PIC24EP64GP202-I/SO - 70 MIPS 64KB Flash MCU | Microchip
MPN: PIC24EP64GP202-I/SO ✓ ActivePIC24EP64GP202-I/SO Overview
A microcontroller is a programmable semiconductor that integrates a processor core, memory, digital I/O and peripherals on one device. The PIC24EP64GP202 belongs to the PIC24E family of 16-bit general-purpose MCUs, a category positioned between simple 8-bit controllers and more complex 32-bit application processors. This device provides the processing performance and analog integration needed to consolidate functions that otherwise require separate analog and digital components.
Key features include the 70 MIPS CPU core, 64 KB of Flash program memory organized as 22K × 24 words, and 8 KB of SRAM. Its integrated analog resources include three operational amplifiers, four comparators, CTMU and the Peripheral Trigger Generator. These resources support measurement, conditioning, motor-control, feedback and event-timing functions while reducing external component count. The listed operating supply range is 3.0 V to 3.6 V.
The PIC24E core combines a 16-bit architecture with a high-speed peripheral set and strong code density. The 28-pin SOIC provides 83 I/O according to the device listing, allowing simultaneous digital communication, control outputs and analog signal inputs where board routing permits. The integrated operational amplifiers and comparators can implement instrumentation and closed-loop control functions, while CTMU assists capacitive measurement and timing applications.
Typical applications include industrial sensor interfaces, precision control systems, motor and actuator controllers, laboratory equipment and embedded measurement products. The device is especially useful when analog conditioning, threshold detection and deterministic control must share a compact platform. Designers should allocate pins for programming and debugging, keep analog and digital return currents separated, and verify every peripheral connection against the manufacturer pin-description table.
The industrial-grade ordering code is intended for operation across an extended commercial temperature range, while the SO package supports conventional surface-mount assembly. Careful PCB planning should provide a continuous ground plane, short analog routes and adequate decoupling at each supply pin. Decoupling capacitor selection and placement should follow the manufacturer’s recommended application circuit and layout guidance.
This product overview combines the device’s processing, memory and analog capabilities with practical sourcing, comparison and design guidance. It identifies the exact ordering code and package while helping engineers determine whether the PIC24EP64GP202-I/SO fits a compact, analog-rich embedded control design.
Drop-in alternatives for PIC24EP64GP202-I/SO — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with PIC24EP64GP202-I/SO (same form factor and footprint) — differing in Package, ADC, Core Architecture, Maximum CPU Speed, Operating Temperature.
PIC24EP64GP202-E/SO
✅ Drop-InContact for price
View Datasheet →PIC24EP64GP202-I/SO Maximum Ratings & Electrical Characteristics
| CPU Architecture | 16-bit PIC24E core |
| Maximum CPU Performance | 70 MIPS |
| Listed Clock Speed | 60 MHz |
| Program Memory | 64 KB Flash (22K × 24 words) |
| SRAM | 8 KB |
| Data Bus | 8 bit |
| Operating Supply Voltage | 3.0 V to 3.6 V |
| I/O Ports | 83 |
| Internal Operational Amplifiers | 3 |
| Internal Comparators | 4 |
| Analog Resources | CTMU and Peripheral Trigger Generator (PTG) |
| Package | 28-pin SOIC, 10 mm × 10 mm, 1.10 mm height |
| Mounting Type | Surface mount |
| Lifecycle Stage | Active |
| Temperature Grade | Industrial grade, -40°C to +85°C |
PIC24EP64GP202-I/SO 28-pin soic, 10 mm × 10 mm, 1.10 mm height Pin Configuration Guide
Pin configuration for PIC24EP64GP202-I/SO (28-pin soic, 10 mm × 10 mm, 1.10 mm height package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for PIC24EP64GP202-I/SO.
Refer to the datasheet for full pin configuration.
Typical Applications
PIC24EP64GP202-I/SO is suitable for 6 applications: Industrial Sensor Interface, Precision Control Systems, Capacitive Touch and Human Interface, Motor and Actuator Control, Laboratory and Test Equipment, Embedded Measurement Hub.
Industrial Sensor Interface
The PIC24EP64GP202-I/SO fits industrial sensing platforms that combine transducer conditioning, threshold detection and digital control in one processor. Its three internal operational amplifiers and four comparators can support signal amplification and limit detection, while the 70 MIPS core leaves processing capacity for filtering, diagnostics and communication tasks. The 3.0 V to 3.6 V operating range, 8 KB SRAM and 64 KB Flash memory provide enough space for compact acquisition and control firmware. Using the integrated analog resources can also shorten sensitive signal paths, although each amplifier and comparator connection must remain within its specified input and output limits.
Recommended
Precision Control Systems
PIC24EP64GP202-I/SO is appropriate for closed-loop industrial controllers that need deterministic response without the overhead of a higher-complexity processor. The 70 MIPS 16-bit core can execute control calculations while the CTMU, comparators and operational amplifiers support feedback acquisition and output conditioning. Its 64 KB Flash memory accommodates application code, configuration and interrupt routines, while 8 KB SRAM provides working space for control variables. The integrated analog blocks can shorten the feedback path and reduce board area, but designers must still account for loop stability, comparator latency and analog noise in the control budget.
Recommended
Capacitive Touch and Human Interface
The PIC24EP64GP202-I/SO can serve as the controller for capacitive touch keys, sliders or panel electrodes by combining CTMU measurement with the 70 MIPS processing core. The CTMU supports controlled timing and capacitance measurement, and the available Flash and SRAM permit event filtering, calibration storage and interface logic in a compact embedded design. Integrating the measurement peripheral avoids a separate timing IC and helps keep sensitive electrodes away from long digital routes. The PCB should use clean sensor grounding, guarded traces and controlled layout because moisture, contamination and nearby switching nodes can change the measured capacitance.
Recommended
Motor and Actuator Control
PIC24EP64GP202-I/SO is suitable for compact actuator controllers where current sensing, speed feedback, limit detection and digital sequencing must share one MCU. The internal comparators can monitor control signals, the three operational amplifiers can support analog feedback conditioning, and the 70 MIPS core can execute control and fault-management routines. Its 64 KB Flash capacity accommodates timing tables, state machines and application logic, while 8 KB SRAM supports real-time control variables. Pin assignment must carefully separate power-switching signals from sensitive analog returns, and thermal performance must be validated for the complete driver rather than the MCU alone.
Recommended
Laboratory and Test Equipment
The PIC24EP64GP202-I/SO can act as the control processor in compact laboratory instruments that generate, monitor or analyze analog signals. Its internal operational amplifiers reduce the need for separate conditioning channels, while the comparators provide fast threshold and protection functions. The 70 MIPS core can handle acquisition timing, calibration and instrument-state management, and the 64 KB Flash memory is suitable for firmware, calibration tables and communication routines. For accurate measurements, designers should use a low-noise reference strategy, short analog traces, separated ground returns and input filtering selected from the datasheet rather than relying only on digital averaging.
Recommended
Embedded Measurement Hub
PIC24EP64GP202-I/SO works well as a measurement hub combining several analog inputs, programmable events and a communications controller. The Peripheral Trigger Generator can coordinate peripheral events and timing relationships, while the comparators and operational amplifiers perform front-end conditioning. A 70 MIPS core provides enough throughput to aggregate readings, apply filtering and present results through serial interfaces, and the 64 KB Flash and 8 KB SRAM support structured firmware and data buffers. The 28-pin SOIC footprint saves board area, but careful budgeting is required because 83 I/O does not imply that every peripheral function can be assigned simultaneously.
Recommended
Recommended Products Summary
Engineering reference data for PIC24EP64GP202-I/SO — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | PIC24EP64GP202-E/SO |
|---|---|---|
| Package | 28-pin SOIC, 10 mm × 10 mm | 28-pin SOIC, 10 mm × 10 mm |
| Brand | Microchip Technology | Microchip Technology |
| CPU Architecture | 16-bit PIC24E core | 16-bit PIC24E core |
| Program Memory | 64 KB Flash (22K × 24 words) | 64 KB Flash (22K × 24 words) |
| Temperature Grade | Industrial grade, -40°C to +85°C | Extended temperature grade |
| Internal Operational Amplifiers | 3 | 3 |
| Internal Comparators | 4 | 4 |
| Analog Resources | CTMU and Peripheral Trigger Generator (PTG) | CTMU and Peripheral Trigger Generator (PTG) |
Key Differentiators
- High-performance integrated analog resources (vs PIC24EP64GP202-E/SO)
- 70 MIPS processing for the industrial ordering code (vs PIC24EP64GP202-E/SO)
- 28-pin SOIC integration preserves PCB footprint reuse (vs PIC24EP64GP202-E/SO)
Design Notes
The PIC24EP64GP202-I/SO operates from 3.0 V to 3.6 V, so the power architecture must remain within that range during startup, sleep and maximum processing activity. Place the required bypass capacitors close to the supply and ground pins, using the manufacturer’s recommended values and layout. Separate sensitive analog supplies from switching-node returns where possible, and verify the voltage at the device pins rather than only at the regulator output.
Keep analog inputs, operational-amplifier inputs and CTMU sensing lines short, with a continuous ground reference beneath the signal path. Route high-current switching returns away from sensitive traces and use a quiet analog ground region if the board architecture permits. Check all peripheral multiplexing assignments in the pin-description table because the device offers many peripherals but only 28 physical pins.
Do not select a substitute based only on flash size or clock speed. Firmware migration also depends on the 8-bit peripheral bus, I/O mapping, analog-function availability, interrupt behavior and package pin assignment. The -I/SO and -E/SO ordering codes share the 28-pin SOIC format but represent different temperature grades, so substitute approval must include environmental review, production-status review and the manufacturer’s pin-description table.
For CTMU capacitance measurements, control copper, connector geometry, humidity exposure and nearby noise sources because they can change the parasitic capacitance seen by the device. Use guarded sensor layouts and calibrated reference channels, and follow the recommended measurement sequence. For analog signal conditioning, confirm amplifier bandwidth, common-mode range and output swing against the intended sensor and load before enabling the internal op amps.
Compliance Information
The industrial-grade MCU is not presented as an AEC-Q100-qualified automotive device. RoHS, REACH, lead-free, halogen-free and conflict-minerals declarations were not established in the available product information.