MPX12D vs MPX2010DP Karşılaştırma
Ayrıntılı yan yana karşılaştırma MPX12D tarafından NXP Semiconductors ve MPX2010DP tarafından NXP SemiconductorsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | MPX12D | MPX2010DP |
|---|---|---|
| Marka | NXP Semiconductors | NXP Semiconductors |
| Kategori | Pressure Sensors | Pressure Sensors |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Pressure Type | Differential | — |
| Operating Pressure | 1.45 PSI (10 kPa) | — |
| Maximum Overload Pressure | 10.88 PSI (75 kPa) | — |
| Full-Scale Output Voltage | 0 to 55 mV (at 3 V supply) | — |
| Besleme Gerilimi | 3 V typical | 10 V DC typical (max 16 V) |
| Accuracy | ±5% | — |
| Çıkış Türü | Wheatstone Bridge (uncompensated) | Analog voltage, Wheatstone bridge (mV level) |
| Termination Style | PCB (through-hole) | — |
| Paket | 4-SIP Module | — |
| Port Size | Female, 0.136 in (3.45 mm) | — |
| Port Style | No Port (base-side pressure inlet) | — |
| Technology | Piezoresistive MEMS silicon shear strain gauge | Piezoresistive (silicon strain gauge bridge) |
| Compensation | Uncompensated (external compensation required) | — |
| İşletim Sıcaklığı | 0 °C to +85 °C | -40 °C to +125 °C |
| RoHS Durumu | [DATA_NEEDED: RoHS compliance status] | Compliant |
| Montaj Türü | Through-Hole | — |
| Duyarlılık Türü | — | Differential Pressure Sensor |
| Pressure Range | — | 0 to 10 kPa (0 to 1.45 PSI) |
| Typical Full-Scale Span | — | 25 mV at 10 V excitation |
| Zero Pressure Offset | — | 0 mV nominally (±1.0 mV max) |
| Linearity | — | ±0.05% (typ) |
| Temperature Compensation | — | 0 °C to +85 °C (on-chip) |
| Response Time | — | 1.0 ms (typical) |
| Maximum Overpressure | — | 75 kPa |
| Burst Pressure | — | 200 kPa |
| Port Configuration | — | Dual ports (differential), 0.19 inch / 4.93 mm tubes |
| Package / Mounting | — | 4-SIP Module (through-hole with axial tubes) |
| Media Compatibility | — | Dry air or non-corrosive gas |