Texas Instruments

OPA705UA - 12V 1MHz Rail-to-Rail CMOS Op Amp | Texas Instruments

MPN: OPA705UA ✓ Active
12 V Vdss 8-SOIC, 0.154 in (3.90 mm) wide Package
MOQ: 1 |

OPA705UA Overview

Texas Instruments OPA705UA is a single-circuit, low-cost CMOS operational amplifier with rail-to-rail input and output capability, a 1 MHz gain-bandwidth product, and a maximum 12 V supply rating. The device is offered in an 8-pin SOIC surface-mount package and can operate from 4 V to 12 V on a single supply or from ±2 V to ±6 V on a dual supply. Its rail-to-rail I/O architecture supports input and output signals that approach the supply rails, making it useful for compact signal-conditioning and general-purpose analog systems.

An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs while presenting high input impedance and low output impedance to the surrounding circuit. Operational amplifiers sit within the amplifier-IC hierarchy and are widely used as closed-loop gain stages, voltage followers, buffers, comparators, filters, and active front ends for sensors and data-conversion systems. The OPA705 combines that general-purpose function with low-cost CMOS construction and a compact SOIC footprint.

The principal features of the OPA705UA are its 1 MHz gain-bandwidth product, rail-to-rail input and output operation, single-supply operation from 4 V to 12 V, dual-supply operation from ±2 V to ±6 V, and a single amplifier channel per package. Rail-to-rail input behavior is valuable when sensing signals near either supply rail, while rail-to-rail output capability provides more usable output range than a conventional amplifier limited to the rails.

OPA705UA is designed for low-cost, general-purpose applications rather than precision instrumentation. The manufacturer classifies the device as a single, 12 V, 1 MHz operational amplifier. Its 8-pin SOIC package provides a familiar pin arrangement and a practical upgrade path from other single-channel SOIC operational amplifiers when the circuit requires compatible supply voltage, input/output range, and signal bandwidth. Input common-mode and output swing limits must still be checked against the actual supply voltage and load.

Typical uses include sensor-signal conditioning, current measurement, low-frequency active filters, audio and communication interfaces, industrial control loops, and low-voltage portable equipment. A unity-gain voltage follower can buffer a high-impedance sensor, while a non-inverting amplifier stage can provide gain without placing substantial current on the sensor. The 1 MHz bandwidth is also appropriate for control and instrumentation paths that do not require the higher bandwidth of a high-speed amplifier.

When using OPA705UA, verify input common-mode range, output swing, stability with capacitive loads, and noise performance at the signal bandwidth of interest. Decoupling capacitors should be placed close to the supply pins, and sensitive analog inputs should be routed away from switching nodes. Because this is a low-cost CMOS amplifier, applications demanding very low offset voltage, bias current, distortion, or noise should compare it with precision families before finalizing the design.

This page combines the exact ordering information for OPA705UA with package and pinout guidance, same-footprint replacement options, parameter comparisons, and practical design notes. It is intended to help engineers determine whether the 12 V, 1 MHz, rail-to-rail CMOS amplifier fits the electrical and mechanical requirements of a new analog circuit without overlooking supply-range or stability constraints.

Drop-in alternatives for OPA705UA — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with OPA705UA (same form factor and footprint) — differing in Dual-Supply Operating Range, Package.

Texas Instruments
Dual-Supply Operating Range: ±6 V
Package: 8-pin SOIC
Compare with OPA705UA →

OPA703UA

✅ Drop-In
Texas Instruments
📦 8-SOIC
Single operational amplifier · CMOS · 12 V · ±6 V · 1 MHz · 160 µA · 160 µV · 90 dB

Contact for price

View Datasheet →

OPA704UA

✅ Drop-In ⚠️ Specs Unverified
Texas Instruments
📦 8-SOIC
Single operational amplifier · 1 circuit · 12 V · 3 MHz · Rail-to-rail · Rail-to-rail · 8-pin SOIC · Surface mount

Contact for price

View Datasheet →

OPA706UA

✅ Drop-In ⚠️ Specs Unverified
📦 8-SOIC
The 8-SOIC pin-compatible format and 4 V to 12 V supply class are maintained, with a different offset-voltage and precision profile.

📋 Reference alternative (not in catalog)

OPA707UA

✅ Drop-In ⚠️ Specs Unverified
📦 8-SOIC
The 4 V to 12 V supply class is unchanged while the device provides a different precision and DC-error emphasis from OPA705UA.

📋 Reference alternative (not in catalog)

TLV9101ID

✅ Drop-In
📦 8-SOIC
Texas Instruments identifies a drop-in replacement with a 16 V, 1.1 MHz rating versus the OPA705UA's 12 V, 1 MHz rating, providing 4 V more maximum supply rating and 0.1 MHz more gain-bandwidth product.

📋 Reference alternative (not in catalog)

OPA705UA Maximum Ratings & Electrical Characteristics

Number of Amplifier Channels 1 channel
Maximum Total Supply Voltage 12 V
Single-Supply Operating Range 4 V to 12 V
Dual-Supply Operating Range ±2 V to ±6 V
Gain-Bandwidth Product 1 MHz
Input Type Rail-to-Rail I/O
Output Type Rail-to-Rail I/O
Process Technology CMOS
Application Classification Standard general-purpose amplifier
Package 8-SOIC, 0.154 in (3.90 mm) wide
Mounting Type Surface mount

OPA705UA Pin Configuration

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 NC — Not connected
Pin 2 IN- — Inverting input
Pin 3 IN+ — Non-inverting input
Pin 4 V- — Negative supply connection
Pin 5 NC — Not connected
Pin 6 OUT — Amplifier output
Pin 7 V+ — Positive supply connection
Pin 8 NC — Not connected

Typical Applications

OPA705UA is suitable for 6 applications: Low-Voltage Sensor Signal Conditioning, Current Measurement Front End, Low-Frequency Active Filtering, Industrial Control and Instrumentation, Audio and Communication Interface Buffering, Portable and Battery-Powered Equipment.

🧩

Low-Voltage Sensor Signal Conditioning

OPA705UA is appropriate for buffering and scaling low-voltage sensor outputs where the amplifier must operate from a compact 4 V to 12 V single supply. Its rail-to-rail input and output architecture provides useful signal range near the supply rails, while the 1 MHz gain-bandwidth product is sufficient for many temperature, pressure, light, and industrial-control sensors. Place the device in a non-inverting or differential stage and confirm that the sensor signal remains inside the amplifier's input common-mode range. Output swing, offset, noise, and capacitive loading should be checked against the required measurement accuracy and sensor cable length.

⚡

Current Measurement Front End

OPA705UA can amplify the small voltage produced by a shunt resistor in low-voltage current-measurement circuits. Its 1 MHz gain-bandwidth product supports bandwidths well beyond ordinary slow current monitoring, and rail-to-rail I/O operation can improve utilization of a restricted supply range. Use the amplifier in a differential or subtractive configuration when the shunt voltage is small relative to offset and noise. Verify shunt heating, amplifier offset, input bias current, output swing, and whether the selected gain and compensation provide stable operation across the expected current range.

🌐

Low-Frequency Active Filtering

OPA705UA is suitable for first-order and moderate-order active filters built around 4 V to 12 V single-supply operation. Its 1 MHz gain-bandwidth product leaves substantial bandwidth margin over filters intended for audio, control, or low-frequency sensor signals, reducing the risk that finite closed-loop bandwidth will distort the intended response. The rail-to-rail input and output characteristics can support filters whose signal range approaches the supply rails. Component tolerances, amplifier noise, input bias current, and capacitive stability should be considered when setting resistor and capacitor values.

🏭

Industrial Control and Instrumentation

OPA705UA can serve as a general-purpose error amplifier in compact industrial control and instrumentation boards operating from a 4 V to 12 V rail. Its single-channel CMOS design fits analog monitoring, actuator-control, and signal-conditioning blocks where a higher-bandwidth amplifier is unnecessary. The 1 MHz bandwidth supports many control loops and low-frequency measurement channels, while the compact 8-SOIC package simplifies assembly. Designers should still review offset, bias current, noise, common-mode range, and output-current capability, particularly when the amplifier drives a sensor, relay driver, or downstream converter.

🎧

Audio and Communication Interface Buffering

OPA705UA can buffer low-level audio or communication signals in compact mixed-signal designs that use a 4 V to 12 V supply. The 1 MHz gain-bandwidth product covers a substantial portion of the audio range and many low-speed interface signals, while rail-to-rail I/O behavior can improve utilization of the available signal range. The device is best suited to low-cost, noncritical channels rather than high-fidelity audio paths with demanding noise and distortion limits. Check output swing into the actual load, input noise, offset, channel separation where relevant, and stability when driving capacitive inputs or long interconnects.

📱

Portable and Battery-Powered Equipment

OPA705UA is suitable for low-voltage portable equipment that operates within its specified 4 V to 12 V supply range and does not require a very-low-power zero-drift amplifier. A single amplifier in an 8-SOIC package can provide gain or buffering for sensors, interface logic, and control signals. Battery operation makes supply current an important selection criterion, so verify the operating current and current required by the surrounding analog block. Check the amplifier's behavior during battery transitions, confirm common-mode limits at the minimum battery voltage, and assess shutdown requirements if the device is expected to remain connected to a depleted battery.

Recommended Products Summary

OPA703UA Texas Instruments Used in: Low-Voltage Sensor Signal Conditioning, Industrial Control and Instrumentation TLV9101ID General-purpose single-channel SOIC alternative Used in: Low-Voltage Sensor Signal Conditioning, Current Measurement Front End, Audio and Communication Interface Buffering, Portable and Battery-Powered Equipment OPA704UA Texas Instruments Used in: Current Measurement Front End, Industrial Control and Instrumentation OPA706UA Same-package single-channel amplifier family option Used in: Low-Frequency Active Filtering, Audio and Communication Interface Buffering OPA707UA Precision-oriented active-filter candidate Used in: Low-Frequency Active Filtering, Portable and Battery-Powered Equipment
What is the OPA705UA?
The OPA705UA is a single-channel, low-cost CMOS operational amplifier with rail-to-rail input and output capability, a 1 MHz gain-bandwidth product, and a maximum 12 V supply rating. Texas Instruments specifies it in an 8-pin SOIC package, with single-supply operation from 4 V to 12 V and dual-supply operation from ±2 V to ±6 V. It is intended for general-purpose signal conditioning rather than precision instrumentation.
Where can I download the OPA705UA datasheet?
The OPA705UA datasheet is available through the Texas Instruments OPA705 product page at https://www.ti.com/product/OPA705. That page provides the manufacturer datasheet, ordering information, package details, and product parameters. Use the 8-SOIC pin configuration associated with the UA ordering suffix when assigning PCB nets, and consult the pin-description table in the manufacturer datasheet before finalizing layout.
What is the OPA705UA pinout?
The OPA705UA uses an 8-pin SOIC configuration with the amplifier's principal connections assigned to pins 2, 3, 4, 6, and 7. The OPA705 family pin-description table identifies the inverting input, non-inverting input, negative supply, output, and positive supply, while three positions are not connected. The complete OPA705UA diagram is the 8-SOIC outline with standard counter-clockwise numbering.
What is the operating voltage range of OPA705UA?
OPA705UA operates from 4 V to 12 V when powered by a single supply and from ±2 V to ±6 V when powered by a dual supply. According to the Texas Instruments OPA705 product information, its maximum total supply rating is 12 V. These limits must be respected under all startup, shutdown, transient, and load conditions rather than only at the nominal operating point.
What are the key specifications of OPA705UA?
The OPA705UA is a 1-channel CMOS operational amplifier with a 1 MHz gain-bandwidth product, rail-to-rail I/O operation, and a maximum 12 V supply voltage. Its specified operating ranges are 4 V to 12 V for single-supply use and ±2 V to ±6 V for dual-supply use. The amplifier is supplied in an 8-SOIC package and is classified by Texas Instruments as a general-purpose device.
Is OPA705UA suitable for rail-to-rail signal conditioning?
Yes, OPA705UA is suitable for general-purpose rail-to-rail signal conditioning because the manufacturer identifies both its input and output as rail-to-rail I/O. It can be used for low-voltage sensor buffers, current-to-voltage amplifiers, and low-frequency active filters. The actual input common-mode range and output swing still depend on the supply voltage and load, so both should be checked in the design.
OPA705UA vs OPA703UA — which is better for a general-purpose amplifier?
OPA705UA is the better choice for a low-cost general-purpose design, while OPA703UA is positioned as a precision voltage-controlled amplifier for industrial and medical uses. Both are single-channel CMOS amplifiers available in SOP-8 packages, and both use a 4 V to 12 V total-supply range. Choose OPA705UA for cost-focused signal conditioning and OPA703UA when precision characteristics justify the additional scrutiny.
OPA705UA vs TLV9101ID — which amplifier should I choose?
OPA705UA and TLV9101ID are both single-channel, general-purpose amplifier options, but the Texas Instruments product information identifies the TLV9101 as a drop-in replacement with upgraded functionality. OPA705UA is specified at 1 MHz and a 12 V maximum supply, whereas the TLV9101 family is identified as a 16 V, 1.1 MHz, low-power amplifier. The comparison table marks detailed differences that were not established.
When should I choose OPA705UA over OPA703UA?
Choose OPA705UA when cost, compactness, rail-to-rail I/O operation, and general-purpose signal conditioning are the main priorities. The OPA705UA operates from 4 V to 12 V on a single supply and provides a 1 MHz gain-bandwidth product. Choose OPA703UA instead when its precision-oriented characteristics are required for industrial or medical measurement and low-cost general-purpose performance is not the principal objective.
Is OPA705UA suitable for a 5 V sensor amplifier?
OPA705UA is suitable for many 5 V sensor-amplifier circuits because its specified single-supply range begins at 4 V and includes 5 V. Rail-to-rail input and output behavior can improve utilization of the available supply range, and the 1 MHz bandwidth covers low- to moderate-bandwidth sensing signals. Confirm the sensor output range, minimum signal amplitude, input offset requirements, noise, and stability before selecting the gain.
What can replace OPA705UA?
OPA705UA can be replaced only after confirming package, pinout, supply range, input/output range, bandwidth, and stability. Texas Instruments identifies TLV9101 as a drop-in replacement with upgraded functionality, and OPA703UA is another SOP-8 single-channel CMOS option. OPA704UA, OPA706UA, and OPA707UA are additional same-brand family candidates, but their precision and dynamic specifications must be checked before production substitution.
What is the best drop-in replacement for OPA705UA?
TLV9101ID is the strongest directly identified drop-in option because Texas Instruments describes the TLV9101 as a drop-in replacement with upgraded functionality. It is a single-channel low-power operational amplifier in the 16 V, 1.1 MHz class and can be ordered in an 8-pin SOIC configuration. Before substitution, verify the exact ordering suffix, pinout, common-mode range, output swing, and capacitive-load behavior.
Is OPA705UA the same as OPA703UA?
No. OPA705UA and OPA703UA share the single-channel CMOS architecture, SOP-8 packaging, and 4 V to 12 V total-supply classification, but they serve different design priorities. OPA705UA is a low-cost general-purpose amplifier, whereas OPA703UA is described as a precision voltage-controlled amplifier for industrial and medical applications. Their offset, bias, noise, and accuracy characteristics should not be treated as interchangeable.
Where can I buy OPA705UA and request current lead time?
Use the Request a Quote form on this page to ask for OPA705UA availability, current lead time, and order handling. The exact UA ordering suffix identifies the 8-SOIC configuration. Commercial availability and lifecycle status should be confirmed for the requested quantity, because stock levels and lead times can change independently of the device's active designation.
How should OPA705UA be decoupled and laid out?
Place the supply-bypass capacitors close to the OPA705UA positive and negative supply pins, and route sensitive input and feedback traces away from switching nodes and high-current paths. The 8-SOIC footprint requires short feedback loops and a stable ground reference. Before finalizing the layout, check the manufacturer datasheet for input common-mode limits, output swing, capacitive-load stability, and any application-specific layout guidance.

Engineering reference data for OPA705UA — comparison, design guidance, and compliance information.

Selection Guide

Choose OPA705UA for a compact, low-cost, general-purpose analog stage using a 4 V to 12 V single supply or ±2 V to ±6 V dual supply. It is particularly appropriate when rail-to-rail I/O behavior and a 1 MHz gain-bandwidth product are useful, but very low offset, bias current, or noise is not required. Select OPA703UA when precision-oriented industrial or medical performance matters more than general-purpose positioning. Consider TLV9101ID when its 16 V maximum supply rating, 1.1 MHz bandwidth, low-power positioning, or manufacturer-identified drop-in relationship provides a clearer benefit. OPA704UA, OPA706UA, and OPA707UA offer alternative precision emphases in the same general family, but each should be selected according to its complete DC and noise specifications. In every case, verify the exact SOIC pinout, common-mode range, output swing, supply current, noise, and capacitive-load stability before releasing a production design.

Comparison with Alternatives

Parameter This Product OPA703UA OPA704UA OPA706UA OPA707UA TLV9101ID
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-SOIC 8-SOIC - same package 8-SOIC - same package 8-SOIC - same package 8-SOIC - same package 8-SOIC - same package
Amplifier Channels 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit
Maximum Supply Voltage 12 V 12 V 12 V 12 V 12 V 16 V

Key Differentiators

  • Low-cost general-purpose rail-to-rail amplifier (vs OPA703UA)
  • Directly identified higher-voltage replacement path (vs TLV9101ID)
  • Single-channel SOIC implementation with rail-to-rail I/O (vs OPA707UA)

Design Notes

Place the supply-bypass capacitors immediately adjacent to the OPA705UA V+ and V- pins, and keep the input, feedback, and output routes compact. The 8-SOIC footprint provides little space, so excessive loop area can increase susceptibility to capacitive feedback. Keep high-current return paths away from the inverting-input node and connect analog ground using a deliberate return strategy rather than allowing high-current ground paths to share a narrow trace with the amplifier.

Do not assume that a rail-to-rail designation makes every input and output condition valid. Check the OPA705UA common-mode range at the lowest operating supply voltage, especially for battery-powered systems, and verify output swing at the required load current. Also account for the difference between single-supply and dual-supply operation: a 12 V single supply is not interchangeable with +12 V and -12 V rails because the total supply span would be 24 V.

The 1 MHz gain-bandwidth product makes OPA705UA suitable for low- and moderate-frequency signal paths, but closed-loop bandwidth does not remove the need for stable compensation. Use the manufacturer's recommended configuration for the intended closed-loop gain and evaluate the complete circuit with realistic sensor capacitance, cable capacitance, and output loading. If the source can present significant capacitance, include an isolation resistor or another documented compensation method and verify stability with oscilloscope measurements.

Operating from 4 V to 12 V places the OPA705UA in a low-voltage analog environment where the bypass network is critical. Use short, low-inductance connections from the supply pins to local capacitors and provide adequate return paths for transient current. When the amplifier follows a switching converter, place the regulator and amplifier on the appropriate power plane partition, keep the switching loop compact, and confirm that residual supply ripple does not consume the signal headroom required by the application.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was established for the exact OPA705UA ordering suffix. The OPA705UA is a general-purpose commercial amplifier rather than an AEC-Q100 automotive-qualified option.

Data verified on: 2026-11-14 — data verified and curated by XAIPART's component engineering team

Related Searches

OPA705UA datasheet OPA705UA datasheet pdf OPA705UA pinout OPA705UA equivalent OPA705UA replacement OPA705UA cross reference OPA705UA price OPA705UA stock Texas Instruments OPA705UA OPA705UA 8-SOIC pinout OPA705UA vs TLV9101ID OPA705UA vs OPA703UA OPA705UA 1MHz rail-to-rail OPA705UA sensor signal conditioning

Related Components & Terms

Texas Instruments OPA705UA OPA705 OPA703UA OPA704UA OPA706UA OPA707UA TLV9101ID TLV9101 Operational Amplifier Amplifier IC CMOS Rail-to-Rail Input Rail-to-Rail Output Gain-Bandwidth Product Single-Supply Operation Dual-Supply Operation 8-SOIC SOIC Surface Mount Signal Conditioning Active Filter Current Measurement Sensor Front End Input Common-Mode Range
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details