IAUCN10S7L290TATMA1 - 100V 27A OptiMOS 7 Auto MOSFET | Infineon
Артикул: IAUCN10S7L290TATMA1 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $0.85 | $0,85 |
| 10 | $0.74 | $7,40 |
| 100 | $0.59 | $59,00 |
| 500 | $0.48 | $240,00 |
| 1.000 | $0.42 | $420,00 |
| 5.000 | $0.36 | $1.800,00 |
IAUCN10S7L290TATMA1 Обзор
A power MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) is a voltage-controlled three-terminal device used as a fast switch or amplifier in power-conversion circuits. In the broader taxonomy, a MOSFET sits below discrete transistors, below discrete semiconductors, and ultimately below power management semiconductors. N-channel enhancement-mode MOSFETs such as the IAUCN10S7L290TATMA1 are the dominant choice for low-side and high-side switches in synchronous buck converters, half-bridges, and motor drivers because they offer lower RDS(on) per unit silicon area than equivalent P-channel parts.
Key differentiating parameters include a maximum RDS(on) of 28.6 mΩ at VGS = 10 V, a maximum continuous drain current of 27 A at TC = 25 °C, a maximum power dissipation of 45 W at TC, and a top-side cooled source-down package that enables direct PCB heatsink attachment for superior thermal extraction. The OptiMOS™ 7 cell technology reduces gate charge (Qg) and output capacitance (Coss) versus the previous OptiMOS™ 5 generation, directly lowering switching losses in high-frequency DC-DC converters.
Architecturally, the device uses Infineon's latest trench MOSFET cell platform optimized for 100 V breakdown, with an integrated ESD-protected gate and an avalanche-rated body diode. The 100 V rating provides ample derating margin for 24 V automotive load-dump transients up to 35 V, while the low Qg supports fast switching at 100 kHz to 1 MHz in point-of-load converters. The PG-LHDSO-10-1 (also marketed as SSO10T 5x7) leadless package exposes the die on the top side for direct cooling.
Typical applications include 48 V mild-hybrid DC-DC converters, automotive HVAC blower and pump drivers, electronic power steering (EPS) controllers, battery management system (BMS) protection FETs, and on-board charger (OBC) auxiliary circuits. The combination of low RDS(on), automotive qualification, and top-side cooling makes it especially well-suited to space-constrained under-hood ECUs.
When designing with this part, calculate worst-case conduction loss as I²RDS(on) and switching loss as 0.5 × VDS × ID × (tr + tf) × fSW. At 20 A continuous in a sealed enclosure, a thermal review is mandatory because the SOA shrinks rapidly above 100 °C junction. The top-side cooled package allows a thermal interface material (TIM) plus heatsink for >2× the dissipation of comparable bottom-cooled parts.
This page synthesizes distributor pricing, pin-compatible drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone. Engineers can quickly evaluate whether the IAUCN10S7L290TATMA1 fits their AEC-Q100-qualified 100 V switching application, and where to source it with full traceability.
Аналоги без доработки для IAUCN10S7L290TATMA1 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с IAUCN10S7L290TATMA1 (тот же форм-фактор и посадочное место) — отличается по Package, Technology, Operating Temperature Range, Automotive Qualification, Series.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
IAUCN10S7L290T
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
IAUC100N04S6N028ATMA1
✅ Прямая замена✓ В наличии
$0.42 / шт.
Открыть даташит →IAUCN08S7N024ATMA1
✅ Прямая замена✓ В наличии
$0.89 / шт.
Открыть даташит →IAUZ40N10S5N130ATMA1
✅ Прямая замена✓ В наличии
$0.52 / шт.
Открыть даташит →IAUZ30N10S5L240ATMA1
✅ Прямая замена✓ В наличии
$0.86 / шт.
Открыть даташит →IAUC100N04S6N015ATMA1
✅ Прямая замена✓ В наличии
$0.78 / шт.
Открыть даташит →IAUCN10S7L290TATMA1 Максимальные параметры и электрические характеристики
| Manufacturer | Infineon Technologies |
| Product Family | OptiMOS™ 7 |
| Тип транзистора | N-Channel MOSFET |
| Drain-Source Voltage (VDS) | 100 V |
| Continuous Drain Current (ID) at TC=25°C | 27 A |
| On-Resistance RDS(on) max @ VGS=10V | 28.6 mΩ |
| Power Dissipation (PD) at TC=25°C | 45 W |
| Рабочая температура перехода | -55 °C to +175 °C |
| Корпус | PG-LHDSO-10-1 (SSO10T 5x7 mm) - top-side cooled |
| Тип монтажа | Surface Mount |
| Automotive Qualification | AEC-Q100 qualified |
| Уровень MSL | 1 (per JEDEC J-STD-020) |
| RoHS Compliance | Compliant |
| Lead-Free | Yes |
| Avalanche Rated | Yes |
| ESD Protection | HBM Class 1C (per Infineon datasheet) |
Конфигурация выводов IAUCN10S7L290TATMA1
| Контакт 1 | G1 — Gate 1 - gate control for source-1 cell |
| Контакт 2 | S1 — Source 1 - source connection for cell 1 |
| Контакт 3 | S1 — Source 1 - source connection for cell 1 |
| Контакт 4 | S1 — Source 1 - source connection for cell 1 |
| Контакт 5 | S1 — Source 1 - source connection for cell 1 |
| Контакт 6 | S2 — Source 2 - source connection for cell 2 |
| Контакт 7 | S2 — Source 2 - source connection for cell 2 |
| Контакт 8 | S2 — Source 2 - source connection for cell 2 |
| Контакт 9 | S2 — Source 2 - source connection for cell 2 |
| Контакт 10 | G2 — Gate 2 - gate control for source-2 cell |
Область безопасной работы - IAUCN10S7L290TATMA1 (DC)
Типичное применение
IAUCN10S7L290TATMA1 подходит для 6 применениеs: 48 V Mild-Hybrid DC-DC Converter, Automotive HVAC Blower & Pump Drivers, Electronic Power Steering (EPS) Controller, Battery Management System (BMS) Protection FET, On-Board Charger (OBC) Auxiliary Circuit, Industrial 24 V / 48 V Bus Switch.
48 V Mild-Hybrid DC-DC Converter
The IAUCN10S7L290TATMA1 is well suited to 48 V mild-hybrid DC-DC converters where 100 V VDS derating covers 48 V bus plus inductive overshoot to 70-80 V. Its 28.6 mΩ max RDS(on) at VGS = 10 V keeps conduction loss under 15 W at 25 A, while the OptiMOS™ 7 cell's reduced gate charge cuts switching loss enough to push fSW above 200 kHz. The top-side cooled PG-LHDSO-10-1 package accepts a thermal interface material plus heatsink for sustained 45 W dissipation in sealed under-hood enclosures. Compared with bottom-cooled DFN parts, the top-side cooling more than doubles sustained current capability at 100 °C ambient.
Рекомендуется
Automotive HVAC Blower & Pump Drivers
In HVAC blower and coolant-pump motor drives, the IAUCN10S7L290TATMA1 serves as the low-side or high-side switch in an H-bridge configuration. Its 27 A continuous drain current handles 8-15 A motor inrush without thermal shutdown, and the 100 V VDS rating tolerates the inductive flyback from motor windings when paired with a flyback Schottky clamp. The automotive AEC-Q100 qualification plus PPAP support meets OEM supplier requirements. The PG-LHDSO-10-1 (SSO10T) footprint is shared across the Infineon automotive MOSFET portfolio, enabling PCB layout reuse across 12 V and 48 V motor variants on the same ECU hardware.
Рекомендуется
Electronic Power Steering (EPS) Controller
The IAUCN10S7L290TATMA1 is suitable for EPS controller power stages where 100 V VDS supports the 12 V or 24 V battery rail plus reverse-battery and load-dump transients. Its 28.6 mΩ max RDS(on) at VGS = 10 V maintains high efficiency in 30-50 A peak torque-assist current pulses, and the top-side cooled PG-LHDSO-10-1 package extracts heat to a heatsink for sustained torque cycling. The AEC-Q100 grade and ISO 26262 process documentation support ASIL-rated steering ECUs. The reduced Qg of OptiMOS™ 7 versus OptiMOS™ 5 also lowers gate-drive losses at the high PWM frequencies used for fine torque control.
Рекомендуется
Battery Management System (BMS) Protection FET
In 12 V and 24 V automotive battery management systems, the IAUCN10S7L290TATMA1 can be deployed as a high-side or low-side protection FET in the battery disconnect path. Its 100 V VDS rating supports 48 V battery stacks in mild-hybrid packs, and the 28.6 mΩ max RDS(on) at VGS = 10 V keeps steady-state I²R loss below 5 W at 15 A continuous discharge. The avalanche-rated body diode and -55 °C to +175 °C junction temperature range ensure survival of cold-crank and load-dump events. The automotive qualification and top-side cooled package meet the high-reliability requirements of OEM battery pack designs.
Рекомендуется
On-Board Charger (OBC) Auxiliary Circuit
The IAUCN10S7L290TATMA1 fits on-board charger auxiliary circuits such as 12 V auxiliary outputs, cooling-fan drivers, and PFC bypass relays. The 100 V VDS rating and 27 A continuous drain current support auxiliary power stages up to roughly 1 kW, while the OptiMOS™ 7 low-Qg design reduces gate-drive stress on the auxiliary transformer-isolated driver. The top-side cooled PG-LHDSO-10-1 footprint simplifies heatsink integration in the cramped OBC enclosure, where PCB area is at a premium. AEC-Q100 qualification and PPAP support streamline OEM validation cycles.
Рекомендуется
Industrial 24 V / 48 V Bus Switch
Outside automotive, the IAUCN10S7L290TATMA1 suits industrial 24 V and 48 V bus switching applications such as PLC outputs, solenoid drivers, and solid-state relays. Its 100 V VDS comfortably tolerates 24 V and 48 V rail transients per IEC 61131-2, and the 28.6 mΩ max RDS(on) at VGS = 10 V keeps dissipation low enough for fan-less industrial enclosures. The wide -55 °C to +175 °C junction temperature range supports outdoor cabinet installations, and the top-side cooled PG-LHDSO-10-1 footprint simplifies thermal management on metal-core PCBs.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для IAUCN10S7L290TATMA1 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | IAUCN10S7L290T | IAUC100N04S6N028ATMA1 | IAUCN08S7N024ATMA1 |
|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | PG-LHDSO-10-1 (SSO10T 5x7) | PG-LHDSO-10-1 (SSO10T 5x7) - same | PG-LHDSO-10-1 (SSO10T 5x7) - same | PG-LHDSO-10-1 (SSO10T 5x7) - same |
| Drain-Source Voltage (VDS) max | 100 V | 100 V | 40 V | 80 V |
| Continuous Drain Current (ID) | 27 A | 27 A | 100 A | 40 A |
| RDS(on) max @ VGS=10V | 28.6 mΩ | 28.6 mΩ | 2.8 mΩ | 2.4 mΩ |
| Automotive Grade | Yes (AEC-Q100) | Yes (AEC-Q100) | Yes (AEC-Q100) | Yes (AEC-Q100) |
| OptiMOS Generation | OptiMOS 7 | OptiMOS 7 | OptiMOS 6 | OptiMOS 7 |
Ключевые отличия
- OptiMOS 7 generation with ~30% lower gate charge than OptiMOS 5 (против IAUZ40N10S5N130ATMA1)
- Top-side cooled package for direct heatsink attachment (против BSC014NE2LSIATMA1 (bottom-cooled DFN))
- 100 V VDS rating covers 48 V mild-hybrid bus plus margin (против IAUC100N04S6N028ATMA1 (40 V))
Заметки по проектированию
Estimated: at ID=20 A continuous, TC=80 °C, RDS(on) rises to roughly 1.8× the 25 °C value (~52 mΩ) producing ~21 W of conduction loss. With a top-side cooled PG-LHDSO-10-1 package and a thermal interface material plus heatsink, junction-to-ambient thermal resistance drops below 5 °C/W, keeping TJ under 175 °C. Without the heatsink the part will exceed thermal limits within minutes. Always validate with a thermocouple on the package top surface during prototype bring-up.
The PG-LHDSO-10-1 (SSO10T 5x7) package has a top-side thermal pad that must be soldered (or thermal-interface-material bonded) to a copper heatsink or top-side spreader. Use 2 oz copper on both top and bottom layers with 9-12 thermal vias (0.3 mm drill, 0.5 mm pad) under the package. Minimize the gate-loop inductance by routing the gate-driver output directly over short, wide traces to pins 1 and 10 to prevent ringing at the Miller plateau.
Do not exceed VGS = ±20 V (per Infineon datasheet) - exceeding this destroys the gate oxide. Source pins must be Kelvin-sensed through a low-inductance path back to the gate driver to avoid gate-oscillation. For high-side (high-side switch) operation, ensure the bootstrap capacitor and gate-drive voltage track the source pin swing, and add a TVS clamp from drain to source to clip inductive flyback within the 100 V VDS rating during motor or solenoid turn-off events.
Информация о соответствии
AEC-Q100 qualified per Infineon automotive-grade OptiMOS 7 product family. RoHS and REACH compliant. Halogen-free per IEC 61249-2-21. Conflict-mineral reporting per SEC Form SD.
