IRS2011STRPBF vs IR2114SSPBF Karşılaştırma
Ayrıntılı yan yana karşılaştırma IRS2011STRPBF tarafından Infineon ve IR2114SSPBF tarafından InfineonAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | IRS2011STRPBF | IR2114SSPBF |
|---|---|---|
| Marka | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Fonksiyon | Half-Bridge Gate Driver | — |
| Configuration | High-Side and Low-Side, Independent Channels | Half-bridge gate driver |
| Çıkış Sayısı | 2 | 2 (high-side + low-side) |
| Maximum Offset Voltage (High-Side) | 200 V | — |
| Output Current (Source / Sink) | 1 A typical / 1 A typical | — |
| Propagation Delay (ton/toff) | 60 ns typical | — |
| Delay Matching | 20 ns maximum | — |
| Logic Input Compatibility | 3.3 V CMOS / LSTTL | — |
| Bootstrap Supply | Integrated bootstrap diode, floating channel | — |
| Supply Voltage (VCC) | 10 V to 20 V | — |
| Negative Transient Tolerance | Yes, dV/dt immune | — |
| Paket | 8-SOIC (DSO-8) | 24-SSOP (7.80 mm wide, 1.75 mm height) |
| İşletim Sıcaklığı | -40 C to +125 C | -40 C to +125 C |
| Montaj Türü | Surface Mount | Surface Mount |
| RoHS Durumu | Compliant (PBF suffix) | Compliant |
| Suitable Drivers | MOSFETs and IGBTs | — |
| Ağ Yapısı | — | Non-inverting |
| Offset (high-side) Voltage (max) | — | 600 V |
| Gate Drive Supply (VCC) | — | 10 V to 20 V |
| Logic Supply (VDD) | — | 10 V to 20 V |
| Bootstrap Supply (VBS) | — | 10 V to 25 V (with respect to VS) |
| Source Current (typ.) | — | 2 A |
| Sink Current (typ.) | — | 3 A |
| Rise / Fall Time (typ.) | — | [DATA_NEEDED: rise/fall time] |
| Propagation Delay (typ.) | — | 50 ns |
| Input Logic Compatibility | — | 3.3 V / 5 V CMOS/LSTTL |
| UVLO Thresholds | — | VCC and VBS, internally set |
| Integrated Bootstrap Diode | — | Yes |
| Over-Current Shutdown | — | Yes (programmable, with FAULT output) |