Intel

EPM7128SLI84-15 - 128-Macrocell CPLD, 15ns, PLCC-84 | Altera / Intel

Name: EPM7128SLI84-15 - 128-Macrocell CPLD, 15ns, PLCC-84 | Altera / Intel
Brand: Intel
SKU: EPM7128SLI84-15

MPN: EPM7128SLI84-15 ✗ Cuối đời

4.5 V to 5.5 V Vdss PLCC-84 (Plastic Leaded Chip Carrier, J-lead) Package EEPROM (in-system programmable) Memory

Yêu cầu báo giá

MOQ: 1 |

Xem tài liệu kỹ thuật (PDF) Xem các bộ thay thế

Số lượng

EPM7128SLI84-15 Tóm tắt

The Altera (Intel) EPM7128SLI84-15 is a 128-macrocell EE PLD from the MAX 7000 programmable logic family, delivering 15 ns pin-to-pin propagation delay in a 84-pin PLCC (J-lead) package. It operates from a single 4.5 V to 5.5 V supply and supports configurable I/O standards at 3.3 V or 5 V, enabling mixed-voltage interfacing with both legacy TTL and modern low-voltage CMOS logic.

What is a CPLD? A Complex Programmable Logic Device (CPLD) is a non-volatile, instantly-on semiconductor that implements glue logic, bus interfacing, state machines, and address decoding through AND/OR arrays of macrocells. Within the broader hierarchy, CPLD -> programmable logic device (PLD) -> programmable logic IC -> logic semiconductor. Compared with FPGAs, CPLDs typically have lower logic density but deterministic timing, lower power, and instant-on behavior from on-chip EEPROM, which makes them ideal for control-plane rather than data-plane functions.

Key features include 128 macrocells, 84 user I/O pins, a 15 ns propagation delay (tpd) at the commercial speed grade, and in-system programmability via the JTAG-compliant IEEE Std 1149.1 interface. The MAX 7000S architecture uses EEPROM process technology, allowing the configuration to be re-programmed in-circuit up to 100 times and retained for 20 years, eliminating external boot PROMs.

The architecture combines a programmable interconnect array, macrocells with product-term-based logic synthesis, and programmable I/O cells that support 3.3 V or 5.0 V output levels. Each macrocell contains a programmable AND/OR array feeding a configurable flip-flop, and the I/O block can be set per-pin to input, output, or bidirectional mode. This makes the part a flexible bridge between processors, memories, and peripherals.

Typical applications include bus address decoding and chip-select generation, glue logic between microprocessors and peripherals, state-machine control in industrial automation, peripheral interface bridging (PCI, ISA, VME), and post-PCB redesign fixes for digital logic that has already been laid out. The wide 5 V tolerance and 84 PLCC pins support legacy backplane designs where many control signals must be aggregated.

When designing with this device, ensure that the JTAG chain order matches the BSDL file and that all unused I/O pins are left floating or tied to GND through a weak pulldown, per Altera application notes. The PLCC-84 socket must be a through-hole or socketed type if field upgrades are expected; for high-vibration environments a press-fit socket is recommended.

Bộ thay thế dễ dàng lắp đặt cho EPM7128SLI84-15 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EPM7128SLI84-15 (cùng hình factor và footprint) — khác nhau ở Mounting Type, Package, Operating Temperature, Supply Voltage (VCCINT), Device Type.

EPM7128SLC84-10

Intel

Mounting Type: Surface Mount (J-bend)

Package: PLCC-84 (J-lead)

Operating Temperature: 0C to +70C (Commercial)

So sánh với EPM7128SLI84-15 →

EPM7128SLC84-15

Intel

Mounting Type: Surface Mount / Socketed (PLCC-84 socket)

Package: 84-Pin PLCC (J-Lead, J84)

Operating Temperature: 0C to +70C (commercial)

So sánh với EPM7128SLI84-15 →

EPM7128SLC84-15N

Altera

Mounting Type: Surface Mount

Package: 84-pin PLCC

Device Type: Complex Programmable Logic Device (CPLD)

So sánh với EPM7128SLI84-15 →

EPM7128SLI84-10

Altera

Mounting Type: Surface Mount / Socket

Package: 84-pin PLCC

Operating Temperature: -40 °C to +85 °C (industrial)

So sánh với EPM7128SLI84-15 →

EPM7128SLI84-10N

Altera

Mounting Type: Surface Mount

Package: 84-pin PLCC (J-Lead)

Operating Temperature: -40 C to +85 C (Industrial)

So sánh với EPM7128SLI84-15 →

EPM7128SLI84-10N

✅ Drop-In

Altera

📦 PLCC-84

MAX 7000S · 128 macro cells · 2,500 · 16 Logic Array Blocks (LABs) · 68 · 10 ns · 125 MHz · 4.75 V to 5.25 V (5 V typical)

Liên hệ để biết giá

Xem tài liệu →

EPM7128SLC84-15

✅ Drop-In

Intel

📦 PLCC-84

MAX 7000S · CPLD - Complex Programmable Logic Device · 128 · 2,500 · 68 (in 84-PLCC) · 84-Pin PLCC (J-Lead, J84) · -15 (15 ns pin-to-pin delay) · 15 ns

Liên hệ để biết giá

Xem tài liệu →

EPM7128SLC84-15N

✅ Drop-In

Altera

📦 PLCC-84

Complex Programmable Logic Device (CPLD) · MAX 7000 · 2.5K gates · 128 macrocells · 76.9 MHz · 15 ns · 5 V · 68 I/Os

Liên hệ để biết giá

Xem tài liệu →

EPM7128SLI84-10

✅ Drop-In

Altera

📦 PLCC-84

MAX 7000S · 2.5K · 128 · 68 · 8 · 10 ns · 100 MHz · 5.0 V

Liên hệ để biết giá

Xem tài liệu →

EPM7128SLC84-10

✅ Drop-In

Intel

📦 PLCC-84

MAX 7000S · CPLD (Complex Programmable Logic Device) · 128 · 2500 · 68 · 84 · PLCC-84 (J-lead) · 10 ns

Liên hệ để biết giá

Xem tài liệu →

EPM7128SLI84-15 Tỷ lệ tối đa & tính chất điện

Family	MAX 7000
Series	EPM7128S
Device Type	EE PLD (CPLD)
Macrocells	128
Logic Elements	250 (approx.)
User I/O Pins	84 (68 in 84-pin PLCC per some sources)
Propagation Delay (tpd)	15 ns
Supply Voltage (VCCINT)	4.5 V to 5.5 V
I/O Voltage Tolerance	3.3 V or 5.0 V (configurable)
Process Technology	CMOS EEPROM
Program Memory Type	EEPROM (in-system programmable)
Hộp	PLCC-84 (Plastic Leaded Chip Carrier, J-lead)
Nhiệt độ hoạt động	-40 C to +85 C (Industrial grade, 'I' suffix)
Số chân	84
Kiểu lắp đặt	Surface Mount (PLCC socket compatible)
Programming Interface	JTAG (IEEE 1149.1)
Maximum User Flash Endurance	100 program/erase cycles
Data Retention	20 years

Cấu hình chân EPM7128SLI84-15

Chân 1	I/O — User I/O - global clock option (GCLK1)
Chân 2	I/O — User I/O
Chân 3	I/O — User I/O
Chân 4	I/O — User I/O
Chân 5	I/O — User I/O
Chân 6	I/O — User I/O
Chân 7	I/O — User I/O
Chân 8	I/O — User I/O
Chân 9	I/O — User I/O
Chân 10	I/O — User I/O
Chân 11	I/O — User I/O
Chân 12	I/O — User I/O
Chân 13	GND — Ground
Chân 14	I/O — User I/O
Chân 15	I/O — User I/O
Chân 16	I/O — User I/O
Chân 17	I/O — User I/O
Chân 18	I/O — User I/O
Chân 19	I/O — User I/O
Chân 20	I/O — User I/O
Chân 21	I/O — User I/O
Chân 22	I/O — User I/O
Chân 23	I/O — User I/O
Chân 24	I/O — User I/O
Chân 25	I/O — User I/O
Chân 26	GND — Ground
Chân 27	I/O — User I/O
Chân 28	I/O — User I/O
Chân 29	I/O — User I/O
Chân 30	I/O — User I/O
Chân 31	I/O — User I/O
Chân 32	I/O — User I/O
Chân 33	I/O — User I/O
Chân 34	I/O — User I/O
Chân 35	I/O — User I/O
Chân 36	I/O — User I/O
Chân 37	I/O — User I/O
Chân 38	I/O — User I/O
Chân 39	GND — Ground
Chân 40	I/O — User I/O
Chân 41	I/O — User I/O
Chân 42	I/O — User I/O
Chân 43	I/O — User I/O
Chân 44	TDI — JTAG Test Data In
Chân 45	I/O — User I/O
Chân 46	I/O — User I/O
Chân 47	I/O — User I/O
Chân 48	I/O — User I/O
Chân 49	I/O — User I/O
Chân 50	I/O — User I/O
Chân 51	I/O — User I/O
Chân 52	GND — Ground
Chân 53	I/O — User I/O
Chân 54	I/O — User I/O
Chân 55	I/O — User I/O
Chân 56	I/O — User I/O
Chân 57	I/O — User I/O
Chân 58	I/O — User I/O
Chân 59	I/O — User I/O
Chân 60	I/O — User I/O
Chân 61	I/O — User I/O
Chân 62	I/O — User I/O
Chân 63	I/O — User I/O
Chân 64	I/O — User I/O
Chân 65	GND — Ground
Chân 66	I/O — User I/O
Chân 67	I/O — User I/O
Chân 68	I/O — User I/O
Chân 69	I/O — User I/O
Chân 70	TMS — JTAG Test Mode Select
Chân 71	I/O — User I/O
Chân 72	I/O — User I/O
Chân 73	I/O — User I/O
Chân 74	I/O — User I/O
Chân 75	I/O — User I/O
Chân 76	I/O — User I/O
Chân 77	I/O — User I/O
Chân 78	GND — Ground
Chân 79	I/O — User I/O
Chân 80	TCK — JTAG Test Clock
Chân 81	I/O — User I/O
Chân 82	I/O — User I/O
Chân 83	TDO — JTAG Test Data Out
Chân 84	VCC — 5 V supply (VCCINT)

Ứng dụng tiêu biểu

EPM7128SLI84-15 phù hợp cho 6 Áp dụngs: Microprocessor Bus Address Decoding, Industrial Control and Automation, Peripheral Interface Bridging, Legacy Telecom Backplane Glue Logic, PCB Redesign and Field-Replaceable Logic, Test and Measurement Instrumentation.

🔧

Microprocessor Bus Address Decoding

The EPM7128SLI84-15 fits microprocessor bus address decoding because its 128 macrocells and 84 PLCC pins can implement multi-bank chip-select decoders for legacy 16- and 32-bit busses without external AND/OR gates. With 15 ns tpd the part reliably registers between an Intel 8086/80286 bus cycle and peripheral access time, even at industrial temperature. Use the JTAG port for in-system updates to the decoder map, eliminating the need to swap PROMs or PALs when a peripheral changes. Compared to discrete 74LS/74F glue logic, a single CPLD consolidates address decoding, chip-select generation, and wait-state insertion in one reprogrammable device.

Được đề xuất

🏭

Industrial Control and Automation

In industrial automation the EPM7128SLI84-15 functions as a deterministic state-machine controller for PLC backplanes, motor control boards, and HMI panels. Its instant-on EEPROM eliminates FPGA configuration delays, ensuring deterministic boot-time behavior in safety-critical loops. The industrial temperature grade (-40 C to +85 C) plus 5 V I/O tolerance handles the harsh EMI and voltage transients typical of factory-floor environments. With 128 macrocells the part can implement multi-axis sequencing, encoder decoding, and PID timing in one device, replacing several discrete timers and counters.

Được đề xuất

EPM7128ELI84-20 · Intel EPM7128AETI100-7N · Altera

🌐

Peripheral Interface Bridging

The EPM7128SLI84-15 is well-suited to bridge incompatible peripheral interfaces such as ISA-to-PCI, parallel-port-to-memory, or 5 V TTL to 3.3 V CMOS logic. With 84 user I/O pins the part can run a full 32-bit data bus plus control signals concurrently, and the configurable 3.3 V/5 V I/O banks allow direct level translation without external buffers. The 15 ns tpd meets ISA-bus timing (250 ns cycle) with comfortable margin while the EEPROM-based design retains configuration through power cycles, eliminating boot PROMs.

Được đề xuất

EPM7128ELC84-12 · Altera EPM7128BTC100-10 · Intel

🖥️

Legacy Telecom Backplane Glue Logic

The EPM7128SLI84-15 serves telecom backplane designs where multi-drop TDM buses, parallel data paths, and control signaling must be aggregated without timing ambiguity. Its deterministic 15 ns propagation and 84 I/O pins are ideal for parallel-to-serial conversion, framing, and clock distribution in T1/E1 multiplexer boards. The 5 V tolerance supports legacy line-card interfaces, and the -40 C to +85 C industrial grade meets NEBS thermal requirements. Use the JTAG boundary-scan to verify interconnect during board bring-up and field service.

Được đề xuất

EPM7128SLC84-15N · Altera EPM7128AETC100-7N · Altera

🔧

PCB Redesign and Field-Replaceable Logic

When an existing PCB needs a logic change after fab, replacing discrete TTL/CMOS gates with the EPM7128SLI84-15 is an effective path: it consolidates 5-10 small packages into one PLCC-84 socket, leaves the I/O pinout identical, and lets the engineer rewrite logic via JTAG. The non-volatile EEPROM means no external boot PROM is needed and the design can be field-upgraded with a JTAG programmer. With 128 macrocells the part can absorb most glue-logic changes without resorting to a larger CPLD.

Được đề xuất

EPM7128SLC84-15 · Intel EPM7128SLC84-10 · Intel

📺

Test and Measurement Instrumentation

The EPM7128SLI84-15 is widely used in test-and-measurement front-ends to generate timing sequences, gate triggers, and address multiplexers for data-acquisition cards. Its 15 ns tpd comfortably generates pulse trains at 5-10 MHz for general-purpose stimulus, and 84 I/O pins support wide parallel stimulus buses. The 5 V tolerance interfaces directly with TTL comparators and precision ADCs (e.g. AD9220, ADS805), and the JTAG port enables remote logic updates in deployed test systems.

Được đề xuất

EPM7128SLI84-10N · Altera EPM7128SLC84-7N · Intel

Tóm tắt các sản phẩm được đề xuất

What is the EPM7128SLI84-15?

The EPM7128SLI84-15 is a 128-macrocell EE PLD (electrically-erasable programmable logic device, i.e. a CPLD) from the Altera/Intel MAX 7000 family. According to Altera datasheets and Microchip USA, it provides 15 ns pin-to-pin propagation delay, 84 PLCC pins, and in-system programmability through JTAG. It operates from a single 4.5 V to 5.5 V supply, with configurable 3.3 V or 5 V I/O.

How many macrocells does EPM7128SLI84-15 have?

The EPM7128SLI84-15 contains 128 macrocells, the largest density in the MAX 7000S family. Per Microchip USA, each macrocell provides a programmable AND/OR array with a configurable flip-flop. With 128 macrocells the device can implement equivalent gates in the 2,500-range, suitable for bus decoding and complex glue logic.

What is the propagation delay of EPM7128SLI84-15?

The EPM7128SLI84-15 has a 15 ns pin-to-pin propagation delay (tpd) at the slowest speed grade for industrial temperature parts. The MAX 7000 family uses tpd in the part number suffix: -15 = 15 ns, -10 = 10 ns, -7 = 7.5 ns, -6 = 6 ns. For higher-speed designs consider the EPM7128SLC84-10 or EPM7128SLC84-7N variants.

What package does EPM7128SLI84-15 use?

The EPM7128SLI84-15 ships in an 84-pin Plastic Leaded Chip Carrier (PLCC-84) with J-bend leads, per Altera package code 'QCCJ'. The '84' in the part number indicates the PLCC-84 package; 'SLC84' variants are commercial-grade while 'SLI84' is industrial-grade (-40 C to +85 C).

What is the difference between EPM7128SLI84-15 and EPM7128SLI84-10?

Both parts share the same 128-macrocell MAX 7000S die and PLCC-84 industrial-grade package. The only difference is propagation delay: the -15 variant has 15 ns tpd, while the -10 has 10 ns tpd. The -10 is a faster drop-in replacement that improves timing margins but may cost slightly more; functionally they are interchangeable in any design where 15 ns timing is acceptable.

What is the difference between EPM7128SLI84-15 and EPM7128ELI84-20?

The 'E' prefix in EPM7128ELI84-20 denotes the MAX 7000E (enhanced) architecture, which adds JTAG support for in-system programming and boundary-scan testing. The EPM7128SLI84-15 is the original MAX 7000S (with separate programmer pinout). The E variant has 20 ns tpd in this case but adds ISP/JTAG, while the S variant requires an Altera MasterBlaster or ByteBlaster programmer.

Where to buy EPM7128SLI84-15 online?

The EPM7128SLI84-15 is an obsolete Altera/Intel part, so it is not stocked in large quantities at mainstream distributors. Available sources include secondary-market distributors (Octopart, Veswin, Jotrin, Microchip USA, Chipdigger) and surplus channels, all listed in our verified web data. Pricing varies widely with availability; as of 2026-09-13, qty-1 distributor pricing is approximately 14.50 USD.

What is the price of EPM7128SLI84-15?

Pricing for EPM7128SLI84-15 reflects its obsolete status and limited stock. As of 2026-09-13, indicative distributor pricing in the secondary market is approximately 14.50 USD at qty 1, 10.95 USD at qty 100, and 8.40 USD at qty 1000. Quoted prices may differ across vendors and lot date codes - always request a quote for current pricing.

What is the lead time for EPM7128SLI84-15?

Because EPM7128SLI84-15 is obsolete, lead time is not guaranteed and varies by distributor inventory. Secondary-market distributors such as Veswin and Jotrin list in-stock inventory but with no factory lead time. Expect 2-6 weeks for confirmed stock and 8-12 weeks for harder-to-find lot codes; always check current stock via Octopart or distributor websites before committing to a design.

Is EPM7128SLI84-15 in stock?

EPM7128SLI84-15 is in limited, variable stock only at secondary-market distributors because the part is obsolete (no longer manufactured by Altera/Intel). Distributors like Veswin, Jotrin, and Microchip USA advertise the part but quantities fluctuate. We recommend checking current stock at Octopart, which aggregates availability across multiple distributors.

EPM7128SLI84-15 vs EPM7128SLC84-15 - which is better?

The EPM7128SLI84-15 (industrial temperature) is better for designs that must operate across -40 C to +85 C, while the EPM7128SLC84-15 (commercial, 0 C to +70 C) is sufficient for office- or rack-temperature environments. Both share identical 15 ns tpd, 128 macrocells, and PLCC-84 pinout - they are true drop-in replacements differing only in operating temperature range.

What is the best drop-in replacement for EPM7128SLI84-15?

The best drop-in replacement is EPM7128SLI84-10N (also on the MAX 7000S die, same PLCC-84 industrial-grade package) if your design tolerates a slightly higher cost for 10 ns tpd timing margin. Within the same family, the EPM7128SLC84-15N offers the same 128 macrocells and 15 ns tpd in the commercial temperature grade, suitable for indoor applications.

Can EPM7128SLC84-15N replace EPM7128SLI84-15?

The EPM7128SLC84-15N replaces EPM7128SLI84-15 in any commercial-temperature (0 C to +70 C) design because both share the 128-macrocell MAX 7000S die, 15 ns tpd, and PLCC-84 footprint. The N suffix adds a Pb-free finish. However, EPM7128SLC84-15N is NOT a direct drop-in for designs that operate below 0 C, where the industrial SLI84-15 must be retained.

Where to download the EPM7128SLI84-15 datasheet PDF?

The EPM7128SLC84-15 datasheet (66-page document) is publicly available at AllDatasheet.com and is functionally identical to the EPM7128SLI84-15 except for operating temperature. The original Altera MAX 7000 family datasheet PDF covers the SLI84-15 electrical characteristics and is referenced via Findchips, Jotrin, and FPGAkey - search 'MAX 7000 datasheet Altera' to retrieve the latest revision.

Where can I find the EPM7128SLI84-15 pinout?

The pinout of EPM7128SLI84-15 follows the Altera MAX 7000 PLCC-84 standard: pin 1 is the input/GCLK1, pins 2-12 are I/O banks, with dedicated JTAG pins (TDI, TDO, TMS, TCK) and global clear/clock pins arranged per the MAX 7000 datasheet. Pin numbering follows standard PLCC convention: pin 1 at top-left, counter-clockwise around the package. Refer to the MAX 7000 family datasheet for the complete pin table.

Dữ liệu tham khảo kỹ thuật cho EPM7128SLI84-15 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the EPM7128SLI84-15 when designing 5 V industrial glue logic that must operate across -40 C to +85 C with deterministic 15 ns timing - such as legacy bus address decoding, peripheral bridging, or industrial control state machines. For new designs where JTAG in-system programming is required, prefer the EPM7128ELI84-20 (MAX 7000E) over the 'S' variant. For tighter timing budgets upgrade to EPM7128SLI84-10N (10 ns) at slight cost premium. For commercial-temperature indoor equipment use EPM7128SLC84-15N as a drop-in replacement. For completely new designs consider MAX II (EPM240, EPM570) or MAX V CPLDs as modern replacements with the same MAX 7000 design flow but lower cost.

So sánh với các sản phẩm thay thế

Tham số	Sản phẩm này	EPM7128SLI84-10N	EPM7128SLC84-15	EPM7128SLC84-15N	EPM7128SLI84-10	EPM7128SLC84-10
Package	PLCC-84 (J-lead)	PLCC-84 (J-lead) - same	PLCC-84 (J-lead) - same	PLCC-84 (J-lead) - same	PLCC-84 (J-lead) - same	PLCC-84 (J-lead) - same
Brand	Intel (formerly Altera)	Intel	Intel	Intel	Intel	Intel
Macrocells	128	128	128	128	128	128
Propagation Delay (tpd)	15 ns	10 ns (faster)	15 ns	15 ns	10 ns (faster)	10 ns (faster)
Operating Temperature	-40 C to +85 C (Industrial)	-40 C to +85 C (Industrial)	0 C to +70 C (Commercial)	0 C to +70 C (Commercial)	-40 C to +85 C (Industrial)	0 C to +70 C (Commercial)
Pb-free Finish (N suffix)	No (SnPb finish)	Yes	No	Yes	No	No
Architecture	MAX 7000S	MAX 7000S	MAX 7000S	MAX 7000S	MAX 7000S	MAX 7000S
Supply Voltage	4.5 V to 5.5 V	4.5 V to 5.5 V	4.5 V to 5.5 V	4.5 V to 5.5 V	4.5 V to 5.5 V	4.5 V to 5.5 V
I/O Standards	3.3 V / 5 V configurable	3.3 V / 5 V configurable	3.3 V / 5 V configurable	3.3 V / 5 V configurable	3.3 V / 5 V configurable	3.3 V / 5 V configurable

Bảo phân biệt quan trọng

Largest macrocell density in MAX 7000S family (vsEPM7064SLC44 (smaller MAX 7000S member))
15 ns tpd at industrial temperature grade (vsEPM7128SLC84-15 (commercial temperature))
In-system reprogrammable EEPROM (vsDiscrete 74LS/74F TTL glue logic)

Ghi chú thiết kế

The EPM7128SLI84-15 PLCC-84 socket should be a low-profile through-hole type if field upgrades are expected (Altera recommends AMP 1-822473-1 or equivalent). Place at least four 0.1 uF decoupling capacitors near the VCCINT pins (1, 13, 26, 39, 52, 65, 78) and tie all GND pins to a continuous ground plane. Keep JTAG pins (TDI/TDO/TMS/TCK) away from high-speed clocks to avoid noise injection during boundary-scan testing.

Use series termination (33-68 ohm) on high-speed outputs (>50 MHz toggle rate) to dampen reflections on PLCC-84 stub traces. Configure I/O pins as slow-slew-rate when driving capacitive loads to reduce ground bounce. Avoid routing adjacent I/O pins as differential pairs without ground shielding, since PLCC-84 has higher mutual inductance than TQFP packages.

Do not confuse the EPM7128SLI84-15 (MAX 7000S, requires Altera MasterBlaster/ByteBlaster programmer) with the EPM7128ELI84-20 (MAX 7000E, supports JTAG ISP). Both share the same PLCC-84 pinout but use different programming flows - the S variant needs an external programmer while the E variant uses JTAG. Verify the BSDL file matches the specific die revision when designing boundary-scan tests.

Thông tin tuân thủ

RoHS

Unknown

REACH

Unknown

AEC-Q100

Not Applicable

Không chì

Không halogen

Unknown

Khoáng vật xung đột

Unknown

Original Altera/Intel MAX 7000 family parts (pre-2006) were typically Pb-containing finishes. RoHS/REACH compliance is unknown for this specific lot; consult the lot date code and original shipping documentation. Not AEC-Q100 qualified (industrial-grade, not automotive).

Dữ liệu được xác minh vào: 2026-09-13 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Nguồn: Distributor, Octopart, Distributor, Distributor, Distributor, Distributor, Manufacturer Datasheet

Tìm kiếm liên quan

EPM7128SLI84-15 EPM7128SLI84-15 datasheet EPM7128SLI84-15 price Altera MAX 7000 CPLD 128 macrocell CPLD PLCC-84 EPM7128SLI84-15 pinout EPM7128SLI84-15 vs EPM7128SLC84-15 EPM7128SLI84-15 replacement 15 ns CPLD 5 V industrial obsolete Altera CPLD cross reference MAX 7000S PLCC-84 128 macrocell what is a CPLD used for EPM7128 industrial temperature grade buy EPM7128SLI84-15 in stock EPM7128 JTAG programming

Các bộ phận và thuật ngữ liên quan

Intel Altera EPM7128SLI84-15 EPM7128SLI84-10N EPM7128SLC84-15 EPM7128SLC84-15N MAX 7000 MAX 7000S CPLD EE PLD complex programmable logic device programmable logic device (PLD) macrocell PLCC-84 Plastic Leaded Chip Carrier J-lead JTAG IEEE 1149.1 BSDL in-system programming EEPROM 5 V TTL 3.3 V CMOS industrial temperature grade AEC-Q100 (not applicable) RoHS REACH Altera MasterBlaster ByteBlaster

EPM9320LI84-20N

Altera

Yêu cầu báo giá