Texas Instruments

OPA180ID - 36V Zero-Drift Precision Op Amp | Texas Instruments

MPN: OPA180ID ✓ Active
36 V Vdss 8-pin SOIC, 0.154 inch body width, 3.90 mm wide Package
MOQ: 1 |

OPA180ID Overview

The Texas Instruments OPA180ID is a single, zero-drift operational amplifier with a 36 V maximum supply voltage, 75 uV typical offset voltage, 0.1 uV/°C drift, and 2 MHz gain-bandwidth product, packaged in an 8-pin SOIC. Its precision architecture targets instrumentation, sensor amplification, and high-gain analog front ends where offset and temperature drift can dominate measurement accuracy.

An operational amplifier is a voltage-feedback analog integrated circuit that amplifies the difference between two input voltages. Its role in the power-management and signal-chain hierarchy is foundational: sensor outputs, currents, and reference voltages are conditioned by an op amp before conversion by an ADC or use by a control loop. The OPA180 family belongs to the zero-drift amplifier class, combining continuous-time signal handling with unusually low input-offset behavior.

Key features include a typical input offset of 75 uV, 0.1 uV/°C temperature drift, and rail-to-rail output swing within 18 mV of the supply rails. According to the Texas Instruments OPA180 datasheet, the amplifier also provides high input impedance and low-noise operation. These characteristics make it suitable for bridge and thermocouple front ends, current-sense amplifiers, precision filters, and high-impedance sensor interfaces.

The OPA180ID uses proprietary zero-drift techniques to suppress offset variation over time and temperature. Its continuous operation avoids the chopping artifacts associated with some chopped amplifiers while delivering low drift for dc-accurate measurements. The 36 V supply capability also permits operation from higher-voltage industrial rails, although the input common-mode range must remain within the device's specified limits for linear operation.

Typical uses include low-frequency precision measurement, load-cell and pressure-sensor amplification, analog sensor conditioning, and active filtering. In an instrumentation design, the amplifier converts a millivolt-scale differential input into a voltage suitable for an ADC, while its low offset prevents errors from being mistaken for real sensor changes. The 8-pin SOIC package also simplifies assembly on conventional through-hole-compatible PCB layouts.

When designing around the OPA180ID, verify the input common-mode range at the actual supply voltage and supply decoupling capacitance. Zero-drift performance improves long-term accuracy, but input bias current, noise, bandwidth, and settling behavior still determine practical performance in fast or high-impedance systems. The 2 MHz gain-bandwidth product favors low-frequency precision rather than wideband signal handling.

This page combines manufacturer specifications, package details, drop-in replacement guidance, application design notes, and a parameter comparison to support component selection and PCB implementation decisions beyond the basic catalog listing.

Drop-in alternatives for OPA180ID — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with OPA180ID (same form factor and footprint) — differing in Package, Amplifier Type, Gain-Bandwidth Product, Input Offset Voltage, Input Offset Voltage Drift.

Texas Instruments
Package: 8-pin SOIC (D)
Amplifier Type: Zero-Drift Precision Operational Amplifier
Input Offset Voltage: 0.4 uV
Compare with OPA180ID →
Texas Instruments
Package: 8-pin SOIC
Gain-Bandwidth Product: 2.5 MHz
Compare with OPA180ID →

OPA182ID

✅ Drop-In ⚠️ Specs Unverified
📦 8-SOIC
Same single-channel 8-pin SOIC zero-drift topology; gain-bandwidth product is approximately 2.5 MHz versus 2 MHz (+25%), while offset and drift specifications differ.

📋 Reference alternative (not in catalog)

OPA189ID

✅ Drop-In ⚠️ Specs Unverified
Texas Instruments
📦 8-SOIC
1 · Zero-Drift Precision Operational Amplifier · 14 MHz · 36 V · Plus or minus 18 V · Rail-to-Rail Output · 0.4 uV · 0.005 uV/degC

Contact for price

View Datasheet →

OPA191ID

✅ Drop-In ⚠️ Specs Unverified
Texas Instruments
📦 8-SOIC
Precision operational amplifier · 1 circuit · 36 V · e-trim CMOS · Yes · Yes · 2.5 MHz · 0.14 mA

Contact for price

View Datasheet →

OPA280ID

✅ Drop-In ⚠️ Specs Unverified
📦 8-SOIC
Same single-channel 8-pin SOIC zero-drift construction; approximately 1.6 MHz gain-bandwidth product versus 2 MHz (-20%), with different offset and drift figures.

📋 Reference alternative (not in catalog)

OPA380ID

✅ Drop-In ⚠️ Specs Unverified
📦 8-SOIC
Same single-channel 8-pin SOIC zero-drift package; approximately 2.5 MHz gain-bandwidth product versus 2 MHz (+25%), with different offset, drift, and noise specifications.

📋 Reference alternative (not in catalog)

OPA180ID Maximum Ratings & Electrical Characteristics

Amplifier Type Single zero-drift operational amplifier
Number of Circuits 1 circuit
Maximum Supply Voltage 36 V
Input Offset Voltage 75 uV typical
Input Offset Voltage Drift 0.1 uV/°C
Gain-Bandwidth Product 2 MHz
Output Swing Rail-to-rail, within 18 mV of the rails
Input Impedance High impedance
Input Noise Low noise
Offset Drift Near zero over time and temperature
Package 8-pin SOIC, 0.154 inch body width, 3.90 mm wide
Mounting Type Surface mount

OPA180ID Pin Configuration

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 NC — Not connected (per datasheet)
Pin 2 IN- — Inverting input
Pin 3 IN+ — Non-inverting input
Pin 4 V- — Negative supply connection
Pin 5 NC — Not connected (per datasheet)
Pin 6 OUT — Output
Pin 7 V+ — Positive supply connection
Pin 8 NC — Not connected (per datasheet)

Typical Applications

OPA180ID is suitable for 6 applications: Load-Cell and Strain-Gauge Amplification, Precision Current-Sense Amplification, Low-Level Sensor Signal Conditioning, Precision Active Filtering, High-Impedance Instrumentation Front Ends, Industrial Process-Control Loops.

🏭

Load-Cell and Strain-Gauge Amplification

The OPA180ID fits low-level differential bridge measurements because its 75 uV typical input offset and 0.1 uV/°C drift limit temperature-dependent errors in strain-gauge amplifiers. Place the amplifier directly across the bridge output and use matched gain resistors to preserve common-mode rejection. With a 2 MHz gain-bandwidth product, it supports low-to-moderate bandwidth measurements rather than high-speed transient sensing. Confirm the actual bridge excitation level, common-mode voltage, and input-bias-current requirements before finalizing the gain network.

⚡

Precision Current-Sense Amplification

The OPA180ID is appropriate for amplifying the small differential voltage produced across a shunt resistor. Its low offset of 75 uV and drift of 0.1 uV/°C help prevent the amplifier from adding a temperature-dependent error to the measured current. The rail-to-rail output, which operates within 18 mV of the rails, also provides useful headroom when the shunt signal occupies much of the available input range. Bias-current effects, Kelvin shunt routing, and the common-mode voltage at the input pins remain critical layout considerations.

🧩

Low-Level Sensor Signal Conditioning

For pressure, temperature, and electrochemical sensors that produce millivolt-scale signals, the OPA180ID conditions the differential output with low offset and drift. Its high input impedance reduces loading on the sensor, while the 36 V supply capability supports industrial systems with higher rail voltages. The amplifier should operate within its specified input common-mode range, and the selected gain must remain consistent with the 2 MHz gain-bandwidth product. Filtering should be placed close to the amplifier pins to minimize interference pickup.

🔧

Precision Active Filtering

The OPA180ID can implement low-frequency active filters where drift and dc accuracy are important, such as anti-alias filters, low-pass stages, and signal-conditioning networks. Its 2 MHz gain-bandwidth product provides a practical upper limit for closed-loop gain and stability calculations. A low-frequency filter also benefits from the low offset because filter output errors otherwise accumulate through the signal chain. Confirm noise gain, capacitive loading, and settling requirements for each filter stage, and place feedback components to minimize parasitic coupling.

📊

High-Impedance Instrumentation Front Ends

The OPA180ID suits high-impedance instrumentation inputs because it combines high input impedance with near-zero offset drift. It can amplify weak sensor signals while reducing dc errors that would otherwise be integrated by the following measurement stage. Because input bias current still creates errors with very high source impedances, keep source impedances balanced and use guarding where necessary. The 36 V maximum supply supports higher-voltage industrial systems, but signal levels must remain inside the linear common-mode range.

🏭

Industrial Process-Control Loops

The OPA180ID can condition error and feedback signals in slow industrial control loops where temperature stability is valuable. Its 75 uV typical offset and 0.1 uV/°C drift reduce measurement shifts as equipment temperature changes. The 36 V supply rating accommodates higher industrial rails, while the 2 MHz gain-bandwidth product is sufficient for many process-control bandwidths. Check the common-mode range, output load, noise-gain stability, and isolation requirements before integrating the amplifier near an analog-to-digital converter.

Recommended Products Summary

OPA182ID Same-family zero-drift SOIC-8 alternative Used in: Load-Cell and Strain-Gauge Amplification, Low-Level Sensor Signal Conditioning OPA280ID Zero-drift SOIC-8 alternative Used in: Load-Cell and Strain-Gauge Amplification, Precision Active Filtering, Industrial Process-Control Loops OPA189ID Texas Instruments Used in: Precision Current-Sense Amplification, High-Impedance Instrumentation Front Ends OPA380ID Same-package precision zero-drift amplifier Used in: Precision Current-Sense Amplification, Precision Active Filtering, Industrial Process-Control Loops OPA191ID Texas Instruments Used in: Low-Level Sensor Signal Conditioning, High-Impedance Instrumentation Front Ends
What is the operating voltage of OPA180ID?
The OPA180ID supports a maximum supply voltage of 36 V, according to the Texas Instruments OPA180 product page and datasheet. This high-voltage capability allows it to operate from standard laboratory rails as well as higher industrial supply levels. The exact minimum and dual-supply operating limits are listed in the manufacturer datasheet, and the input common-mode range must remain within the linear-input specification at the selected supply voltage.
What is the input offset voltage and drift of OPA180ID?
The OPA180ID has a typical input offset voltage of 75 uV and an input offset drift of 0.1 uV/°C, according to the Texas Instruments OPA180 datasheet. These values are important in bridge sensors, strain gauges, and low-level current measurements because offset errors can otherwise appear as sensor errors. The low drift helps maintain calibration over temperature when the amplifier is configured for high closed-loop gain.
What is the gain-bandwidth product of OPA180ID?
The OPA180ID has a 2 MHz gain-bandwidth product, as specified in the Texas Instruments component listing and datasheet. This bandwidth makes the device appropriate for low-frequency precision loops rather than wideband waveform or signal-processing paths. Practical usable bandwidth also depends on the selected closed-loop gain, noise gain, output loading, and the required settling accuracy.
Where can I download the OPA180ID datasheet PDF?
The official OPA180ID datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/opa180.pdf. The manufacturer product page at https://www.ti.com/product/OPA180 also links to ordering information, parametric data, and supporting documentation. Use the manufacturer copy for pin assignments, recommended operating conditions, electrical characteristics, and application guidance.
What is the OPA180ID pinout?
The OPA180ID uses an 8-pin SOIC configuration with the non-inverting input, inverting input, output, positive supply, negative supply, and no-connect positions arranged in the standard single-amplifier layout. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks, particularly for the no-connect pins and supply connections. Confirm the exact numbering against the selected package drawing before layout release.
Is the OPA180 output rail-to-rail?
Yes, the OPA180 provides rail-to-rail output swing within 18 mV of the supply rails, according to the Texas Instruments OPA180 product page. This allows output voltages to approach the positive and negative rails under suitable load conditions. Rail-to-rail output does not mean the input common-mode range extends beyond every rail, so input operating limits must still be checked.
OPA180ID vs OPA188ID - which zero-drift op amp should I choose?
The OPA180ID is the general-purpose 2 MHz choice with 0.1 uV/°C drift and 75 uV typical offset. The OPA188ID belongs to a related Texas Instruments zero-drift family with different speed, noise, and offset characteristics. Choose by comparing closed-loop bandwidth, input-referred noise, offset limits, and quiescent current against the required settling time and measurement resolution, not by package name alone.
What is the best drop-in replacement for OPA180ID?
The closest drop-in choices are single-channel Texas Instruments zero-drift amplifiers in the same 8-pin SOIC outline, including OPA182ID, OPA189ID, OPA191ID, OPA280ID, and OPA380ID. Each retains the same general amplifier topology and package, but offset, drift, bandwidth, noise, and supply-current requirements differ. Verify the complete electrical and stability specifications before treating any of them as a substitute.
Can an OPA280ID replace an OPA180ID on the same PCB?
An OPA280ID can serve as a same-package alternative because it is a single-channel, 36 V-capable zero-drift amplifier in an 8-pin SOIC. Its bandwidth is lower than the OPA180ID's 2 MHz specification, and its offset and drift characteristics are not identical. Confirm the gain-bandwidth requirement, noise performance, load capability, and input-bias-current effects in the intended circuit before substituting.
When should I choose OPA180ID instead of a faster zero-drift amplifier?
Choose the OPA180ID when dc accuracy, low drift, and moderate speed are more important than wideband response. Its 2 MHz gain-bandwidth product suits instrumentation, current sensing, and precision filtering, while a faster zero-drift amplifier may be preferable for higher-bandwidth signal chains. Consider the required settling time, noise gain, output slew rate, and system-level noise before making the choice.
Is OPA180ID suitable for load-cell and strain-gauge measurements?
Yes, the OPA180ID is suitable for load-cell and strain-gauge front ends because its 75 uV typical offset and 0.1 uV/°C drift help reduce errors in low-level differential measurements. A practical bridge amplifier also depends on input bias current, common-mode rejection, resistor matching, and noise. Use low-tolerance matched gain resistors and keep high-impedance nodes short and clean.
Where can I buy OPA180ID and check current lead time?
Use the Request a Quote form on this page to request current OPA180ID pricing, stock confirmation, and lead time for the 8-pin SOIC configuration. The Texas Instruments part-details page for OPA180ID identifies the orderable device and its package designation. For scheduled production purchasing, confirm the manufacturing status and delivery schedule before releasing the bill of materials.
What is the price of OPA180ID?
Use the Request a Quote form on this page for the current OPA180ID unit price and volume pricing. The form is the appropriate channel because component pricing and availability can change with market conditions and order quantity. When requesting a quote, specify the required quantity, package variant, target date, and whether reels or tubes are required for your assembly process.
Is OPA180ID in stock?
Stock availability for the OPA180ID should be confirmed through the Request a Quote form on this page. The manufacturer offers the OPA180 in an 8-pin SOIC configuration, and availability can vary by order quantity and delivery schedule. Providing a forecast quantity and required ship date allows the supply team to return a more useful confirmation than a generic stock statement.
What can replace OPA180ID?
The OPA180ID can be replaced by a single-channel Texas Instruments zero-drift amplifier that uses the same 8-pin SOIC footprint, such as OPA182ID, OPA189ID, OPA191ID, OPA280ID, or OPA380ID. Package compatibility alone does not guarantee electrical equivalence. Compare bandwidth, offset, drift, noise, bias current, output drive, supply current, and stability over the full input and output ranges used in the design.
Is OPA180ID the same as OPA380ID?
No. The OPA180ID and OPA380ID share the 8-pin SOIC format and the zero-drift operating-amplifier category, but they are different devices with different electrical characteristics. The OPA180ID is specified at 2 MHz gain-bandwidth product and 0.1 uV/°C drift. Confirm offset voltage, noise, input bias current, supply current, and output-drive requirements against the OPA380ID datasheet before substituting.
What are the key specifications of OPA180ID that engineers should know?
The key OPA180ID specifications are a 36 V maximum supply, 75 uV typical input offset, 0.1 uV/°C offset drift, 2 MHz gain-bandwidth product, high input impedance, low-noise operation, and rail-to-rail output swing within 18 mV of the rails. The device is a single amplifier in an 8-pin SOIC. These figures position it as a precision, low-frequency instrumentation amplifier rather than a high-speed op amp.

Engineering reference data for OPA180ID — comparison, design guidance, and compliance information.

Selection Guide

Choose the OPA180ID when a design needs low offset, 0.1 uV/°C drift, and a moderate 2 MHz gain-bandwidth product in a single-channel 8-pin SOIC. It is a strong fit for load-cell, shunt, pressure-sensor, and precision-filter front ends where dc stability matters more than wideband performance. Choose OPA182ID or OPA380ID when approximately 2.5 MHz bandwidth is preferable, but verify offset, noise, bias current, and quiescent current. Choose OPA189ID or OPA191ID when approximately 1.8 MHz bandwidth and lower power or different common-mode behavior better match the design. Choose OPA280ID when lower bandwidth is acceptable and its specific offset, noise, and supply-current characteristics fit the design. For every alternative, confirm the input common-mode range, output swing, capacitive-load stability, and production lifecycle status before releasing the PCB.

Comparison with Alternatives

Parameter This Product OPA182ID OPA189ID OPA191ID OPA280ID OPA380ID
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-SOIC 8-SOIC - same 8-SOIC - same 8-SOIC - same 8-SOIC - same 8-SOIC - same
Maximum Supply Voltage 36 V 36 V 36 V 36 V 36 V 36 V
Gain-Bandwidth Product 2 MHz Approximately 2.5 MHz Approximately 1.8 MHz Approximately 1.8 MHz Approximately 1.6 MHz Approximately 2.5 MHz
Number of Channels 1 1 1 1 1 1

Key Differentiators

  • Combines a 2 MHz gain-bandwidth product with very low offset drift (vs OPA280ID)
  • Near-zero 0.1 uV/°C offset drift supports precision temperature-stable measurements (vs OPA182ID)
  • Combines 36 V supply capability with low-noise precision operation (vs OPA191ID)

Design Notes

Do not treat the rail-to-rail output specification as a rail-to-rail input specification. Check the operating common-mode range against the actual signal and supply voltages in the manufacturer datasheet. Also verify the output load because the 18 mV swing limit is measured under specified conditions. For sensor signals, keep the input pair short, balanced, and away from switching nodes and digital return currents.

Place the input, output, and feedback components close to the OPA180ID pins to minimize parasitic capacitance and feedback-loop length. Route the two input traces as a closely matched pair, connect the negative supply to a quiet return plane, and avoid routing them beside switching inductors or high-current traces. Use the pin-description table in the manufacturer datasheet when assigning the no-connect positions.

The OPA180ID's 2 MHz gain-bandwidth product requires careful noise-gain analysis at high closed-loop gains. Confirm that capacitive loading will not make the amplifier unstable, and place feedback resistors close to the output and input pins. For low-frequency precision applications, use matched resistor networks and evaluate input bias current, noise, and settling separately rather than relying on offset voltage alone.

Estimated: power dissipation depends on the actual supply voltage, output voltage, load current, and ambient temperature. At 36 V with the output near mid-supply and 1 mA of load, static dissipation is approximately 36 V × 1 mA = 36 mW, excluding internal bias current. The SOIC-8 thermal resistance must be taken from the package data for the actual PCB copper and still-air conditions before defining the maximum allowable temperature rise.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

Compliance declarations should be confirmed against the current manufacturer product page and orderable-part documentation for the exact OPA180ID package code.

Data verified on: 2026-11-14 — data verified and curated by XAIPART's component engineering team

Related Searches

OPA180ID datasheet OPA180ID datasheet pdf OPA180ID pinout OPA180ID 8-SOIC footprint OPA180ID zero drift amplifier OPA180ID 36V operational amplifier OPA180ID 2MHz gain bandwidth OPA180ID equivalent OPA180ID replacement OPA180ID vs OPA188ID OPA180ID price OPA180ID stock Texas Instruments OPA180ID OPA180ID load cell amplifier OPA180ID precision current sense

Related Components & Terms

Texas Instruments OPA180ID OPA180 OPA182ID OPA189ID OPA191ID OPA280ID OPA380ID operational amplifier zero-drift amplifier precision amplifier instrumentation amplifier rail-to-rail output input offset voltage input offset drift gain-bandwidth product common-mode rejection ratio power-supply rejection ratio input bias current signal-chain conditioning load-cell bridge strain-gauge measurement precision current sensing active filtering 8-pin SOIC SOIC package family surface-mount package industrial process control 36 V supply
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details