A3PE1500-1FG676I - ProASIC3E FPGA 1.5M Gates | Microchip
MPN: A3PE1500-1FG676I ✓ Hoạt độngA3PE1500-1FG676I Tóm tắt
What is an FPGA? A Field Programmable Gate Array is an integrated circuit that can be configured by the designer after manufacturing to implement arbitrary digital logic. Unlike fixed-function ASICs, FPGAs contain programmable logic blocks, configurable I/O, and routing resources; they are used for rapid prototyping, custom digital control, signal processing, and protocol bridging. The ProASIC3E family is built on a 130nm flash-based CMOS process, which means configuration is stored in non-volatile flash cells rather than external SRAM/EEPROM.
Key features include 1.5M system gates, 38,400 logic elements, 444 user I/Os, 276,480 bits of true dual-port SRAM, and up to 272MHz system performance. The flash fabric is live-at-power-up, eliminating the boot time and external configuration memory of SRAM FPGAs. In-system programming (ISP) is supported through JTAG, and the single-chip design reduces board area and bill-of-materials cost.
Technical depth: The device is manufactured in 130nm, seven-layer metal (six copper) flash-based CMOS. The non-volatile architecture provides instant-on operation and inherent design security because configuration bitstreams are not exposed on external memory buses. The FPGA supports a wide range of I/O standards through configurable I/O banks—though the exact I/O voltage list should be confirmed in the ProASIC3E datasheet—and includes dedicated clock conditioning circuitry.
Typical applications include communications infrastructure, industrial automation, medical electronics, aerospace and defense systems, automotive connectivity, and IoT edge processing. The 444 I/Os allow parallel bus interfaces, while the 1.5M gates are sufficient for soft-core processors, DSP datapaths, and protocol controllers.
Design consideration: The 1.5V core supply must be clean and adequately decoupled. Use a 0.1uF ceramic capacitor on each VCC/BGx pin and a 10uF bulk capacitor near the FPGA, with a solid ground plane; verify power sequencing if multiple I/O supplies are used. The FBGA-676 package has a 27 mm x 27 mm body with 1 mm ball pitch, requiring careful PCB fanout.
This page synthesizes distributor availability, pricing, verified drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a pre-engineering advantage for the A3PE1500-1FG676I.
Bộ thay thế dễ dàng lắp đặt cho A3PE1500-1FG676I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với A3PE1500-1FG676I (cùng hình factor và footprint) — khác nhau ở Core Supply Voltage, System Gates, Configuration, Package, Process Technology.
A3PE1500-1FGG676I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →A3PE1500-FG676I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →A3PE1500-1FG676
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
A3PE1500-2FGG676
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →M1A3PE1500-1FG676I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
A3PE1500-1FG676I Tỷ lệ tối đa & tính chất điện
| Family | ProASIC3E |
| System Gates | 1.5M |
| Logic Elements (CLBs) | 38400 |
| User I/Os | 444 |
| Total RAM Bits | 276480 |
| Max System Performance | 272MHz |
| Core Supply Voltage | 1.5V |
| Process Technology | 130nm, 7-layer metal (6 copper), Flash-based CMOS |
| Package Type | FBGA-676 (27 x 27 mm, 1 mm pitch, 2.23 mm height) |
| Kiểu lắp đặt | Surface Mount |
| Khoảng nhiệt độ hoạt động | 0°C to 70°C (per DigChip listing) |
| Configuration | Non-volatile Flash (single-chip, live at power-up) |
| Programming | In-system programmable (ISP) via JTAG |
| Trạng thái RoHS | RoHS non-compliant (per DigChip listing) |
| Lead-Free Status | Contains lead (per DigChip listing) |
Hướng dẫn cấu hình chân A3PE1500-1FG676I fbga-676 (27 x 27 mm, 1 mm pitch, 2.23 mm height)
Cấu hình chân cho A3PE1500-1FG676I (fbga-676 (27 x 27 mm, 1 mm pitch, 2.23 mm height) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho A3PE1500-1FG676I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
A3PE1500-1FG676I phù hợp cho 6 Áp dụngs: Communications Infrastructure & Networking, Industrial Automation & Motor Control, Medical Electronics & Diagnostic Devices, Aerospace & Defense / Secure Systems, Automotive Connectivity & Infotainment, IoT & Edge Computing.
Communications Infrastructure & Networking
The A3PE1500-1FG676I suits communications line cards, Ethernet switches, and small-cell baseband processing. Its 444 user I/Os connect to parallel DDR SRAM, network processors, and PHY devices. The flash-based fabric provides instant-on configuration, reducing system startup time for carrier equipment; 1.5M gates are enough for packet parsing, queue management, and custom MAC logic. The 276,480 bits of true dual-port SRAM support FIFOs and header buffers without external memory. Its 272MHz system performance meets typical 100M/1G Ethernet control-plane tasks. In-system programming permits field updates via JTAG. Recommended companion ProASIC3E parts include lower-density A3P600-1FGG256 for I/O expansion and higher-density A3PE3000-2FG484 for aggregate switching logic.
Được đề xuất
Industrial Automation & Motor Control
In industrial PLCs, servo drives, and robot controllers, the A3PE1500-1FG676I implements high-speed encoder interfaces, PWM generation, and safety logic. The 1.5V core and 130nm flash process keep dynamic power moderate, while 444 I/Os allow parallel connection to ADCs, DACs, and fieldbus ASICs. The live-at-power-up feature is valuable on factory floors where a delayed boot from external configuration memory is unacceptable. The 1.5M-gate capacity can host a soft-core MCU and custom motion-control peripherals. Designers should confirm the temperature grade with the datasheet because the I-suffix is intended for industrial use. Recommended companion parts include A3P600-1FGG256 for slave I/O boards and M1AFS1500-1FG676 for systems needing an integrated analog front end.
Được đề xuất
Medical Electronics & Diagnostic Devices
For diagnostic imaging, patient monitors, and portable medical instruments, the A3PE1500-1FG676I offers determinism and security. Flash configuration prevents accidental bitstream exposure, aiding intellectual-property protection. The 444 I/Os interface with medical ADCs, displays, and communication bridges; the 1.5M gates handle imaging pipelines and control logic. Its instant-on behavior supports safety-critical power-up sequences. Although not AEC-Q100 (not applicable), the device can be qualified by the medical OEM. Use the industrial temperature grade option when needed. Recommended companion FPGAs include A3P250-1VQG100T for low-power sensor front ends and A3P400-1PQG208I for handheld control modules.
Được đề xuất
Aerospace & Defense / Secure Systems
In avionics, UAVs, and secure communication systems, the A3PE1500-1FG676I's non-volatile flash fabric supports secure boot and tamper-resistant designs. M1 variants provide enhanced screening for defense programs. 444 user I/Os connect to sensors, serializers, and encrypted data links; 1.5M gates are ample for crypto-cores, telemetry, and interface bridging. The 272MHz -1 speed grade balances performance and power. The 676-ball FBGA with 1mm pitch suits rugged boards with adequate thermal vias. Designers should evaluate the M1A3PE1500-1FG676I for military temperature ranges. Recommended companion devices include M1AFS1500-2FGG676 for mixed-signal SoC tasks and A3PE3000-1FGG484I for higher gate-count processing.
Được đề xuất
Automotive Connectivity & Infotainment
The A3PE1500-1FG676I can be used in automotive gateway, telematics, and infotainment systems that need fast logic and flexible I/O without ASIC NRE. The flash FPGA is live at power-up, helping cameras and displays initialize quickly. Its 444 I/Os support LVDS, MIPI (with external SerDes), and parallel RGB interfaces; 1.5M gates host video scaling, protocol conversion, and gateway routing logic. Although the base part is not AEC-Q100 qualified, for harsh environments designers should select qualified or screened variants based on the datasheet. The 1.5V core reduces switching noise in dense boards. Recommended companion FPGAs include A3P250-2FGG144I for sensor fusion and A3P400-2FGG144 for display bridging.
Được đề xuất
IoT & Edge Computing
For smart-home hubs, industrial IoT gateways, and edge AI pre-processing, the A3PE1500-1FG676I provides reconfigurable logic with minimal power overhead. The non-volatile flash configuration eliminates boot flash and reduces BOM. 1.5M gates can implement multiple protocol interfaces (Ethernet, CAN, UART, SPI), sensor aggregation, and lightweight machine-learning inference preprocessing. 276,480 bits of true dual-port SRAM buffer streaming data. Live-at-power-up enables sub-millisecond wakeup and deterministic I/O state. When power is critical, the 1.5V core and 130nm process help. Recommended companion parts include A3P060-1VQ100T for simple sensor nodes and A3P250-2VQG100 for edge gateway glue logic.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho A3PE1500-1FG676I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | A3PE1500-1FGG676I | A3PE1500-FG676I | A3PE1500-1FG676 | A3PE1500-2FGG676 | M1A3PE1500-1FG676I |
|---|---|---|---|---|---|---|
| Package | FBGA-676 | FBGA-676 (same) | FBGA-676 (same) | FBGA-676 (same) | FBGA-676 (same) | FBGA-676 (same) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 1.5M | 1.5M | 1.5M | 1.5M | 1.5M | 1.5M |
| User I/O Count | 444 | 444 | 444 | 444 | 444 | 444 |
| Total RAM Bits | 276480 | 276480 | 276480 | 276480 | 276480 | 276480 |
| Max System Performance | 272MHz | 272MHz | 231MHz | 272MHz | 350MHz | 272MHz |
| Temperature Grade | Industrial (I-suffix; one listing 0-70C) | Industrial (I-suffix) | Industrial (I-suffix) | Commercial | Commercial | Military/Defense screening |
| RoHS Compliance | Non-compliant (contains lead) | Compliant (green package) | Non-compliant | Non-compliant | Compliant (green package) | Unknown |
Bảo phân biệt quan trọng
- Higher -1 speed grade than base ProASIC3E parts (vsA3PE1500-FG676I)
- Industrial I-suffix option not available on all variants (vsA3PE1500-1FG676)
- Non-green FG package for cost-sensitive legacy designs (vsA3PE1500-1FGG676I)
Ghi chú thiết kế
The A3PE1500-1FG676I operates from a 1.5V core supply with multiple VCC and ground balls. Decouple each VCC/BGx ball with a 0.1uF ceramic capacitor placed as close as possible to the ball, and add a 10uF bulk capacitor near one corner of the FPGA. If multiple I/O supply voltages are used, confirm sequencing requirements in the ProASIC3E datasheet to avoid latch-up or excessive current.
Estimated: for an FPGA dissipating 1.5W in the FBGA-676 package, the junction rise above ambient is theta_JA multiplied by power. Typical 27x27mm BGA theta_JA values range from 10-20C/W with airflow, so junction temperature could rise 15-30C. Add thermal vias under the exposed pad, use a solid ground plane, and provide airflow or a heatsink for high-utilization designs.
The 676-ball FBGA has 1mm ball pitch, requiring careful fanout. Use a 4-layer or 6-layer stackup with blind/buried vias if needed for dense routing. Keep high-speed I/O traces length-matched and impedance-controlled, and place decoupling capacitors on the bottom side directly opposite the FPGA's power balls when possible.
Because this is a flash-based FPGA, no external configuration memory is required. Do not leave the JTAG/ISP pins unconnected if field programming is expected; bring out TCK, TMS, TDI, TDO, and TRST to a header. Also, verify the temperature grade with the final Microchip datasheet—the I-suffix is normally industrial, but at least one distributor listing shows 0-70C for this part.
Thông tin tuân thủ
Per DigChip listing, A3PE1500-1FG676I contains lead and is RoHS non-compliant. The FGG676 variants are green/RoHS-compliant. AEC-Q100 not applicable for this FPGA family.
