MC9S12DT256MPVE - 16-bit HCS12 MCU, 256KB Flash, 112-LQFP | NXP
Артикул: MC9S12DT256MPVE ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $22.99 | $22,99 |
| 10 | $20.69 | $206,90 |
| 100 | $18.39 | $1.839,00 |
| 500 | $16.1 | $8.050,00 |
| 1.000 | $14.36 | $14.360,00 |
MC9S12DT256MPVE Обзор
A microcontroller (MCU) is a single-chip computer that combines a CPU core, program memory (Flash/ROM), data memory (RAM), and programmable peripherals such as timers, ADCs, and communication interfaces. The HCS12 family belongs to the 16-bit MCU category, sitting between 8-bit microcontrollers (e.g., HC08, S08) and 32-bit ARM Cortex-M microcontrollers, and is widely used in automotive body, chassis, and powertrain applications where deterministic interrupt response and rich peripheral integration matter more than raw clock speed.
Key features include 256KB Flash for application code, 12KB RAM, 4KB EEPROM, two SCI, two SPI, an I2C-bus-compatible module, an 8-channel 16-bit enhanced capture timer, two 10-bit ATDs with 8 channels each, CAN 2.0A/B-compatible MSCAN module, and JTAG/BDM debug interface. The 112-LQFP package supports the full peripheral complement and 91 GPIO pins, while the wide 2.35V-2.75V supply is paired with internal voltage regulation.
The HCS12 core implements a CISC architecture with 16-bit ALU, X/Y index registers, and a von-Neumann memory map (unified Flash/RAM/EEPROM addressing). Background Debug Mode (BDM) allows non-intrusive in-circuit debugging and Flash programming via a single-pin interface, simplifying production test. The CAN (MSCAN) peripheral supports both standard (11-bit) and extended (29-bit) identifier frames, with programmable bit timing for bus rates up to 1 Mbps, suitable for automotive CAN networks.
Typical applications include automotive body control modules, instrument clusters, HVAC controllers, lighting modules, CAN nodes in vehicle networks, and industrial automation nodes requiring 16-bit processing, deterministic interrupts, and field-upgradeable Flash. The S12DT family is fully pin-compatible across derivatives, enabling scalable designs with different memory and peripheral mixes.
When designing with this part, allocate a robust watchdog refresh strategy and verify the BDM/debug pinout matches your programming fixture. The 112-LQFP package requires a 4-layer PCB with adequate thermal copper for production programming, and decoupling capacitors must be placed within 5 mm of each supply pin per NXP guidelines.
This page synthesizes distributor pricing, lifecycle status, same-package drop-in alternatives (S12 family variants and the XDT256 upgrade), and practical design notes not found in the manufacturer datasheet alone.
Аналоги без доработки для MC9S12DT256MPVE — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с MC9S12DT256MPVE (тот же форм-фактор и посадочное место) — отличается по ADC, Supply Voltage, Package, Operating Temperature, Connectivity.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
MC9S12DT256CPVE
✅ Прямая замена✓ В наличии
$20.85 / шт.
Открыть даташит →MC9S12DT256MFUE
✅ Прямая замена✓ В наличии
$19.2 / шт.
Открыть даташит →MC9S12DJ256MPVE
✅ Прямая замена✓ В наличии
$17.95 / шт.
Открыть даташит →MC9S12XDT256VAA
✅ Прямая замена✓ В наличии
$9.05 / шт.
Открыть даташит →MC9S12DG256MFUE
✅ Прямая замена✓ В наличии
$14.95 / шт.
Открыть даташит →MC9S12XDT256MAL
✅ Прямая замена✓ В наличии
$15.85 / шт.
Открыть даташит →MC9S12DT256MPVE Максимальные параметры и электрические характеристики
| Core | HCS12 (16-bit CISC) |
| Maximum CPU Frequency | 25 MHz |
| Program Memory (Flash) | 256 KB |
| RAM | 12 KB |
| EEPROM | 4 KB |
| Разрядность шины данных | 16-bit |
| Напряжение питания | 2.35 V to 2.75 V (regulated core) |
| I/O Pins | 91 |
| ADC | 2 x 10-bit, 8 channels each (16 channels total) |
| Timers | 8-channel Enhanced Capture Timer (ECT) |
| Communication Interfaces | 2 x SCI (UART), 2 x SPI, 1 x I2C, 1 x CAN (MSCAN 2.0A/B) |
| Корпус | 112-LQFP (20x20 mm) |
| Тип монтажа | Surface Mount |
| Рабочая температура | -40C to +125C (automotive grade) |
| Debug Interface | Background Debug Mode (BDM) + JTAG |
| Статус RoHS | Compliant |
| Статус жизненного цикла | NRND (Not Recommended for New Designs) |
Конфигурация выводов MC9S12DT256MPVE
| Контакт 1 | PP0/KWP0 — Port P bit 0 / KWP module |
| Контакт 2 | PP1/KWP1 — Port P bit 1 / KWP module |
| Контакт 3 | PP2/KWP2 — Port P bit 2 / KWP module |
| Контакт 4 | PP3/KWP3 — Port P bit 3 / KWP module |
| Контакт 5 | PP4/KWP4 — Port P bit 4 / KWP module |
| Контакт 6 | PP5/KWP5 — Port P bit 5 / KWP module |
| Контакт 7 | PP6/KWP6 — Port P bit 6 / KWP module |
| Контакт 8 | PP7/KWP7 — Port P bit 7 / KWP module |
| Контакт 9 | VDDR — External voltage regulator supply |
| Контакт 10 | VSS — Digital ground |
| Контакт 11 | VDDX — External I/O supply |
| Контакт 12 | VSSX — I/O ground |
| Контакт 13 | BKGD — Background Debug Mode pin |
| Контакт 14 | RESET — External reset (active low) |
| Контакт 15 | TEST — Test mode (must be held high in normal operation) |
| Контакт 16 | XCLKS — Crystal select (high = Pierce mode) |
| Контакт 17 | EXTAL — External crystal/oscillator input |
| Контакт 18 | XTAL — Crystal output |
| Контакт 19 | VRH — ATD reference high voltage |
| Контакт 20 | VRL — ATD reference low voltage |
| Контакт 21 | VDDA — ATD analog supply |
| Контакт 22 | VSSA — ATD analog ground |
| Контакт 23 | PAD00/AN00 — Port AD bit 0 / ATD0 channel 0 |
| Контакт 24 | PAD01/AN01 — Port AD bit 1 / ATD0 channel 1 |
| Контакт 25 | PAD02/AN02 — Port AD bit 2 / ATD0 channel 2 |
| Контакт 26 | PAD03/AN03 — Port AD bit 3 / ATD0 channel 3 |
| Контакт 27 | PAD04/AN04 — Port AD bit 4 / ATD0 channel 4 |
| Контакт 28 | PAD05/AN05 — Port AD bit 5 / ATD0 channel 5 |
| Контакт 29 | PAD06/AN06 — Port AD bit 6 / ATD0 channel 6 |
| Контакт 30 | PAD07/AN07 — Port AD bit 7 / ATD0 channel 7 |
| Контакт 31 | PAD08/AN08 — Port AD bit 8 / ATD1 channel 0 |
| Контакт 32 | PAD09/AN09 — Port AD bit 9 / ATD1 channel 1 |
| Контакт 33 | PAD10/AN10 — Port AD bit 10 / ATD1 channel 2 |
| Контакт 34 | PAD11/AN11 — Port AD bit 11 / ATD1 channel 3 |
| Контакт 35 | PAD12/AN12 — Port AD bit 12 / ATD1 channel 4 |
| Контакт 36 | PAD13/AN13 — Port AD bit 13 / ATD1 channel 5 |
| Контакт 37 | PAD14/AN14 — Port AD bit 14 / ATD1 channel 6 |
| Контакт 38 | PAD15/AN15 — Port AD bit 15 / ATD1 channel 7 |
| Контакт 39 | PA0 — Port A bit 0 |
| Контакт 40 | PA1 — Port A bit 1 |
| Контакт 41 | PA2 — Port A bit 2 |
| Контакт 42 | PA3 — Port A bit 3 |
| Контакт 43 | PA4 — Port A bit 4 |
| Контакт 44 | PA5 — Port A bit 5 |
| Контакт 45 | PA6 — Port A bit 6 |
| Контакт 46 | PA7 — Port A bit 7 |
| Контакт 47 | PB0 — Port B bit 0 |
| Контакт 48 | PB1 — Port B bit 1 |
| Контакт 49 | PB2 — Port B bit 2 |
| Контакт 50 | PB3 — Port B bit 3 |
| Контакт 51 | PB4 — Port B bit 4 |
| Контакт 52 | PB5 — Port B bit 5 |
| Контакт 53 | PB6 — Port B bit 6 |
| Контакт 54 | PB7 — Port B bit 7 |
| Контакт 55 | PE0/XIRQ — Port E bit 0 / XIRQ interrupt |
| Контакт 56 | PE1/IRQ — Port E bit 1 / IRQ interrupt |
| Контакт 57 | PE2 — Port E bit 2 |
| Контакт 58 | PE3 — Port E bit 3 |
| Контакт 59 | PE4 — Port E bit 4 |
| Контакт 60 | PE5 — Port E bit 5 |
| Контакт 61 | PE6 — Port E bit 6 |
| Контакт 62 | PE7 — Port E bit 7 |
| Контакт 63 | PH0 — Port H bit 0 |
| Контакт 64 | PH1 — Port H bit 1 |
| Контакт 65 | PH2 — Port H bit 2 |
| Контакт 66 | PH3 — Port H bit 3 |
| Контакт 67 | PH4 — Port H bit 4 |
| Контакт 68 | PH5 — Port H bit 5 |
| Контакт 69 | PH6 — Port H bit 6 |
| Контакт 70 | PH7 — Port H bit 7 |
| Контакт 71 | PJ0 — Port J bit 0 |
| Контакт 72 | PJ1 — Port J bit 1 |
| Контакт 73 | PJ2 — Port J bit 2 |
| Контакт 74 | PJ3 — Port J bit 3 |
| Контакт 75 | PJ4 — Port J bit 4 |
| Контакт 76 | PJ5 — Port J bit 5 |
| Контакт 77 | PJ6 — Port J bit 6 |
| Контакт 78 | PJ7 — Port J bit 7 |
| Контакт 79 | PK0 — Port K bit 0 |
| Контакт 80 | PK1 — Port K bit 1 |
| Контакт 81 | PK2 — Port K bit 2 |
| Контакт 82 | PK3 — Port K bit 3 |
| Контакт 83 | PK4 — Port K bit 4 |
| Контакт 84 | PK5 — Port K bit 5 |
| Контакт 85 | PK6 — Port K bit 6 |
| Контакт 86 | PK7 — Port K bit 7 |
| Контакт 87 | PM0/CAN0TX — Port M bit 0 / CAN0 transmit |
| Контакт 88 | PM1/CAN0RX — Port M bit 1 / CAN0 receive |
| Контакт 89 | PM2/SPI0SCK — Port M bit 2 / SPI0 clock |
| Контакт 90 | PM3/SPI0MOSI — Port M bit 3 / SPI0 master-out slave-in |
| Контакт 91 | PM4/SPI0MISO — Port M bit 4 / SPI0 master-in slave-out |
| Контакт 92 | PM5/SPI0SS — Port M bit 5 / SPI0 slave select |
| Контакт 93 | PM6 — Port M bit 6 |
| Контакт 94 | PM7 — Port M bit 7 |
| Контакт 95 | PS0/RXD0 — Port S bit 0 / SCI0 receive |
| Контакт 96 | PS1/TXD0 — Port S bit 1 / SCI0 transmit |
| Контакт 97 | PS2/RXD1 — Port S bit 2 / SCI1 receive |
| Контакт 98 | PS3/TXD1 — Port S bit 3 / SCI1 transmit |
| Контакт 99 | PS4/MISO1 — Port S bit 4 / SPI1 master-in slave-out |
| Контакт 100 | PS5/MOSI1 — Port S bit 5 / SPI1 master-out slave-in |
| Контакт 101 | PS6/SCK1 — Port S bit 6 / SPI1 clock |
| Контакт 102 | PS7/SS1 — Port S bit 7 / SPI1 slave select |
| Контакт 103 | PT0/IOC0 — Port T bit 0 / ECT channel 0 |
| Контакт 104 | PT1/IOC1 — Port T bit 1 / ECT channel 1 |
| Контакт 105 | PT2/IOC2 — Port T bit 2 / ECT channel 2 |
| Контакт 106 | PT3/IOC3 — Port T bit 3 / ECT channel 3 |
| Контакт 107 | PT4/IOC4 — Port T bit 4 / ECT channel 4 |
| Контакт 108 | PT5/IOC5 — Port T bit 5 / ECT channel 5 |
| Контакт 109 | PT6/IOC6 — Port T bit 6 / ECT channel 6 |
| Контакт 110 | PT7/IOC7 — Port T bit 7 / ECT channel 7 |
| Контакт 111 | VDDR — External voltage regulator supply |
| Контакт 112 | VSS — Digital ground |
Типичное применение
MC9S12DT256MPVE подходит для 7 применениеs: Automotive Body Control Module (BCM), Instrument Cluster Display Controller, HVAC Climate Control Module, Automotive Lighting Module (Front/Rear Lamp ECU), Industrial CAN Node / PLC Slice, Battery Management Secondary Cell Monitor, Chassis / Suspension ECU.
Automotive Body Control Module (BCM)
The MC9S12DT256MPVE is well suited to automotive body control modules because of its 16-bit HCS12 core, 256 KB Flash, and integrated MSCAN 2.0A/B CAN controller. The DT variant's two 10-bit 8-channel ADCs let the BCM read multiple analog sensor inputs (door position, ambient light, temperature) while the ECT module handles PWM-driven outputs for window lifters, mirror adjusters, and seat motors. With 91 GPIO and two SCI/SPI modules, a single MCU can supervise door modules, lighting clusters, and RKE receivers without external expanders. The -40C to +125C automotive temperature grade and 112-LQFP package with thermal copper spreader support under-hood mounting. Compared to a 32-bit ARM Cortex-M solution, the HCS12 is cheaper per unit and has a longer automotive track record across the S12 family.
Рекомендуется
Instrument Cluster Display Controller
The MC9S12DT256MPVE drives segment-LCD or small TFT instrument clusters thanks to its enhanced capture timer, dual ADCs for fuel/temperature sensing, and SCI/SPI channels for cluster stepper-motor drivers. The 256 KB Flash stores lookup tables for the speedometer, tachometer, and warning-icon bitmaps, while the 12 KB RAM holds real-time frame buffers and stepper PWM states. The MSCAN module receives vehicle CAN messages at up to 1 Mbps from the BCM and powertrain ECUs, and the ECT module provides 8 channels of precise PWM for gauge stepper drive. With automotive-grade temperature and the 112-LQFP footprint, this MCU replaces discrete dashboards of older designs and fits the same PCB layout as the XDT256 successor.
Рекомендуется
HVAC Climate Control Module
HVAC climate control ECUs benefit from the MC9S12DT256MPVE's dual 10-bit ADCs (16 channels), which can read cabin temperature, ambient temperature, sun-load sensor, humidity probe, and evaporator thermistor simultaneously. The ECT generates up to 8 PWM channels for blower-speed control, mode-door actuators, and air-recirculation stepper control, while the SCI modules communicate with the cabin network and the I2C bus connects to digital temperature sensors and EEPROM storage. The 256 KB Flash holds the climate-control state machine and PID loops, and the -40C to +125C rating covers the under-dash thermal environment. Compared to an 8-bit MCU, the HCS12's 16-bit math shortens PID loop calculation time, improving temperature stability.
Рекомендуется
Automotive Lighting Module (Front/Rear Lamp ECU)
The MC9S12DT256MPVE drives LED matrix headlamps and rear lamp clusters via its 91 GPIO pins and 8 PWM-capable ECT channels, supporting sequential turn indicators, daytime running lights, and adaptive cornering lamps. The two ATDs provide closed-loop current sensing for LED strings, enabling per-string brightness calibration across the LED matrix, while the MSCAN module receives body-CAN lighting commands at 500 kbps typical. With 256 KB Flash for lighting algorithms and 4 KB EEPROM for fault-log retention, this MCU satisfies automotive lighting ECU requirements. The 112-LQFP package allows placement near the lamp driver with short analog traces, and the same family layout is reused across other lamp-ECU variants for scalable BOM.
Рекомендуется
Industrial CAN Node / PLC Slice
Outside automotive, the MC9S12DT256MPVE functions as a robust industrial CANopen or DeviceNet node for programmable logic controllers, motor starters, and sensor hubs. The MSCAN controller and 25 MHz HCS12 core handle 1 Mbps CAN traffic with deterministic 40 ns instruction cycles, while the ECT generates precise PWM outputs for valve and actuator control. The 91 GPIO pins and dual SCI/SPI let one MCU read multiple encoder feedback channels, drive IGBT gate drivers, and talk to a remote HMI display over SPI. With 256 KB Flash and 12 KB RAM, custom CANopen object dictionaries fit comfortably. The -40C to +125C temperature range covers factory-floor enclosures, and the 112-LQFP package is easy to hand-rework on industrial control boards.
Рекомендуется
Battery Management Secondary Cell Monitor
In battery-management subsystems the MC9S12DT256MPVE acts as a secondary-cell monitor supervisor that reads multiple cell voltages through the dual 10-bit ATDs (16 channels total), balances cell groups via ECT-driven MOSFET drivers, and reports cell status to the main BMS ECU over CAN. The 256 KB Flash holds cell-characterization tables, state-of-charge algorithms, and fault logs in the 4 KB EEPROM. The wide automotive temperature grade (-40C to +125C) handles under-hood and under-seat battery-pack environments. The 112-LQFP package provides enough GPIO to monitor 12 to 16 series cells without external multiplexer ICs, and the same S12DT family layout is reused across 12V, 24V, and 48V battery variants.
Рекомендуется
Chassis / Suspension ECU
The MC9S12DT256MPVE fits active suspension and chassis ECUs that require simultaneous high-speed ADC sampling of multiple damper-position sensors and precise ECT-driven actuator control. Two 10-bit ADCs (16 channels) read suspension-height sensors at 25 MHz system clock rates, while the ECT generates up to 8 PWM channels for proportional solenoid valves and DC motor drivers. MSCAN at 1 Mbps provides the real-time chassis-network link to the BCM and powertrain ECUs, and the 91 GPIO handle additional discrete I/O. The -40C to +125C temperature grade and 112-LQFP footprint suit wheel-well mounted ECUs, and the S12DT family pin-compatibility allows the same PCB layout across vehicle platforms with different memory/peripheral needs.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для MC9S12DT256MPVE — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | MC9S12DT256CPVE | MC9S12DT256MFUE | MC9S12DJ256MPVE | MC9S12XDT256VAA | MC9S12DG256MFUE |
|---|---|---|---|---|---|---|
| Package | 112-LQFP (20x20) | 112-LQFP (20x20) - same | 112-LQFP / QFP-112 - same | 112-LQFP (20x20) - same | 112-LQFP family - same | 112-QFP (S12D) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | HCS12 (16-bit) | HCS12 (16-bit) | HCS12 (16-bit) | HCS12 (16-bit) | HCS12X (16-bit, XGATE) | HCS12 (16-bit) |
| Maximum CPU Frequency | 25 MHz | 25 MHz | 25 MHz | 25 MHz | 80 MHz (3.2x) | 25 MHz |
| Flash | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB |
| ADC | 2 x 10-bit, 8 ch each (16 total) | 2 x 10-bit, 8 ch each | 2 x 10-bit, 8 ch each | 1 x 10-bit, 8 ch | 2 x 10-bit, 8 ch each | 1 x 10-bit, 8 ch |
| CAN (MSCAN) Module | 1 (CAN 2.0A/B) | 1 (CAN 2.0A/B) | 1 (CAN 2.0A/B) | 1 (CAN 2.0A/B) | 1 (CAN 2.0A/B) | 1 (CAN 2.0A/B) |
| Lifecycle Status | NRND | NRND | NRND | NRND | Active (recommended for new designs) | NRND |
| Operating Temperature | -40C to +125C | -40C to +85C (commercial) | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C |
Ключевые отличия
- Dual ATD (16 ADC channels) for analog sensor-dense applications (против MC9S12DJ256MPVE)
- Direct HCS12X upgrade path on the same 112-LQFP footprint (против MC9S12XDT256VAA)
- Established automotive-grade track record with full peripheral block (против MC9S12A128BCPV)
- Functionally equivalent XDT256MA-grade variant per independent comparison (против MC9S12XDT256MAL)
Заметки по проектированию
The MC9S12DT256MPVE requires an external 5V (VDDR/VDDX) supply with on-chip regulation to generate the 2.5V core voltage. Place 100 nF decoupling capacitors within 5 mm of every VDDA/VDDR/VDDX pin pair and a 10 uF bulk tantalum on VDDR. Per NXP AN2203 (S12 power-supply design), analog and digital grounds must connect at a single point near the MCU to minimize ADC noise. Estimated: at 25 MHz CPU clock the MCU draws approximately 30 mA active and 1 mA in stop mode; size the regulator for at least 100 mA peak.
Use a 4-layer PCB with a continuous ground plane beneath the 112-LQFP footprint to control impedance and provide thermal spreading. Route the EXTAL/XTAL traces as short symmetric differential pairs with grounded guard traces; keep them away from PWM and switching traces. The BKGD and RESET pins require 4.7 kohm pull-ups and should not be routed near high-frequency noise sources. According to NXP AN2469 (PCB layout for S12 MCUs), place the PLL filter capacitor within 10 mm of the MCU's VDDA/VDDR pins.
Do not leave the TEST pin floating; tie TEST high through a 4.7 kohm resistor to VDDR or the MCU may enter test mode at power-up. The XCLKS pin selects oscillator mode (low = external oscillator, high = Pierce/crystal) and must match your clock-source design. Avoid using SCI1 and SPI1 pins for GPIO if CAN (PM0/PM1) is also enabled, because the S12D peripheral-pin-mapping can re-route conflicting functions. Always re-validate any pinout change against the latest S12DT family reference manual.
For CAN bus at 1 Mbps, keep the MSCAN TX/RX traces (PM0/PM1) shorter than 50 mm and add 22 ohm series termination near the MCU side. Place the CAN transceiver (e.g., TJA1050/TJA1042) within 50 mm of the MCU and twist the CANH/CANL differential pair to the bus connector. For ADC channels, route analog traces away from digital switching traces and add a ground guard trace on each side to reduce digital-to-analog crosstalk below 1 LSB at 10-bit resolution.
Информация о соответствии
RoHS and REACH compliant per NXP product page. AEC-Q100 qualified for automotive applications (Grade 1: -40C to +125C). Lead-free LQFP package. Lifecycle status NRND per NXP product page (last verified 2026-10-17).
