EP1M350F672C7 - Mercury PLD FPGA 350K Gates | Intel/Altera
MPN: EP1M350F672C7 ✗ Cuối đờiEP1M350F672C7 Tóm tắt
A Programmable Logic Device (PLD) is a general term for any digital integrated circuit whose logic function is defined by the customer rather than the mask set. The Mercury family is built on a 0.18-micrometer SRAM-based CMOS process with an embedded 4-input LUT architecture and dual-port RAM blocks, allowing logic functions to be reconfigured in-system at any time. FPGAs sit at the top of the digital logic hierarchy: programmable logic > PLD > CPLD > FPGA > SRAM-based FPGA > Mercury family.
Key features include up to 350K usable gates, multiple embedded system blocks (ESBs), dedicated LVDS I/O support, and a clock management subsystem with up to four phase-locked loops (PLLs). The 672-pin FineLine BGA package exposes a high pin count to drive wide parallel buses and dozens of high-speed serial links, while the -7 speed grade designates a mid-range timing closure target for cost-sensitive commercial designs.
The Mercury architecture pairs logic elements with embedded memory blocks and dedicated multiplier support, allowing DSP-style datapaths to be implemented without consuming logic resources for arithmetic primitives. Multi-voltage I/O banks support interfacing to 3.3V, 2.5V, and 1.8V peripherals on the same die, simplifying mixed-voltage system design.
Typical applications include telecom line-card glue logic, high-speed serial protocol bridging, image preprocessing pipelines, and digital test instrumentation backplanes. The wide package makes it suitable as a system controller on PCI, PMC, and custom mezzanine cards in industrial and defense platforms.
When designing with this device, plan power sequencing for the 1.5V core and 3.3V I/O rails simultaneously, and ensure the JTAG chain is correctly ordered with any boundary-scan devices on the board. The FineLine BGA requires X-ray or careful optical inspection after reflow to verify sphere collapse.
This page consolidates distributor inventory signals, drop-in Mercury-family alternatives, and design notes not duplicated in the manufacturer datasheet, helping engineers shorten sourcing time and avoid cross-package pitfalls.
Bộ thay thế dễ dàng lắp đặt cho EP1M350F672C7 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EP1M350F672C7 (cùng hình factor và footprint) — khác nhau ở Package, Operating Temperature, Family, Speed Grade, Manufacturer.
EP1M350F780C7
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP1M350B780C7
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →EP1M350B780C6
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →EP1M350B780I6
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →EP1M350F780C5
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →EP1M350F672C7 Tỷ lệ tối đa & tính chất điện
| Device Family | Mercury PLD (APEX) |
| Manufacturer | Altera (acquired by Intel) |
| Typical Gate Count | 350,000 system gates |
| Embedded Memory | Embedded System Blocks (ESBs) |
| PLL Count | Up to 4 PLLs |
| Speed Grade | C7 (commercial, -7 speed) |
| Hộp | 672-ball FineLine BGA (FBGA) |
| Process Technology | 0.18 um SRAM CMOS |
| Logic Voltage | 1.5 V core |
| I/O Voltage Support | 3.3 V / 2.5 V / 1.8 V |
| LVDS Support | Yes (dedicated channels) |
| Configuration Method | SRAM-based, JTAG / EPC configuration devices |
| Nhiệt độ hoạt động | Commercial (0C to +85C) |
| Trạng thái RoHS | Lead-free / RoHS Compliant |
Hướng dẫn cấu hình chân EP1M350F672C7 672-ball fineline bga (fbga)
Cấu hình chân cho EP1M350F672C7 (672-ball fineline bga (fbga) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho EP1M350F672C7.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
EP1M350F672C7 phù hợp cho 6 Áp dụngs: Telecom Line-Card Glue Logic, High-Speed Serial Protocol Bridging, Image Preprocessing Pipelines, Digital Test Instrumentation Backplanes, Industrial Mezzanine Card Controller, Legacy Defense Avionics Sustainment.
Telecom Line-Card Glue Logic
The EP1M350F672C7's 350K-gate capacity and abundant LVDS-capable I/O make it well suited as a glue-logic controller on telecom line cards, where it bridges high-speed serial links to parallel backplane buses. With up to 4 PLLs and multi-voltage I/O banks (3.3V/2.5V/1.8V), it can fan out clocks and aggregate framer/mapper traffic without external PLL devices, reducing BOM. The 672-ball FBGA supports dozens of differential pairs needed for E1/T1, HDSL, and basic-rate ISLVDS links. Industrial-grade design margin allows deployment in temperature-controlled central-office racks. Place 0.1uF decoupling caps adjacent to every power ball, and route LVDS pairs with 100-ohm differential impedance and length matching within 5 mils.
Được đề xuất
High-Speed Serial Protocol Bridging
With LVDS I/O and embedded system blocks (ESBs) that can be configured as dual-port RAM or FIFO buffers, the EP1M350F672C7 implements protocol converters between SPI, I2C, UART, and parallel LVDS streams. The 350K-gate budget accommodates 8-bit CRC engines, small RISC soft-cores, and protocol state machines in a single device. The -7 speed grade supports internal clock rates up to ~100 MHz, sufficient for Fast Ethernet MAC wrapping or basic RapidIO bridging. Use the PLLs to derive multiple baud-rate clocks from a single reference. Add an external configuration EPROM (EPC) so the device self-loads at power-up without a host processor.
Được đề xuất
Image Preprocessing Pipelines
The Mercury family's ESBs can be cascaded into line buffers, enabling real-time image preprocessing such as thresholding, dilation, and convolution at video rates. The 350K-gate EP1M350F672C7 fits mid-resolution pipelines (e.g. 640x480 at 30 fps) where modest embedded multipliers suffice for simple kernels. LVDS I/O accepts camera-link or channel-link sensor data directly, while multi-voltage I/O drives standard TTL/CMOS image-capture ADCs. Pin-assign JTAG to a 10-pin header so design iterations can be downloaded in seconds during development. Use ESBs as dual-port RAM when implementing pixel FIFOs between camera and processor interfaces.
Được đề xuất
Digital Test Instrumentation Backplanes
The 672-ball FBGA exposes enough I/O for a full PXI/VXI-style backplane controller with 32+ trigger lines, 16+ analog-monitor gates, and a parallel instrument bus. Embedded RAM blocks store calibration coefficients and pattern buffers for ATE applications, while the -7 speed grade maintains sub-100ns deterministic responses for real-time triggers. Multi-voltage I/O banks (3.3/2.5/1.8V) interconnect legacy CMOS, modern LVTTL, and lower-voltage ADCs on the same board. Use JTAG boundary scan for in-system test access to every BGA ball, but ensure the JTAG chain is correctly ordered with any scan-bridge ASICs.
Được đề xuất
Industrial Mezzanine Card Controller
On PCI, PMC, and custom industrial mezzanine cards, the EP1M350F672C7 acts as the local bus master with enough logic capacity to implement scatter-gather DMA engines and 32-bit register interfaces. The 672-ball BGA's edge-density accommodates PMC-style 64-pin I/O connectors plus on-board DRAM address/data buses. -7 speed grade supports 33 MHz PCI with comfortable timing margin, while the embedded RAM buffers bus-master descriptors. Industrial-temperature parts in this family operate reliably in -40C to +85C chassis. Plan power sequencing so the 1.5V core and 3.3V I/O ramp together to avoid latch-up during hot-plug events.
Được đề xuất
Legacy Defense Avionics Sustainment
Many defense platforms have Mercury-based designs in active service, where sustaining engineering requires replacement parts that are functionally and pin-compatible. The EP1M350F672C7's wide temperature range variants and rugged FBGA package suit avionics bay environments. Its deterministic SRAM-based configuration allows bitstream revision tracking for airworthiness certification. In sustainment roles, the part can be sourced through authorized brokers with date-code traceability. Cross-reference to B-step revisions (EP1M350B780C7) for improved errata. Pair with a watchdog supervisor and ECC memory if the application requires single-event-upset mitigation.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho EP1M350F672C7 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | EP1M350F780C7 | EP1M350B780C7 | EP1M350B780C6 | EP1M350B780I6 | EP1M350F780C5 |
|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | 672-ball FineLine BGA | 780-ball FineLine BGA | 780-ball FineLine BGA | 780-ball FineLine BGA | 780-ball FineLine BGA | 780-ball FineLine BGA |
| Device Family | Mercury PLD (APEX) | Mercury PLD (APEX) | Mercury PLD (APEX) | Mercury PLD (APEX) | Mercury PLD (APEX) | Mercury PLD (APEX) |
| System Gates | 350K | 350K | 350K | 350K | 350K | 350K |
| Speed Grade | -7 (C7) | -7 | -7 | -6 | -6 | -5 |
| Operating Temperature | Commercial (0C to +85C) | Commercial | Commercial | Commercial | Industrial | Commercial |
| Silicon Step | C-step | C-step | B-step | B-step | B-step | C-step |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND | NRND |
Bảo phân biệt quan trọng
- Higher I/O count than same-die 672-ball baseline (vsEP1M350F780C7)
- Mid-range speed grade for cost-sensitive commercial designs (vsEP1M350F780C5)
- Improved silicon revision (B-step) for lower errata (vsEP1M350B780C7)
Ghi chú thiết kế
The Mercury FPGA requires simultaneous ramp of the 1.5V core and 3.3V I/O rails. Power sequencing violation can cause latch-up or permanent damage. Use a power-supply sequencer IC or place a Schottky steering network that ensures VCCINT never exceeds VCCIO by more than 2.5V during ramp. Decouple each power ball with a 0.1uF X7R ceramic plus a bulk 220uF tantalum at the supply entry point.
Estimated: at 100% toggle rate on all I/O at 100 MHz, the 672-FBGA Mercury dissipates approximately 3-5W. The FineLine BGA exposes a thermal pad under the package that should be soldered to a copper pour with thermal vias (9-16 vias, 0.3mm drill) to a backside heatsink plane. Without thermal management, junction temperature can exceed 100C in still air, triggering the on-die thermal diode warning.
Route LVDS differential pairs with 100-ohm differential impedance and intra-pair length matching within 5 mils. Keep clock PLL power supply isolated with a ferrite bead and 10uF + 0.1uF local decoupling. Provide 4-layer stack-up with continuous ground plane beneath the BGA - signal return paths depend on this reference. BGA escape requires microvia or 4-mil trace/space fabrication.
Do not program the configuration JTAG chain out of order - chain order must match the BSDL file exactly or Quartus/MAX+PLUS will fail to detect the device. Ensure MSEL pins select the correct configuration mode (AS, AP, PS, JTAG) with proper pull-up/pull-down resistors. Do not leave unused I/O floating - configure them as outputs driving low to minimize power and switching noise. Always read the silicon errata before final layout freeze.
Thông tin tuân thủ
RoHS-compliant per Altera product page and Alibaba broker listings (lead-free). REACH, halogen-free, and conflict-minerals declarations are not explicitly published; treat as unknown. Not AEC-Q100 qualified - this is a commercial-grade FPGA; industrial-temp variant (B780I6) is recommended for harsh-environment designs.