EPC22C20N vs EPC21LC20 Karşılaştırma

Ayrıntılı yan yana karşılaştırma EPC22C20N tarafından Altera ve EPC21LC20 tarafından IntelAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Özellik Karşılaştırması

Parametre EPC22C20N EPC21LC20
Marka Altera Intel
Kategori Memory ICs Memory ICs
Yaşam Döngüsü Durumu Obsolete Aktif
Manufacturer Intel (formerly Altera) —
Device Type Configuration PROM for SRAM-based LUT FPGAs —
Target FPGA Family FLEX 10K, FLEX 6000, APEX 20K series —
Configuration Interface Serial (DCLK / DATA0 / nCONFIG / nSTATUS / CONF_DONE) —
Programming Interface IEEE 1149.1 JTAG (in-system programmable) IEEE 1149.1 (JTAG)
Besleme Gerilimi 3.3 V or 5 V —
Paket 20-pin PLCC (J-lead) —
Package Marking Code EPC22C20N —
Pin Sayısı 20 —
Montaj Türü Surface Mount / Socket Surface Mount (PLCC socket or solder)
İşletim Sıcaklığı [DATA_NEEDED: operating temperature range] —
Bitstream Capacity [DATA_NEEDED: bitstream capacity in bits] —
Configuration Time [DATA_NEEDED: typical configuration time] —
RoHS Durumu [DATA_NEEDED: RoHS status] [DATA_NEEDED: confirm from Altera product page]
Lead-Free Status [DATA_NEEDED: lead-free status] —
Yaşam Döngüsü Durumu Obsolete (last-time-buy from Altera announced for legacy configuration devices) —
Bellek Türü — Serial Configuration PROM (Flash-based, in-system programmable)
Density — 2 Mb (2,097,152 bits)
Configuration Mode Supported — Serial (PS) for Altera SRAM-based LUT FPGAs
Maximum DCLK Frequency — 10 MHz
Access Time — approximately 35 ns [DATA_NEEDED: confirm exact datasheet figure]
Program/Erase Endurance — 100 cycles minimum [DATA_NEEDED: confirm from datasheet]
Operating Voltage (VCC) — 3.0 V to 3.6 V (3.3 V typical)
Standby Current — [DATA_NEEDED: ICCSB value]
Active Read Current — [DATA_NEEDED: ICC active current]
Operating Temperature (commercial) — 0 °C to +70 °C (LC suffix)
Operating Temperature (industrial) — [DATA_NEEDED: -40 to +85 °C for LI variant]
Paket / Kas — 20-pin PLCC (J-lead, JEDEC MS-018)
MSL Seviyesi — [DATA_NEEDED: confirm moisture sensitivity level]
Lead-Free (Pb-free) — [DATA_NEEDED: confirm]
Compatible FPGA Families — ACEX, APEX, Cyclone, FLEX, Mercury, Stratix (SRAM-based LUT)
JTAG Boundary-Scan Compliant — Yes (IEEE Std 1149.1)
Data Width — 1 bit (serial DATA output)

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin