5CSEBA2U19C8N - Cyclone V SE SoC FPGA 25K LE Dual ARM Cortex-A9
N.º da peça: 5CSEBA2U19C8N ✓ Ativo| Qtd. | Preço unitário | Total |
|---|---|---|
| 1 | $67.46 | $67,46 |
| 10 | $64.1 | $641,00 |
| 100 | $60.75 | $6.075,00 |
| 500 | $56.2 | $28.100,00 |
| 1.000 | $52.4 | $52.400,00 |
5CSEBA2U19C8N Visão geral
A System-on-Chip (SoC) FPGA is a class of heterogeneous computing device that combines a microprocessor subsystem with programmable logic on a single die. This architecture enables deterministic hardware acceleration of latency-critical functions such as motor control, signal processing, and protocol termination running alongside a general-purpose OS on the ARM cores, eliminating the need for a separate processor-plus-FPGA two-chip solution and reducing board area, BOM cost, and inter-chip latency. Cyclone V SE sits within Intel's (formerly Altera's) low-power 28nm SoC FPGA lineup, optimized for cost-sensitive industrial, automotive, and video applications.
Key features of the 5CSEBA2U19C8N include the dual-core ARM Cortex-A9 MPCore with NEON media engine, single/double-precision floating-point unit, L1/L2 cache hierarchy, and CoreSight debug. The FPGA fabric provides 25K logic elements, embedded M10K memory blocks, variable-precision DSP blocks, and integrated memory controllers supporting DDR2/DDR3/LPDDR2. The device includes high-speed transceivers, multiple PLLs, and a rich peripheral set (USB, EMAC, UART, SPI, I2C) exposed through the HPS-to-FPGA bridges.
The 28nm low-power process allows static power consumption below 250 mW typical, making the Cyclone V SE SoC suitable for fanless industrial enclosures and thermally constrained embedded systems. Compared to discrete processor-plus-FPGA designs, the shared on-die interconnect between HPS and FPGA fabric delivers sub-microsecond latency, simplifying deterministic real-time control loops. According to the Altera Cyclone V device handbook, the HPS-to-FPGA bridges support up to 128-bit data paths at the full HPS clock.
Typical applications include industrial motor control and PLC platforms, machine vision and video surveillance, factory automation HMIs, automotive driver-assistance subsystems, and embedded vision for smart retail or medical imaging. The Cyclone V SE family's broad OS support (Linux, VxWorks, FreeRTOS via Altera/Intel SoC EDS) accelerates time-to-market for embedded developers.
When designing with this device, allocate sufficient PCB real estate for the 484-pin BGA, ensure the HPS and FPGA banks have separate decoupling networks, and use the Altera SoC EDS toolkit with the ARM DS-5 debug environment. DDR3 trace lengths must be length-matched within the limits stated in the Cyclone V SE device handbook. Decoupling bulk and high-frequency ceramic capacitors should be placed as close as possible to each power pin.
This page synthesizes distributor pricing, drop-in alternatives from the Cyclone V SE family, and practical SoC FPGA design notes that go beyond the manufacturer datasheet alone.
Alternativas drop-in para 5CSEBA2U19C8N — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com 5CSEBA2U19C8N (mesmo formato e footprint) — diferindo em Package, Logic Elements, Process Technology, Mounting Type, DSP Blocks.
Ferramenta de comparação rápida — selecione peças alternativas para comparação lado a lado:
5CSEBA4U19C8N
✅ Drop-In✓ Em estoque
$54.75 / unidade
Ver ficha técnica →5CSEBA5U19C7N
✅ Drop-In✓ Em estoque
$99.2 / unidade
Ver ficha técnica →5CSEBA2U19C6N
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$74.6 / unidade
Ver ficha técnica →5CSEBA2U19I7N
✅ Drop-In ⚠️ Especificações não verificadas✓ Em estoque
$445.65 / unidade
Ver ficha técnica →5CSEBA2U19C8N Classificações máximas e características elétricas
| Family | Cyclone V SE SoC FPGA |
| Series | 5CSEA2 |
| Device Variant | 5CSEBA2 (25K logic elements, dual ARM Cortex-A9) |
| Core Architecture | Dual ARM Cortex-A9 MPCore with CoreSight |
| HPS Maximum Frequency | 600 MHz |
| FPGA Logic Elements | 25,000 |
| Embedded Memory (M10K) | 1,400 Kb (typical for 25K LE variant) |
| DSP Blocks | Variable-precision DSP |
| Process Technology | 28 nm low-power |
| Core Supply Voltage | 1.1 V |
| Memory Controller Support | DDR2, DDR3, LPDDR2 |
| High-Speed Transceivers | Present (Cyclone V SE family feature) |
| PLLs | Multiple (per Cyclone V SE device handbook) |
| Encapsulamento | 484-pin UBGА (19x19 mm) |
| Tipo de montagem | Surface Mount |
| Temperatura de operação | 0C to +85C (commercial) |
| Nível MSL | 3 (per JEDEC J-STD-020, assumed for 484-BGA) |
| Status RoHS | Compliant |
Guia de Configuração de Pinos do 5CSEBA2U19C8N 484-pin ubgА (19x19 mm)
Configuração de pinos para 5CSEBA2U19C8N (pacote 484-pin ubgА (19x19 mm)). Este CI digital inclui GPIO, interfaces de comunicação (UART, SPI, I2C) e pinos de alimentação. Consulte o datasheet do fabricante para funções alternativas dos pinos e opções de configuração. Essencial para projeto de sistemas embarcados e layout de PCB.
Nenhum dado detalhado de pinagem disponível para 5CSEBA2U19C8N.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
5CSEBA2U19C8N é adequado para 7 aplicaçãos: Industrial Motor Control and PLC, Machine Vision and Video Surveillance, Factory Automation HMI, Automotive Driver-Assistance (ADAS) Subsystems, Embedded Medical Imaging, Smart Retail and Embedded Vision, Industrial Communication Gateways.
Industrial Motor Control and PLC
The 5CSEBA2U19C8N is well-suited for industrial motor control and PLC platforms where deterministic real-time response is mandatory. The dual-core ARM Cortex-A9 HPS at 600 MHz runs the PLC scan engine and EtherCAT/CANopen stack on Linux or VxWorks, while the 25K LE FPGA fabric implements sub-microsecond current-control loops, encoder decoding, and PWM generation. The HPS-to-FPGA bridges provide up to 128-bit data paths at full HPS clock, eliminating the inter-chip latency of a discrete MCU-plus-FPGA design. Industrial-grade variants like 5CSEBA2U19I7N extend operation to -40C.
Recomendado
Machine Vision and Video Surveillance
For machine vision and video surveillance, the 5CSEBA2U19C8N integrates image-sensor interface, image-processing pipelines, and H.264 compression in a single SoC. The 25K LE fabric is sufficient for mid-resolution (up to 1080p) preprocessing kernels such as color-space conversion, edge detection, and noise reduction, while the ARM cores run the Linux application stack including network streaming (RTSP/ONVIF) and motion detection analytics. The high-speed transceivers drive MIPI CSI-2 or LVDS sensor inputs, and DDR3 memory bandwidth via the HPS feeds frame buffers.
Recomendado
Factory Automation HMI
Human-Machine Interface (HMI) panels for factory automation benefit from the 5CSEBA2U19C8N's combination of an ARM Cortex-A9 application processor and programmable logic on one die. The HPS runs a Qt or Web-based GUI on Linux, handles touch-controller I2C, Ethernet connectivity, and USB peripherals, while the FPGA fabric implements real-time fieldbus interfaces (PROFINET, EtherCAT slave) and high-speed discrete I/O. The 484-pin U19 BGA supports rich multi-display LVDS outputs typical of industrial panel PCs, and the low-power 28nm process enables fanless sealed enclosures rated IP65.
Recomendado
Automotive Driver-Assistance (ADAS) Subsystems
The 5CSEBA2U19C8N's 28nm low-power process, 600 MHz Cortex-A9 HPS, and 25K LE fabric make it suitable for automotive ADAS subsystems such as rear-view cameras, surround-view preprocessing, and driver-monitoring. The HPS runs RTOS-based sensor fusion and CAN/LIN gateway stacks while the FPGA fabric performs low-latency image preprocessing, lens distortion correction, and object-detection pre-filtering. Industrial temp-grade variants are typically used; AEC-Q100-qualified Cyclone V SE variants are also available in this family for safety-critical subsystems.
Recomendado
Embedded Medical Imaging
Portable and point-of-care medical imaging devices benefit from the 5CSEBA2U19C8N's low-power SoC integration. The dual ARM cores execute Linux-based imaging application software and DICOM networking, while the FPGA fabric accelerates ultrasound beamforming, FFT-based Doppler processing, or X-ray detector readout pipelines. The 1.1V core supply and sub-250 mW typical static power enable battery-powered handheld ultrasound or endoscopic designs. The shared on-die HPS-FPGA interconnect eliminates the bandwidth bottleneck of PCIe-linked discrete solutions.
Recomendado
Smart Retail and Embedded Vision
Smart retail endpoints such as POS terminals, digital signage controllers, and people-counting sensors leverage the 5CSEBA2U19C8N's integrated ARM cores and FPGA fabric. The HPS runs Linux with browser-based signage content or analytics applications, while the FPGA fabric implements camera interface, barcode/QR decoding, and presence detection. The Cyclone V SE family's low power budget enables fanless in-store kiosk designs, and the DDR3 memory controller feeds frame buffers and graphics layers without external memory chips.
Recomendado
Industrial Communication Gateways
Protocol-conversion gateways (PROFINET to EtherNet/IP, Modbus TCP to CANopen) are well served by the 5CSEBA2U19C8N. The FPGA fabric implements hard real-time industrial Ethernet MACs with sub-100us cycle times, while the ARM cores handle TCP/IP routing, web-based configuration, and security (TLS, firewall). The DDR3 memory controller buffers large protocol payloads, and the high-speed transceivers support multi-port gigabit Ethernet PHYs. Industrial temperature variants extend deployment to outdoor cabinets and factory floors.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para 5CSEBA2U19C8N — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | 5CSEBA4U19C8N | 5CSEBA5U19C7N | 5CSEBA2U19C6N | 5CSEBA2U19I7N |
|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera |
| Package | 484-pin UBGА (19x19) | 484-pin UBGА (19x19) - same | 484-pin UBGА (19x19) - same | 484-pin UBGА (19x19) - same | 484-pin UBGА (19x19) - same |
| Logic Elements | 25,000 | 40,000 | 85,000 | 25,000 | 25,000 |
| HPS Max Frequency | 600 MHz | 925 MHz | 800 MHz | 600 MHz | 600 MHz |
| Speed Grade | C8 | C8 | C7 | C6 | I7 |
| Temperature Grade | Commercial (0C to +85C) | Commercial (0C to +85C) | Commercial (0C to +85C) | Commercial (0C to +85C) | Industrial (-40C to +100C) |
| Process | 28 nm low-power | 28 nm low-power | 28 nm low-power | 28 nm low-power | 28 nm low-power |
| Core Voltage | 1.1 V | 1.1 V | 1.1 V | 1.1 V | 1.1 V |
Principais diferenciais
- Best price-to-performance for entry-level Cyclone V SE SoC FPGA (vs 5CSEBA4U19C8N)
- Available with industrial temperature grade (vs 5CSEBA2U19C6N)
- Pin-compatible upgrade path to 40K and 85K LE (vs 5CSEBA5U19C7N)
Notas de projeto
The 484-pin UBGА package requires a 19x19 mm land pattern with 0.8 mm ball pitch. Use at least 6 PCB layers (4 signal + 2 ground planes) to route the DDR3, HPS peripheral, and FPGA fabric banks out of the BGA. Per the Altera Cyclone V device handbook, via-in-pad with filled-and-capped microvias is strongly recommended for inner-row BGA escape; assign dedicated ground vias adjacent to each power pin for return-path integrity.
Estimated: at 600 MHz HPS utilization and 25K LE fabric active with typical toggle rates, total power consumption is approximately 3 to 5 W depending on Quartus PowerPlay settings. Use a multi-rail PMIC to generate 1.1V core, 2.5V/3.3V HPS I/O, and FPGA I/O bank supplies; place decoupling bulk capacitors (10uF X5R) and high-frequency ceramics (0.1uF + 1nF) within 2 mm of each power pin per the Altera Cyclone V device handbook decoupling recommendations.
DDR3 traces routed to the HPS must be length-matched within the tDS/tDH budgets specified in the Cyclone V device handbook. Use fly-by topology for multi-rank DDR3, with VTT termination at the end of the address/command fly-by chain. Series-damping resistors (typically 33 ohm) may be needed on high-speed transceivers to control reflections; follow Intel's transceiver characterization reports for the chosen data rate.
Do not assume the 5CSEBA2U19C8N and 5CEBA2U19C8N (Cyclone V E, FPGA-only) have identical firmware behavior - the SE has the HPS subsystem exposed on shared pins and the bootloader (U-Boot) requires valid HPS clock configuration. When migrating from Cyclone V E to SE or vice versa, regenerate the Quartus pin assignment CSV using the correct device symbol. Industrial variants (I7) require different thermal derating than commercial (C8).
Informações de conformidade
RoHS compliant per distributor listings (JLCPCB confirms ROHS). Commercial temperature grade (C8) - AEC-Q100 variants exist in the Cyclone V SE family but the 5CSEBA2U19C8N base part is not AEC-Q100 qualified; AEC-Q100 devices carry distinct part numbers. MSL level not explicitly listed in provided data.
