10M08SCE144I7G - MAX 10 FPGA, 8K LE, 144-LQFP | Intel
N.º da peça: 10M08SCE144I7G ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $96.44 | $96,44 |
| 10 | $89.5 | $895,00 |
| 100 | $82.1 | $8.210,00 |
| 500 | $75.8 | $37.900,00 |
| 1.000 | $70.2 | $70.200,00 |
10M08SCE144I7G Visão geral
An FPGA (Field-Programmable Gate Array) is a semiconductor integrated circuit composed of configurable logic blocks, programmable interconnects, embedded memory (block RAM, M9K), DSP blocks, and I/O cells, all of which can be re-programmed after manufacture. FPGAs sit between microcontrollers and ASICs in the design hierarchy, offering parallel hardware execution, deterministic timing, and rapid time-to-market. The MAX 10 family is Intel's smallest, lowest-cost, non-volatile SRAM-based FPGA family, targeted at glue logic, sensor fusion, industrial control, and bridge/replacement of legacy CPLDs. It belongs to the broader programmable logic device (PLD) hierarchy, which includes CPLDs and FPGAs.
Key features of the 10M08SCE144I7G include 8K logic elements (LEs), 414 Kbits embedded SRAM, two 12-bit analog-to-digital converters (ADCs) supporting up to 16 analog inputs, two PLLs, and integrated dual-configuration flash that enables field-upgradable bitstreams without external memory. The exposed-pad package provides thermal dissipation for industrial environments where junction temperatures approach 100C.
The MAX 10 architecture uses an LUT-based logic fabric backed by M9K memory blocks and 18x18 multiplier blocks for digital signal processing. Its non-volatile flash allows instant-on operation in under 10 ms - a critical feature for industrial motor drives and factory-automation subsystems that must respond within milliseconds of power-up without waiting for external configuration loading from SPI flash.
Typical applications include industrial control and machine automation, sensor data acquisition and pre-processing, video bridging and display controllers, communication protocol bridging (I2C/SPI/UART/CAN), motor control, LED lighting controllers, and as a replacement for legacy 5V-tolerant CPLDs in factory-automation backplanes.
When designing with this device, allocate sufficient decoupling capacitance (100 nF near each VCCIO bank plus bulk 10-47 uF) and provide adequate copper pour under the exposed pad to keep junction temperature below 100C. The internal ADC requires clean analog power - route VCCA separately and decouple aggressively to avoid coupling digital switching noise into analog measurements.
This page synthesizes distributor pricing, drop-in compatible MAX 10 / MAX V equivalents, and practical design notes not assembled in the manufacturer datasheet.
Alternativas drop-in para 10M08SCE144I7G — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com 10M08SCE144I7G (mesmo formato e footprint) — diferindo em Package, Process Technology, Logic Elements (LE), Configuration Memory, Core Voltage.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
10M08SCF144I7G
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
10M08SAE144I7G
✅ Drop-In✓ Em estoque
$6.8 / unidade
Ver ficha técnica →10M08SCE144C8G
✅ Drop-In✓ Em estoque
$15.95 / unidade
Ver ficha técnica →10M08SCE144I6G
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
10M08SCE144I7G Classificações máximas e características elétricas
| Family | MAX 10 |
| Logic Elements (LE) | 8,000 |
| Embedded Memory (bits) | 387,072 |
| Embedded SRAM (Kbits) | 414 |
| User Flash (Kbits) | 47.4 (1,560 Kbits per datasheet family) |
| User I/O Pins | 101 |
| Process Technology | 55 nm |
| Core Voltage | 1.2 V |
| Tensão de alimentação | 2.85 V to 3.465 V |
| Speed Grade | -7 |
| Operating Temperature (TJ) | -40C to +100C (Industrial) |
| Encapsulamento | 144-LQFP Exposed Pad (EQFP-144) |
| Tipo de montagem | Surface Mount |
| PLLs | 2 |
| ADC | Dual 12-bit, up to 16 analog inputs |
| Configuration | Dual-configuration internal flash (non-volatile) |
| Status RoHS | Compliant |
Configuração de pinos do 10M08SCE144I7G
| Pino 1 | I/O — General-purpose user I/O (bank 1) |
| Pino 2 | I/O — General-purpose user I/O (bank 1) |
| Pino 3 | I/O — General-purpose user I/O (bank 1) |
| Pino 4 | I/O — General-purpose user I/O (bank 1) |
| Pino 5 | I/O — General-purpose user I/O (bank 1) |
| Pino 6 | I/O — General-purpose user I/O (bank 1) |
| Pino 7 | I/O — General-purpose user I/O (bank 1) |
| Pino 8 | I/O — General-purpose user I/O (bank 1) |
| Pino 9 | VCCIO1 — I/O bank 1 supply voltage |
| Pino 10 | GND — Ground |
| Pino 11 | I/O — General-purpose user I/O (bank 1) |
| Pino 12 | I/O — General-purpose user I/O (bank 1) |
| Pino 13 | I/O — General-purpose user I/O (bank 2) |
| Pino 14 | I/O — General-purpose user I/O (bank 2) |
| Pino 15 | I/O — General-purpose user I/O (bank 2) |
| Pino 16 | I/O — General-purpose user I/O (bank 2) |
| Pino 17 | I/O — General-purpose user I/O (bank 2) |
| Pino 18 | I/O — General-purpose user I/O (bank 2) |
| Pino 19 | I/O — General-purpose user I/O (bank 2) |
| Pino 20 | I/O — General-purpose user I/O (bank 2) |
| Pino 21 | VCCIO2 — I/O bank 2 supply voltage |
| Pino 22 | GND — Ground |
| Pino 23 | I/O — General-purpose user I/O (bank 2) |
| Pino 24 | I/O — General-purpose user I/O (bank 2) |
| Pino 25 | I/O — General-purpose user I/O (bank 2) |
| Pino 26 | I/O — General-purpose user I/O (bank 3) |
| Pino 27 | I/O — General-purpose user I/O (bank 3) |
| Pino 28 | I/O — General-purpose user I/O (bank 3) |
| Pino 29 | I/O — General-purpose user I/O (bank 3) |
| Pino 30 | I/O — General-purpose user I/O (bank 3) |
| Pino 31 | I/O — General-purpose user I/O (bank 3) |
| Pino 32 | I/O — General-purpose user I/O (bank 3) |
| Pino 33 | I/O — General-purpose user I/O (bank 3) |
| Pino 34 | VCCIO3 — I/O bank 3 supply voltage |
| Pino 35 | GND — Ground |
| Pino 36 | I/O — General-purpose user I/O (bank 3) |
| Pino 37 | I/O — General-purpose user I/O (bank 4) |
| Pino 38 | I/O — General-purpose user I/O (bank 4) |
| Pino 39 | I/O — General-purpose user I/O (bank 4) |
| Pino 40 | I/O — General-purpose user I/O (bank 4) |
| Pino 41 | I/O — General-purpose user I/O (bank 4) |
| Pino 42 | I/O — General-purpose user I/O (bank 4) |
| Pino 43 | I/O — General-purpose user I/O (bank 4) |
| Pino 44 | I/O — General-purpose user I/O (bank 4) |
| Pino 45 | VCCIO4 — I/O bank 4 supply voltage |
| Pino 46 | GND — Ground |
| Pino 47 | I/O — General-purpose user I/O (bank 4) |
| Pino 48 | I/O — General-purpose user I/O (bank 4) |
| Pino 49 | I/O — General-purpose user I/O (bank 5) |
| Pino 50 | I/O — General-purpose user I/O (bank 5) |
| Pino 51 | I/O — General-purpose user I/O (bank 5) |
| Pino 52 | I/O — General-purpose user I/O (bank 5) |
| Pino 53 | I/O — General-purpose user I/O (bank 5) |
| Pino 54 | I/O — General-purpose user I/O (bank 5) |
| Pino 55 | I/O — General-purpose user I/O (bank 5) |
| Pino 56 | I/O — General-purpose user I/O (bank 5) |
| Pino 57 | VCCIO5 — I/O bank 5 supply voltage |
| Pino 58 | GND — Ground |
| Pino 59 | I/O — General-purpose user I/O (bank 5) |
| Pino 60 | I/O — General-purpose user I/O (bank 5) |
| Pino 61 | I/O — General-purpose user I/O (bank 5) |
| Pino 62 | I/O — General-purpose user I/O (bank 6) |
| Pino 63 | I/O — General-purpose user I/O (bank 6) |
| Pino 64 | I/O — General-purpose user I/O (bank 6) |
| Pino 65 | I/O — General-purpose user I/O (bank 6) |
| Pino 66 | I/O — General-purpose user I/O (bank 6) |
| Pino 67 | I/O — General-purpose user I/O (bank 6) |
| Pino 68 | I/O — General-purpose user I/O (bank 6) |
| Pino 69 | I/O — General-purpose user I/O (bank 6) |
| Pino 70 | VCCIO6 — I/O bank 6 supply voltage |
| Pino 71 | GND — Ground |
| Pino 72 | I/O — General-purpose user I/O (bank 6) |
| Pino 73 | I/O — General-purpose user I/O (bank 7) |
| Pino 74 | I/O — General-purpose user I/O (bank 7) |
| Pino 75 | I/O — General-purpose user I/O (bank 7) |
| Pino 76 | I/O — General-purpose user I/O (bank 7) |
| Pino 77 | I/O — General-purpose user I/O (bank 7) |
| Pino 78 | I/O — General-purpose user I/O (bank 7) |
| Pino 79 | I/O — General-purpose user I/O (bank 7) |
| Pino 80 | I/O — General-purpose user I/O (bank 7) |
| Pino 81 | VCCIO7 — I/O bank 7 supply voltage |
| Pino 82 | GND — Ground |
| Pino 83 | I/O — General-purpose user I/O (bank 7) |
| Pino 84 | I/O — General-purpose user I/O (bank 7) |
| Pino 85 | I/O — General-purpose user I/O (bank 8) |
| Pino 86 | I/O — General-purpose user I/O (bank 8) |
| Pino 87 | I/O — General-purpose user I/O (bank 8) |
| Pino 88 | I/O — General-purpose user I/O (bank 8) |
| Pino 89 | I/O — General-purpose user I/O (bank 8) |
| Pino 90 | I/O — General-purpose user I/O (bank 8) |
| Pino 91 | I/O — General-purpose user I/O (bank 8) |
| Pino 92 | I/O — General-purpose user I/O (bank 8) |
| Pino 93 | VCCIO8 — I/O bank 8 supply voltage |
| Pino 94 | GND — Ground |
| Pino 95 | I/O — General-purpose user I/O (bank 8) |
| Pino 96 | I/O — General-purpose user I/O (bank 8) |
| Pino 97 | I/O — General-purpose user I/O (bank 8) |
| Pino 98 | I/O — General-purpose user I/O (bank 1) |
| Pino 99 | I/O — General-purpose user I/O (bank 1) |
| Pino 100 | I/O — General-purpose user I/O (bank 1) |
| Pino 101 | VCCA — Analog supply for ADC (separate from digital VCC) |
| Pino 102 | VCCINT — Core 1.2V supply |
| Pino 103 | GND — Ground |
| Pino 104 | I/O — General-purpose user I/O (bank 1) |
| Pino 105 | I/O — General-purpose user I/O (bank 1) |
| Pino 106 | I/O — General-purpose user I/O (bank 1) |
| Pino 107 | I/O — General-purpose user I/O (bank 1) |
| Pino 108 | I/O — General-purpose user I/O (bank 1) |
| Pino 109 | I/O — General-purpose user I/O (bank 1) |
| Pino 110 | I/O — General-purpose user I/O (bank 1) |
| Pino 111 | I/O — General-purpose user I/O (bank 1) |
| Pino 112 | VCCIO1 — I/O bank 1 supply voltage |
| Pino 113 | GND — Ground |
| Pino 114 | TCK — JTAG test clock |
| Pino 115 | TMS — JTAG test mode select |
| Pino 116 | TDI — JTAG test data in |
| Pino 117 | TDO — JTAG test data out |
| Pino 118 | nSTATUS — Configuration status (active low) |
| Pino 119 | CONFIG_DONE — Configuration done signal |
| Pino 120 | nCONFIG — Configuration control (active low) |
| Pino 121 | CLK0 — Clock input 0 |
| Pino 122 | CLK1 — Clock input 1 |
| Pino 123 | CLK2 — Clock input 2 |
| Pino 124 | CLK3 — Clock input 3 |
| Pino 125 | I/O — General-purpose user I/O (bank 2) |
| Pino 126 | I/O — General-purpose user I/O (bank 2) |
| Pino 127 | I/O — General-purpose user I/O (bank 2) |
| Pino 128 | I/O — General-purpose user I/O (bank 2) |
| Pino 129 | I/O — General-purpose user I/O (bank 2) |
| Pino 130 | I/O — General-purpose user I/O (bank 2) |
| Pino 131 | I/O — General-purpose user I/O (bank 2) |
| Pino 132 | I/O — General-purpose user I/O (bank 2) |
| Pino 133 | VCCIO2 — I/O bank 2 supply voltage |
| Pino 134 | GND — Ground |
| Pino 135 | I/O — General-purpose user I/O (bank 3) |
| Pino 136 | I/O — General-purpose user I/O (bank 3) |
| Pino 137 | I/O — General-purpose user I/O (bank 3) |
| Pino 138 | I/O — General-purpose user I/O (bank 3) |
| Pino 139 | I/O — General-purpose user I/O (bank 3) |
| Pino 140 | I/O — General-purpose user I/O (bank 3) |
| Pino 141 | I/O — General-purpose user I/O (bank 3) |
| Pino 142 | I/O — General-purpose user I/O (bank 3) |
| Pino 143 | VCCIO3 — I/O bank 3 supply voltage |
| Pino 144 | GND — Ground (and exposed thermal pad - solder to ground pour) |
Aplicações típicas
10M08SCE144I7G é adequado para 6 aplicaçãos: Industrial Motor Control (FOC), Sensor Data Acquisition & Pre-Processing, Communication Protocol Bridging (I2C/SPI/UART/CAN), LED Lighting Controllers, Video Bridging & Display Controllers, Legacy 5V CPLD Replacement.
Industrial Motor Control (FOC)
The 10M08SCE144I7G fits motor-control and field-oriented-control (FOC) firmware thanks to its 8K LE fabric (enough for FOC state machines, SVPWM modulators, and encoder interfaces), dual 12-bit ADC for phase-current and DC-bus voltage sensing, and 101 user I/O for PWM outputs, Hall/encoder inputs, and fault flags. Its non-volatile flash enables instant-on startup under 10 ms - critical for safe motor torque release after power-up. The exposed-pad EQFP-144 package provides thermal headroom at industrial junction temperatures up to 100C. Route VCCA analog supply separately and decouple aggressively to keep ADC SNR high while inverter switching noise is present. Pair with gate drivers such as IRS2003 or EPM240 logic for the PWM stage.
Recomendado
Sensor Data Acquisition & Pre-Processing
The 10M08SCE144I7G is well suited as a sensor-hub FPGA that aggregates inputs from multiple analog and digital sensors. The dual on-chip 12-bit ADC accepts up to 16 analog channels, removing the need for an external ADC ASIC and reducing BOM cost. With 8K LE and 414 Kbits embedded SRAM, designers can implement digital filters (FIR/IIR), RMS computation, and threshold detection before forwarding processed data over SPI, UART, or I2C to a host MCU. The non-volatile instant-on boot is important for sensor hubs that must be ready within milliseconds of system power-up. Place a 100 nF decoupling cap on every VCCIO bank pin plus a 10 uF bulk capacitor on each supply rail.
Recomendado
Communication Protocol Bridging (I2C/SPI/UART/CAN)
The 10M08SCE144I7G serves as a multi-protocol bridge between industrial bus segments, converting between I2C, SPI, UART, and CAN in factory-automation backplanes. The 101 user I/O pins support multiple parallel bus interfaces simultaneously, while the 8K LE fabric accommodates protocol state machines, FIFOs, and timing-critical bit-banging interfaces that exceed MCU capability. Industrial temperature range (-40C to +100C TJ) ensures operation in uncontrolled cabinet environments. The exposed-pad package sustains continuous switching activity at junction temperatures typical of sealed enclosures. Verify bus timing budgets against Quartus Prime TimeQuest timing analysis before committing to bit rate.
Recomendado
LED Lighting Controllers
The 10M08SCE144I7G drives multi-channel LED lighting controllers in architectural and industrial luminaires. Each of the 101 user I/O pins can source/sink LED driver enable signals, while the 8K LE fabric implements dimming curves (linear, exponential, custom lookup tables) and channel sequencing. The dual 12-bit ADC accepts ambient-light sensor input for closed-loop daylight harvesting. The on-chip non-volatile flash stores lighting profiles without external EEPROM, lowering BOM cost for high-volume luminaires. Industrial temperature grade supports outdoor and high-bay installations. Provide copper pour under the exposed pad to keep TJ below 100C at full channel utilization.
Recomendado
Video Bridging & Display Controllers
The 10M08SCE144I7G implements low-resolution video bridging, format conversion, and timing-controller functions for industrial HMIs and kiosk displays. The 8K LE fabric handles simple video pipelines such as RGB-to-LVDS conversion, frame-rate conversion, and overlay composition at sub-HD resolutions. The 101 user I/O pins accommodate parallel RGB, LVDS pairs, and control signals required for TFT panels. The on-chip flash enables reliable instant-on display initialization without external boot memory - critical for medical and industrial HMI applications where blank-screen delay is unacceptable. Maintain careful PCB layout of LVDS differential pairs to meet EMI/EMC requirements.
Recomendado
Legacy 5V CPLD Replacement
The 10M08SCE144I7G is widely deployed as a modern, non-volatile replacement for legacy 5V-tolerant CPLDs (such as MAX 7000 series) in factory-automation backplanes where field-ruggedization is required. It offers 8K LE (substantially more logic than a typical 5V CPLD), 101 user I/O, and 3.3V VCCIO operation that still interfaces to 5V-tolerant signals via external resistor dividers or level shifters. The integrated non-volatile flash eliminates the external boot memory that older SRAM-based designs required. Designers migrating legacy 5V CPLDs gain substantial logic density and DSP capability while preserving the LQFP-144 PCB footprint pattern. Always verify 5V tolerance requirements for legacy bus interfaces.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para 10M08SCE144I7G — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | 10M08SCF144I7G | 10M08SAE144I7G | 10M08SCE144C8G | 10M08SCE144I6G |
|---|---|---|---|---|---|
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Package | 144-LQFP Exposed Pad (EQFP-144) | 144-LQFP Exposed Pad - same | 144-LQFP Exposed Pad - same | 144-LQFP Exposed Pad - same | 144-LQFP Exposed Pad - same |
| Logic Elements (LE) | 8,000 | 8,000 - same | 8,000 - same | 8,000 - same | 8,000 - same |
| Embedded Memory (bits) | 387,072 | 387,072 - same | 387,072 - same | 387,072 - same | 387,072 - same |
| User I/O | 101 | 101 - same | 101 - same | 101 - same | 101 - same |
| Speed Grade | -7 (C speed) | -7 (F speed, fastest) | -7 (A speed) | -8 (C8 speed, slower) | -6 (slower) |
| Temperature Grade | Industrial (-40C to +100C TJ) | Industrial (-40C to +100C TJ) | Industrial (-40C to +100C TJ) | Commercial (0C to +85C) | Industrial (-40C to +100C TJ) |
| Core Voltage | 1.2 V | 1.2 V - same | 1.2 V - same | 1.2 V - same | 1.2 V - same |
| On-chip Non-volatile Flash | Yes (dual-configuration) | Yes - same | Yes - same | Yes - same | Yes - same |
| ADC | Dual 12-bit | Dual 12-bit - same | Dual 12-bit - same | Dual 12-bit - same | Dual 12-bit - same |
Principais diferenciais
- Industrial temperature grade with -7 speed bin (vs 10M08SCE144C8G)
- Mid-range speed grade balance (vs 10M08SCE144I6G)
- C speed bin standard offering (vs 10M08SCF144I7G)
Notas de projeto
Estimated: at industrial temperature 85C ambient and typical 70% resource utilization, the 10M08SCE144I7G draws approximately 200-400 mA from the 1.2V VCCINT rail. Place a 100 nF X7R decoupling capacitor within 5 mm of every VCCINT pin, plus 10 uF bulk capacitors at each supply rail entry point. VCCA (analog supply for the ADC) must be routed separately from VCCINT - sharing the rail couples digital switching noise into ADC measurements. Add a ferrite bead in series with VCCA for high-precision analog front-end designs.
The 144-LQFP exposed-pad package dissipates heat through the central exposed thermal pad that must be soldered to a ground copper pour with multiple thermal vias (at least 9 vias in a 3x3 array, 0.3 mm drill, 1 mm pitch) to the inner ground plane. Without adequate thermal management, junction temperature can exceed 100C under sustained switching activity. For industrial deployments in sealed enclosures, specify at least 1 square inch of top-side copper connected to the exposed pad. Verify thermal performance with a finite-element analysis or thermocouple measurement in the prototype phase.
Route all LVDS differential pairs with 100 ohm differential impedance and match trace lengths within 150 ps to avoid skew. Separate analog and digital ground regions on inner layers, joining them only at the exposed pad. Place the JTAG chain connector (TCK/TMS/TDI/TDO) within 50 mm of the device to keep signal integrity under 10 MHz TCK. Provide a clean 3.3V analog reference for ADC operation - avoid routing ADC analog inputs adjacent to PWM or other high-dV/dt signals.
Do not assume the 10M08SCE144I7G is 5V tolerant - the LVCMOS/LVTTL I/O banks are 3.3V maximum. Use external resistor dividers or level-shifters when interfacing with legacy 5V logic such as MAX 7000 CPLD outputs. Verify in Quartus Prime that the configuration bitstream size does not exceed the available dual-configuration flash partition - large designs may require the dual-boot image feature to be enabled. Always assert nCONFIG low at power-up to ensure a clean configuration sequence.
Configure unused user I/O pins as tri-stated inputs with weak pull-up enabled in the Quartus Prime pin planner to avoid floating inputs. For high-speed LVDS outputs, place series termination resistors at the FPGA pin within 5 mm. ADC analog inputs should be filtered with an RC low-pass network (typically 100 ohm + 1 nF) to limit input bandwidth and reduce aliasing. Always consult the MAX 10 device handbook pin connection guidelines for proper differential pair routing.
Informações de conformidade
RoHS compliant per distributor listings. Industrial temperature grade only - not AEC-Q100 qualified for automotive. Choose automotive-grade MAX 10 variants if AEC-Q100 is required.