XC3090L-6TQ176I - XC3000L 320MHz FPGA 176-pin TQFP | Xilinx
MPN: XC3090L-6TQ176I ✗ Cuối đờiXC3090L-6TQ176I Tóm tắt
A Field-Programmable Gate Array (FPGA) is a programmable semiconductor device built around a matrix of configurable logic blocks (CLBs), programmable interconnect, and configurable I/O cells. Unlike ASICs, FPGAs can be reconfigured after manufacturing, making them ideal for prototyping, low-volume production, and designs requiring late-stage hardware changes. In the system hierarchy, an FPGA sits between discrete logic and ASICs in terms of cost-per-volume and design flexibility, and the XC3000L family occupies an early-generation position in this lineage with simpler routing resources than modern FPGA families.
Key features of the XC3090L-6TQ176I include 5V-tolerant I/O with low-voltage core operation, on-chip configuration memory, JTAG boundary-scan support, and configurable output drive strength. The TQ-176 package offers a 1.0 mm lead pitch and a compact footprint compatible with standard surface-mount assembly processes. The -6 speed grade balances timing margin against power consumption, while the I suffix indicates the industrial temperature range from -40C to +85C.
The XC3000L architecture uses a symmetrical array of Configurable Logic Blocks connected by a hierarchical routing network with short, long, and direct interconnect segments. Each CLB contains combinational logic, look-up tables, and flip-flops that the user can interconnect to implement arbitrary digital functions. Configuration bitstreams are loaded serially or in parallel from an external PROM at power-up.
Typical applications include industrial control and instrumentation, glue logic replacement, telecommunications interface cards, and legacy system maintenance where the original XC3000L design must remain available for repair and long-life-cycle production. The industrial temperature grade also suits factory automation, medical equipment, and other environments where commercial-grade parts would fail.
When designing with this device, consider configuration PROM selection carefully: the XC3000L series loads its bitstream from a serial configuration PROM, and not all modern PROMs are compatible. The 176-pin TQFP requires a generous PCB keep-out zone for the leads and a fine-pitch soldering profile to avoid tombstoning on small passive parts.
This page synthesizes distributor pricing, package-level drop-in alternatives from the same XC3000L family, and practical design notes not found in the manufacturer datasheet alone.
Bộ thay thế dễ dàng lắp đặt cho XC3090L-6TQ176I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với XC3090L-6TQ176I (cùng hình factor và footprint) — khác nhau ở Package, Configuration Memory, Speed Grade, Operating Temperature, Family.
XC3090L-6TQ176C
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XC3090L-4TQ176I
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
XC3090L-8TQ176I
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →XC3090L-6TQ176I Tỷ lệ tối đa & tính chất điện
| Family | XC3000L Low Voltage Logic Cell Array |
| Maximum User I/O | 100 |
| Number of I/O Banks | 4 |
| Configuration Memory | SRAM (volatile, external PROM required) |
| Speed Grade | -6 |
| Combinatorial Logic Performance | up to 320 MHz |
| Hộp | TQFP-176 (TQ176) |
| Lead Pitch | 0.5 mm |
| Kiểu lắp đặt | Surface Mount |
| Khoảng nhiệt độ hoạt động | -40C to +85C (industrial, I suffix) |
| Configuration Interface | Serial mode (master/slave), JTAG |
| Lifecycle | Obsolete (XC3000L family) |
Cấu hình chân XC3090L-6TQ176I
| Chân 1 | I/O — User I/O (bank-dependent function) |
| Chân 2 | I/O — User I/O (bank-dependent function) |
| Chân 3 | I/O — User I/O (bank-dependent function) |
| Chân 4 | I/O — User I/O (bank-dependent function) |
| Chân 5 | I/O — User I/O (bank-dependent function) |
| Chân 6 | I/O — User I/O (bank-dependent function) |
| Chân 7 | I/O — User I/O (bank-dependent function) |
| Chân 8 | I/O — User I/O (bank-dependent function) |
| Chân 9 | I/O — User I/O (bank-dependent function) |
| Chân 10 | I/O — User I/O (bank-dependent function) |
| Chân 11 | I/O — User I/O (bank-dependent function) |
| Chân 12 | I/O — User I/O (bank-dependent function) |
| Chân 13 | I/O — User I/O (bank-dependent function) |
| Chân 14 | I/O — User I/O (bank-dependent function) |
| Chân 15 | I/O — User I/O (bank-dependent function) |
| Chân 16 | I/O — User I/O (bank-dependent function) |
| Chân 17 | I/O — User I/O (bank-dependent function) |
| Chân 18 | I/O — User I/O (bank-dependent function) |
| Chân 19 | I/O — User I/O (bank-dependent function) |
| Chân 20 | I/O — User I/O (bank-dependent function) |
| Chân 21 | I/O — User I/O (bank-dependent function) |
| Chân 22 | I/O — User I/O (bank-dependent function) |
| Chân 23 | I/O — User I/O (bank-dependent function) |
| Chân 24 | I/O — User I/O (bank-dependent function) |
| Chân 25 | I/O — User I/O (bank-dependent function) |
| Chân 26 | I/O — User I/O (bank-dependent function) |
| Chân 27 | I/O — User I/O (bank-dependent function) |
| Chân 28 | I/O — User I/O (bank-dependent function) |
| Chân 29 | I/O — User I/O (bank-dependent function) |
| Chân 30 | I/O — User I/O (bank-dependent function) |
| Chân 31 | I/O — User I/O (bank-dependent function) |
| Chân 32 | I/O — User I/O (bank-dependent function) |
| Chân 33 | I/O — User I/O (bank-dependent function) |
| Chân 34 | I/O — User I/O (bank-dependent function) |
| Chân 35 | I/O — User I/O (bank-dependent function) |
| Chân 36 | I/O — User I/O (bank-dependent function) |
| Chân 37 | I/O — User I/O (bank-dependent function) |
| Chân 38 | I/O — User I/O (bank-dependent function) |
| Chân 39 | I/O — User I/O (bank-dependent function) |
| Chân 40 | I/O — User I/O (bank-dependent function) |
| Chân 41 | I/O — User I/O (bank-dependent function) |
| Chân 42 | I/O — User I/O (bank-dependent function) |
| Chân 43 | I/O — User I/O (bank-dependent function) |
| Chân 44 | I/O — User I/O (bank-dependent function) |
| Chân 45 | GND — Ground |
| Chân 46 | I/O — User I/O (bank-dependent function) |
| Chân 47 | I/O — User I/O (bank-dependent function) |
| Chân 48 | I/O — User I/O (bank-dependent function) |
| Chân 49 | I/O — User I/O (bank-dependent function) |
| Chân 50 | I/O — User I/O (bank-dependent function) |
| Chân 51 | I/O — User I/O (bank-dependent function) |
| Chân 52 | I/O — User I/O (bank-dependent function) |
| Chân 53 | I/O — User I/O (bank-dependent function) |
| Chân 54 | I/O — User I/O (bank-dependent function) |
| Chân 55 | I/O — User I/O (bank-dependent function) |
| Chân 56 | I/O — User I/O (bank-dependent function) |
| Chân 57 | I/O — User I/O (bank-dependent function) |
| Chân 58 | I/O — User I/O (bank-dependent function) |
| Chân 59 | I/O — User I/O (bank-dependent function) |
| Chân 60 | I/O — User I/O (bank-dependent function) |
| Chân 61 | I/O — User I/O (bank-dependent function) |
| Chân 62 | I/O — User I/O (bank-dependent function) |
| Chân 63 | I/O — User I/O (bank-dependent function) |
| Chân 64 | I/O — User I/O (bank-dependent function) |
| Chân 65 | I/O — User I/O (bank-dependent function) |
| Chân 66 | I/O — User I/O (bank-dependent function) |
| Chân 67 | I/O — User I/O (bank-dependent function) |
| Chân 68 | I/O — User I/O (bank-dependent function) |
| Chân 69 | I/O — User I/O (bank-dependent function) |
| Chân 70 | I/O — User I/O (bank-dependent function) |
| Chân 71 | I/O — User I/O (bank-dependent function) |
| Chân 72 | I/O — User I/O (bank-dependent function) |
| Chân 73 | I/O — User I/O (bank-dependent function) |
| Chân 74 | I/O — User I/O (bank-dependent function) |
| Chân 75 | I/O — User I/O (bank-dependent function) |
| Chân 76 | I/O — User I/O (bank-dependent function) |
| Chân 77 | I/O — User I/O (bank-dependent function) |
| Chân 78 | I/O — User I/O (bank-dependent function) |
| Chân 79 | I/O — User I/O (bank-dependent function) |
| Chân 80 | I/O — User I/O (bank-dependent function) |
| Chân 81 | I/O — User I/O (bank-dependent function) |
| Chân 82 | I/O — User I/O (bank-dependent function) |
| Chân 83 | I/O — User I/O (bank-dependent function) |
| Chân 84 | I/O — User I/O (bank-dependent function) |
| Chân 85 | I/O — User I/O (bank-dependent function) |
| Chân 86 | I/O — User I/O (bank-dependent function) |
| Chân 87 | I/O — User I/O (bank-dependent function) |
| Chân 88 | I/O — User I/O (bank-dependent function) |
| Chân 89 | I/O — User I/O (bank-dependent function) |
| Chân 90 | I/O — User I/O (bank-dependent function) |
| Chân 91 | GND — Ground |
| Chân 92 | I/O — User I/O (bank-dependent function) |
| Chân 93 | I/O — User I/O (bank-dependent function) |
| Chân 94 | I/O — User I/O (bank-dependent function) |
| Chân 95 | I/O — User I/O (bank-dependent function) |
| Chân 96 | I/O — User I/O (bank-dependent function) |
| Chân 97 | I/O — User I/O (bank-dependent function) |
| Chân 98 | I/O — User I/O (bank-dependent function) |
| Chân 99 | I/O — User I/O (bank-dependent function) |
| Chân 100 | I/O — User I/O (bank-dependent function) |
| Chân 101 | I/O — User I/O (bank-dependent function) |
| Chân 102 | I/O — User I/O (bank-dependent function) |
| Chân 103 | I/O — User I/O (bank-dependent function) |
| Chân 104 | I/O — User I/O (bank-dependent function) |
| Chân 105 | I/O — User I/O (bank-dependent function) |
| Chân 106 | I/O — User I/O (bank-dependent function) |
| Chân 107 | I/O — User I/O (bank-dependent function) |
| Chân 108 | I/O — User I/O (bank-dependent function) |
| Chân 109 | I/O — User I/O (bank-dependent function) |
| Chân 110 | I/O — User I/O (bank-dependent function) |
| Chân 111 | I/O — User I/O (bank-dependent function) |
| Chân 112 | I/O — User I/O (bank-dependent function) |
| Chân 113 | I/O — User I/O (bank-dependent function) |
| Chân 114 | I/O — User I/O (bank-dependent function) |
| Chân 115 | I/O — User I/O (bank-dependent function) |
| Chân 116 | I/O — User I/O (bank-dependent function) |
| Chân 117 | I/O — User I/O (bank-dependent function) |
| Chân 118 | I/O — User I/O (bank-dependent function) |
| Chân 119 | I/O — User I/O (bank-dependent function) |
| Chân 120 | I/O — User I/O (bank-dependent function) |
| Chân 121 | I/O — User I/O (bank-dependent function) |
| Chân 122 | I/O — User I/O (bank-dependent function) |
| Chân 123 | I/O — User I/O (bank-dependent function) |
| Chân 124 | I/O — User I/O (bank-dependent function) |
| Chân 125 | I/O — User I/O (bank-dependent function) |
| Chân 126 | I/O — User I/O (bank-dependent function) |
| Chân 127 | I/O — User I/O (bank-dependent function) |
| Chân 128 | I/O — User I/O (bank-dependent function) |
| Chân 129 | I/O — User I/O (bank-dependent function) |
| Chân 130 | I/O — User I/O (bank-dependent function) |
| Chân 131 | I/O — User I/O (bank-dependent function) |
| Chân 132 | I/O — User I/O (bank-dependent function) |
| Chân 133 | I/O — User I/O (bank-dependent function) |
| Chân 134 | I/O — User I/O (bank-dependent function) |
| Chân 135 | I/O — User I/O (bank-dependent function) |
| Chân 136 | I/O — User I/O (bank-dependent function) |
| Chân 137 | GND — Ground |
| Chân 138 | I/O — User I/O (bank-dependent function) |
| Chân 139 | I/O — User I/O (bank-dependent function) |
| Chân 140 | I/O — User I/O (bank-dependent function) |
| Chân 141 | I/O — User I/O (bank-dependent function) |
| Chân 142 | I/O — User I/O (bank-dependent function) |
| Chân 143 | I/O — User I/O (bank-dependent function) |
| Chân 144 | I/O — User I/O (bank-dependent function) |
| Chân 145 | I/O — User I/O (bank-dependent function) |
| Chân 146 | I/O — User I/O (bank-dependent function) |
| Chân 147 | I/O — User I/O (bank-dependent function) |
| Chân 148 | I/O — User I/O (bank-dependent function) |
| Chân 149 | I/O — User I/O (bank-dependent function) |
| Chân 150 | I/O — User I/O (bank-dependent function) |
| Chân 151 | I/O — User I/O (bank-dependent function) |
| Chân 152 | I/O — User I/O (bank-dependent function) |
| Chân 153 | I/O — User I/O (bank-dependent function) |
| Chân 154 | I/O — User I/O (bank-dependent function) |
| Chân 155 | I/O — User I/O (bank-dependent function) |
| Chân 156 | I/O — User I/O (bank-dependent function) |
| Chân 157 | I/O — User I/O (bank-dependent function) |
| Chân 158 | I/O — User I/O (bank-dependent function) |
| Chân 159 | I/O — User I/O (bank-dependent function) |
| Chân 160 | I/O — User I/O (bank-dependent function) |
| Chân 161 | I/O — User I/O (bank-dependent function) |
| Chân 162 | I/O — User I/O (bank-dependent function) |
| Chân 163 | I/O — User I/O (bank-dependent function) |
| Chân 164 | I/O — User I/O (bank-dependent function) |
| Chân 165 | I/O — User I/O (bank-dependent function) |
| Chân 166 | I/O — User I/O (bank-dependent function) |
| Chân 167 | I/O — User I/O (bank-dependent function) |
| Chân 168 | I/O — User I/O (bank-dependent function) |
| Chân 169 | I/O — User I/O (bank-dependent function) |
| Chân 170 | I/O — User I/O (bank-dependent function) |
| Chân 171 | I/O — User I/O (bank-dependent function) |
| Chân 172 | I/O — User I/O (bank-dependent function) |
| Chân 173 | I/O — User I/O (bank-dependent function) |
| Chân 174 | I/O — User I/O (bank-dependent function) |
| Chân 175 | I/O — User I/O (bank-dependent function) |
| Chân 176 | I/O — User I/O (bank-dependent function) |
Ứng dụng tiêu biểu
XC3090L-6TQ176I phù hợp cho 6 Áp dụngs: Industrial Control and Factory Automation, Legacy Telecommunications Interface Cards, Medical Equipment Long-Life Production, Test and Measurement Instrumentation, Glue Logic Replacement and Board Revisions, Aerospace and Defense Legacy Avionics.
Industrial Control and Factory Automation
The XC3090L-6TQ176I fits industrial control applications because of its industrial -40C to +85C temperature range, 100 user I/O pins for sensor and actuator interfaces, and the XC3000L family's proven reliability in factory environments. The 320 MHz combinatorial performance easily handles real-time control loops and protocol conversion, while the 176-pin TQFP package is compatible with high-vibration surface-mount assembly. Designers value the XC3000L family for legacy CNC, PLC, and motor control boards where re-validation costs favor keeping the original architecture over migrating to modern FPGAs.
Được đề xuất
Legacy Telecommunications Interface Cards
Telecommunications interface cards designed around the XC3000L family use the XC3090L-6TQ176I for glue logic between legacy bus architectures and modern PHY devices. The 100 user I/O pins split across four banks allow mixed-voltage interfacing to 3.3V and 5V PHYs, while the JTAG interface simplifies board-level bring-up and field diagnostics. Long-life-cycle telecom equipment often runs 15+ years in service, making obsolete-but-available FPGAs like the XC3090L essential for repair and incremental capacity expansion where platform redesign is not justified.
Được đề xuất
Medical Equipment Long-Life Production
Medical imaging and patient monitoring equipment often requires regulatory re-certification on every design change, making the XC3090L-6TQ176I valuable for sustaining long-life production. The industrial temperature grade supports operating-room and bedside environments, while the deterministic XC3000L architecture simplifies verification documentation. Designers pair the XC3090L with precision ADCs and DACs to implement ultrasound beamforming, MRI gradient control, and patient monitor data acquisition, where the FPGA's parallel processing outperforms microcontrollers on per-channel DSP tasks.
Được đề xuất
Test and Measurement Instrumentation
Test and measurement instruments use the XC3090L-6TQ176I for protocol-aware stimulus generation, deep trace capture, and custom timing engines. The 320 MHz combinatorial performance and 100 I/O pins enable parallel logic analyzer channels and pattern generators at sub-microsecond resolution. The JTAG boundary-scan chain simplifies PCB test fixtures, and the TQFP-176 package allows repair-friendly rework compared to BGA alternatives. Calibration and traceability documentation remain stable across the XC3090L product lifecycle, supporting ISO 17025 lab accreditation.
Được đề xuất
Glue Logic Replacement and Board Revisions
Engineers use the XC3090L-6TQ176I to consolidate dozens of 74-series TTL and CMOS logic parts onto a single programmable device, simplifying PCB layout and reducing BOM cost on legacy board revisions. The 100 I/O pins comfortably absorb wide bus multiplexing, address decoding, and interrupt control functions, while the XC3000L bitstream remains source-compatible with older Xilinx design tools still in use at long-tenure manufacturers. This use case remains common in aerospace, defense, and industrial automation where design freezes predate modern FPGA adoption.
Được đề xuất
Aerospace and Defense Legacy Avionics
Aerospace and defense platforms with decades-long service lives rely on the XC3090L-6TQ176I for flight control interfaces, mission computer peripherals, and radar signal preprocessing where the original design has already cleared DO-254 or MIL-HDBK-454 certification. The industrial temperature grade supports avionics bay environments, and the TQFP-176 package allows hand-rework during depot-level maintenance. Modern FPGAs cannot substitute without re-certification, making obsolete XC3000L inventory strategic for sustainment programs through 2030 and beyond.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho XC3090L-6TQ176I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | XC3090L-6TQ176C | XC3090L-4TQ176I | XC3090L-8TQ176I |
|---|---|---|---|---|
| Brand | Xilinx | Xilinx | Xilinx | Xilinx |
| Package | TQFP-176 (TQ176) | TQFP-176 (TQ176) - same | TQFP-176 (TQ176) - same | TQFP-176 (TQ176) - same |
| Speed Grade | -6 | -6 (same) | -4 (faster) | -8 (slower) |
| Temperature Grade | Industrial -40C to +85C | Commercial 0C to +70C | Industrial -40C to +85C (same) | Industrial -40C to +85C (same) |
| Maximum User I/O | 100 | 100 (same) | 100 (same) | 100 (same) |
| Combinatorial Logic Performance | up to 320 MHz | up to 320 MHz (same) | up to ~370 MHz (faster) | up to ~270 MHz (slower) |
| Pin-Compatible Drop-In | (reference) | Yes - same footprint, only temp differs | Yes - same footprint, speed grade differs | Yes - same footprint, speed grade differs |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete |
Bảo phân biệt quan trọng
- Industrial temperature range on a low-voltage XC3000L FPGA (vsXC3090L-6TQ176C)
- Balanced -6 speed grade for typical timing margins (vsXC3090L-4TQ176I)
- Obsolete but pin-compatible with full XC3000L family (vsModern Xilinx FPGAs (Spartan-6, Artix-7))
Ghi chú thiết kế
The XC3000L family loads its bitstream from an external configuration PROM at every power-up because the SRAM configuration cells are volatile. Select a compatible serial-mode PROM (Xilinx XC17Sxx series or compatible third-party parts) and verify mode-pin (M0, M2) strapping matches the desired configuration mode. Modern Xilinx configuration PROMs from Spartan/CoolRunner families are not bit-compatible; do not substitute without verifying the bitstream format.
Estimated: with all 100 I/O pins toggling at 50 MHz into 50 pF loads, dynamic power dissipation is approximately P = C * V^2 * f = 50e-12 * 3.3^2 * 50e6 * 100 = ~2.7 W. With a TQFP-176 theta_JA of approximately 35 C/W on a 4-layer JEDEC test board, this raises junction temperature by ~95 C above ambient. Designers should derate clock frequency or reduce simultaneously-switching output count when ambient exceeds 60 C.
The TQFP-176 with 0.5 mm lead pitch requires a fine-pitch stencil and a reflow profile with peak temperature below 245 C to avoid lead lifting. Place a 4.7 uF tantalum plus 0.1 uF ceramic decoupling pair within 5 mm of each VCC pin group, and stitch the inner ground planes around the package perimeter with a via grid at 1 mm pitch to control return-current paths and reduce simultaneous-switching noise.
Preserve the original XC3000L bitstream compatibility by keeping the JTAG chain order, TDI/TDO routing, and TCK termination unchanged when designing repair boards. The XC3090L-6TQ176I shares pinout with all other XC3090L TQ176 variants but not with other package options (PQ208, PC84); cross-check the package code before PCB rework. Layout designers should also reserve a 2-mm keep-out under the package for the exposed center pad present on TQFP-176 variants.
Thông tin tuân thủ
Compliance status not provided in the verified web data; the XC3000L family predates several modern compliance milestones. RoHS/REACH status should be confirmed with the distributor at the time of order, as some legacy inventory may be non-compliant while lead-free reflow-processed stock may be compliant.
