EPC2TC32UCF48 vs EPC2TC32U So sánh

So sánh chi tiết song song của EPC2TC32UCF48 bằng Intel và EPC2TC32U bằng Altera. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

So sánh thông số kỹ thuật

Tham số EPC2TC32UCF48 EPC2TC32U
Thương hiệu Intel Altera
Danh mục Memory ICs FPGA & CPLD
Trạng thái vòng đời NRND NRND
Kiểu bộ nhớ Non-volatile configuration PROM (CMOS Flash-based) —
Memory Density 1.6 Mbit (1.6 Mb / 32 Mbit raw) —
Memory Configuration Serial configuration bitstream storage —
Supply Voltage (VCC) 3.0 V to 3.6 V (3.3 V typical) —
Supply Voltage (VCCIO) 1.8 V / 2.5 V / 3.3 V (bank-level) —
Output Drive Current (VCCIO) [DATA_NEEDED: IOH/IOL at 3.3 V VCCIO] —
Programming Interface IEEE Std. 1149.1 JTAG (in-system programmable) —
Configuration Interface Altera serial PROM interface (DCLK, DATA, nCONFIG, nSTATUS, CONF_DONE) Altera Passive Serial (DCLK / DATA0 / nCONFIG / nSTATUS / CONF_DONE)
Supported Configuration Modes FPP, AS, PS, JTAG (mode dependent on target FPGA MSEL pins) —
Daisy Chain Support Yes (multi-device cascade for >16 Mbit FPGAs) —
Maximum Cascaded Capacity Up to 16 Mbit total across chain —
Nhiệt độ hoạt động 0C to +70C (commercial) -40 C to +85 C
Hộp 48-pin TQFP (7x7 mm) 32-pin QFP (CAF48, lead-free)
Kiểu lắp đặt Surface Mount Surface Mount
Cấp MSL [DATA_NEEDED: MSL rating] [DATA_NEEDED: MSL level]
Trạng thái RoHS [DATA_NEEDED: confirm RoHS compliance] Compliant (lead-free / RoHS per distributor data)
Lead Free [DATA_NEEDED: confirm lead-free] —
Chức năng — Serial Configuration Device for SRAM-based LUT FPGAs
Kích thước bộ nhớ — 1.6 Mbit
JTAG Support — Yes (IEEE 1149.1 boundary-scan, ISP)
Điện áp cung cấp — 3.0 V to 3.6 V or 4.75 V to 5.25 V
Lead-Free Finish — Yes (U suffix)
Supported FPGA Families — Altera Stratix, Cyclone, APEX, ACEX, Mercury, Excalibur
Configuration Mode — Passive Serial (PS), JTAG
Configuration Time — [DATA_NEEDED: typical configuration time]
Programming Cycles — [DATA_NEEDED: minimum program/erase cycles]
Data Retention — [DATA_NEEDED: minimum data retention years]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá