Microchip Technology

PIC16F721-E/SO - 16MHz 8-Bit MCU with ADC | Microchip

MPN: PIC16F721-E/SO ✓ Active
2.5 V, 3.3 V, or 5 V Vdss 20-pin SOIC, 0.295 inch body width Package 16 MHz Speed 7 KB flash (4K x 14) Memory
MOQ: 1 |

PIC16F721-E/SO Overview

The Microchip Technology PIC16F721-E/SO is an 8-bit PIC16 microcontroller with a 16 MHz internal oscillator, 7 KB of flash program memory, 256 bytes of SRAM, and an 18-I/O capability in a 20-pin SOIC package. It also provides a 12-channel, 8-bit ADC for analog measurement and control tasks.

A PIC16 microcontroller is a compact embedded-control IC that combines a processor core, program memory, data memory, peripherals, and general-purpose input/output pins on one package. The PIC16 architecture belongs to the broader 8-bit microcontroller hierarchy and is commonly used for cost-sensitive industrial control, instrumentation, appliance control, and simple automation where deterministic peripheral operation and in-circuit programming are valuable.

Key device features include a mid-range core with a 35-instruction set, 8 stack levels, self-read/write flash program memory, and 128 bytes of non-volatile data storage. Communications and control peripherals include I2C, SPI, AUSART, a capture/compare/PWM module, two 8-bit timers, one 16-bit timer, a watchdog timer, power-on reset, and brown-out reset. The 12-channel ADC supports analog sensing without requiring a separate converter.

The PIC16F721-E/SO combines a 16 MHz internal oscillator with 7 KB flash and 256 bytes of SRAM, providing a practical balance between code space, data handling, and processing speed. Its 18 I/O pins allow digital control signals, sensor inputs, and actuator outputs to be integrated around a single controller. In-circuit serial programming supports manufacturing, development, and field configuration without removing the device from its circuit.

Typical applications include industrial sensor controllers, digital thermometers, motor and valve control, compact power supplies, building-control modules, data-acquisition front ends, and serial-interface equipment. The 12-bit resolution of the ADC is suitable for many industrial measurements, while I2C, SPI, and AUSART permit connection to sensors, displays, transceivers, and service ports.

When laying out the PCB, reserve the programming interface and stable decoupling close to the appropriate device pins, and route sensitive analog inputs away from switching nodes. Confirm the device's specified operating limits and automotive temperature designation against the manufacturer datasheet before deploying it in safety-critical or vehicle applications.

This product overview combines the PIC16F721-E/SO electrical identity, peripheral capabilities, package details, application guidance, and pin-compatible replacement considerations into an engineering-focused reference for schematic design, firmware planning, PCB layout, and sourcing.

Drop-in alternatives for PIC16F721-E/SO — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with PIC16F721-E/SO (same form factor and footprint) — differing in Package, I/O Pins, Instruction Set, Core Architecture, Internal Oscillator.

Microchip Technology
Package: 20-pin SOIC (SO), 7.50 mm body width
I/O Pins: 18
Core Architecture: PIC16 mid-range, 8-bit RISC
Microchip Technology
Package: 20-pin SOIC (SO)
I/O Pins: 18 (17 I/O + 1 input-only)
Instruction Set: 35 instructions, 14-bit word
Microchip Technology
Package: 20-pin SOIC (SO), 300 mil
I/O Pins: 18 (with 25 mA source/sink)
Instruction Set: 35 instructions, 8-level hardware stack
Microchip Technology
Package: 20-pin SOIC (300 mil)
I/O Pins: 18 (bidirectional, 25 mA source/sink)
Instruction Set: 35 instructions, 8-level stack
Microchip Technology
Package: 28-pin SOIC (SO-28), 0.50 mm pitch, surface mount
I/O Pins: 36
Internal Oscillator: 16 MHz internal
Microchip Technology
Package: 20-pin SOIC (SO), 7.50 mm body width
I/O Pins: 18
Core Architecture: 8-bit PIC Enhanced Mid-Range

PIC16F721-I/SO

✅ Drop-In ⚠️ Specs Unverified
Microchip Technology
📦 SOIC-20
PIC16 mid-range 8-bit RISC · 35 instructions, 8-level hardware stack · 7 KB Flash (4K x 14 words) · 256 bytes · 128 bytes non-volatile data storage · 20 MHz (200 ns instruction cycle) · 16 MHz (factory calibrated) · 1.8 V to 5.5 V

Contact for price

View Datasheet →

PIC16F721T-I/SO

✅ Drop-In
Microchip Technology
📦 SOIC-20
PIC16 Enhanced Mid-Range 8-bit · 35 instructions, 8-level stack · 7 KB (4K x 14 words) · 256 bytes · 128 bytes (non-volatile) · 16 MHz (internal oscillator) · 2.0 V to 5.5 V · 18 (bidirectional, 25 mA source/sink)

Contact for price

View Datasheet →

PIC16F720-I/SO

✅ Drop-In
Microchip Technology
📦 SOIC-20
PIC16 mid-range 8-bit RISC · 35 instructions, 14-bit word · 16 MHz (internal oscillator), up to 16 MIPS · 3.5 KB (2K x 14) · 128 B · 18 (17 I/O + 1 input-only) · 12-channel, 8-bit

Contact for price

View Datasheet →

PIC16F722-I/SO

✅ Drop-In ⚠️ Specs Unverified
Microchip Technology
📦 SOIC-20
8-bit RISC Flash Microcontroller (MCU) · PIC16 mid-range core, 35 single-word instructions · 200 ns · 20 MHz · 16 MHz internal · 3.5 KB (2K x 14 words) · 28-pin SOIC (SO-28), 0.50 mm pitch, surface mount · 2.5 V to 5.5 V

Contact for price

View Datasheet →

PIC16F1936T-I/SO

✅ Drop-In
📦 SOIC-20
Same manufacturer, 20-pin SOIC footprint, and 16 MHz operating class; advanced-family peripherals and register behavior differ while core performance remains within an approximately 80% compatibility match.

📋 Reference alternative (not in catalog)

PIC16F721-E/SO Maximum Ratings & Electrical Characteristics

Product Type 8-bit RISC microcontroller
Maximum Clock Frequency 16 MHz
Program Memory 7 KB flash (4K x 14)
Data Memory 256 B SRAM
Non-Volatile Data Memory 128 B
General-Purpose I/O 18 I/O
ADC Resolution 8 bit
ADC Channel Count 12 channels
Operating Voltage 2.5 V, 3.3 V, or 5 V
Instruction Set 35 instructions
Stack Depth 8 levels
Timer Count Two 8-bit timers and one 16-bit timer
Serial Interfaces I2C, SPI, and AUSART
Capture/Compare/PWM CCP module
System Protection Watchdog timer, power-on reset, and brown-out reset
Programming In-circuit serial programming
I/O Drive Capability 25 mA source/sink
Package 20-pin SOIC, 0.295 inch body width
Mounting Type Surface mount
Internal Oscillator 16 MHz

PIC16F721-E/SO 20-pin soic, 0.295 inch body width Pin Configuration Guide

Pin configuration for PIC16F721-E/SO (20-pin soic, 0.295 inch body width package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

20-pin soic, 0.295 inch body width package pinout diagram for PIC16F721-E/SO

No detailed pinout data available for PIC16F721-E/SO.

Refer to the datasheet for full pin configuration.

Typical Applications

PIC16F721-E/SO is suitable for 6 applications: Industrial Sensor Controller, Digital Thermometer, Compact Motor and Valve Control, Building Automation Module, Serial Data-Acquisition Front End, Power-Supply Monitor.

🏭

Industrial Sensor Controller

The PIC16F721-E/SO fits industrial sensor nodes that combine several analog measurements with local digital control. Its 12-channel, 8-bit ADC can monitor pressure, temperature, level, or potentiometer signals, while 18 I/O provide inputs, alarm outputs, and digital interlocks. The 16 MHz core gives sufficient headroom for filtering, calibration, communications, and supervisory logic. I2C or SPI can connect remote sensors, while AUSART supports service links or local displays. A key design consideration is keeping analog routing away from switching nodes and programming signals.

🌡️

Digital Thermometer

A compact PIC16F721-E/SO measurement system can use its 12-channel ADC to digitize a resistive or ratiometric temperature sensor without a separate ADC. The controller can apply calibration, filtering, and hysteresis, then display or transmit the result through I2C, SPI, or AUSART. Its 7 KB flash is sufficient for lookup tables and conversion routines, while the 256-byte SRAM supports temporary measurements and communication buffering. For accurate results, use a quiet reference arrangement, separate analog and digital return paths, and calibrated timing rather than relying on raw conversion codes alone.

🔧

Compact Motor and Valve Control

The PIC16F721-E/SO can control compact motors, solenoids, or valves where deterministic pulse timing and manageable I/O count are important. Its 16 MHz clock supports the CCP module and timer resources used to generate pulse-width-modulated actuator commands, monitor feedback switches, and coordinate interlocks. The 25 mA source/sink I/O capability is suitable for control signals, while external transistors or drivers should handle higher current. Firmware should include startup limits, watchdog recovery, and safe-state behavior when a sensor or communication timeout occurs.

🏠

Building Automation Module

PIC16F721-E/SO-based building modules can monitor environmental sensors and drive lighting, HVAC, or occupancy-related outputs. The 18-I/O count allows multiple discrete inputs and relay-control signals, and the three principal serial interfaces support local sensors, remote nodes, and service equipment. Its 256-byte SRAM and 7 KB flash support moderate protocol handling without requiring a high-performance processor. In building equipment, enforce watchdog recovery and define safe output states during reset or communications failure. The 12-channel ADC can also supervise analog feedback from sensors and power rails.

📟

Serial Data-Acquisition Front End

The PIC16F721-E/SO can serve as a modest data-acquisition front end when samples do not require continuous high-rate streaming. Engineers can scan up to 12 analog channels through the ADC, apply scaling and filtering, and transfer results using SPI, I2C, or AUSART. Its 16 MHz processing speed supports deterministic sampling tasks and protocol overhead, while flash accommodates calibration tables and configuration logic. Keep the converter input impedance, source impedance, and acquisition timing within the manufacturer recommendations, and avoid loading sensitive sensor outputs during multiplexed scans.

⚡

Power-Supply Monitor

PIC16F721-E/SO is suitable for monitoring and supervisory control in compact power modules because the ADC can sample voltage, current, or temperature feedback while the CCP and timers support control functions. The device can coordinate enable sequencing, fault flags, and data reporting through I2C, SPI, or AUSART. Its brown-out reset and watchdog features improve recovery behavior, although the power stage still requires independent protection. Design the sensing network so switching-node transients do not saturate the ADC input, and keep the MCU supply and ground arrangement robust against regulator output ripple.

What are the key specifications of PIC16F721-E/SO that engineers should know?
The PIC16F721-E/SO is an 8-bit microcontroller rated for up to 16 MHz with 7 KB of flash, 256 bytes of SRAM, and 18 I/O pins. According to the Microchip PIC16F721 product page, it also includes a 12-channel, 8-bit ADC, I2C, SPI, AUSART, CCP, two 8-bit timers, one 16-bit timer, watchdog, power-on reset, and brown-out reset. It is packaged in a 20-pin SOIC and supports in-circuit serial programming.
Where can I download the PIC16F721 datasheet PDF?
The PIC16F721 datasheet PDF is available from the official Microchip PIC16F721 product page, which provides the linked Data Sheet document. The device is an 8-bit, 16 MHz PIC16 microcontroller with 7 KB of flash, 256 bytes of SRAM, and a 12-channel ADC. Use the manufacturer's pin-description table and electrical-characteristics tables when assigning PCB tracks or designing the power supply.
Where can I find the PIC16F721-E/SO pinout?
The PIC16F721-E/SO pinout is shown in the Microchip PIC16F721 manufacturer datasheet under the pin-description table. The device uses a 20-pin SOIC package and includes analog, digital I/O, power, ground, clock, programming, and communication functions. Assign tracks by the numbered package drawing and use the manufacturer pin table for exact signal names rather than relying on generic package diagrams.
What is PIC16F721-E/SO used for?
The PIC16F721-E/SO is used for compact embedded control, analog measurement, and serial-connected automation. Its 16 MHz core, 18 I/O, 12-channel 8-bit ADC, and I2C/SPI/AUSART peripherals suit sensor interfaces, industrial controllers, digital thermometers, power-conversion modules, compact motor controls, and building-automation nodes. The 7 KB flash and 256-byte SRAM are appropriate for moderate control logic rather than complex graphical or high-volume data processing.
PIC16F721-E/SO vs PIC16F720-I/SO — which is better for an ADC control board?
PIC16F721-E/SO is the stronger choice when a design benefits from the PIC16F721's stated 12-channel, 8-bit ADC, 16 MHz operating speed, and 18-I/O configuration. PIC16F720-I/SO is a close same-package family option, but its ADC and memory details should be checked against the original schematic before substitution. Both are Microchip 20-pin SOIC devices intended for PIC16-family firmware and peripheral workflows.
What is the difference between PIC16F721-E/SO and PIC16F721T-I/SO?
PIC16F721-E/SO and PIC16F721T-I/SO belong to the same PIC16F721 family and share the 20-pin SOIC format, 16 MHz architecture, 7 KB flash, and 256-byte SRAM identity. Their temperature and ordering suffixes indicate different device-grade or packaging configurations. Use the manufacturer ordering table to confirm which grade is required for the board's ambient range and production configuration.
When should I choose PIC16F721-E/SO over PIC16F1936T-I/SO?
Choose PIC16F721-E/SO when the design is standardized around its 16 MHz PIC16 core, 7 KB flash, 256-byte SRAM, and 12-channel ADC. PIC16F1936T-I/SO can be considered when its separately documented peripherals and qualification better match the product requirements. Both appear in the 20-pin SOIC family, but firmware, register compatibility, interrupt behavior, and peripheral mapping must be reviewed before changing the BOM.
Is PIC16F721-E/SO suitable for industrial sensing and control?
PIC16F721-E/SO is suitable for many industrial sensing and control designs because it combines a 16 MHz 8-bit core, 18 I/O, a 12-channel ADC, and I2C, SPI, and AUSART interfaces. The device also provides watchdog, power-on reset, and brown-out reset functions that support reliable embedded operation. Verify the exact operating-temperature limits and any sector-specific qualification requirements before final release.
What can replace PIC16F721-E/SO?
A direct replacement should use the same 20-pin SOIC footprint and retain compatible pin functions, clock architecture, memory organization, and peripheral behavior. PIC16F721-I/SO and PIC16F721T-I/SO are the closest same-family choices, while PIC16F720-I/SO and PIC16F1936T-I/SO require closer review of ADC, memory, and firmware compatibility. No cross-brand drop-in equivalent was established for this device.
Can PIC16F720-I/SO replace PIC16F721-E/SO without PCB changes?
PIC16F720-I/SO uses the same 20-pin SOIC format, so an existing footprint can generally accommodate it, but a pin- and firmware-compatible substitution is not established solely by package equality. Compare the power pins, I2C, SPI, AUSART, ADC inputs, CCP outputs, timers, interrupt vectors, configuration words, and programming interface. Approve the substitution only after the Microchip device documentation confirms the affected functions.
What is the best Microchip equivalent for PIC16F721-E/SO?
The best same-manufacturer starting points are PIC16F721-I/SO for an alternate ordering configuration, PIC16F721T-I/SO for the alternate graded family member, and PIC16F720-I/SO for a closely related 20-pin family option. No verified cross-brand drop-in equivalent was identified. Choose according to temperature grade, ADC requirements, memory footprint, peripheral mapping, and qualification rather than package appearance alone.
Where can I buy PIC16F721-E/SO online?
Use the Request a Quote form on this page to ask for PIC16F721-E/SO availability, current commercial terms, and a shipment lead time. The part is listed as an active Microchip product with a 20-pin SOIC package. When requesting a quotation, identify the exact suffix PIC16F721-E/SO and state the required tube or reel packaging, production quantity, and temperature expectations.
What is the price of PIC16F721-E/SO?
The current commercial price for PIC16F721-E/SO is best obtained through the Request a Quote form on this page because quotation terms and available quantities can change. Submit the exact MPN, required quantity, and packaging preference. The structured product page separates the underlying market listing from customer-specific pricing so the displayed quote can reflect current availability.
What is the lead time for PIC16F721-E/SO?
Request the current lead time for PIC16F721-E/SO through the Request a Quote form on this page. Include your annual usage, production schedule, and required packaging so the manufacturing plan can be evaluated against the exact 20-pin SOIC ordering configuration. Microchip lists the PIC16F721 family as in production, but order-specific timing should be confirmed for the selected suffix and quantity.
Is PIC16F721-E/SO in stock?
Current stock for the exact PIC16F721-E/SO ordering configuration should be confirmed through the Request a Quote form on this page. The manufacturer lists the PIC16F721 family as in production, and distributor listings reference the 20-pin SOIC device, but that does not guarantee inventory for every quantity break or packaging format. State your required quantity and tube-or-reel preference in the request.

Engineering reference data for PIC16F721-E/SO — comparison, design guidance, and compliance information.

Selection Guide

Choose PIC16F721-E/SO for compact embedded systems that require a 16 MHz 8-bit core, 7 KB of flash, 256 bytes of SRAM, 18 I/O, and a 12-channel 8-bit ADC in a 20-pin SOIC package. Select PIC16F721-I/SO or PIC16F721T-I/SO when the product specification favors a different ordering or temperature-grade configuration while retaining the closest family behavior. Evaluate PIC16F720-I/SO for a related 20-pin PIC16 design, but verify ADC features, memory, pin multiplexing, and firmware support before substitution. PIC16F722-I/SO may be considered when lower program-memory demand outweighs the target's larger flash capacity. PIC16F1936T-I/SO is useful when a newer Microchip family's peripherals are preferred. For every candidate, validate pin functions, electrical limits, programming, and qualification rather than relying on package equality alone.

Comparison with Alternatives

Parameter This Product PIC16F721-I/SO PIC16F721T-I/SO PIC16F720-I/SO PIC16F722-I/SO PIC16F1936T-I/SO
Package SOIC-20 SOIC-20 SOIC-20 SOIC-20 SOIC-20 SOIC-20
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
CPU Type 8-bit RISC 8-bit RISC 8-bit RISC 8-bit RISC 8-bit RISC 8-bit RISC

Key Differentiators

  • Closest alternate ordering configuration (vs PIC16F721-I/SO)
  • Documented same-family grading option (vs PIC16F721T-I/SO)
  • Related family alternative with PCB reuse (vs PIC16F720-I/SO)
  • Expanded advanced-family option (vs PIC16F1936T-I/SO)

Design Notes

Place the MCU decoupling capacitor at the VDD and VSS pins using the shortest, lowest-inductance connection available. Keep the programming interface and its signal traces accessible without crossing sensitive analog inputs. Because this device combines high-speed digital activity with multiplexed ADC channels, route analog returns directly to the device ground reference and avoid sharing narrow paths with switching or relay-control currents.

Treat analog and digital layout as separate subsystems within the same controller. Connect sensor returns to the device-side ground point, keep ADC traces short, and separate them from I2C, SPI, AUSART, timer, and programming routes. If the measured source has high impedance, account for acquisition time and sampling capacitance in the channel-switching sequence. Validate the selected firmware configuration and pin multiplexing against the manufacturer's pin-description table.

The PIC16F721-E/SO supports 2.5 V, 3.3 V, and 5 V operation, but the selected supply voltage must also match the external sensors and communication devices. Check input and output limits in the manufacturer electrical-characteristics tables before applying a rail. Use brown-out reset behavior that suits the system, and ensure the firmware places outputs in a defined state during reset, watchdog recovery, and startup.

Do not treat equal package dimensions as proof of software or peripheral compatibility. A replacement must be checked for power pins, oscillator functions, programming signals, ADC channels, CCP outputs, timer assignments, interrupt vectors, configuration bits, and register behavior. For the closest same-family alternatives, preserve the exact Microchip ordering suffix and validate programming with the intended production toolchain before releasing a new PCB revision.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The exact compliance declarations and qualification status for the PIC16F721-E/SO suffix require confirmation from the manufacturer product and ordering documentation. The E suffix should not be treated as proof of AEC-Q100 qualification without the applicable Microchip documentation.

Data verified on: 2026-11-19 — data verified and curated by XAIPART's component engineering team

Related Searches

pic16f721 datasheet PIC16F721-E/SO PIC16F721-E/SO datasheet PIC16F721-E/SO pinout PIC16F721-E/SO replacement PIC16F721-E/SO equivalent PIC16F721-E/SO price PIC16F721-E/SO stock PIC16F721 16MHz 8-bit microcontroller PIC16F721 SOIC-20 pinout PIC16F721 ADC application PIC16F721 vs PIC16F720

Related Components & Terms

Microchip Technology PIC16F721-E/SO PIC16F721-I/SO PIC16F721T-I/SO PIC16F720-I/SO PIC16F722-I/SO PIC16F1936T-I/SO PIC16 microcontroller 8-bit microcontroller RISC microcontroller embedded controller semiconductor I2C SPI AUSART CCP ADC watchdog timer brown-out reset power-on reset in-circuit serial programming SOIC-20 surface-mount package industrial sensor control firmware
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details