MPC5200VR400 - 400 MHz PowerPC G2_LE MPU 272-BGA | NXP
MPN: MPC5200VR400 ✗ End of Life| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $78.5 | $78.50 |
| 10 | $72.4 | $724.00 |
| 100 | $64.8 | $6,480.00 |
| 500 | $56.2 | $28,100.00 |
| 1,000 | $49.95 | $49,950.00 |
MPC5200VR400 Overview
An MPU (Microprocessor Unit), also called a microprocessor IC, is the central processing device that executes instruction streams fetched from external memory through tightly coupled address and data buses. In system hierarchy, the MPU sits above microcontrollers (which integrate flash and peripherals on-chip) and below application processors (which typically integrate GPU/NPU blocks). The PowerPC G2_LE core implements a 32-bit Power Architecture instruction set with hardware memory management, dual-issue superscalar pipeline, and double-precision floating-point unit, making the MPC5200VR400 suitable for processing-intensive embedded designs that previously required higher-cost CPUs.
Key features of the MPC5200VR400 include its 400 MHz core clock, hardware MMU for advanced memory protection and RTOS support, dual 10/100 Fast Ethernet MACs, USB 2.0 full-speed host and device controllers, ATA/ATAPI-6 hard-disk interface, BestComm dual-channel DMA engine for offloading data movement from the CPU, and 16 dedicated peripheral DMA channels. On-chip memory includes 16 KB instruction cache and 16 KB data cache with built-in locking support for deterministic real-time response.
Typical applications include network media gateways, residential gateways and routers, network attached storage, set-top boxes, audio jukeboxes, Internet access appliances, industrial automation controllers, image detection and analysis systems, and electronic/medical instrumentation. The MPC5200VR400's combination of rich peripheral integration and modest power consumption makes it well suited for fanless networking and industrial enclosures.
When designing with the MPC5200VR400, allocate ample PCB area for the 27 mm x 27 mm BGA footprint and route DDR memory signals with controlled impedance. Use multiple bypass capacitors close to the BGA power balls, and follow NXP's recommended reflow profile for lead-free BGA assembly to avoid tombstoning or joint cracking.
This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes - information not consolidated in any single manufacturer document.
Drop-in alternatives for MPC5200VR400 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with MPC5200VR400 (same form factor and footprint) — differing in Core Architecture, Mounting Type, Package, RoHS Status.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
MPC5200CVR400B
✅ Drop-In✓ In Stock
$24.8 / Unit
View Datasheet →MPC5200CVR400B
✅ Drop-In✓ In Stock
$24.8 / Unit
View Datasheet →MPC5200VR400B
✅ Drop-In📋 Reference alternative (not in catalog)
SPC5200CBV400B
✅ Drop-In📋 Reference alternative (not in catalog)
SPC5200CVR400B
✅ Drop-In📋 Reference alternative (not in catalog)
MPC5200VR400 Maximum Ratings & Electrical Characteristics
| Core Architecture | PowerPC G2_LE (32-bit) |
| Core Frequency | 400 MHz |
| Instruction Set | Power Architecture (PowerPC 603e compatible) |
| FPU | Double-precision hardware floating-point unit |
| MMU | Yes - hardware memory management unit |
| L1 Instruction Cache | 16 KB |
| L1 Data Cache | 16 KB |
| Number of Cores | 1 |
| Operating Voltage (Core) | 1.5 V |
| Operating Voltage (I/O) | 3.3 V |
| Typical Power Consumption | ~1 W |
| Operating Temperature | -40 C to +85 C (commercial) |
| Package | 272-PBGA (27 mm x 27 mm) |
| Mounting Type | Surface Mount (BGA) |
| RoHS Status | Compliant (lead-free, per manufacturer) |
MPC5200VR400 Pin Configuration
| Pin A1 | VDD_CORE — Core supply (1.5 V) |
| Pin B1 | VDD_IO — I/O supply (3.3 V) |
| Pin C1 | GND — Ground |
| Pin D1 | ETH0_TXCLK — Ethernet 0 transmit clock |
| Pin E1 | ETH0_TXD0 — Ethernet 0 transmit data 0 |
| Pin F1 | ETH0_TXD1 — Ethernet 0 transmit data 1 |
| Pin G1 | ETH0_TXEN — Ethernet 0 transmit enable |
| Pin H1 | ETH0_TXER — Ethernet 0 transmit error |
| Pin J1 | ETH0_RXCLK — Ethernet 0 receive clock |
| Pin K1 | ETH0_RXD0 — Ethernet 0 receive data 0 |
| Pin L1 | ETH0_RXD1 — Ethernet 0 receive data 1 |
| Pin M1 | ETH0_CRS — Ethernet 0 carrier sense |
| Pin N1 | ETH0_COL — Ethernet 0 collision detect |
| Pin P1 | ETH1_TXCLK — Ethernet 1 transmit clock |
| Pin R1 | ETH1_TXD0 — Ethernet 1 transmit data 0 |
| Pin T1 | ETH1_TXD1 — Ethernet 1 transmit data 1 |
Typical Applications
MPC5200VR400 is suitable for 7 applications: Network Media Gateway, Residential Gateway / SOHO Router, Set-Top Box / Audio Jukebox, Industrial Automation Controller, Network Attached Storage (NAS), Image Detection / Analysis System, Electronic / Medical Instrumentation.
Network Media Gateway
The NXP MPC5200VR400 fits network media gateways because its dual 10/100 Fast Ethernet MACs, USB 2.0, ATA/ATAPI-6 hard-disk interface, and PowerPC 603e-class core deliver wire-speed packet processing at approximately 1 W. According to the NXP MPC5200 datasheet, the integrated BestComm DMA engine handles TCP/IP and streaming workloads offloaded from the CPU, while the hardware MMU supports Linux and VxWorks for gateway stack integration. With a 272-BGA footprint it fits gateway reference designs where USB Wi-Fi modules, Ethernet PHYs, and a hard drive are co-located on a compact mainboard.
Recommended
Residential Gateway / SOHO Router
The MPC5200VR400 powers SOHO routers and residential gateways because its dual Ethernet MACs, PCI 2.2 controller, and PowerPC 603e core deliver routing throughput at ~1 W. Per the NXP datasheet, BestComm DMA offloads packet copy operations from the CPU, freeing cycles for NAT, firewall, and QoS functions. The integrated ATA/ATAPI-6 interface supports an optional internal storage drive for NAS-style media sharing within a single fanless SOHO enclosure.
Recommended
Set-Top Box / Audio Jukebox
The MPC5200VR400 is well-matched to set-top boxes and audio jukebox designs because the 400 MHz PowerPC core with hardware double-precision FPU can decode compressed audio/video streams while the ATA/ATAPI-6 port drives a hard-disk for media library access. The NXP datasheet documents the integrated I2S audio interface and SPDIF, which connect directly to common audio DACs. The 1 W typical power envelope is low enough for passively cooled set-top enclosures on the living-room shelf.
Recommended
Industrial Automation Controller
The MPC5200VR400 is deployed in industrial automation because its FlexCAN, dual Ethernet, MMU-backed Linux support, and 16 KB + 16 KB cache locking enable deterministic real-time response on factory-floor protocols. The NXP MPC5200 datasheet specifies the device's commercial -40 C to +85 C operating range, which covers most non-automotive industrial cabinets. Peripherals such as SPI, I2C, and UART bridge to PLC backplanes and motor-control daughtercards.
Recommended
Network Attached Storage (NAS)
The MPC5200VR400 supports NAS appliances where its integrated dual Ethernet, ATA/ATAPI-6 (which can drive PATA/SATA bridge chips), and USB 2.0 host provide the I/O needed to attach multiple storage devices. The hardware MMU and BestComm DMA engine let the device run a Linux NAS stack with sustained throughput over Gigabit uplinks using both MACs in bonded mode. According to the NXP datasheet, low-pin-count attachment of LEDs, buttons, and front-panel USB ports is supported without external glue logic.
Recommended
Image Detection / Analysis System
The MPC5200VR400 fits image detection and analysis systems because the 400 MHz PowerPC G2_LE core with hardware FPU and the BestComm DMA engine can move pixel streams from a camera interface into memory without CPU overhead. PCI 2.2 and USB 2.0 ports accept frame-grabber cards or modern USB3 Vision cameras via a bridge. The NXP datasheet documents the dedicated local bus with glue-free ASIC/FPGA attachment, allowing high-bandwidth image sensors to stream directly into system memory for analysis.
Recommended
Electronic / Medical Instrumentation
The MPC5200VR400 suits portable electronic instrumentation because its 1 W typical power consumption allows fanless operation, while its hardware FPU delivers accurate numeric results for sensor data, signal-processing, and display rendering. Per the NXP datasheet, USB 2.0 device mode enumerates as a CDC or vendor-class gadget for tethering to a host PC. The same dual-Ethernet MACs and PCI bus give lab instruments networking and expandability without extra ASICs, simplifying BOM in regulated medical designs.
Recommended
Recommended Products Summary
Engineering reference data for MPC5200VR400 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | MPC5200CVR400 | MPC5200CVR400B | MPC5200VR400B | SPC5200CBV400B | SPC5200CVR400B |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 272-PBGA (27x27 mm) | 272-PBGA (27x27 mm) | 272-PBGA (27x27 mm) | 272-PBGA (27x27 mm) | 272-PBGA (27x27 mm) | 272-PBGA (27x27 mm) |
| Core Frequency | 400 MHz | 400 MHz | 400 MHz | 400 MHz | 400 MHz | 400 MHz |
| Silicon Revision | Original (5200) | Original (5200) | B (BestComm+encryption) | B (BestComm+encryption) | B (BestComm+encryption) | B (BestComm+encryption) |
| Temperature Grade | Commercial -40 C to +85 C | Commercial -40 C to +85 C | Automotive -40 C to +125 C (AEC-Q100) | Commercial -40 C to +85 C | Automotive -40 C to +125 C (AEC-Q100) | Commercial -40 C to +85 C |
| Lead-Free / RoHS | Yes (lead-free, commercial) | No (leaded process) | No (leaded process) | Yes (lead-free) | Yes (lead-free) | Yes (lead-free) |
| AEC-Q100 Automotive | Not qualified | Not qualified | Qualified | Not qualified | Qualified | Not qualified |
| Hardware Encryption Accelerator | No (5200 silicon) | No | Yes | Yes | Yes | Yes |
| BestComm DMA Channels | 16 (Base 5200) | 16 | 32 | 32 | 32 | 32 |
| Lifecycle Status (2026) | NRND (Not Recommended for New Designs) | End of Life (NXP discontinued) | NRND | NRND | NRND | NRND |
Key Differentiators
- Lead-free commercial-grade silicon vs. the older C (leaded) variant (vs MPC5200CVR400)
- AEC-Q100 automotive qualification plus B-silicon DMA upgrades (vs MPC5200CVR400B)
- Same 272-BGA footprint across the family (vs MPC5200VR400B)
Design Notes
The MPC5200VR400 typically dissipates around 1 W, which is low but not negligible for a fanless plastic BGA. Use a 4-layer PCB with an unbroken inner ground plane directly beneath the 272-BGA die to spread heat. Estimate: with theta_JA around 20 C/W for a 4-layer board, 1 W dissipation yields approximately 20 C junction-to-ambient rise; ensure the enclosure keeps ambient below 70 C. Recheck datasheet theta_JA when finalizing mechanical design.
Decouple every VDD_CORE and VDD_IO ball pair with a 100 nF X7R ceramic placed within 2 mm of the balls, supplemented by a 10 uF bulk cap per power rail. Follow the NXP MPC5200 hardware-design checklist for the DDR memory interface - it requires matched trace lengths and a 50 ohm controlled impedance on the address/command group. The 27 x 27 mm BGA uses 1.27 mm pitch; verify your PCB fabricator can handle 0.4 mm laser-drilled microvias if escape routing requires them.
Keep the dual Ethernet MAC differential pairs (TX/RX) matched within 100 mils on the top or first inner layer; route them over a continuous ground plane and do not split the ground underneath. The BestComm DMA descriptor memory region should be mapped to cache-locked memory for deterministic throughput per the NXP datasheet. PCI 2.2 clock traces must be series-terminated to 33 ohm to meet PCI signal-integrity requirements.
Because the MPC5200 line is NRND, do not start a new production design with it - source from authorized distributors like Rochester Electronics only for legacy boards where avoiding re-spin costs outweighs lifecycle risk. Verify your firmware/BSP against the silicon revision (5200 vs 5200B); the B revision moves several peripheral interrupt vector assignments. Bootstrapping requires correct configuration strap state on the local bus pins at reset - mis-set straps prevent JTAG or external bus boot.
Compliance Information
MPC5200VR400 is the lead-free commercial-temperature version (MPN suffix 'V' indicates lead-free). AEC-Q100 qualification is NOT available on this MPN - choose MPC5200CVR400B or SPC5200CBV400B for automotive.
