Texas Instruments

TAS5616DKD - 300W Mono Class-D Amplifier | Texas Instruments

MPN: TAS5616DKD ✓ Active
25 V to 52.5 V Vdss 44-pin HSSOP with exposed pad Package
MOQ: 1 |

TAS5616DKD Overview

The Texas Instruments TAS5616DKD is a digital-input Class-D audio power amplifier with integrated PurePath HD feedback, designed for mono or stereo speaker drive. It supports 25 V to 52.5 V power-supply operation, 10.8 V to 13.2 V PWM logic supply operation, 160 W stereo output into 8-ohm loads, and up to 300 W mono output. The device is packaged in a 44-pin HSSOP power package with an exposed thermal pad.

A Class-D amplifier is a switching audio power stage in which the output transistor operates in a fully switching state. Its efficiency allows substantial audio power with lower conduction loss than a conventional linear amplifier. The TAS5616DKD is a high-performance PWM-input Class-D device with integrated closed-loop feedback, providing a practical solution for powered speakers, home-theater equipment, and compact high-power audio systems.

Key characteristics include a 44-pin HSSOP package, integrated closed-loop feedback, digital PWM input, support for mono or stereo operation, and a power-supply range of 25 V to 52.5 V. The device also accepts a separate 10.8 V to 13.2 V PWM supply, allowing the system designer to manage power-amplifier and logic-supply domains independently. The exposed thermal pad is central to heat removal at high output power.

The PurePath HD architecture uses integrated feedback to improve distortion and output-voltage behavior in the power stage. With an 80 kHz signal-bandwidth capability described for the device family, the amplifier is intended for high-fidelity audio reproduction rather than low-frequency-only subwoofer applications. The integrated feedback simplifies output-network design compared with systems that require external speaker feedback.

Typical uses include powered stereo speakers, compact home-theater amplifiers, professional audio equipment, soundbars, and high-power subwoofer amplifiers. In each case, the supply voltage, speaker impedance, thermal design, and output-filter requirements must be selected together. The 44-pin HSSOP package requires careful PCB layout and substantial thermal copper for reliable operation near its maximum output capability.

The main design consideration is heat management. Estimated power dissipation in the output stage changes with supply voltage, output voltage, load impedance, and output power. Use the exposed pad with a low-thermal-resistance PCB layout, validate amplifier temperature during maximum-power operation, and select decoupling and output filtering according to the manufacturer datasheet.

This product summary combines the electrical ratings, package information, application context, practical thermal guidance, and drop-in replacement considerations for engineers evaluating the TAS5616DKD in Class-D audio designs.

Drop-in alternatives for TAS5616DKD — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with TAS5616DKD (same form factor and footprint) — differing in Package, Channel Configuration, Input Type, Maximum Mono Output Power, Maximum Stereo Output Power.

Texas Instruments
Package: 44-pin HSSOP
Channel Configuration: 1-channel mono or 2-channel stereo
Input Type: Analog input
Compare with TAS5616DKD →
Texas Instruments
Package: 44-pin HTSSOP (DKD)
Channel Configuration: 1-channel (mono) or 2-channel (stereo)
Compare with TAS5616DKD →

TAS5631DKD

✅ Drop-In
Texas Instruments
📦 44-pin HSSOP with exposed pad
Class D audio power amplifier (PWM input) · 1-channel (mono) or 2-channel (stereo) · 300 W · 600 W · 25 V to 52.5 V · 10.8 V to 13.2 V · Integrated closed-loop feedback (PurePath HD) · < 0.03%

Contact for price

View Datasheet →

TAS5630DKD

✅ Drop-In
Texas Instruments
📦 44-pin HSSOP with exposed pad
Analog-input Class-D audio power amplifier · PurePath HD integrated closed-loop feedback · 300 W · 600 W · 4 Ω to 8 Ω · 1-channel mono or 2-channel stereo · 10.8 V to 13.2 V · 50 V

Contact for price

View Datasheet →

TAS5615DKD

✅ Drop-In ⚠️ Specs Unverified
Texas Instruments
📦 44-pin HSSOP with exposed pad
Analog-input Class-D audio power amplifier · 160 W into 8 ohms at 50 V supply · 300 W · <0.03% THD · 25 V to 52.5 V · 10.8 V to 13.2 V · 50 V · 1-channel mono or 2-channel stereo

Contact for price

View Datasheet →

TAS5614DKD

✅ Drop-In ⚠️ Specs Unverified
📦 44-pin HSSOP with exposed pad
Same-brand DKD package in the related power-stage family; rated output and electrical characteristics may differ

📋 Reference alternative (not in catalog)

TAS5613DKD

✅ Drop-In ⚠️ Specs Unverified
📦 44-pin HSSOP with exposed pad
Same-brand DKD package and closely related Class-D architecture; power rating and pin behavior require confirmation

📋 Reference alternative (not in catalog)

TAS5616DKD Maximum Ratings & Electrical Characteristics

Product Type PWM-input Class-D audio power amplifier
Manufacturer Texas Instruments
Output Configuration 1-channel mono or 2-channel stereo
Maximum Stereo Output Power 160 W
Maximum Mono Output Power 300 W
Power-Supply Voltage Range 25 V to 52.5 V
PWM Logic Supply Voltage Range 10.8 V to 13.2 V
Feedback Architecture PurePath HD integrated closed-loop feedback
Signal Bandwidth Up to 80 kHz
Package 44-pin HSSOP with exposed pad
Package / Case 44-BSSOP, 11.00 mm width
Mounting Type Surface mount
Packaging Tube
Input Type Digital PWM input

TAS5616DKD 44-bssop, 11.00 mm width Pin Configuration Guide

Pin configuration for TAS5616DKD (44-bssop, 11.00 mm width package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

44-bssop, 11.00 mm width package pinout diagram for TAS5616DKD

No detailed pinout data available for TAS5616DKD.

Refer to the datasheet for full pin configuration.

Typical Applications

TAS5616DKD is suitable for 6 applications: Powered Stereo Speaker, High-Power Subwoofer Amplifier, Home-Theater Power Amplifier, Professional Audio Speaker, Soundbar, Digital Audio Power Module.

🎧

Powered Stereo Speaker

The TAS5616DKD fits a powered stereo-speaker power stage because it supports 160 W per channel into 8-ohm loads from a 50 V supply. Its digital PWM input allows the amplifier to be placed downstream of a digital audio processor or DAC, while PurePath HD integrated feedback supports the Class-D output architecture. The design must provide the specified 25 V to 52.5 V main rail and 10.8 V to 13.2 V PWM rail. For continuous high-level playback, the exposed thermal pad should be connected to a generous copper area and the finished amplifier should be tested at worst-case ambient temperature.

🔊

High-Power Subwoofer Amplifier

For a high-power subwoofer amplifier, the TAS5616DKD can operate in mono configuration with up to 300 W output capability. Its 25 V to 52.5 V power-supply range provides headroom for a conventional high-voltage audio power stage, while integrated feedback simplifies implementation of the closed-loop amplifier topology. The system still needs speaker-appropriate output filtering, DC blocking, thermal monitoring, and protection against overload or short circuits. Continuous output capability depends on amplifier efficiency and PCB heat dissipation, so validate the enclosure temperature and exposed-pad thermal path during development.

📺

Home-Theater Power Amplifier

The TAS5616DKD can form the output stage of a compact home-theater power amplifier using its 160 W stereo capability. A digital-audio receiver or soundbar processor can supply the PWM input, avoiding a conventional analog input stage close to the power devices. The up-to-80-kHz signal bandwidth supports high-frequency audio content, while PurePath HD feedback provides the core error-correction function for the switching output. Careful partitioning of logic and power supplies is important because the device requires both a high-voltage main rail and a 10.8 V to 13.2 V PWM supply.

🎚️

Professional Audio Speaker

The TAS5616DKD is suitable for a professional powered-speaker design requiring high output power and an integrated digital power stage. Its 44-pin HSSOP package with exposed pad supports compact construction, but industrial or touring applications require conservative thermal margins because sustained acoustic output can keep the semiconductor near its maximum dissipation. PurePath HD feedback helps maintain the Class-D power stage behavior, and the wide signal bandwidth is suitable for full-range audio reproduction. The amplifier should be paired with suitable protection, balanced input circuitry, filtering, and an enclosure designed to move heat away from the package.

📱

Soundbar

A soundbar benefits from the TAS5616DKD when the product uses a digital audio pipeline and requires several amplified channels in limited space. The device supports either stereo operation for left and right channels or mono operation for a subwoofer or center channel. Its 25 V to 52.5 V supply range must be reconciled with the soundbar power-supply architecture, while the 10.8 V to 13.2 V PWM supply can support logic-domain integration. Compact construction makes thermal layout especially important: route the exposed pad into a broad ground and copper region, minimize thermal bottlenecks, and verify sustained output in the final enclosure.

🖥️

Digital Audio Power Module

The TAS5616DKD can be used as the output element of a modular digital-audio power converter when the source provides compatible PWM signals. This architecture is useful in active speakers and multi-channel audio systems where digital processing is performed before the power stage. The integrated PurePath HD feedback supports the internal Class-D control loop, while the separate main and PWM supply ranges provide defined power-domain boundaries. A successful module design must include input timing compatibility, suitable speaker filters, stable supply sequencing, overcurrent protection, and a thermal design based on the maximum expected channel load rather than nominal music power.

What is the TAS5616DKD?
The TAS5616DKD is a Texas Instruments PWM-input Class-D audio power amplifier with PurePath HD integrated feedback. It supports mono or stereo output, including up to 160 W stereo into 8 ohms from a 50 V supply and up to 300 W mono operation. Its 44-pin HSSOP package includes an exposed thermal pad for heat removal. According to the manufacturer datasheet, the device operates from a 25 V to 52.5 V power supply.
What is the operating voltage of TAS5616DKD?
The TAS5616DKD uses a 25 V to 52.5 V main power supply and a separate 10.8 V to 13.2 V PWM logic supply. These domains should be decoupled and routed according to the manufacturer datasheet. The 50 V supply condition is specifically associated with the 160 W stereo output rating into 8-ohm speakers. Confirm both supply ranges against the complete electrical-characteristics table before releasing the power design.
How much power can TAS5616DKD deliver?
The TAS5616DKD can deliver up to 160 W per channel in stereo operation and up to 300 W in mono operation. The 160 W stereo rating is tied to an 8-ohm load and a 50 V supply according to the manufacturer datasheet. Actual thermal and current limits can reduce sustainable output, so the PCB thermal design and speaker impedance must support the intended operating condition.
Where can I download the TAS5616DKD datasheet PDF?
The TAS5616DKD datasheet PDF is available from the listed document links, including the Texas Instruments document mirror at alldatasheet.com. The document describes the 160 W stereo and 300 W mono PurePath HD digital-input power stage, its supply requirements, and its 44-BSSOP package. Use the manufacturer datasheet as the controlling reference for pin assignments, thermal limits, filtering, and application-circuit values.
Where can I find the TAS5616DKD pinout?
The TAS5616DKD pin assignments are shown in the pin-configuration section of the manufacturer datasheet. The component uses a 44-BSSOP HSSOP package with an exposed thermal pad, and the exposed pad must be connected to the board's thermal and ground structure as directed. This page does not reproduce the complete pin table; assign PCB tracks from the numbered package drawing and pin-description table before layout release.
What is PurePath HD in the TAS5616DKD?
PurePath HD is the integrated closed-loop feedback technology used by the TAS5616DKD power stage. The manufacturer describes the device as a high-performance PWM-input Class-D amplifier using this feedback arrangement. Integrated feedback helps the system implement the output stage with fewer external feedback components. Signal bandwidth extends to 80 kHz for the device family, supporting high-frequency audio reproduction.
TAS5616DKD vs TAS5631DKD: which is better for a powered speaker?
The TAS5616DKD and TAS5631DKD are closely related Texas Instruments Class-D power stages in the same DKD package family, but their detailed electrical limits must be checked before substitution. The TAS5616DKD is rated for up to 160 W stereo or 300 W mono operation. Choose it when its supply range, thermal limits, and output rating match the powered-speaker design. Validate pin functions and thermal performance against each manufacturer datasheet.
TAS5616DKD vs TAS5630DKD: which is better for a subwoofer amplifier?
The TAS5616DKD is the appropriate starting point when the design requires the stated 300 W mono capability and a 25 V to 52.5 V power-supply range. TAS5630DKD may offer a different output-power and thermal envelope, so its voltage, current, feedback, and protection ratings must be compared with the TAS5616DKD. Neither device should be selected solely by package appearance; verify every electrical limit in the respective datasheet.
When should I choose TAS5616DKD over TAS5615PHDR?
Choose the TAS5616DKD when the design requires the 44-pin DKD HSSOP footprint and the TAS5616 power-stage ratings. The TAS5615PHDR uses a different PHDR package and therefore is not a same-footprint drop-in replacement for an existing TAS5616DKD layout. The choice may still be appropriate during a new design if the PHDR package offers a better thermal or assembly solution, but the PCB and thermal strategy would need separate evaluation.
Is TAS5616DKD suitable for a high-power subwoofer?
Yes, the TAS5616DKD can support a high-power subwoofer amplifier when configured for its rated mono output and paired with a suitable speaker load. Its rated capability reaches 300 W mono, while the main supply range is 25 V to 52.5 V. Thermal design, output filtering, DC blocking, speaker protection, and the exact power-limit conditions must be addressed in the system design and validated against the manufacturer datasheet.
What can replace TAS5616DKD?
A direct replacement must preserve the 44-pin DKD footprint, pin functions, supply requirements, PWM input arrangement, feedback architecture, and power ratings. TAS5631DKD and TAS5630DKD are the closest same-brand options identified for evaluation, while same-family DKD variants may also be considered after datasheet review. A substitute should not be treated as interchangeable until its electrical limits, thermal data, and application circuit have been compared.
Is TAS5616DKD the same as TAS5631DKD?
No. The TAS5616DKD and TAS5631DKD belong to a related Class-D power-amplifier family and use the same DKD package designation, but they are not necessarily identical in every rating or function. The TAS5616DKD is specified for 160 W stereo or 300 W mono operation and a 25 V to 52.5 V supply. Check output power, current limits, thermal data, pin behavior, and application requirements before using one in place of the other.
What are the key specifications of TAS5616DKD that engineers should know?
The key TAS5616DKD specifications are 160 W stereo output, up to 300 W mono output, a 25 V to 52.5 V main supply, a 10.8 V to 13.2 V PWM logic supply, PurePath HD integrated feedback, up to 80 kHz signal bandwidth, and a 44-pin HSSOP package with an exposed pad. These ratings define the core power-amplifier architecture, but thermal dissipation and PCB copper area remain critical at high continuous output.
How should the TAS5616DKD be handled for thermal reliability?
The TAS5616DKD should use the exposed thermal pad with a low-thermal-resistance PCB layout. Estimated heat generation equals amplifier dissipation derived from the actual supply voltage, output voltage, load, and output power; those values should be validated during worst-case testing. Use substantial copper around the package and follow the manufacturer datasheet for thermal-pad connection and layout. Continuous full-power operation should not rely on the small PCB area alone.
Where can I request a quote for TAS5616DKD?
Use the Request a Quote form on this page to ask about TAS5616DKD availability, current pricing, minimum order quantity, and lead time. The form is the appropriate commercial channel for quote-based purchasing and supply confirmation. A complete quote request should include the target quantity, tube packaging requirement, delivery location, and any required traceability or production documentation.

Engineering reference data for TAS5616DKD — comparison, design guidance, and compliance information.

Selection Guide

Choose the TAS5616DKD for a new or existing DKD-layout design that needs a PWM-input Class-D stage rated for 160 W stereo or up to 300 W mono operation, with a 25 V to 52.5 V main supply. It is particularly attractive when the audio system already produces digital PWM signals and needs PurePath HD integrated feedback. TAS5631DKD is a close same-brand DKD-family candidate for evaluation, especially when its output ratings and protection behavior better fit the target product. TAS5630DKD may be preferable if its electrical and thermal characteristics align with a different amplifier configuration, but the rated power envelope must be compared. The same-family TAS5615DKD, TAS5614DKD, and TAS5613DKD options require careful review of output power, supply range, pin behavior, and application circuits. For any substitution, preserve the 44-pin HSSOP footprint, exposed-pad thermal design, supply sequencing, feedback network, output filtering, and protection scheme.

Comparison with Alternatives

Parameter This Product TAS5631DKD TAS5630DKD TAS5615DKD TAS5614DKD TAS5613DKD
Package 44-pin HSSOP with exposed pad 44-pin HSSOP with exposed pad 44-pin HSSOP with exposed pad 44-pin HSSOP with exposed pad 44-pin HSSOP with exposed pad 44-pin HSSOP with exposed pad
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Amplifier Type PWM-input Class-D Class-D power stage Class-D power stage Class-D power stage Class-D power stage Class-D power stage

Key Differentiators

  • High integrated mono-output capability (vs TAS5630DKD)
  • High stereo-output rating in a DKD power package (vs TAS5631DKD)
  • Documented PurePath HD feedback and wide signal bandwidth (vs TAS5615DKD)

Design Notes

Use the exposed thermal pad as the primary heat path. Estimated amplifier dissipation is derived from the selected supply voltage, output voltage, load impedance, and output power; confirm the resulting junction temperature with the manufacturer thermal model. Provide uninterrupted ground and copper beneath and around the package, follow the datasheet land pattern, and avoid narrow thermal bottlenecks. Validate sustained full-power operation in the final enclosure because a PCB that works in open air can overheat inside a confined cabinet.

Keep the high-current power-supply and speaker-output paths compact and use copper widths and planes appropriate for the intended output current. Place input, PWM, feedback, and supply decoupling components close to their associated pins, with the shortest possible return paths. Route sensitive PWM and feedback nets away from switching-node copper. The 44-pin HSSOP package requires careful sequencing of via placement and thermal-via arrays so that electrical connectivity and heat removal are both achieved.

Do not treat the 160 W stereo and 300 W mono figures as guarantees independent of load, supply voltage, temperature, and thermal design. Confirm output-current limits, speaker impedance, minimum load, PWM signal levels, supply sequencing, and filter requirements in the manufacturer datasheet. Add speaker and amplifier protection appropriate to the application. A replacement is only drop-in after every numbered pin, supply rail, feedback connection, and thermal condition has been verified.

Class-D output stages create high-frequency switching energy even though the audio input is wideband. Use the manufacturer-recommended output filter, keep switching nodes compact, and maintain a low-impedance return for the power stage. Filter placement should balance phase margin, speaker safety, and attenuation of switching components. EMI performance depends strongly on the complete PCB and enclosure, so evaluate the assembled design with representative cables and speaker loads rather than relying only on component-level measurements.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

Compliance attributes require confirmation from the manufacturer product page or current material declaration.

Data verified on: 2026-11-10 — data verified and curated by XAIPART's component engineering team

Related Searches

TAS5616DKD datasheet TAS5616DKD pinout TAS5616DKD datasheet pdf Texas Instruments TAS5616DKD TAS5616DKD 300W amplifier TAS5616DKD 44 HSSOP TAS5616DKD powered speaker TAS5616DKD subwoofer amplifier TAS5616DKD vs TAS5631DKD TAS5616DKD drop-in replacement TAS5616DKD equivalent TAS5616DKD price

Related Components & Terms

Texas Instruments TAS5616DKD TAS5631DKD TAS5630DKD TAS5615DKD TAS5614DKD TAS5613DKD Class-D amplifier audio power amplifier digital-input power stage PWM input PurePath HD integrated closed-loop feedback signal bandwidth output power power-supply rejection speaker impedance 44-pin HSSOP 44-BSSOP exposed thermal pad surface-mount package powered stereo speaker subwoofer amplifier home-theater amplifier RoHS
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details