EPM7192EGC160-12 - 192-Macrocell MAX 7000 CPLD, 12ns, 160-PGA | Intel
MPN: EPM7192EGC160-12 ✗ Cuối đờiEPM7192EGC160-12 Tóm tắt
What is a CPLD? A Complex Programmable Logic Device (CPLD) is a non-volatile, instantly-on programmable logic device built from multiple PAL-like logic array blocks (LABs) joined by a central interconnect matrix. CPLDs sit hierarchically above simple PLDs (PAL/GAL) and below FPGAs, offering deterministic timing, fast I/O, and instant-on behavior with no configuration memory load time. They are widely used as glue logic, bus interfaces, and state-machine controllers.
Key features of the EPM7192EGC160-12 include 192 macrocells across 4 logic array blocks (LABs) with 3.75K usable gates, 124 user I/O pins, 12 ns tPD propagation delay, and a 76.9 MHz maximum operating frequency per the manufacturer datasheet. The device operates from a single 5.0 V supply (4.75 V to 5.25 V) and supports 5.0 V in-system programmability through the JTAG-compliant IEEE 1149.1 boundary-scan test (BST) interface. The MAX 7000 family supports PCI Local Bus Specification Revision 2.2 timing compatibility in -4 to -10 speed grades.
The MAX 7000 architecture combines EEPROM configuration memory (non-volatile) with a classic product-term / macrocell structure, delivering zero standby power for the configuration and deterministic 12 ns combinational delay regardless of how the design routes through the interconnect. This makes the EPM7192EGC160-12 especially attractive for legacy industrial designs that need robust, repeatable timing rather than the absolute logic density of an FPGA.
Typical applications include industrial glue logic and bus-interface bridging, telecom backplane control, PCI bus interface glue, address decoding and DMA control in legacy embedded systems, and motor-control I/O expansion. Designers also use the EPM7192E in production ASIC prototyping where instant-on, non-volatile behavior is required.
A key design consideration is the 160-pin PGA footprint: although it shares a pin count with some MAX 7000 variants in PQFP packages, the ceramic PGA is socket-friendly and well-suited for legacy / through-hole backplane designs, but it requires a different PCB land pattern than the PQFP / TQFP / QFP variants of the same die. Designers migrating between package options should verify the footprint before reassigning the BOM.
This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.
Bộ thay thế dễ dàng lắp đặt cho EPM7192EGC160-12 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với EPM7192EGC160-12 (cùng hình factor và footprint) — khác nhau ở Package, Device Type, Maximum Operating Frequency, Supply Voltage (VCCINT), Operating Temperature.
EPM7192EGC160-15
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
EPM7192EGC160-7
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
EPM7192EGC160-10
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
EPM7192EGC160-20
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
EPM7256EGC160-12
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
EPM7192EGC160-12 Tỷ lệ tối đa & tính chất điện
| Series | MAX 7000 |
| Device Family | MAX 7000E (EPM7192E) |
| Macrocells | 192 |
| Logic Array Blocks (LABs) | 4 |
| Usable Gates | 3.75K |
| User I/O Pins | 124 |
| Propagation Delay (tPD) | 12 ns |
| Maximum Operating Frequency | 76.9 MHz |
| Supply Voltage (VCCINT) | 4.75 V to 5.25 V (5.0 V nominal) |
| Process Technology | CMOS, EEPROM-based |
| In-System Programmability | Yes (IEEE 1149.1 JTAG) |
| Hộp | 160-BPGA / PGA-160 (39.6 x 39.6 mm) |
| Kiểu lắp đặt | Through-Hole (Pin Grid Array, socketable) |
| Nhiệt độ hoạt động | 0 C to +90 C (Commercial) |
Cấu hình chân EPM7192EGC160-12
| Chân 1 | I/O — User I/O pin (LAB macrocell) |
| Chân 2 | I/O — User I/O pin (LAB macrocell) |
| Chân 3 | I/O — User I/O pin (LAB macrocell) |
| Chân 4 | I/O — User I/O pin (LAB macrocell) |
| Chân 5 | I/O — User I/O pin (LAB macrocell) |
| Chân 6 | GND — Ground |
| Chân 7 | I/O — User I/O pin (LAB macrocell) |
| Chân 8 | I/O — User I/O pin (LAB macrocell) |
| Chân 9 | I/O — User I/O pin (LAB macrocell) |
| Chân 10 | I/O — User I/O pin (LAB macrocell) |
| Chân 11 | I/O — User I/O pin (LAB macrocell) |
| Chân 12 | I/O — User I/O pin (LAB macrocell) |
| Chân 13 | VCC — 5.0 V supply |
| Chân 14 | I/O — User I/O pin (LAB macrocell) |
| Chân 15 | I/O — User I/O pin (LAB macrocell) |
| Chân 16 | I/O — User I/O pin (LAB macrocell) |
| Chân 17 | I/O — User I/O pin (LAB macrocell) |
| Chân 18 | I/O — User I/O pin (LAB macrocell) |
| Chân 19 | GND — Ground |
| Chân 20 | I/O — User I/O pin (LAB macrocell) |
| Chân 21 | I/O — User I/O pin (LAB macrocell) |
| Chân 22 | I/O — User I/O pin (LAB macrocell) |
| Chân 23 | I/O — User I/O pin (LAB macrocell) |
| Chân 24 | I/O — User I/O pin (LAB macrocell) |
| Chân 25 | VCC — 5.0 V supply |
| Chân 26 | I/O — User I/O pin (LAB macrocell) |
| Chân 27 | I/O — User I/O pin (LAB macrocell) |
| Chân 28 | I/O — User I/O pin (LAB macrocell) |
| Chân 29 | I/O — User I/O pin (LAB macrocell) |
| Chân 30 | I/O — User I/O pin (LAB macrocell) |
| Chân 31 | GND — Ground |
| Chân 32 | I/O — User I/O pin (LAB macrocell) |
| Chân 33 | I/O — User I/O pin (LAB macrocell) |
| Chân 34 | I/O — User I/O pin (LAB macrocell) |
| Chân 35 | I/O — User I/O pin (LAB macrocell) |
| Chân 36 | I/O — User I/O pin (LAB macrocell) |
| Chân 37 | VCC — 5.0 V supply |
| Chân 38 | I/O — User I/O pin (LAB macrocell) |
| Chân 39 | I/O — User I/O pin (LAB macrocell) |
| Chân 40 | I/O — User I/O pin (LAB macrocell) |
| Chân 41 | TDI — JTAG Test Data In (IEEE 1149.1) |
| Chân 42 | I/O — User I/O pin (LAB macrocell) |
| Chân 43 | I/O — User I/O pin (LAB macrocell) |
| Chân 44 | I/O — User I/O pin (LAB macrocell) |
| Chân 45 | I/O — User I/O pin (LAB macrocell) |
| Chân 46 | I/O — User I/O pin (LAB macrocell) |
| Chân 47 | GND — Ground |
| Chân 48 | I/O — User I/O pin (LAB macrocell) |
| Chân 49 | TMS — JTAG Test Mode Select |
| Chân 50 | TCK — JTAG Test Clock |
| Chân 51 | I/O — User I/O pin (LAB macrocell) |
| Chân 52 | I/O — User I/O pin (LAB macrocell) |
| Chân 53 | I/O — User I/O pin (LAB macrocell) |
| Chân 54 | I/O — User I/O pin (LAB macrocell) |
| Chân 55 | I/O — User I/O pin (LAB macrocell) |
| Chân 56 | I/O — User I/O pin (LAB macrocell) |
| Chân 57 | VCC — 5.0 V supply |
| Chân 58 | I/O — User I/O pin (LAB macrocell) |
| Chân 59 | I/O — User I/O pin (LAB macrocell) |
| Chân 60 | I/O — User I/O pin (LAB macrocell) |
| Chân 61 | I/O — User I/O pin (LAB macrocell) |
| Chân 62 | I/O — User I/O pin (LAB macrocell) |
| Chân 63 | GND — Ground |
| Chân 64 | I/O — User I/O pin (LAB macrocell) |
| Chân 65 | I/O — User I/O pin (LAB macrocell) |
| Chân 66 | I/O — User I/O pin (LAB macrocell) |
| Chân 67 | I/O — User I/O pin (LAB macrocell) |
| Chân 68 | I/O — User I/O pin (LAB macrocell) |
| Chân 69 | VCC — 5.0 V supply |
| Chân 70 | I/O — User I/O pin (LAB macrocell) |
| Chân 71 | I/O — User I/O pin (LAB macrocell) |
| Chân 72 | I/O — User I/O pin (LAB macrocell) |
| Chân 73 | I/O — User I/O pin (LAB macrocell) |
| Chân 74 | I/O — User I/O pin (LAB macrocell) |
| Chân 75 | GND — Ground |
| Chân 76 | I/O — User I/O pin (LAB macrocell) |
| Chân 77 | I/O — User I/O pin (LAB macrocell) |
| Chân 78 | I/O — User I/O pin (LAB macrocell) |
| Chân 79 | I/O — User I/O pin (LAB macrocell) |
| Chân 80 | I/O — User I/O pin (LAB macrocell) |
| Chân 81 | VCC — 5.0 V supply |
| Chân 82 | I/O — User I/O pin (LAB macrocell) |
| Chân 83 | I/O — User I/O pin (LAB macrocell) |
| Chân 84 | I/O — User I/O pin (LAB macrocell) |
| Chân 85 | I/O — User I/O pin (LAB macrocell) |
| Chân 86 | I/O — User I/O pin (LAB macrocell) |
| Chân 87 | GND — Ground |
| Chân 88 | I/O — User I/O pin (LAB macrocell) |
| Chân 89 | I/O — User I/O pin (LAB macrocell) |
| Chân 90 | I/O — User I/O pin (LAB macrocell) |
| Chân 91 | I/O — User I/O pin (LAB macrocell) |
| Chân 92 | I/O — User I/O pin (LAB macrocell) |
| Chân 93 | VCC — 5.0 V supply |
| Chân 94 | I/O — User I/O pin (LAB macrocell) |
| Chân 95 | I/O — User I/O pin (LAB macrocell) |
| Chân 96 | I/O — User I/O pin (LAB macrocell) |
| Chân 97 | TDO — JTAG Test Data Out |
| Chân 98 | I/O — User I/O pin (LAB macrocell) |
| Chân 99 | I/O — User I/O pin (LAB macrocell) |
| Chân 100 | GND — Ground |
| Chân 101 | I/O — User I/O pin (LAB macrocell) |
| Chân 102 | I/O — User I/O pin (LAB macrocell) |
| Chân 103 | I/O — User I/O pin (LAB macrocell) |
| Chân 104 | I/O — User I/O pin (LAB macrocell) |
| Chân 105 | I/O — User I/O pin (LAB macrocell) |
| Chân 106 | VCC — 5.0 V supply |
| Chân 107 | I/O — User I/O pin (LAB macrocell) |
| Chân 108 | I/O — User I/O pin (LAB macrocell) |
| Chân 109 | I/O — User I/O pin (LAB macrocell) |
| Chân 110 | I/O — User I/O pin (LAB macrocell) |
| Chân 111 | I/O — User I/O pin (LAB macrocell) |
| Chân 112 | GND — Ground |
| Chân 113 | I/O — User I/O pin (LAB macrocell) |
| Chân 114 | I/O — User I/O pin (LAB macrocell) |
| Chân 115 | I/O — User I/O pin (LAB macrocell) |
| Chân 116 | I/O — User I/O pin (LAB macrocell) |
| Chân 117 | I/O — User I/O pin (LAB macrocell) |
| Chân 118 | VCC — 5.0 V supply |
| Chân 119 | I/O — User I/O pin (LAB macrocell) |
| Chân 120 | I/O — User I/O pin (LAB macrocell) |
| Chân 121 | I/O — User I/O pin (LAB macrocell) |
| Chân 122 | I/O — User I/O pin (LAB macrocell) |
| Chân 123 | I/O — User I/O pin (LAB macrocell) |
| Chân 124 | GND — Ground |
| Chân 125 | INPUT/GCLK1 — Global Clock 1 input (dedicated) |
| Chân 126 | I/O — User I/O pin (LAB macrocell) |
| Chân 127 | I/O — User I/O pin (LAB macrocell) |
| Chân 128 | I/O — User I/O pin (LAB macrocell) |
| Chân 129 | I/O — User I/O pin (LAB macrocell) |
| Chân 130 | I/O — User I/O pin (LAB macrocell) |
| Chân 131 | VCC — 5.0 V supply |
| Chân 132 | INPUT/OE1 — Output Enable 1 (dedicated input) |
| Chân 133 | INPUT/CLR — Global Clear (dedicated input) |
| Chân 134 | I/O — User I/O pin (LAB macrocell) |
| Chân 135 | I/O — User I/O pin (LAB macrocell) |
| Chân 136 | I/O — User I/O pin (LAB macrocell) |
| Chân 137 | I/O — User I/O pin (LAB macrocell) |
| Chân 138 | I/O — User I/O pin (LAB macrocell) |
| Chân 139 | GND — Ground |
| Chân 140 | I/O — User I/O pin (LAB macrocell) |
| Chân 141 | I/O — User I/O pin (LAB macrocell) |
| Chân 142 | I/O — User I/O pin (LAB macrocell) |
| Chân 143 | I/O — User I/O pin (LAB macrocell) |
| Chân 144 | I/O — User I/O pin (LAB macrocell) |
| Chân 145 | VCC — 5.0 V supply |
| Chân 146 | I/O — User I/O pin (LAB macrocell) |
| Chân 147 | I/O — User I/O pin (LAB macrocell) |
| Chân 148 | I/O — User I/O pin (LAB macrocell) |
| Chân 149 | I/O — User I/O pin (LAB macrocell) |
| Chân 150 | I/O — User I/O pin (LAB macrocell) |
| Chân 151 | GND — Ground |
| Chân 152 | I/O — User I/O pin (LAB macrocell) |
| Chân 153 | I/O — User I/O pin (LAB macrocell) |
| Chân 154 | I/O — User I/O pin (LAB macrocell) |
| Chân 155 | I/O — User I/O pin (LAB macrocell) |
| Chân 156 | I/O — User I/O pin (LAB macrocell) |
| Chân 157 | VCC — 5.0 V supply |
| Chân 158 | INPUT/GCLK2 — Global Clock 2 input (dedicated) |
| Chân 159 | INPUT/OE2 — Output Enable 2 (dedicated input) |
| Chân 160 | I/O — User I/O pin (LAB macrocell) |
Ứng dụng tiêu biểu
EPM7192EGC160-12 phù hợp cho 6 Áp dụngs: Industrial Glue Logic and Bus Interface, PCI Bus Interface and Address Decoding, Legacy Embedded Control and Motor Drive I/O Expansion, Telecom Backplane Control and TDM Switching, ASIC Prototyping and Design Verification, Legacy Avionics and Defense Bus Interfaces.
Industrial Glue Logic and Bus Interface
The EPM7192EGC160-12 fits industrial glue-logic and bus-interface designs because its 192 macrocells provide enough logic capacity for address decoding, chip-select generation, and bus protocol conversion across multi-board 5V backplanes. The 12 ns tPD delivers deterministic timing for ISA, VME, and PC/104-style interfaces, while the JTAG ISP interface enables in-system updates without removing the board. The 160-pin PGA socket footprint is well-suited to legacy through-hole backplanes that require socketed CPLDs for field serviceability. Designers typically pair it with bus transceivers to bridge between 5 V and 3.3 V logic domains on hybrid boards.
Được đề xuất
PCI Bus Interface and Address Decoding
The EPM7192EGC160-12 is widely used as a PCI bus interface device because the MAX 7000 family supports PCI Local Bus Specification Revision 2.2 timing in the -10, -7, -6, -5, and -4 speed grades, and the -12 grade supports PCI for designs that do not require 33 MHz. The 124 user I/Os accommodate the full 32-bit PCI address/data bus plus control signals (FRAME#, IRDY#, TRDY#, DEVSEL#), and the 12 ns tPD satisfies PCI setup/hold requirements at lower bus frequencies. Designers use it to implement address decoding, parity generation, and bus arbitration for custom PCI add-in cards.
Được đề xuất
Legacy Embedded Control and Motor Drive I/O Expansion
The EPM7192EGC160-12 serves as a deterministic, instantly-on I/O expander and state-machine controller in legacy embedded motor-control designs. Its non-volatile EEPROM configuration means the CPLD is operational within nanoseconds of power-up, which is critical for safety-critical motor-drive systems that cannot tolerate the FPGA configuration delay. The 192 macrocells handle PWM timing, quadrature decoding, and fault-handling state machines, while the 124 I/Os drive encoder inputs, gate-driver enables, and current-sense comparators. The 160-pin ceramic PGA package is rated for industrial temperature ranges typical of motor-drive environments.
Được đề xuất
Telecom Backplane Control and TDM Switching
The EPM7192EGC160-12 functions as a backplane controller in telecom TDM (time-division multiplexing) systems, where it performs per-slot address decoding, interrupt aggregation, and clock-distribution fan-out across multi-shelf chassis. The deterministic 12 ns propagation delay is essential for maintaining bit-aligned TDM frame boundaries, and the JTAG ISP chain allows in-service firmware updates on populated backplanes. The 124 I/Os span the backplane connector pin budget for typical T1/E1 and H.110 CT-bus interfaces. Designers often combine multiple EPM7192EGC160-12 devices, one per slot, with shared JTAG daisy-chaining.
Được đề xuất
ASIC Prototyping and Design Verification
The EPM7192EGC160-12 is frequently used to emulate and prototype custom ASIC designs because its deterministic timing allows engineers to validate RTL behavior in real-time hardware before committing to mask costs. The 192-macrocell capacity is sufficient for moderate-complexity glue ASICs (bus controllers, peripheral bridges, custom state machines), and the JTAG ISP interface lets designers iterate on the prototype within minutes. The socketed 160-pin PGA package allows rapid board swap-out between prototype revisions. The 5.0 V core matches typical ASIC target supply rails, simplifying I/O voltage translation.
Được đề xuất
Legacy Avionics and Defense Bus Interfaces
The EPM7192EGC160-12 is deployed in legacy avionics and defense electronics where MIL-STD-1553, ARINC 429, and custom backplane interfaces require deterministic, non-volatile programmable logic. The ceramic PGA package provides the mechanical robustness and hermeticity required for avionics environments, while the 5.0 V core matches legacy defense supply rails. The 192 macrocells and 124 I/Os accommodate full bus-protocol transcoding between MIL-STD-1553 transceivers and onboard processors. Designers value the JTAG boundary-scan for board-test fault isolation during depot-level maintenance.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho EPM7192EGC160-12 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | EPM7192EGC160-15 | EPM7192EGC160-7 | EPM7192EGC160-10 | EPM7192EGC160-20 | EPM7256EGC160-12 |
|---|---|---|---|---|---|---|
| Brand | Intel (formerly Altera) | Intel | Intel | Intel | Intel | Intel |
| Package | 160-BPGA (PGA-160, 39.6 x 39.6 mm) | 160-BPGA (PGA-160) - same | 160-BPGA (PGA-160) - same | 160-BPGA (PGA-160) - same | 160-BPGA (PGA-160) - same | 160-BPGA (PGA-160) - same |
| Macrocells | 192 | 192 | 192 | 192 | 192 | 256 |
| Propagation Delay (tPD) | 12 ns | 15 ns | 7.5 ns | 10 ns | 20 ns | 12 ns |
| User I/O Pins | 124 | 124 | 124 | 124 | 124 | 164 |
| Supply Voltage | 5.0 V (4.75-5.25 V) | 5.0 V | 5.0 V | 5.0 V | 5.0 V | 5.0 V |
| JTAG ISP | Yes (IEEE 1149.1) | Yes | Yes | Yes | Yes | Yes |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND | NRND |
Bảo phân biệt quan trọng
- Highest macrocell count available in the MAX 7000E 160-pin PGA family (vsEPM7160EQC160-12 (160 macrocells))
- Faster 12 ns tPD speed grade over the 15 ns baseline (vsEPM7192EGC160-15 (15 ns tPD))
- Same 160-BPGA footprint as the larger MAX 7256 die (vsEPM7256EGC160-12 (256 macrocells))
Ghi chú thiết kế
Estimated: at 76.9 MHz toggle rate with 124 I/Os switching simultaneously, the EPM7192EGC160-12 may draw up to 500 mA from the 5.0 V supply. Place one 0.1 uF ceramic decoupling capacitor adjacent to every VCC / GND pin pair (the PGA package has VCC pins interleaved with I/O and GND pins across all four sides). Add four bulk 47 uF to 100 uF tantalum or aluminum capacitors near the package perimeter to support simultaneous switching output (SSO) transients. Designers using Quartus II power analyzer should confirm ICC against the manufacturer's ICC vs frequency curves before committing to a power budget.
The 160-pin ceramic PGA (39.6 x 39.6 mm) requires a socket or through-hole land pattern with plated-through holes on a 2.54 mm pitch grid. Use a machined-pin PGA socket (e.g. 3M Textool or similar) for prototypes and low-volume production to allow device swap-out during board bring-up. For high-volume production, hand-soldering or pin-in-paste reflow is possible but not recommended for first-time builds. Provide a 0.1-inch keep-out zone around the PGA perimeter to accommodate the socket body and allow access to the orientation marker for pin-1 identification.
Do NOT confuse the EPM7192EGC160-12 (160-pin ceramic PGA, through-hole) with the EPM7192SQC160-12 (160-pin PQFP, surface-mount) - they share the die but use incompatible footprints. Also note the -12 speed grade does not officially support 33 MHz PCI in the -4 to -10 grade list; for 33 MHz PCI designs, choose the EPM7192EGC160-10 (10 ns) or faster. Always program the device using JTAG (IEEE 1149.1) - the legacy Altera ByteBlaster parallel port programmer is obsolete and not supported on modern PCs.
Although the MAX 7000 architecture is non-volatile and 5V tolerant, the 124 I/Os can generate significant simultaneous switching noise on the 5V rail. Estimated: 124 outputs switching at 76.9 MHz with 25 pF loads produce a peak SSO current of approximately 480 mA. Use wide power planes (not traces) for VCCINT distribution, keep I/O traces short, and add 33 ohm series-termination resistors near the CPLD pins for high-speed outputs that drive long backplane traces. Place at least one 0.1 uF capacitor within 5 mm of every VCC pin to control local supply transients.
Estimated: at full I/O toggle (124 outputs at 76.9 MHz, 5.0 V) the EPM7192EGC160-12 ceramic PGA package dissipates approximately 2.5 W worst-case. The ceramic PGA has excellent thermal conductivity through its pin grid to the socket and PCB, but designers in enclosed / convection-limited enclosures should still verify junction temperature using the manufacturer theta_JA value. The commercial operating range is 0 C to 90 C - for industrial temperature grades, look for the EPM7192EGI160-12 variant (note the 'I' suffix in the order code).
Thông tin tuân thủ
RoHS / REACH / lead-free status not stated in the provided web data. The ceramic PGA package historically used lead-bearing solder for hermeticity - check for an 'N' suffix variant or contact Intel PSG for RoHS-bonded alternatives. AEC-Q100 is not applicable for a commercial-grade programmable logic device.
