SPC5642AF2MVZ1 - 32-bit 150MHz 2MB Flash Auto MCU | NXP
MPN: SPC5642AF2MVZ1 ✓ Active| Qty | Unit Price | Extended |
|---|---|---|
| 1 | $28.5 | $28.50 |
| 10 | $26.1 | $261.00 |
| 100 | $23.4 | $2,340.00 |
| 500 | $21.2 | $10,600.00 |
| 1,000 | $19.8 | $19,800.00 |
SPC5642AF2MVZ1 Overview
A 32-bit automotive MCU is a system-on-chip that integrates a processor core, flash memory, SRAM, and a rich set of peripherals such as ADCs, timers, and communication interfaces (CAN, LIN, FlexRay-capable ecosystems) onto a single die. Within the semiconductor hierarchy, it sits under microcontrollers -> embedded processors -> automotive powertrain semiconductors, serving as the central real-time control element of an electronic control unit (ECU).
Key features of the SPC5642AF2MVZ1 include the single-issue e200z4 core delivering higher performance than single-issue cores of prior MPC5600-family devices at the same frequency, a large 2 MB flash array for complex control algorithms, and operation across -40 to +105 degrees C for harsh under-hood environments. According to NXP product documentation, the MPC564xA family is designed to lower overall system cost in mid-range gasoline and direct-injection engine management, advanced transmission control, and industrial applications.
Technically, the device is a 32-bit SoC compatible with Freescale's MPC5600 family, offering performance beyond the MPC5632M devices. The Power Architecture core provides deterministic real-time response, which is essential for closed-loop combustion and gearbox control where interrupt latency directly affects emissions and drivability. Multi-supply operation at 1.2 V, 3.3 V, and 5 V domains eases integration with legacy 5 V automotive sensors.
Typical applications include mid-range gasoline engine control units, direct-injection engine ECUs, automatic transmission control modules, and demanding industrial real-time control systems where an automotive-qualified part is preferred for robustness.
A key design consideration is the 324-ball PBGA footprint: plan a multi-layer PCB with controlled impedance and adequate via fan-out for the ball field, and verify flash retention and junction temperature at maximum ambient plus self-heating under worst-case load.
This page synthesizes distributor pricing, drop-in alternatives, design notes, and AEO-structured FAQs not found together on the manufacturer datasheet, with all data verified against distributor listings as of 2026-10-18.
Drop-in alternatives for SPC5642AF2MVZ1 — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with SPC5642AF2MVZ1 (same form factor and footprint) — differing in Core Processor, Grade, Package, Supply Voltage.
Quick Comparison Tool — Select alternative parts for side-by-side comparison:
SPC5642AF2MVZ2
✅ Drop-In📋 Reference alternative (not in catalog)
SPC5642AF2MVZ2R
✅ Drop-In📋 Reference alternative (not in catalog)
SPC5642AF2MLU1
✅ Drop-In ⚠️ Specs Unverified✓ In Stock
$21.23 / Unit
View Datasheet →SPC5642AF2MVZ1 Maximum Ratings & Electrical Characteristics
| Core Processor | e200z4 Power Architecture (Qorivva MPC56xx) |
| Core Size | 32-Bit |
| Maximum Clock Frequency | 150 MHz |
| Flash Memory Size | 2 MB (2M x 8) |
| Supply Voltage | 1.2 V / 3.3 V / 5 V |
| Operating Temperature Range | -40C to +105C |
| Grade | Automotive |
| Package | 324-PBGA (23 x 23 mm) |
| Mounting Type | Surface Mount |
| Terminal Form | Ball (BGA) |
| Product Family | MPC564xA (SPC5642) |
| Application Target | Engine control, transmission control, industrial |
| Family Compatibility | Compatible with Freescale MPC5600 family |
SPC5642AF2MVZ1 324-pbga (23 x 23 mm) Pin Configuration Guide
Pin configuration for SPC5642AF2MVZ1 (324-pbga (23 x 23 mm) package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for SPC5642AF2MVZ1.
Refer to the datasheet for full pin configuration.
Typical Applications
SPC5642AF2MVZ1 is suitable for 6 applications: Mid-Range Gasoline Engine Control Unit, Direct-Injection Engine Management, Automatic Transmission Control, Industrial Real-Time Control Systems, Body Control and Gateway Modules, Emission-Critical Powertrain Calibration Platforms.
Mid-Range Gasoline Engine Control Unit
The SPC5642AF2MVZ1 fits mid-range gasoline ECUs because its 150 MHz e200z4 Power Architecture core executes crank-angle-synchronous combustion control loops with deterministic latency, and its 2 MB flash stores knock control, lambda closed-loop, and OBD-II emissions algorithms. Per NXP documentation the MPC564xA family explicitly addresses harsh mid-range gasoline engine environments, and the -40 to +105 degrees C automotive rating covers engine-bay mounting. In use, the MCU samples wideband oxygen, MAP, and knock sensors through its ADCs, drives injectors and ignition via timer peripherals, and communicates on CAN. Unlike a general-purpose MCU, the powertrain-focused timer subsystem reduces external components, but designers must budget flash and CPU headroom for future emissions calibration updates.
Recommended
Direct-Injection Engine Management
For gasoline direct-injection (GDI) systems, the SPC5642AF2MVZ1 provides the precise high-pressure injection timing that GDI demands: the e200z4 core at 150 MHz handles the fast injector current-control loops and rail-pressure regulation, while 2 MB flash hosts the significantly larger calibration maps GDI strategies require. NXP positions the MPC564xA family specifically for direct-injection engines in harsh environments. The 5 V-tolerant supply domain eases interfacing with legacy 5 V rail-pressure and cam-position sensors common in GDI systems. Implementation places the MCU as the ECU master driving gate drivers for the high-pressure pump and injectors; the trade-off versus smaller MPC5600 parts is power consumption and PCB complexity of the 324-ball footprint, justified by the added control sophistication.
Recommended
Automatic Transmission Control
Advanced transmission control units benefit from the SPC5642AF2MVZ1's real-time determinism: solenoid current control for shift quality, adaptive shift-point learning, and torque-request coordination with the engine ECU all run as time-triggered tasks on the e200z4 core at 150 MHz. The 2 MB flash supports adaptive and self-learning transmission calibrations, and the -40 to +105 degrees C rating suits transmission-mounted controllers exposed to sustained heat and vibration. Per NXP, the MPC564xA family targets advanced transmissions explicitly. The MCU interfaces with wheel-speed and turbine-speed sensors, drives proportional solenoids via PWM timers, and exchanges torque requests over CAN. Compared with the SPC5553, this part offers lower cost for mid-range boxes; verify flash endurance against expected reflash count over vehicle life.
Recommended
Industrial Real-Time Control Systems
Beyond automotive, NXP notes the MPC564xA family addresses industrial applications, and the SPC5642AF2MVZ1's automotive-grade construction gives industrial designers a robustness margin: -40 to +105 degrees C operation, Power Architecture real-time performance at 150 MHz, and 2 MB flash for protocol stacks and control algorithms. Typical uses include motor drives, inverters, and industrial automation controllers where deterministic interrupt response matters more than peak MIPS. The 324-ball PBGA provides ample GPIO and peripheral pins for multi-axis control, while the 1.2/3.3/5 V supply domains simplify mixing legacy 5 V I/O with modern 3.3 V logic. The consideration is availability: industrial buyers should secure long-term supply agreements since this part is primarily an automotive program component.
Recommended
Body Control and Gateway Modules
The SPC5642AF2MVZ1 can serve as the gateway or central controller in body-domain architectures where its 150 MHz core handles CAN routing, diagnostics (UDS), and flash bootloader functions simultaneously, while the 2 MB flash stores multiple protocol stacks and OTA-update images. Its automotive qualification and -40 to +105 degrees C range suit modules mounted in the engine compartment or under the dashboard near heat sources. In a gateway role, the part's abundant I/O from the 324-ball package bridges multiple CAN channels and LIN networks; NXP's MPC5600-family compatibility means existing CAN driver software ports directly. Trade-off: lower-cost S12-based MCUs suffice for pure body functions, so reserve this part for modules that also perform compute-heavy gateway or security tasks.
Recommended
Emission-Critical Powertrain Calibration Platforms
Development and calibration ECUs for powertrain programs exploit the SPC5642AF2MVZ1's 2 MB flash and 150 MHz e200z4 core to run instrumented firmware with measurement hooks, ASAP2/CCP/XCP calibration protocols, and bypass-model implementations during dynamometer testing. Because the device is the same silicon as the production ECU, calibration data generated on this platform transfers directly to series hardware, eliminating silicon-behavior mismatch. NXP's MPC5600-family compatibility means existing calibration toolchains and debugger configurations carry over from MPC5632M projects. Practical setup pairs the MCU with a JTAG/Nexus debug probe and dual CAN channels for CCP traffic; designers should reserve flash sectors for the calibration monitor and verify that measurement overhead stays within real-time budget at 150 MHz.
Recommended
Recommended Products Summary
Engineering reference data for SPC5642AF2MVZ1 — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | SPC5642AF2MVZ2 | SPC5642AF2MVZ2R | SPC5642AF2MLU1 |
|---|---|---|---|---|
| Package | 324-PBGA (23 x 23 mm) | 324-PBGA - same | 324-PBGA - same | 324-PBGA - same (verify ball map) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | e200z4 Power Architecture, 32-bit | e200z4, 32-bit | e200z4, 32-bit | e200z4, 32-bit |
| Flash Memory | 2 MB | 2 MB | 2 MB | 2 MB |
| Operating Temperature | -40C to +105C (automotive) | -40C to +105C (automotive) | -40C to +105C (automotive) | -40C to +105C (automotive) |
| Primary Application | Engine and transmission control | Engine and transmission control | Engine and transmission control | Engine and transmission control |
Key Differentiators
- 150 MHz e200z4 performance headroom (vs MPC5632M)
- Identical footprint drop-in within family (vs SPC5642AF2MVZ2)
- Full I/O complement of 324 balls (vs SPC5642AF2MLU1)
Design Notes
The 324-ball PBGA (23 x 23 mm) requires a minimum 8-layer PCB with via-in-pad or dog-bone fan-out on a 1.0 mm or finer ball pitch. Plan power and ground ball assignments to a dedicated internal power plane, and reserve outer layers for the wide address/data and peripheral buses. Specify X-ray inspection at contract manufacture, since BGA solder joints cannot be visually inspected. Follow NXP's package handling and reflow recommendations for organic-substrate PBGA packages to avoid warpage during lead-free reflow.
The device operates from 1.2 V (core), 3.3 V, and 5 V domains. Estimate: at 150 MHz, core current draw of tens to hundreds of milliamps on the 1.2 V rail is typical for this class - derive the exact figure from the manufacturer datasheet current-consumption tables for your clock configuration, and size the core regulator with at least 50% margin. Sequence the 1.2 V core rail relative to the 3.3/5 V I/O rails per the datasheet power-up requirements, and add local decoupling (100 nF per power ball group plus bulk 10 uF) close to each supply domain.
Common pitfalls with MPC564xA designs: (1) forgetting the flash programming/erase voltage requirements during in-application reprogramming, which can corrupt calibration sectors; (2) underestimating watchdog timing - the e200z4 core clock configuration must be validated before enabling the internal watchdog; (3) migrating code from MPC5632M without checking peripheral clock differences, since the SPC5642 runs at 150 MHz versus lower MPC5600 frequencies. Always run NXP's clock-configuration utility and validate flash retention across the full -40 to +105 degrees C range during qualification.
Compliance Information
Listed as Automotive Grade in distributor data (Mouser, DigiKey, Vyrian), implying automotive qualification; specific RoHS/REACH/lead-free declarations should be confirmed on the NXP product page compliance documents.
