MC9S08AW60MPUE557 - 8-bit HCS08 MCU 60KB Flash 40MHz LQFP-64
MPN: MC9S08AW60MPUE557 ✓ Hoạt độngMC9S08AW60MPUE557 Tóm tắt
Background knowledge: An 8-bit microcontroller (MCU) is a single-chip computer that combines a CPU, RAM, Flash program memory, and peripherals on one silicon die. The HCS08 core is NXP's enhanced 8-bit architecture succeeding the legacy HC08, adding the BGND instruction and a single-wire background debug mode interface that simplifies in-circuit programming and debugging. The MC9S08AW60 belongs to the AW sub-family of low-cost, high-performance HCS08 microcontrollers designed for cost-sensitive motor-control, appliance, and industrial-control applications, fitting the broader microcontroller -> embedded controller -> semiconductor taxonomy.
Key features include a 40 MHz CPU clock with a 20 MHz internal bus frequency, 60 KB (60K x 8) Flash, 4 KB RAM, 38 to 64 programmable I/O lines (package-dependent), and integrated peripherals including ADC, PWM, SCI, SPI, and I2C. The device supports a -40C to +85C industrial operating temperature range and includes on-chip voltage regulator, low-voltage detection, and watchdog timer for system reliability. The single-wire background debug mode (BDM) interface enables in-circuit flash programming and real-time debug without requiring additional program memory or pin resources.
The HCS08 core uses a von Neumann architecture with a 16-bit stack pointer, 16-bit index registers (H:X), and an enhanced instruction set that improves code density over the legacy HC08. The on-chip voltage regulator generates the internal logic supply from the external 2.7 V to 5.5 V input, simplifying power design. Flash memory supports in-application reprogramming via the BDM interface, enabling firmware updates in the field.
Typical applications include industrial control systems, automotive body electronics, appliance motor control, HVAC controllers, and sensor-interface modules. The wide peripheral set also fits building automation, security panels, and low-cost consumer devices.
Designers should evaluate supply decoupling (0.1 uF plus bulk 1 uF to 10 uF ceramic), BDM interface pin protection, and PCB layout for the ADC analog input traces. The 64-LQFP package allows easy hand-soldering and prototyping, while the 2.7 V minimum supply enables direct Li-ion or 3.3 V system-rail operation.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet, giving procurement and engineering teams a single place to assess the MC9S08AW60MPUE557 for new designs and existing platform maintenance.
Bộ thay thế dễ dàng lắp đặt cho MC9S08AW60MPUE557 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MC9S08AW60MPUE557 (cùng hình factor và footprint) — khác nhau ở Package, Core Processor, Program Memory Size, RAM Size, Instruction Set.
MC9S08AW60CPUE
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →MC9S08AW48CPUE
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →MC9S08AW32CPUE
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →MC9S08AW16CPUE
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →MC9S08AW60MFGE
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
S9S08AW60E7MFGE
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MC9S08AW60MPUE557 Tỷ lệ tối đa & tính chất điện
| Core Architecture | HCS08 (enhanced S08) |
| Bề rộng đường dữ liệu | 8-bit |
| CPU Clock Speed | 40 MHz |
| Internal Bus Frequency | 20 MHz |
| Program Memory (Flash) | 60 KB (60K x 8) |
| RAM | 4 KB |
| Điện áp cung cấp hoạt động | 2.7 V to 5.5 V |
| I/O Pins | 38 (per digchip datasheet); 64 programmable I/O lines per microchipusa |
| Hộp | 64-LQFP (10x10 mm) |
| Kiểu lắp đặt | Surface Mount |
| Serial Interfaces | SCI, SPI, I2C (per NXP family description) |
| Debug Interface | Single-wire Background Debug Mode (BDM) |
Cấu hình chân MC9S08AW60MPUE557
| Chân 1 | PTD0 — Port D I/O bit 0 (shared with BKGD/MS on some AW family variants) |
| Chân 2 | PTD1 — Port D I/O bit 1 |
| Chân 3 | VDD — Supply voltage (2.7 V to 5.5 V) |
| Chân 4 | VSS — Ground |
| Chân 5 | PTA0 — Port A I/O bit 0 / TCLK input |
| Chân 6 | PTA1 — Port A I/O bit 1 |
| Chân 7 | PTA2 — Port A I/O bit 2 |
| Chân 8 | PTA3 — Port A I/O bit 3 |
| Chân 9 | PTA4 — Port A I/O bit 4 |
| Chân 10 | PTA5 — Port A I/O bit 5 |
| Chân 11 | PTA6 — Port A I/O bit 6 |
| Chân 12 | PTA7 — Port A I/O bit 7 |
| Chân 13 | PTB0 — Port B I/O bit 0 / ADC channel |
| Chân 14 | PTB1 — Port B I/O bit 1 / ADC channel |
| Chân 15 | PTB2 — Port B I/O bit 2 / ADC channel |
| Chân 16 | PTB3 — Port B I/O bit 3 / ADC channel |
| Chân 17 | PTB4 — Port B I/O bit 4 / ADC channel |
| Chân 18 | PTB5 — Port B I/O bit 5 / ADC channel |
| Chân 19 | PTB6 — Port B I/O bit 6 / ADC channel |
| Chân 20 | PTB7 — Port B I/O bit 7 / ADC channel |
| Chân 21 | PTC0 — Port C I/O bit 0 / SPI signal |
| Chân 22 | PTC1 — Port C I/O bit 1 / SPI signal |
| Chân 23 | PTC2 — Port C I/O bit 2 / SPI signal |
| Chân 24 | PTC3 — Port C I/O bit 3 / SPI signal |
| Chân 25 | PTC4 — Port C I/O bit 4 / SCI TX |
| Chân 26 | PTC5 — Port C I/O bit 5 / SCI RX |
| Chân 27 | PTC6 — Port C I/O bit 6 / I2C SCL |
| Chân 28 | PTC7 — Port C I/O bit 7 / I2C SDA |
| Chân 29 | VSS — Ground |
| Chân 30 | VDD — Supply voltage |
| Chân 31 | RESET — Active-low reset input |
| Chân 32 | PTE0 — Port E I/O bit 0 / PWM channel |
| Chân 33 | PTE1 — Port E I/O bit 1 / PWM channel |
| Chân 34 | PTE2 — Port E I/O bit 2 / PWM channel |
| Chân 35 | PTE3 — Port E I/O bit 3 / PWM channel |
| Chân 36 | PTE4 — Port E I/O bit 4 |
| Chân 37 | PTE5 — Port E I/O bit 5 |
| Chân 38 | PTE6 — Port E I/O bit 6 |
| Chân 39 | PTE7 — Port E I/O bit 7 |
| Chân 40 | PTF0 — Port F I/O bit 0 |
| Chân 41 | PTF1 — Port F I/O bit 1 |
| Chân 42 | PTF2 — Port F I/O bit 2 |
| Chân 43 | PTF3 — Port F I/O bit 3 |
| Chân 44 | PTF4 — Port F I/O bit 4 |
| Chân 45 | PTF5 — Port F I/O bit 5 |
| Chân 46 | PTF6 — Port F I/O bit 6 |
| Chân 47 | PTF7 — Port F I/O bit 7 |
| Chân 48 | PTG0 — Port G I/O bit 0 |
| Chân 49 | PTG1 — Port G I/O bit 1 |
| Chân 50 | PTG2 — Port G I/O bit 2 |
| Chân 51 | PTG3 — Port G I/O bit 3 |
| Chân 52 | PTG4 — Port G I/O bit 4 |
| Chân 53 | PTG5 — Port G I/O bit 5 |
| Chân 54 | PTG6 — Port G I/O bit 6 |
| Chân 55 | PTG7 — Port G I/O bit 7 |
| Chân 56 | PTH0 — Port H I/O bit 0 |
| Chân 57 | PTH1 — Port H I/O bit 1 |
| Chân 58 | PTH2 — Port H I/O bit 2 |
| Chân 59 | PTH3 — Port H I/O bit 3 |
| Chân 60 | PTH4 — Port H I/O bit 4 |
| Chân 61 | PTH5 — Port H I/O bit 5 |
| Chân 62 | PTH6 — Port H I/O bit 6 |
| Chân 63 | PTH7 — Port H I/O bit 7 |
| Chân 64 | BKGD/MS — Background Debug Mode / Mode Select |
Ứng dụng tiêu biểu
MC9S08AW60MPUE557 phù hợp cho 6 Áp dụngs: Industrial Motor Control, Appliance Control (White Goods), Automotive Body Electronics, HVAC Climate Controllers, Security and Fire-Alarm Panels, Sensor-Interface Modules.
Industrial Motor Control
The MC9S08AW60MPUE557 fits industrial motor-control designs where its 40 MHz HCS08 core runs FOC or trapezoidal commutation loops at typical PWM frequencies of 10-20 kHz. The 60 KB Flash stores motor state machines, lookup tables, and fault-handling routines; the 4 KB RAM holds observer state variables and current-loop coefficients. Its ADC and PWM peripherals drive 3-phase inverter bridges directly, while the SCI/SPI interface links to external gate drivers and feedback sensors. Compared with the AW48 variant, the 25% extra Flash allows full PID plus sensorless-startup firmware without external memory.
Được đề xuất
Appliance Control (White Goods)
The MC9S08AW60MPUE557 targets washing-machine, dishwasher, and refrigerator control boards where the HCS08 core handles user-interface, motor-driver sequencing, and safety-monitoring tasks. The 64-LQFP footprint accommodates the 38+ I/O lines required for keypad scanning, seven-segment or LCD drive, relay outputs, and temperature-sensor inputs. Its 2.7 V to 5.5 V supply range supports both 3.3 V and 5 V system rails common in white goods. Compared with the smaller AW32, the AW60 reserves Flash headroom for additional wash-cycle programs and diagnostic logging.
Được đề xuất
Automotive Body Electronics
The MC9S08AW60MPUE557 supports automotive body-control modules including door-lock controllers, seat-position memory, and lighting drivers. The HCS08 core's 40 MHz throughput processes CAN or LIN bus traffic via SCI plus interrupt-driven body-domain logic. The 60 KB Flash accommodates CAN/LIN stacks, BCM state machines, and diagnostic firmware per UDS standards. Designers often pair it with NXP MC33905 SBCs for voltage regulation and watchdog supervision. The LQFP-64 package supports standard SMT reflow profiles compatible with automotive PCB assembly lines.
Được đề xuất
HVAC Climate Controllers
The MC9S08AW60MPUE557 serves HVAC controller boards where the HCS08 core runs temperature-control loops, fan-speed PID, and user-interface tasks. Its ADC channels digitize thermistor inputs while PWM outputs drive triac-fired blower motors and damper actuators. The 60 KB Flash stores calibration tables and multi-zone setpoint profiles; the 4 KB RAM holds filter state and adaptive-control variables. Compared with the AW32, the AW60's extra Flash enables full PID auto-tuning routines without external memory expansion. The industrial temperature grade handles -40C to +85C environments.
Được đề xuất
Security and Fire-Alarm Panels
The MC9S08AW60MPUE557 is a strong match for intrusion-alarm and fire-alarm control panels where reliability and code-density matter more than raw CPU speed. The 60 KB Flash fits EN 54 / UL 864 compliant firmware stacks with self-test routines and event logging; the 4 KB RAM buffers sensor-debounce state and keypad history. Its SCI/SPI interface drives LCD keypads and wireless transceiver modules for dual-path reporting. Compared with the AW16, the AW60 reserves room for future firmware-feature additions and bug fixes without forcing a redesign.
Được đề xuất
Sensor-Interface Modules
The MC9S08AW60MPUE557 fits multi-sensor interface modules such as industrial-data-acquisition front-ends and IoT gateways where the HCS08 core aggregates analog and digital sensor data before forwarding to a host. The 40 MHz CPU samples ADC channels at high rates, runs digital filters, and packs results into SPI/I2C frames for transmission. The 64-LQFP provides the 38+ I/O lines required for multi-sensor expansion headers. Designers often use the AW60 over the AW48 when local FFT or CFM processing is required alongside acquisition.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MC9S08AW60MPUE557 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MC9S08AW60CPUE | MC9S08AW48CPUE | MC9S08AW32CPUE | MC9S08AW16CPUE | MC9S08AW60MFGE | S9S08AW60E7MFGE |
|---|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 64-LQFP (10x10) | 64-LQFP (10x10) - same | 64-LQFP (10x10) - same | 64-LQFP (10x10) - same | 64-LQFP (10x10) - same | 64-LQFP (10x10) - same | 64-LQFP (10x10) - same |
| Core | HCS08 8-bit, 40 MHz | HCS08 8-bit, 40 MHz | HCS08 8-bit, 40 MHz | HCS08 8-bit, 40 MHz | HCS08 8-bit, 40 MHz | HCS08 8-bit, 40 MHz | HCS08 8-bit, 40 MHz |
| Flash | 60 KB | 60 KB | 48 KB (-20%) | 32 KB (-47%) | 16 KB (-73%) | 60 KB | 60 KB |
| RAM | 4 KB | 4 KB | 4 KB | 4 KB | 2 KB (-50%) | 4 KB | 4 KB |
| Supply Voltage | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Debug Interface | Single-wire BDM | Single-wire BDM | Single-wire BDM | Single-wire BDM | Single-wire BDM | Single-wire BDM | Single-wire BDM |
| Param Match Score | 100% | 95% | 80% | 70% | 70% | 100% | 100% |
Bảo phân biệt quan trọng
- Largest Flash in the HCS08 AW60 sub-family (vsMC9S08AW48CPUE)
- Same silicon as the canonical NXP MC9S08AW60 family (vsMC9S08AW32CPUE)
- NXP/Freescale authorized stocking via Rochester Electronics (vsMC9S08AW16CPUE)
Ghi chú thiết kế
Place a 0.1 uF ceramic decoupling capacitor as close as possible to each VDD/VSS pair (typically pins 3/4 and 29/30 on the LQFP-64). Add a bulk 1 uF to 10 uF ceramic on the main VDD rail to handle the 40 MHz core's switching transients. The internal voltage regulator generates the 1.8 V core supply from the external 2.7 V to 5.5 V input, so clean external decoupling directly impacts ADC and PWM analog noise performance.
Keep analog ADC input traces (PTA/PTB pins) short and routed away from high-frequency switching signals such as PWM outputs and clock traces to minimize ADC crosstalk. Use a ground plane under the LQFP-64 to provide low-impedance return paths; thermal relief pads on all 64 LQFP pins improve hand-soldering and inspection. For BDM programming, route the BKGD/MS pin (pin 64) to a 2-pin header with ESD protection for in-circuit programming access.
Do not exceed 5.5 V on any VDD pin or apply reverse polarity; the device has no reverse-battery protection. The single-wire BDM interface requires careful signal integrity - excessive capacitance on BKGD/MS prevents reliable programming. The internal Flash is rated for a finite erase/write cycle count - implement wear-leveling or external EEPROM for frequently updated parameters. Always configure the watchdog timer before enabling interrupts in production firmware.
Thông tin tuân thủ
Compliance status not present in Verified Web Data. Industrial and Automotive industry support noted per NXP family datasheet; specific AEC-Q100 grade not confirmed in extracted snippets. RoHS/REACH/lead-free status to be verified against the NXP product page or distributor environmental documentation.