with via-in-pad or dog-bone fan-out on the inner rows. Follow the land pattern in the NXP MCF527x package/datasheet documentation exactly; deviations void fit on the same footprint when substituting family members. Use 4+ layer stackup with dedicated ground plane to support the external bus return currents and reduce EMI from 100 MHz harmonics.
Compliance Information
Compliance data not published in the retrieved web data. The NXP product page lists an Environmental Quality section - consult nxp.com/part/MCF5270VM100 for official RoHS/REACH status of this NRND part.
