10M08SAM153C8G - MAX 10 FPGA, 8K LE, 153-MBGA | Intel / Altera
MPN： 10M08SAM153C8G ✓ 啟用中10M08SAM153C8G 概覽
A field-programmable gate array (FPGA) is a semiconductor device built around a matrix of configurable logic blocks (CLBs) connected by programmable interconnect, allowing designers to implement arbitrary digital logic, glue logic, and parallel processing functions after PCB fabrication. Within the broader taxonomy of programmable logic, FPGAs sit alongside CPLDs and SPLDs as non-processor programmable devices; the MAX 10 family in particular targets low-power, instant-on applications by embedding dual-configuration flash on-die, eliminating the need for external boot memory.
The 10M08SAM153C8G delivers up to 8,000 logic elements, 387,072 bits (approximately 378 Kbit user flash), 112 Kbits of block RAM (M9K blocks), and 4 embedded 18x18 multipliers. It integrates an analog-to-digital converter (ADC) block, supports up to 250 user I/O pins (package dependent) and offers 1.2 V core operation with 3.0/3.3 V LVCMOS/LVTTL I/O capability. The 153-ball MBGA package maximizes logic density in a compact surface-mount footprint suitable for space-constrained industrial designs.
Architecturally, MAX 10 devices use non-volatile configuration memory that enables instant-on operation in under 10 ms from a single 1.2 V supply, eliminating boot PROM or external flash. The built-in ADC supports 12-bit SAR conversion at up to 1 MSPS across analog input pins, providing mixed-signal integration that simplifies sensor monitoring and power-supply telemetry. Internal flash can also be partitioned for user data storage, replacing external EEPROMs in many designs.
Typical applications include industrial control and factory automation (motor control glue logic, sensor fusion pre-processing), IoT edge nodes (sensor aggregation and protocol bridging), test and measurement front-ends, consumer electronics with display timing controllers, and portable/battery-powered devices that benefit from instant-on behavior. The on-chip ADC also makes MAX 10 suitable for predictive-maintenance sensor hubs.
When designing with this part, account for power-supply sequencing: MAX 10 devices require a stable 1.2 V core rail and a separate VCCIO bank supply. Use the Intel Quartus Prime toolchain for synthesis, place-and-route, and configuration bitstream generation. The C8G speed grade (commercial, 8 ns internal timing) represents the slowest of the MAX 10 commercial grades; choose faster speed grades only if critical paths demand the additional timing margin.
This page synthesizes distributor pricing, real-time stock, and parametric drop-in alternatives for the 10M08SAM153C8G, plus design notes that go beyond what is in the Intel MAX 10 datasheet alone.
直接替換替代品，適用於 10M08SAM153C8G — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： 10M08SAM153C8G （相同外形與佔位） — 差異在於 Package, Speed Grade, Operating Temperature, Mounting Type, RoHS Status.
10M08SAM153I7G
✅ 直接替換聯絡詢價
查看資料表 →10M08SCM153C8G
✅ 直接替換聯絡詢價
查看資料表 →10M08SAM153C7G
✅ 直接替換📋 參考替代品（不在目錄中）
10M04SAM153C8G
✅ 直接替換聯絡詢價
查看資料表 →10M16SAM153C8G
✅ 直接替換📋 參考替代品（不在目錄中）
10M08SAM153C8G 最大額定值與電氣特性
| Family | MAX 10 FPGA |
| Logic Elements (LE) | 8,000 |
| Embedded User Flash | 387,072 bits (378 Kbit) |
| Block RAM (M9K) | 112 Kbit |
| Embedded Multipliers (18x18) | 4 |
| Maximum User I/O (package-dependent) | 250 |
| Process Technology | 55 nm |
| Core Voltage | 1.2 V |
| On-chip ADC | 12-bit SAR, up to 1 MSPS |
| Configuration Method | Internal flash (instant-on) |
| 封裝 | 153-ball MBGA |
| Speed Grade | C8 (commercial, slowest) |
| 工作溫度 | 0C to +85C (commercial) |
| 安裝類型 | Surface Mount |
| RoHS 狀態 | Compliant |
10M08SAM153C8G 153-ball mbga 腳位配置指南
10M08SAM153C8G（153-ball mbga 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： 10M08SAM153C8G.
請參閱 資料表 以查看完整腳位配置。
典型應用
10M08SAM153C8G 適用於 6 應用s: Industrial Motor Control and Factory Automation, IoT Edge Sensor Aggregation Hubs, Test and Measurement Front-End, Display Timing and Bridge Controllers, Portable and Battery-Powered Devices, Communications Protocol Bridging.
Industrial Motor Control and Factory Automation
The 10M08SAM153C8G's 8,000 logic elements and 4 embedded 18x18 multipliers make it well-suited for industrial motor-control glue logic in factory automation. The MAX 10's instant-on configuration from internal flash (<10 ms) is critical for safety-rated machinery that must enter a deterministic safe state on power-up. The integrated 12-bit ADC samples motor current and back-EMF directly, eliminating external analog ICs. Combined with up to 250 user I/O pins, the 153-MBGA package can drive multi-axis stepper and BLDC controllers while logging diagnostic data into the 387 Kbit user flash.
推薦
IoT Edge Sensor Aggregation Hubs
The 10M08SAM153C8G serves as a sensor-aggregation hub for IoT edge nodes by combining I2C/SPI/UART bridging, local decision logic, and data buffering in 112 Kbit block RAM before forwarding to a host MCU or wireless module. The non-volatile MAX 10 architecture eliminates external boot flash, reducing BOM cost and PCB area. The on-chip 12-bit ADC reads temperature, humidity, and battery voltage alongside digital sensors. Power dissipation is low enough for battery-powered sensor nodes, and instant-on wake-up is faster than SRAM-based FPGAs.
推薦
Test and Measurement Front-End
In test and measurement equipment, the 10M08SAM153C8G provides programmable digital signal conditioning, custom protocol decoding, and timing generation between an analog front-end and a host processor. The 8,000 logic elements and 4 hardware multipliers enable FIR filtering and CRC computation in real time. The internal flash stores multiple personalities for different DUT protocols, allowing field reconfiguration via JTAG. Up to 250 user I/O pins accommodate parallel LVDS interfaces in the 153-MBGA package.
推薦
Display Timing and Bridge Controllers
The 10M08SAM153C8G implements custom display timing controllers, video format converters, and bridging between MIPI, LVDS, RGB, and HDMI-style interfaces. Its 4 embedded 18x18 multipliers handle scaling math, and 112 Kbit block RAM stores line buffers for color-space conversion. The 153-MBGA package exposes enough LVDS pairs to drive dual-channel displays. Designers can update the configuration flash via JTAG to add new display modes without a board spin.
推薦
Portable and Battery-Powered Devices
The MAX 10's low static power and instant-on behavior make the 10M08SAM153C8G well-suited for portable, battery-powered devices such as handheld instruments, wearables charging cradles, and ruggedized data loggers. Internal flash eliminates external boot memory, saving standby current. The on-chip ADC monitors battery voltage and pack temperature without an external fuel gauge IC. The 153-MBGA package delivers this functionality in a footprint suitable for compact handhelds.
推薦
Communications Protocol Bridging
The 10M08SAM153C8G bridges between industrial communication protocols such as RS-485, CAN, Modbus, and EtherCAT by implementing protocol conversion in programmable logic. The 8,000 LEs provide headroom for protocol stacks plus custom extensions, while 4 hardware accelerators handle CRC and Manchester encoding. With up to 250 user I/O pins, multiple buses can be terminated and monitored simultaneously in the 153-MBGA package. Field updates via JTAG allow adding protocol revisions without hardware changes.
推薦
推薦產品摘要
工程參考資料，適用於 10M08SAM153C8G — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | 10M08SAM153I7G | 10M08SCM153C8G | 10M08SAM153C7G | 10M04SAM153C8G | 10M16SAM153C8G |
|---|---|---|---|---|---|---|
| Package | 153-MBGA | 153-MBGA - same | 153-MBGA - same | 153-MBGA - same | 153-MBGA - same | 153-MBGA - same |
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Family | MAX 10 | MAX 10 | MAX 10 | MAX 10 | MAX 10 | MAX 10 |
| Logic Elements | 8,000 | 8,000 | 8,000 | 8,000 | 4,000 | 16,000 |
| Block RAM (M9K) | 112 Kbit | 112 Kbit | 112 Kbit | 112 Kbit | 75 Kbit | 236 Kbit |
| Embedded User Flash | 387,072 bits | 387,072 bits | 387,072 bits | 387,072 bits | 235,929 bits | 549,888 bits |
| Embedded Multipliers (18x18) | 4 | 4 | 4 | 4 | 2 | 8 |
| Speed Grade | C8 (slowest commercial) | I7 (industrial, slowest) | C8 | C7 (~12% faster) | C8 | C8 |
| On-chip ADC | 12-bit SAR, up to 1 MSPS | 12-bit SAR, up to 1 MSPS | 12-bit SAR, up to 1 MSPS | 12-bit SAR, up to 1 MSPS | 12-bit SAR, up to 1 MSPS | 12-bit SAR, up to 1 MSPS |
主要差異化特點
- Internal dual-configuration flash eliminates external boot memory (對比10CL080YU484C8G (Cyclone 10 LP))
- Integrated 12-bit ADC at no extra cost (對比10M16SAM153C8G (10M16 MAX 10, same family))
- Compact 153-MBGA package maximizes logic density per board area (對比10M08SAE144C8G (EQFP-144 variant))
- Commercial temperature grade optimized for cost-sensitive applications (對比10M08SAM153I7G (industrial temp grade))
設計說明
The MAX 10 requires multiple supplies: a 1.2 V VCC core rail (derived from the integrated LDO or external regulator), a 2.5 V VCCA analog rail for the ADC, and per-bank VCCIO rails for I/O (1.2 V to 3.3 V). Decouple each rail with 0.1 uF X7R ceramic capacitors placed within 5 mm of each supply pin; add a bulk 10 uF capacitor near the package. Power-on sequence is flexible, but VCC must reach 1.0 V within 100 ms to guarantee proper configuration. Estimated: at 25C ambient and 50% toggle activity, the 10M08 dissipates approximately 0.3 W to 0.6 W; derate to 70% for industrial layouts.
The 153-MBGA is a fine-pitch BGA package that requires microvia or via-in-pad PCB technology for reliable assembly. Use 0.4 mm pitch BGA land patterns with NSMD (non-solder-mask-defined) pads to improve self-alignment during reflow. Place decoupling capacitors on the opposite PCB side directly under the supply balls to minimize loop inductance. Maintain a 4-layer stackup with continuous VCC and GND planes under the FPGA to provide a low-impedance return path and reduce EMI. According to Intel MAX 10 hardware design guidelines, signal trace impedance should be 50 ohm single-ended and 100 ohm differential.
Common MAX 10 design mistakes include (1) leaving JTAG TCK floating, which causes random configuration failures - always pull TCK high through a 10 kohm resistor; (2) using the user flash as a generic EEPROM without enabling ECC, which risks undetected bit errors - enable the hardware ECC feature for any data-critical storage; (3) assuming all MAX 10 speed grades are timing-identical - the C8 grade is the slowest and may not meet timing at 100 MHz or above; choose C7 or C6 for higher-speed designs; (4) failing to program the security fuses during production, allowing bitstream readback; (5) connecting ADC analog inputs to signals above VCCA without external clamping, which can permanently damage the analog front-end.
For LVDS pairs on the MAX 10, maintain 100 ohm differential impedance and match lengths within 150 mil (3.8 mm). Use 2 mil-to-4 mil spacing between pairs to minimize crosstalk. Keep high-speed SERDES or LVDS traces on the top PCB layer directly over a continuous GND plane, avoiding splits or voids. According to Intel MAX 10 device handbook section on I/O timing, set input pin delay chains via the Quartus fitter to compensate for PCB trace skew. When using the ADC, route analog inputs away from switching signals and add a ferrite bead on the VCCA supply to prevent digital switching noise from coupling into the SAR converter.
合規資訊
RoHS compliant per the 'G' suffix in the MPN (Intel convention: G = lead-free RoHS). Halogen-free per JEDEC JS709B. Conflict-mineral reporting per Intel annual CMRT filings. AEC-Q100 not applicable - the part is not automotive-qualified; the 10M08 family does not currently include an AEC-Q100 variant.
