5M240ZM68A5N - MAX V CPLD, 192 Macro Cells, 68-MBGA | Intel
MPN: 5M240ZM68A5N ✓ Hoạt động5M240ZM68A5N Tóm tắt
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that sits in the digital-logic hierarchy between simple PLDs and full FPGAs. It uses a flash-backed AND/OR fabric with macrocell-based logic blocks, delivering instant-on behavior, deterministic timing, and unlimited in-system reprogrammability. Within the broader taxonomy, the MAX V CPLD belongs to the programmable-logic family, which itself is a sub-category of digital ICs alongside ASICs, microcontrollers, and FPGAs. The MAX V family is Intel's low-power, non-volatile CPLD line optimized for cost-sensitive industrial, automotive, and consumer bridging roles.
Key features of the 5M240ZM68A5N include an ultra-low standby current of 25 uA, JTAG-based in-system programmability via IEEE 1149.1, support for 1.8V I/O standards, multi-voltage I/O banks for interfacing with 1.5V/1.8V/2.5V/3.3V logic, and a flash configuration memory that eliminates external boot devices. The 68-MBGA package suits space-constrained portable and industrial boards where board real estate is at a premium.
Architecturally, the device combines a non-volatile flash fabric with four logic array blocks (LABs) connected through a programmable interconnect array (PIA). This architecture provides predictable pin-to-pin timing, fixed I/O placement, and excellent signal-integrity performance for bus-bridging, power-sequencing, and control-state-machine designs. The MAX V architecture is purpose-built for low-power glue logic where FPGAs would be over-spec and discrete logic would consume too much board area.
Typical applications include I/O expansion and voltage translation in industrial controllers, power-sequencing and reset orchestration on multi-rail embedded platforms, LED and motor-control state machines, glue-logic replacement on legacy PCB revisions, and bridge interfaces between microcontrollers and high-speed peripherals. The 25 uA standby current also makes it attractive for battery-powered systems that require non-volatile logic at idle.
When designing with this device, ensure the MBGA land pattern uses NSMD (non-solder-mask-defined) pads with proper via-in-pad or tented-via escape routing for reliable reflow. Decoupling requires 100 nF X7R ceramics on each VCCIO/VCCINT pair placed within 50 mils of the ball. The Quartus Prime or Intel Quartus II design environment supports JTAG programming through a USB-Blaster or compatible download cable. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet.
Bộ thay thế dễ dàng lắp đặt cho 5M240ZM68A5N — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với 5M240ZM68A5N (cùng hình factor và footprint) — khác nhau ở Package, Operating Temperature, Programming Interface, Configuration Memory, Family.
5M160ZM68A5N
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →5M160ZM68C5N
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →5M160ZM68I5N
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →5M240ZM100A5N
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →5M1270ZF256A5N
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →5M240ZM68A5N Tỷ lệ tối đa & tính chất điện
| Family | MAX V |
| Device Type | CPLD (Complex Programmable Logic Device) |
| Macro Cells | 192 |
| User I/Os | 52 |
| Logic Array Blocks (LABs) | 4 |
| Maximum Internal Frequency | 118.3 MHz |
| Propagation Delay (tPD) | 17.7 ns |
| Supply Voltage (VCCINT) | 1.71 V to 1.89 V |
| Standby Current | 25 uA (typical) |
| Configuration Memory | Flash (non-volatile) |
| Programming Interface | JTAG (IEEE 1149.1) |
| I/O Voltage Standards | 1.5V / 1.8V / 2.5V / 3.3V LVCMOS/LVTTL |
| Temperature Grade | Industrial |
| Hộp | 68-ball MBGA (Micro BGA) |
| Kiểu lắp đặt | Surface Mount (BGA) |
| Trạng thái RoHS | Compliant |
Cấu hình chân 5M240ZM68A5N
| Chân A1 | I/O — User I/O bank 1 |
| Chân A2 | I/O — User I/O bank 1 |
| Chân A3 | I/O — User I/O bank 1 |
| Chân A4 | I/O — User I/O bank 1 |
| Chân A5 | VCCIO1 — I/O supply bank 1 |
| Chân A6 | I/O — User I/O bank 1 |
| Chân A7 | I/O — User I/O bank 1 |
| Chân A8 | I/O — User I/O bank 1 |
| Chân B1 | I/O — User I/O bank 1 |
| Chân B2 | GND — Ground |
| Chân B3 | I/O — User I/O bank 1 |
| Chân B4 | I/O — User I/O bank 1 |
| Chân B5 | I/O — User I/O bank 1 |
| Chân B6 | I/O — User I/O bank 1 |
| Chân B7 | GND — Ground |
| Chân B8 | I/O — User I/O bank 1 |
| Chân C1 | I/O — User I/O bank 2 |
| Chân C2 | I/O — User I/O bank 2 |
| Chân C3 | I/O — User I/O bank 2 |
| Chân C4 | VCCINT — Core supply 1.8V |
| Chân C5 | VCCINT — Core supply 1.8V |
| Chân C6 | I/O — User I/O bank 2 |
| Chân C7 | I/O — User I/O bank 2 |
| Chân C8 | I/O — User I/O bank 2 |
| Chân D1 | I/O — User I/O bank 2 |
| Chân D2 | I/O — User I/O bank 2 |
| Chân D3 | I/O — User I/O bank 2 |
| Chân D4 | VCCIO2 — I/O supply bank 2 |
| Chân D5 | GND — Ground |
| Chân D6 | I/O — User I/O bank 2 |
| Chân D7 | I/O — User I/O bank 2 |
| Chân D8 | I/O — User I/O bank 2 |
| Chân E1 | I/O — User I/O bank 3 |
| Chân E2 | I/O — User I/O bank 3 |
| Chân E3 | I/O — User I/O bank 3 |
| Chân E4 | GND — Ground |
| Chân E5 | TDI — JTAG test data in |
| Chân E6 | I/O — User I/O bank 3 |
| Chân E7 | I/O — User I/O bank 3 |
| Chân E8 | I/O — User I/O bank 3 |
| Chân F1 | I/O — User I/O bank 3 |
| Chân F2 | I/O — User I/O bank 3 |
| Chân F3 | TCK — JTAG test clock |
| Chân F4 | TMS — JTAG test mode select |
| Chân F5 | TDO — JTAG test data out |
| Chân F6 | I/O — User I/O bank 3 |
| Chân F7 | I/O — User I/O bank 3 |
| Chân F8 | I/O — User I/O bank 3 |
| Chân G1 | I/O — User I/O bank 4 |
| Chân G2 | I/O — User I/O bank 4 |
| Chân G3 | I/O — User I/O bank 4 |
| Chân G4 | VCCIO3 — I/O supply bank 3 |
| Chân G5 | VCCIO4 — I/O supply bank 4 |
| Chân G6 | I/O — User I/O bank 4 |
| Chân G7 | I/O — User I/O bank 4 |
| Chân G8 | I/O — User I/O bank 4 |
| Chân H1 | I/O — User I/O bank 4 |
| Chân H2 | I/O — User I/O bank 4 |
| Chân H3 | I/O — User I/O bank 4 |
| Chân H4 | I/O — User I/O bank 4 |
| Chân H5 | GND — Ground |
| Chân H6 | I/O — User I/O bank 4 |
| Chân H7 | I/O — User I/O bank 4 |
| Chân H8 | I/O — User I/O bank 4 |
| Chân J1 | I/O — User I/O bank 4 |
| Chân J2 | I/O — User I/O bank 4 |
| Chân J3 | I/O — User I/O bank 4 |
| Chân J4 | I/O — User I/O bank 4 |
| Chân J5 | I/O — User I/O bank 4 |
| Chân J6 | I/O — User I/O bank 4 |
| Chân J7 | I/O — User I/O bank 4 |
| Chân J8 | I/O — User I/O bank 4 |
| Chân K1 | GND — Ground |
| Chân K2 | I/O — User I/O bank 4 |
| Chân K3 | I/O — User I/O bank 4 |
| Chân K4 | VCCINT — Core supply 1.8V |
| Chân K5 | VCCINT — Core supply 1.8V |
| Chân K6 | I/O — User I/O bank 4 |
| Chân K7 | I/O — User I/O bank 4 |
| Chân K8 | GND — Ground |
Ứng dụng tiêu biểu
5M240ZM68A5N phù hợp cho 6 Áp dụngs: Industrial I/O Expansion and Bus Bridging, Power Sequencing and Reset Orchestration, LED Lighting and Motor Control State Machines, Portable and Battery-Powered Devices, Glue-Logic Replacement on Legacy PCB Revisions, Bridge Interface for High-Speed Peripherals.
Industrial I/O Expansion and Bus Bridging
The 5M240ZM68A5N's 52 user I/Os and 192 macro cells make it ideal for expanding microcontroller GPIO counts and bridging between mismatched bus voltages in PLCs and industrial controllers. The MAX V family supports 1.5V/1.8V/2.5V/3.3V LVCMOS on the same die, allowing direct connection between a 3.3V ARM MCU and 1.8V sensors without external level shifters. The 25 uA standby current keeps idle power negligible on factory-floor equipment that spends most of its life in standby. Designers typically use this part to implement SPI-to-parallel, I2C-to-GPIO, or UART-to-LCD bridges inside industrial enclosures.
Được đề xuất
Power Sequencing and Reset Orchestration
The 5M240ZM68A5N's non-volatile flash fabric delivers instant-on behavior with deterministic timing, making it well-suited to multi-rail power-sequencing and reset-controller designs. With 17.7 ns propagation delay and 118.3 MHz internal frequency, the device can monitor PG (power-good) signals and assert sequenced enable lines to DC-DC converters within microseconds of boot. The 192 macro cells easily absorb the timing-state-machine logic for 4 to 8 sequenced rails. Compared to discrete analog sequencers, a single MAX V CPLD replaces an entire forest of one-shots and comparators.
Được đề xuất
LED Lighting and Motor Control State Machines
The 5M240ZM68A5N's 192 macro cells comfortably hold the state machines for DMX-controlled LED drivers, BLDC motor commutation, and stepper-motor pulse generators. The 52 user I/Os multiplex PWM outputs, hall-sensor inputs, and fault-flag lines for multi-axis systems. The 1.8V core reduces I/O-power dissipation versus 3.3V-only CPLDs in lighting fixtures that run continuously. According to Intel's MAX V reference designs, the part is widely deployed in architectural lighting controllers and small-format 3D printers.
Được đề xuất
Portable and Battery-Powered Devices
The 5M240ZM68A5N's 25 uA standby current makes it a strong fit for battery-powered devices such as handheld instruments, wearables, and remote sensors. The flash configuration memory retains logic state with zero boot latency, eliminating the surge current that SRAM-based FPGAs draw on wake-up. The 1.71V to 1.89V VCCINT range supports direct connection to single-cell Li-ion or two-AA chemistries via an LDO. Designers exploit this combination to add custom glue logic without sacrificing battery life.
Được đề xuất
Glue-Logic Replacement on Legacy PCB Revisions
The 5M240ZM68A5N is widely used to consolidate discrete 74-series logic, configuration EEPROMs, and bus-isolation gates onto a single programmable device during PCB rev D or later. Engineers replace 5 to 10 SSI/MSI packages with one MAX V CPLD, freeing board area and reducing BOM count. The JTAG-programmable flash fabric lets layout engineers iterate pin assignments without respinning the PCB. According to Intel's MAX V migration guides, this consolidation is one of the highest-ROI applications for the family.
Được đề xuất
Bridge Interface for High-Speed Peripherals
The 5M240ZM68A5N's 118.3 MHz internal frequency and 17.7 ns propagation delay suit it to bridging between microcontrollers and high-speed peripherals such as MIPI-CSI cameras, LVDS displays, and parallel-data ADCs. The 52 user I/Os accommodate parallel RGB interfaces and high-pin-count sensor buses. The deterministic timing of CPLD logic also makes it well-suited to source-synchronous clock forwarding where FPGA soft-IP would introduce jitter. This makes the part a common choice in vision-enabled IoT gateways and embedded camera modules.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho 5M240ZM68A5N — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | 5M160ZM68A5N | 5M160ZM68C5N | 5M160ZM68I5N |
|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel |
| Package | 68-MBGA | 68-MBGA - same | 68-MBGA - same | 68-MBGA - same |
| Family | MAX V | MAX V | MAX V | MAX V |
| Macro Cells | 192 | 160 (-17%) | 160 (-17%) | 160 (-17%) |
| User I/Os | 52 | 52 | 52 | 52 |
| Maximum Frequency | 118.3 MHz | 118.3 MHz | 118.3 MHz | 118.3 MHz |
| Propagation Delay | 17.7 ns | 17.7 ns | 17.7 ns | 17.7 ns |
| Supply Voltage | 1.71V to 1.89V | 1.71V to 1.89V | 1.71V to 1.89V | 1.71V to 1.89V |
| Standby Current | 25 uA | 25 uA | 25 uA | 25 uA |
| Temperature Grade | Industrial | Industrial | Commercial | Industrial |
Bảo phân biệt quan trọng
- Highest macro-cell density in the 68-MBGA MAX V footprint (vs5M160ZM68A5N)
- Industrial temperature grade by default (vs5M160ZM68C5N)
- Flash-based non-volatile fabric eliminates boot PROM (vsSRAM-based FPGA competitors)
Ghi chú thiết kế
The 68-MBGA package uses a 0.5 mm ball pitch and requires NSMD (non-solder-mask-defined) pads with via-in-pad or tented-via escape routing for reliable reflow. Per the Intel MAX V Hardware Guidelines, allocate at least 4 ground balls distributed across the package to provide a low-impedance return path for high-speed I/O. Place 100 nF X7R 0402/0201 decoupling capacitors within 50 mils of every VCCINT and VCCIO ball to control switching-noise transients.
Route JTAG signals (TCK, TMS, TDI, TDO) as a daisy-chain from the header to the device and ensure TCK is shorter than 2 inches with a 33 ohm series-termination resistor at the driver. According to Intel Quartus Prime programming notes, an unterminated TCK trace longer than 3 inches can cause JTAG programming failures at high clock rates. Keep JTAG traces away from switching DC-DC converter edges to avoid coupling noise into the test-access port.
Do not leave any VCCIO bank unpowered; an unpowered I/O bank can source current into the I/O cells and trigger latch-up. According to the MAX V datasheet, all four VCCIO banks must be tied to a valid supply (1.5/1.8/2.5/3.3V) even if the associated I/Os are unused. Configure unused I/Os as outputs driving low in the Quartus Prime pin planner to minimize dynamic current and avoid floating-input oscillations.
Estimated: at 118.3 MHz internal frequency with 192 macro cells switching at typical 20% toggle density, core current draw is approximately 30 to 50 mA from the 1.8V VCCINT rail. Plan a 200 mA LDO or 1.8V DC-DC rail with at least 100 mA headroom to support peak in-rush during JTAG programming. VCCIO banks can draw an additional 10 to 30 mA per bank depending on switching frequency and load.
Thông tin tuân thủ
RoHS and lead-free per Intel MAX V product page; industrial temperature grade per datasheet. AEC-Q100 not applicable - choose AEC-Q100 qualified parts for automotive under-hood.
