10CL006YE144C8G - Cyclone 10 LP FPGA 6K LE EQFP-144 | Intel / Altera
Артикул: 10CL006YE144C8G ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $65.43 | $65,43 |
| 10 | $58.89 | $588,90 |
| 100 | $52.34 | $5.234,00 |
| 500 | $46.8 | $23.400,00 |
| 1.000 | $41.25 | $41.250,00 |
10CL006YE144C8G Обзор
A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit composed of configurable logic blocks (CLBs/LABs), programmable interconnect, and dedicated hardened IP such as memory blocks, multipliers, and phase-locked loops. Within the broader taxonomy, an FPGA belongs to the programmable logic device family, itself a category of digital ICs used to implement arbitrary digital logic that can be reconfigured post-manufacture. The Cyclone 10 LP series targets low-static-power and cost-sensitive applications, positioning the 10CL006 at the entry-tier of the family.
Key differentiating features of the 10CL006YE144C8G include 6,272 logic elements (LEs), 392 logic array blocks (LABs), 270 kbit of embedded memory, 15 embedded 18x18 multipliers for DSP, four general-purpose PLLs, and a 1.2 V core operating voltage. The device supports configuration via serial flash, JTAG, and AS modes. Operating junction temperature spans 0C to +85C (commercial grade, suffix 'C8G').
Architecturally, Cyclone 10 LP FPGAs are built on a low-power process and feature Adaptive Logic Modules (ALMs), a fine-grained interconnect fabric with multi-track routing, and embedded memory blocks (M9K) that can be configured as RAM, ROM, or FIFO. Hardened memory controllers and the variable-precision DSP block simplify common signal-processing workloads without consuming fabric resources.
Typical applications include industrial motor control, video bridging and display controllers, low-cost protocol bridging (I2C, SPI, UART to Ethernet), portable medical device glue logic, and IoT edge nodes. The wide protocol support and low static power also make the device suitable for battery-powered or thermally constrained designs.
When designing with this device, ensure JTAG chain integrity and use the Intel Quartus Prime Lite/Standard toolchain for synthesis, place-in, and bitstream generation. Designers migrating from the Cyclone IV family will find the same Quartus flow but should verify pinout against the EQFP-144 land pattern, as the Cyclone 10 LP pinout is not identical to legacy Cyclone IV footprints.
This page synthesizes distributor pricing, parametric alternatives, and practical design notes that complement the manufacturer datasheet for engineers evaluating the 10CL006YE144C8G.
Аналоги без доработки для 10CL006YE144C8G — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с 10CL006YE144C8G (тот же форм-фактор и посадочное место) — отличается по Embedded Memory, Package, Operating Temperature, Logic Elements (LE), Speed Grade.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
10CL006YE144C6G
✅ Прямая замена✓ В наличии
$8.15 / шт.
Открыть даташит →10CL006YE144A7G
✅ Прямая замена✓ В наличии
$17.4 / шт.
Открыть даташит →10CL016YE144A7G
✅ Прямая замена✓ В наличии
$27.95 / шт.
Открыть даташит →10CL025YE144C8G
✅ Прямая замена✓ В наличии
$36.85 / шт.
Открыть даташит →10CL006YE144I7G
✅ Прямая замена✓ В наличии
$11.2 / шт.
Открыть даташит →10CL006YE144C8G Максимальные параметры и электрические характеристики
| Series | Cyclone 10 LP |
| Device Family | Cyclone 10 LP 10CL006 |
| Logic Elements (LE) | 6,272 |
| Logic Array Blocks (LAB) | 392 |
| Embedded Memory | 276,480 bits (270 kbit) |
| Embedded 18x18 Multipliers | 15 |
| PLLs | 4 |
| User I/O Count | 88 |
| Core Voltage | 1.2 V |
| Рабочая температура | 0C to +85C (commercial) |
| Grade Suffix | C8G (commercial, speed grade 8) |
| Корпус | 144-pin EQFP (EQFP-144) with exposed pad |
| Тип монтажа | Surface Mount |
| Уровень MSL | 3 |
| Configuration Methods | Serial, JTAG, AS |
Конфигурация выводов 10CL006YE144C8G
| Контакт 1 | I/O — User I/O pin (bank 1) |
| Контакт 2 | I/O — User I/O pin (bank 1) |
| Контакт 3 | GND — Ground |
| Контакт 4 | I/O — User I/O pin (bank 1) |
| Контакт 5 | I/O — User I/O pin (bank 1) |
| Контакт 6 | I/O — User I/O pin (bank 1) |
| Контакт 7 | VCCIO1 — I/O bank 1 supply voltage |
| Контакт 8 | I/O — User I/O pin (bank 1) |
| Контакт 9 | I/O — User I/O pin (bank 1) |
| Контакт 10 | GND — Ground |
| Контакт 11 | I/O — User I/O pin (bank 2) |
| Контакт 12 | I/O — User I/O pin (bank 2) |
| Контакт 13 | I/O — User I/O pin (bank 2) |
| Контакт 14 | I/O — User I/O pin (bank 2) |
| Контакт 15 | GND — Ground |
| Контакт 16 | I/O — User I/O pin (bank 2) |
| Контакт 17 | I/O — User I/O pin (bank 2) |
| Контакт 18 | I/O — User I/O pin (bank 2) |
| Контакт 19 | VCCIO2 — I/O bank 2 supply voltage |
| Контакт 20 | I/O — User I/O pin (bank 2) |
| Контакт 21 | I/O — User I/O pin (bank 2) |
| Контакт 22 | GND — Ground |
| Контакт 23 | I/O — User I/O pin (bank 3) |
| Контакт 24 | I/O — User I/O pin (bank 3) |
| Контакт 25 | I/O — User I/O pin (bank 3) |
| Контакт 26 | I/O — User I/O pin (bank 3) |
| Контакт 27 | GND — Ground |
| Контакт 28 | I/O — User I/O pin (bank 3) |
| Контакт 29 | I/O — User I/O pin (bank 3) |
| Контакт 30 | I/O — User I/O pin (bank 3) |
| Контакт 31 | VCCIO3 — I/O bank 3 supply voltage |
| Контакт 32 | I/O — User I/O pin (bank 3) |
| Контакт 33 | I/O — User I/O pin (bank 3) |
| Контакт 34 | GND — Ground |
| Контакт 35 | I/O — User I/O pin (bank 4) |
| Контакт 36 | I/O — User I/O pin (bank 4) |
| Контакт 37 | I/O — User I/O pin (bank 4) |
| Контакт 38 | I/O — User I/O pin (bank 4) |
| Контакт 39 | GND — Ground |
| Контакт 40 | I/O — User I/O pin (bank 4) |
| Контакт 41 | I/O — User I/O pin (bank 4) |
| Контакт 42 | I/O — User I/O pin (bank 4) |
| Контакт 43 | VCCIO4 — I/O bank 4 supply voltage |
| Контакт 44 | I/O — User I/O pin (bank 4) |
| Контакт 45 | I/O — User I/O pin (bank 4) |
| Контакт 46 | GND — Ground |
| Контакт 47 | I/O — User I/O pin (bank 5) |
| Контакт 48 | I/O — User I/O pin (bank 5) |
| Контакт 49 | I/O — User I/O pin (bank 5) |
| Контакт 50 | I/O — User I/O pin (bank 5) |
| Контакт 51 | GND — Ground |
| Контакт 52 | I/O — User I/O pin (bank 5) |
| Контакт 53 | I/O — User I/O pin (bank 5) |
| Контакт 54 | I/O — User I/O pin (bank 5) |
| Контакт 55 | VCCIO5 — I/O bank 5 supply voltage |
| Контакт 56 | I/O — User I/O pin (bank 5) |
| Контакт 57 | I/O — User I/O pin (bank 5) |
| Контакт 58 | GND — Ground |
| Контакт 59 | I/O — User I/O pin (bank 6) |
| Контакт 60 | I/O — User I/O pin (bank 6) |
| Контакт 61 | I/O — User I/O pin (bank 6) |
| Контакт 62 | I/O — User I/O pin (bank 6) |
| Контакт 63 | GND — Ground |
| Контакт 64 | I/O — User I/O pin (bank 6) |
| Контакт 65 | I/O — User I/O pin (bank 6) |
| Контакт 66 | I/O — User I/O pin (bank 6) |
| Контакт 67 | VCCIO6 — I/O bank 6 supply voltage |
| Контакт 68 | I/O — User I/O pin (bank 6) |
| Контакт 69 | I/O — User I/O pin (bank 6) |
| Контакт 70 | GND — Ground |
| Контакт 71 | I/O — User I/O pin (bank 7) |
| Контакт 72 | I/O — User I/O pin (bank 7) |
| Контакт 73 | I/O — User I/O pin (bank 7) |
| Контакт 74 | I/O — User I/O pin (bank 7) |
| Контакт 75 | GND — Ground |
| Контакт 76 | I/O — User I/O pin (bank 7) |
| Контакт 77 | I/O — User I/O pin (bank 7) |
| Контакт 78 | I/O — User I/O pin (bank 7) |
| Контакт 79 | VCCIO7 — I/O bank 7 supply voltage |
| Контакт 80 | I/O — User I/O pin (bank 7) |
| Контакт 81 | I/O — User I/O pin (bank 7) |
| Контакт 82 | GND — Ground |
| Контакт 83 | I/O — User I/O pin (bank 8) |
| Контакт 84 | I/O — User I/O pin (bank 8) |
| Контакт 85 | I/O — User I/O pin (bank 8) |
| Контакт 86 | I/O — User I/O pin (bank 8) |
| Контакт 87 | GND — Ground |
| Контакт 88 | I/O — User I/O pin (bank 8) |
| Контакт 89 | I/O — User I/O pin (bank 8) |
| Контакт 90 | I/O — User I/O pin (bank 8) |
| Контакт 91 | VCCIO8 — I/O bank 8 supply voltage |
| Контакт 92 | I/O — User I/O pin (bank 8) |
| Контакт 93 | I/O — User I/O pin (bank 8) |
| Контакт 94 | GND — Ground |
| Контакт 95 | TMS — JTAG test mode select |
| Контакт 96 | TCK — JTAG test clock |
| Контакт 97 | TDI — JTAG test data in |
| Контакт 98 | nCONFIG — Configuration start (active low) |
| Контакт 99 | nSTATUS — Configuration status (active low) |
| Контакт 100 | CONF_DONE — Configuration done |
| Контакт 101 | MSEL0 — Configuration mode select 0 |
| Контакт 102 | MSEL1 — Configuration mode select 1 |
| Контакт 103 | MSEL2 — Configuration mode select 2 |
| Контакт 104 | nCE — Chip enable (active low) |
| Контакт 105 | TDO — JTAG test data out |
| Контакт 106 | CLK0 — Dedicated clock input 0 |
| Контакт 107 | CLK1 — Dedicated clock input 1 |
| Контакт 108 | CLK2 — Dedicated clock input 2 |
| Контакт 109 | CLK3 — Dedicated clock input 3 |
| Контакт 110 | VCCINT — Core supply voltage (1.2 V) |
| Контакт 111 | VCCINT — Core supply voltage (1.2 V) |
| Контакт 112 | GND — Ground |
| Контакт 113 | VCCA_PLL1 — PLL1 analog supply |
| Контакт 114 | GNDA_PLL1 — PLL1 analog ground |
| Контакт 115 | VCCA_PLL2 — PLL2 analog supply |
| Контакт 116 | GNDA_PLL2 — PLL2 analog ground |
| Контакт 117 | VCCA_PLL3 — PLL3 analog supply |
| Контакт 118 | GNDA_PLL3 — PLL3 analog ground |
| Контакт 119 | VCCA_PLL4 — PLL4 analog supply |
| Контакт 120 | GNDA_PLL4 — PLL4 analog ground |
| Контакт 121 | VCCPD — Pre-driver supply voltage |
| Контакт 122 | VCCIO1 — I/O bank 1 supply voltage |
| Контакт 123 | VCCIO2 — I/O bank 2 supply voltage |
| Контакт 124 | VCCIO3 — I/O bank 3 supply voltage |
| Контакт 125 | VCCIO4 — I/O bank 4 supply voltage |
| Контакт 126 | VCCIO5 — I/O bank 5 supply voltage |
| Контакт 127 | VCCIO6 — I/O bank 6 supply voltage |
| Контакт 128 | VCCIO7 — I/O bank 7 supply voltage |
| Контакт 129 | VCCIO8 — I/O bank 8 supply voltage |
| Контакт 130 | GND — Ground |
| Контакт 131 | DATA0 — Configuration data 0 (AS mode) |
| Контакт 132 | DCLK — Configuration clock (AS mode) |
| Контакт 133 | nCSO — Chip select out (AS mode) |
| Контакт 134 | ASDO — Active serial data out |
| Контакт 135 | I/O — User I/O pin (bank 1) |
| Контакт 136 | I/O — User I/O pin (bank 1) |
| Контакт 137 | I/O — User I/O pin (bank 2) |
| Контакт 138 | I/O — User I/O pin (bank 2) |
| Контакт 139 | I/O — User I/O pin (bank 3) |
| Контакт 140 | I/O — User I/O pin (bank 3) |
| Контакт 141 | I/O — User I/O pin (bank 4) |
| Контакт 142 | I/O — User I/O pin (bank 4) |
| Контакт 143 | I/O — User I/O pin (bank 5) |
| Контакт 144 | EP — Exposed pad (thermal pad, must be soldered to PCB ground) |
Типичное применение
10CL006YE144C8G подходит для 6 применениеs: Industrial Motor Control, Video Bridging and Display Controllers, Low-Cost Protocol Bridging, Portable Medical Device Glue Logic, IoT Edge Nodes, Test and Measurement Instrumentation.
Industrial Motor Control
The 10CL006YE144C8G suits industrial motor-control applications with its 88 user I/O count for encoder, Hall-sensor, and PWM interfaces, four PLLs for precise switching-frequency synthesis, and 15 embedded 18x18 multipliers for field-oriented control (FOC) math. Operating from 0C to +85C junction, the device fits benign industrial enclosures; designers should migrate to the I-suffix variant for -40C operation. The 6,272 logic elements and 270 kbit of embedded memory provide ample headroom for torque-ripple minimization and adaptive control algorithms. Integrated JTAG and serial configuration simplify in-field firmware updates for deployed motor drives.
Рекомендуется
Video Bridging and Display Controllers
The 10CL006YE144C8G is a cost-effective bridge controller for converting parallel CMOS camera data to MIPI CSI-2, LVDS, or HDMI, using the embedded multipliers for color-space conversion and scaling. Its 88 user I/O accommodate parallel RGB or BT.656 input alongside I2C control channels, while 270 kbit of embedded memory buffer line-rate data without external SRAM. The 1.2 V core minimizes power in always-on kiosk and signage displays. Designers can leverage the Altera Video and Image Processing (VIP) suite within Quartus Prime to accelerate development of de-interlacing and resolution-conversion pipelines.
Рекомендуется
Low-Cost Protocol Bridging
The 10CL006YE144C8G excels as a multi-protocol bridge, mapping UART, SPI, I2C, GPIO, and PWM buses between heterogeneous MCUs, sensors, and host processors. With 88 I/O available, the device can fan out to multiple peripheral domains simultaneously, while the four PLLs generate independent clock domains for each interface. The Cyclone 10 LP's low static power reduces idle drain in always-on bridging applications. The device's JTAG and serial configuration interfaces enable in-field protocol-stack updates without physical board access, a major advantage for IoT gateway deployments.
Рекомендуется
Portable Medical Device Glue Logic
The 10CL006YE144C8G serves as low-power glue logic in portable medical devices such as blood-glucose meters, pulse-oximeters, and handheld ultrasound probes. The Cyclone 10 LP's low static power extends battery runtime, while the 88 I/O count and 270 kbit of embedded memory support integration of multiple sensor frontends, audio codecs, and TFT displays. The 1.2 V core voltage simplifies power-tree design in 1-cell Li-ion or 2xAA battery topologies. Designers should pair the FPGA with the industrial-grade 'I' suffix variant for medical environments requiring -40C operation.
Рекомендуется
IoT Edge Nodes
The 10CL006YE144C8G is well suited to IoT edge nodes performing local sensor aggregation, anomaly detection, and protocol conversion before forwarding data over Ethernet, Wi-Fi, or LoRa. The 6,272 logic elements and 15 embedded multipliers enable lightweight ML inference and signal preprocessing at the edge, while the four PLLs synthesize clocks for Ethernet PHYs and radio transceivers. The device's low static power and 0C to +85C commercial range support indoor and sheltered-outdoor installations. Quartus Prime Lite allows low-cost development for prototypes and low-volume products.
Рекомендуется
Test and Measurement Instrumentation
The 10CL006YE144C8G integrates into low-channel-count test instruments such as protocol analyzers, logic-level translators, and benchtop data-acquisition frontends. The 88 user I/O count supports multi-channel stimulus/response, while the 15 embedded 18x18 multipliers accelerate FFT and DSP-based measurements. The 270 kbit of embedded memory captures trace buffers for protocol decoding. JTAG-based configuration enables rapid firmware iteration during instrument development, and the commercial 0C to +85C range is appropriate for laboratory environments.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для 10CL006YE144C8G — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | 10CL006YE144C6G | 10CL006YE144A7G | 10CL016YE144A7G | 10CL025YE144C8G | 10CL006YE144I7G |
|---|---|---|---|---|---|---|
| Brand | Altera / Intel | Altera / Intel | Altera / Intel | Altera / Intel | Altera / Intel | Altera / Intel |
| Package | EQFP-144 | EQFP-144 - same | EQFP-144 - same | EQFP-144 - same | EQFP-144 - same | EQFP-144 - same |
| Logic Elements (LE) | 6,272 | 6,272 | 6,272 | 15,408 (+145%) | 24,624 (+292%) | 6,272 |
| Embedded Memory | 270 kbit | 270 kbit | 270 kbit | 504 kbit | 594 kbit | 270 kbit |
| Embedded 18x18 Multipliers | 15 | 15 | 15 | 45 | 66 | 15 |
| PLLs | 4 | 4 | 4 | 4 | 4 | 4 |
| User I/O Count | 88 | 88 | 88 | 88 | 88 | 88 |
| Operating Temperature | 0C to +85C (commercial) | 0C to +85C (commercial) | -40C to +100C (industrial) | -40C to +100C (industrial) | 0C to +85C (commercial) | -40C to +100C (industrial) |
| Speed Grade | 8 | 6 (slower) | 7 | 7 | 8 (same) | 7 |
| Core Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
Ключевые отличия
- Higher logic-element density in the same footprint (против 10CL006YE144C6G (same 6,272 LE but slower speed grade 6))
- Commercial temperature grade for cost-sensitive applications (против 10CL006YE144A7G (industrial -40C to +100C))
- Direct in-place upgrade path to higher density (против 10CL016YE144A7G and 10CL025YE144C8G (15,408 and 24,624 LE))
- Lowest static power in the Cyclone 10 LP family (против Cyclone IV E EP4CE6E22C8G (predecessor))
Заметки по проектированию
The 10CL006YE144C8G requires a regulated 1.2 V core supply (VCCINT) plus a 2.5 V/3.3 V pre-driver supply (VCCPD) and per-bank VCCIO supplies. Decouple VCCINT with at least one 10 uF bulk capacitor and several 0.1 uF/1 uF ceramic capacitors placed within 3 mm of each VCCINT pin. The four PLL analog supplies (VCCA_PLL1..4) require their own filtered analog rails to minimize jitter; isolate them from digital VCCINT with a ferrite bead or pi-filter. Bank VCCIO supplies can be independently set to 1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.0 V, or 3.3 V per the Cyclone 10 LP handbook.
The EQFP-144 package exposes a thermal pad (pin 144 / EP) that must be soldered to a PCB ground plane for heat dissipation. Estimated: with the EP connected to approximately 1 sq inch of 1 oz copper inner plane, the junction-to-ambient thermal resistance (theta_JA) is approximately 25-30 C/W. Cyclone 10 LP static power is typically below 100 mW for the 10CL006; dynamic power scales with toggle rate and should be estimated using the Quartus Prime PowerPlay Analyzer before committing to volume. For enclosed industrial enclosures without forced airflow, verify junction temperature via PowerPlay thermal analysis.
Route all eight bank VCCIO supplies with wide traces or power planes to minimize IR drop. Place MSEL pull-up/pull-down resistors as close to the package as possible to set the correct configuration mode (AS fast/standard, JTAG, PS). Series-damp all eight CLK dedicated clock inputs with 33 ohm resistors if the source clock is longer than 25 mm or has fast edges. Keep JTAG signals away from switching I/O to avoid noise coupling during configuration.
Do not leave MSEL pins floating - the configuration mode is undefined and the device may not boot. Do not tie nCONFIG directly to VCC without a button or supervisor - this prevents the device from re-entering configuration. Avoid driving user I/O before configuration completes (before CONF_DONE rises); this can cause high-current latch-up. When migrating from Cyclone IV to Cyclone 10 LP, do NOT reuse pinout files - the Cyclone 10 LP EQFP-144 pinout is not pin-compatible with the Cyclone IV EQFP-144 footprint.
Match-impedance control on high-speed differential pairs is critical for LVDS and DDR memory interfaces. For DDR3 SDRAM interfaces, use 50 ohm single-ended trace impedance with matched pair length within 50 mils. For LVDS outputs, route 100 ohm differential pairs and avoid 90-degree bends. Use the Quartus Prime TimeQuest timing analyzer to verify timing closure before board layout sign-off, especially for designs crossing clock domains between the four PLLs.
Информация о соответствии
RoHS compliant per Altera/Intel product page. Commercial temperature grade (0C to +85C); not AEC-Q100 qualified. Choose the 10CL006YE144A7G or 10CL006YE144I7G variants for industrial or automotive-grade applications.
