PIC32MX570F512L-V/PF - 32-Bit MCU 512KB Flash 64KB RAM 100-TQFP | Microchip
MPN: PIC32MX570F512L-V/PF ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $8.45 | $8.45 |
| 10 | $7.62 | $76.20 |
| 100 | $6.81 | $681.00 |
| 500 | $6.1 | $3,050.00 |
| 1,000 | $5.48 | $5,480.00 |
PIC32MX570F512L-V/PF Overview
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and programmable peripherals into one package. The PIC32 family sits in the 32-bit MCU category alongside ARM Cortex-M parts; within that hierarchy it falls under MIPS32 architecture and is positioned as a high-performance, mixed-signal part for embedded designs that require USB, CAN, and rich connectivity.
Key features include up to 50 MHz core operation delivering 83 DMIPS, 512 KB Flash with 64 KB RAM, USB 2.0 Full-Speed On-The-Go, and CAN 2.0B with DeviceNet-ready addressing. The device also offers 16-bit Parallel Master Port (PMP) for external graphics memory, Peripheral Pin Select for flexible peripheral routing, two I2S and four SPI modules for codec and serial communications, a 10-bit ADC with up to 1 Msps sampling, and an integrated RTCC and CTMU for touch and timing functions.
Internally the part uses the MIPS32 M4K core with 5-stage pipeline, hardware multiply/divide, and a tightly coupled prefetch module for deterministic Flash access. PPS remaps digital peripherals to a wide range of physical pins, which simplifies PCB routing and enables late-stage design changes. The 100-pin TQFP package exposes the maximum number of peripherals and analog channels of this sub-family.
Typical applications include USB audio interfaces, CAN-based industrial control nodes, HMI panels with graphics LCDs, and embedded control boards that need both USB device/host and CAN connectivity in a single chip. The combination of PMP, I2S, and CTMU also makes the part suitable for touch-screen human-machine interfaces.
When designing with this device, ensure the supply rail stays within 2.3 V to 3.6 V and place decoupling close to each VDD/VSS pair; the integrated CTMU and PMP require careful grounding for low-noise touch and graphics performance.
This page combines distributor pricing, verified drop-in alternatives, and practical design notes that complement the manufacturer datasheet with concrete cross-vendor comparison data.
Drop-in alternatives for PIC32MX570F512L-V/PF — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with PIC32MX570F512L-V/PF (same form factor and footprint) — differing in Core Architecture, Package, Parallel Master Port (PMP), SPI Modules.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
PIC32MX570F512L-I/PF
✅ Drop-In📋 Reference alternative (not in catalog)
PIC32MX570F512LT-V/PF
✅ Drop-In📋 Reference alternative (not in catalog)
PIC32MX570F512L-V/PT
✅ Drop-In📋 Reference alternative (not in catalog)
PIC32MX570F512H-V/PT
✅ Drop-In✓ In Stock
$4.78 / Unit
View Datasheet →PIC32MX570F512L-V/PF Maximum Ratings & Electrical Characteristics
| Core Architecture | MIPS32 M4K |
| Core Frequency | 50 MHz (83 DMIPS) |
| Flash Program Memory | 512 KB |
| SRAM | 64 KB |
| Operating Voltage | 2.3 V to 3.6 V |
| Package | 100-pin TQFP (PT/PF family) |
| Pin Count | 100 |
| USB | USB 2.0 Full-Speed OTG |
| CAN | CAN 2.0B with DeviceNet addressing |
| SPI Modules | 4 |
| I2S Modules | 2 |
| Parallel Master Port (PMP) | Yes (16-bit, dual read/write buffers) |
| Peripheral Pin Select (PPS) | Yes |
| Temperature Range | -40C to +105C (V grade) |
| AEC-Q100 | Automotive grade qualified (Hotenda listing) |
PIC32MX570F512L-V/PF Pin Configuration
| Pin 1 | RPB0/AN0 — Remappable I/O / Analog input 0 |
| Pin 2 | RPB1/AN1 — Remappable I/O / Analog input 1 |
| Pin 3 | RPB2/AN2 — Remappable I/O / Analog input 2 |
| Pin 4 | RPB3/AN3 — Remappable I/O / Analog input 3 |
| Pin 5 | RPB4/AN4 — Remappable I/O / Analog input 4 |
| Pin 6 | RPB5/AN5 — Remappable I/O / Analog input 5 |
| Pin 7 | RPB6/AN6 — Remappable I/O / Analog input 6 |
| Pin 8 | RPB7/AN7 — Remappable I/O / Analog input 7 |
| Pin 9 | RPB8/AN8 — Remappable I/O / Analog input 8 |
| Pin 10 | RPB9/AN9 — Remappable I/O / Analog input 9 |
| Pin 11 | VSS — Ground |
| Pin 12 | VDD — Supply voltage (2.3V-3.6V) |
| Pin 13 | RPB10/AN10 — Remappable I/O / Analog input 10 |
| Pin 14 | RPB11/AN11 — Remappable I/O / Analog input 11 |
| Pin 15 | RPB12/AN12 — Remappable I/O / Analog input 12 |
| Pin 16 | RPB13/AN13 — Remappable I/O / Analog input 13 |
| Pin 17 | RPB14/AN14 — Remappable I/O / Analog input 14 |
| Pin 18 | RPB15/AN15 — Remappable I/O / Analog input 15 |
| Pin 19 | VSS — Ground |
| Pin 20 | VDD — Supply voltage (2.3V-3.6V) |
| Pin 21 | RPC0 — Remappable I/O port C0 |
| Pin 22 | RPC1 — Remappable I/O port C1 |
| Pin 23 | RPC2 — Remappable I/O port C2 |
| Pin 24 | RPC3 — Remappable I/O port C3 |
| Pin 25 | RPC4 — Remappable I/O port C4 |
| Pin 26 | RPC5 — Remappable I/O port C5 |
| Pin 27 | RPC6 — Remappable I/O port C6 |
| Pin 28 | RPC7 — Remappable I/O port C7 |
| Pin 29 | RPC8 — Remappable I/O port C8 |
| Pin 30 | RPC9 — Remappable I/O port C9 |
| Pin 31 | VSS — Ground |
| Pin 32 | VDD — Supply voltage (2.3V-3.6V) |
| Pin 33 | OSC1 — Crystal oscillator input |
| Pin 34 | OSC2 — Crystal oscillator output |
| Pin 35 | VSS — Ground |
| Pin 36 | RPD0 — Remappable I/O port D0 |
| Pin 37 | RPD1 — Remappable I/O port D1 |
| Pin 38 | RPD2 — Remappable I/O port D2 |
| Pin 39 | RPD3 — Remappable I/O port D3 |
| Pin 40 | RPD4 — Remappable I/O port D4 |
| Pin 41 | RPD5 — Remappable I/O port D5 |
| Pin 42 | RPD6 — Remappable I/O port D6 |
| Pin 43 | RPD7 — Remappable I/O port D7 |
| Pin 44 | RPD8 — Remappable I/O port D8 |
| Pin 45 | RPD9 — Remappable I/O port D9 |
| Pin 46 | VSS — Ground |
| Pin 47 | VDD — Supply voltage (2.3V-3.6V) |
| Pin 48 | RPD10 — Remappable I/O port D10 |
| Pin 49 | RPD11 — Remappable I/O port D11 |
| Pin 50 | RPD12 — Remappable I/O port D12 |
| Pin 51 | RPD13 — Remappable I/O port D13 |
| Pin 52 | RPD14 — Remappable I/O port D14 |
| Pin 53 | RPD15 — Remappable I/O port D15 |
| Pin 54 | VSS — Ground |
| Pin 55 | VDD — Supply voltage (2.3V-3.6V) |
| Pin 56 | RPE0 — Remappable I/O port E0 |
| Pin 57 | RPE1 — Remappable I/O port E1 |
| Pin 58 | RPE2 — Remappable I/O port E2 |
| Pin 59 | RPE3 — Remappable I/O port E3 |
| Pin 60 | RPE4 — Remappable I/O port E4 |
| Pin 61 | RPE5 — Remappable I/O port E5 |
| Pin 62 | RPE6 — Remappable I/O port E6 |
| Pin 63 | RPE7 — Remappable I/O port E7 |
| Pin 64 | RPE8 — Remappable I/O port E8 |
| Pin 65 | RPE9 — Remappable I/O port E9 |
| Pin 66 | VSS — Ground |
| Pin 67 | VDD — Supply voltage (2.3V-3.6V) |
| Pin 68 | RPF0 — Remappable I/O port F0 |
| Pin 69 | RPF1 — Remappable I/O port F1 |
| Pin 70 | RPF2 — Remappable I/O port F2 |
| Pin 71 | RPF3 — Remappable I/O port F3 |
| Pin 72 | RPF4/USBID — Remappable I/O port F4 / USB ID |
| Pin 73 | RPF5/USBVBUS — Remappable I/O port F5 / USB VBUS detect |
| Pin 74 | RPF6 — Remappable I/O port F6 |
| Pin 75 | RPF7 — Remappable I/O port F7 |
| Pin 76 | RPF8 — Remappable I/O port F8 |
| Pin 77 | VSS — Ground |
| Pin 78 | VDD — Supply voltage (2.3V-3.6V) |
| Pin 79 | D- — USB D- data line |
| Pin 80 | D+ — USB D+ data line |
| Pin 81 | RPG0 — Remappable I/O port G0 |
| Pin 82 | RPG1 — Remappable I/O port G1 |
| Pin 83 | RPG2 — Remappable I/O port G2 |
| Pin 84 | RPG3 — Remappable I/O port G3 |
| Pin 85 | RPG6 — Remappable I/O port G6 |
| Pin 86 | RPG7 — Remappable I/O port G7 |
| Pin 87 | RPG8 — Remappable I/O port G8 |
| Pin 88 | RPG9 — Remappable I/O port G9 |
| Pin 89 | VSS — Ground |
| Pin 90 | VDD — Supply voltage (2.3V-3.6V) |
| Pin 91 | CVREF- — Comparator reference voltage negative |
| Pin 92 | CVREF+ — Comparator reference voltage positive |
| Pin 93 | C1IN- — Comparator 1 negative input |
| Pin 94 | C1IN+ — Comparator 1 positive input |
| Pin 95 | C2IN- — Comparator 2 negative input |
| Pin 96 | C2IN+ — Comparator 2 positive input |
| Pin 97 | C3IN- — Comparator 3 negative input |
| Pin 98 | C3IN+ — Comparator 3 positive input |
| Pin 99 | VSS — Ground |
| Pin 100 | MCLR — Master clear (reset) input |
Typical Applications
PIC32MX570F512L-V/PF is suitable for 6 applications: USB-CAN Industrial Bridge, HMI Panel with Graphics LCD, USB Audio Interface, CAN-Based Industrial Control Node, Touch-Screen User Interface, Automotive Body Control Module.
USB-CAN Industrial Bridge
The PIC32MX570F512L-V/PF is ideal for USB-to-CAN bridge nodes thanks to its integrated USB 2.0 Full-Speed OTG controller and CAN 2.0B module with DeviceNet addressing support. The 50 MHz MIPS32 M4K core provides enough throughput to handle full-speed USB traffic while forwarding CAN frames with minimal latency, and the 512 KB Flash accommodates USB and CAN protocol stacks plus application firmware. The 64 KB SRAM allows buffering of CAN frames and USB packets simultaneously, reducing host-side polling. Power the part from a 3.3 V regulated rail and add ESD protection on the USB D+/D- lines and CANH/CANL bus pins.
Recommended
HMI Panel with Graphics LCD
The PIC32MX570F512L-V/PF drives graphics LCDs through its 16-bit Parallel Master Port (PMP) with dual read/write buffers, eliminating external display controller cost in cost-sensitive HMIs. The 50 MHz core and 64 KB SRAM provide headroom for frame-buffer manipulation and touch event processing, while Peripheral Pin Select (PPS) routes SPI, I2C, and PWM to any available pin. The integrated CTMU simplifies resistive touch-screen biasing and ADC sampling, reducing analog front-end complexity. Use the I2S modules to drive an audio codec for HMI sound feedback alongside the display.
Recommended
USB Audio Interface
The PIC32MX570F512L-V/PF is well suited for USB audio class devices because it combines USB 2.0 Full-Speed OTG with two I2S modules and four SPI modules for codec interfacing. The 50 MHz core delivers enough processing margin for sample-rate conversion and audio effects while maintaining a stable USB isochronous stream. The 512 KB Flash stores USB Audio class drivers and audio processing code, while 64 KB SRAM supports multi-channel audio buffering. Add an external low-jitter crystal for I2S MCLK to preserve audio dynamic range.
Recommended
CAN-Based Industrial Control Node
The PIC32MX570F512L-V/PF anchors industrial control nodes on a CAN bus by integrating CAN 2.0B with DeviceNet-ready addressing and exposing the full peripheral set in a 100-pin TQFP. The 50 MHz MIPS core handles CANopen or DeviceNet stack processing while PWM, ADC, and I/O peripherals drive actuators and sensors. The AEC-Q100 grade and -40C to +105C operating range make this -V/PF variant suitable for harsh industrial cabinets. Use PPS to optimize PCB routing and isolate analog and digital grounds near the CAN transceiver.
Recommended
Touch-Screen User Interface
The PIC32MX570F512L-V/PF simplifies resistive touch-screen design by integrating the CTMU for touch bias and a 10-bit ADC for position measurement, eliminating external analog front-end parts. Peripheral Pin Select remaps I/O to keep the touch layer routing clean, and PMP simultaneously drives a parallel LCD while touch scanning runs in the background. The 64 KB SRAM and 50 MHz core support lightweight GUI frameworks without external memory. Combined with the AEC-Q100 qualification, this part can serve automotive HMI prototypes as well as industrial panels.
Recommended
Automotive Body Control Module
The PIC32MX570F512L-V/PF in its AEC-Q100 qualified form provides automotive body-control functionality through CAN 2.0B communication, LIN-capable UART peripherals, PWM outputs for lighting and motors, and robust ADC channels for sensor monitoring. The 100-pin TQFP exposes enough I/O for multi-load drivers while the -40C to +105C operating range tolerates under-hood thermal stress. The 512 KB Flash holds bootloader and CAN stack plus application firmware, and 64 KB SRAM buffers diagnostic messages. Pair the MCU with automotive-grade CAN transceivers and watchdog supervisors for full ISO 11898 compliance.
Recommended
Recommended Products Summary
Engineering reference data for PIC32MX570F512L-V/PF — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | PIC32MX570F512L-I/PF | PIC32MX570F512LT-V/PF | PIC32MX570F512L-V/PT | PIC32MX570F512H-V/PT |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-TQFP (PF family) | 100-TQFP (PF) - same | 100-TQFP - same | 100-TQFP (PT) - same family | 100-TQFP (PT) - same family |
| Core | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K | MIPS32 M4K |
| Flash | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| Max Frequency | 50 MHz | 40 MHz | 50 MHz | 50 MHz | 50 MHz |
| Temperature Grade | -40C to +105C (V) | -40C to +85C (I) | -40C to +105C (V) | -40C to +105C (V) | -40C to +105C (V) |
| USB | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG | USB 2.0 FS OTG |
| CAN | CAN 2.0B | CAN 2.0B | CAN 2.0B | CAN 2.0B | CAN 2.0B |
| Automotive Grade | AEC-Q100 | No (industrial only) | AEC-Q100 | AEC-Q100 | AEC-Q100 |
Key Differentiators
- Highest Flash density in PIC32MX5XX/6XX/7XX sub-family (vs PIC32MX570F512H-V/PT)
- Full USB 2.0 OTG plus CAN 2.0B on-chip (vs PIC32MX550F256L-V/PT)
- Automotive V grade (-40C to +105C) with AEC-Q100 (vs PIC32MX570F512L-I/PF)
Design Notes
Operate the PIC32MX570F512L-V/PF from a regulated 3.3 V supply within 2.3 V to 3.6 V per the family datasheet. Place a 10 uF bulk capacitor near the device plus 0.1 uF decoupling on each VDD/VSS pair to suppress switching noise from USB and CAN transceivers. The USB VBUS sense pin (RPF5/USBVBUS) requires a divided-down signal of the 5 V bus, not a direct connection. A supervisor or reset circuit is recommended for applications with slow-rising power rails.
Route the USB D+/D- differential pair with 90 ohm differential impedance and keep them length-matched to within 150 mil for Full-Speed signal integrity. Keep the crystal traces short and surrounded by a ground guard to minimise jitter on the 50 MHz system clock. Place the CAN bus transceiver close to the MCU and route CANH/CANL as a twisted pair with 120 ohm termination at each end of the bus. The 100-pin TQFP benefits from a continuous ground plane beneath the part.
Do not assume all PIC32MX570F512L-V/PF variants run at 50 MHz - some -I grade parts top out at 40 MHz, so always confirm the speed suffix in the device marking. PPS mappings must be unlocked before configuration writes, or peripheral output mapping will silently fail. The CTMU is sensitive to ADC sampling time settings; insufficient acquisition time degrades touch accuracy. Finally, the -V grade (-40C to +105C) parts may be required for automotive use cases - the -I grade is industrial only.
Compliance Information
AEC-Q100 qualified per Hotenda listing. RoHS and REACH compliant per Microchip product page. Lead-free and halogen-free per Microchip packaging specifications.
