MPC8272CZQTIEA557 - PowerQUICC II MPU 400MHz PBGA516 | NXP
MPN： MPC8272CZQTIEA557 ✓ 啟用中MPC8272CZQTIEA557 概覽
A microprocessor (MPU) is an integrated circuit that contains the central processing unit of a computer system on a single chip. In modern embedded hierarchies, an MPU is a superset of a microcontroller (MCU) — MPUs typically lack on-chip non-volatile program memory but offer higher clock frequencies, MMU/memory management, external bus interfaces, and richer peripheral integration. The MPC8272 sits at the MPU tier of the embedded taxonomy: PowerQUICC II -> PowerQUICC family -> communications processors -> MPUs -> microcontrollers and processors -> semiconductors.
Key differentiating features of the MPC8272 include its dual PowerQUICC communications engine, support for 10/100 Mbps Ethernet MACs, up to four serial communications controllers, and a 60x-compatible 32-bit external bus. The integrated system interface supports SDRAM, Flash, and ROM peripherals directly. The internal core voltage is 1.5 V with 3.3 V I/O, and the device is fabricated on a 0.13 µm HiP7 process.
Architecturally, the MPC8272C family pairs a high-performance e500 or G2_LE PowerPC core with the CPM (Communications Processor Module), offloading DMA, HDLC/UART/SCC, and ATM/POS-PHY processing from the core. This split-architecture model allows the device to sustain high-throughput networking traffic while keeping MIPS available for the host operating system, which typically runs an embedded RTOS or a custom control loop.
Typical applications include wired routers and switches, DSLAM line cards, industrial control and automation gateways, telecom base-station controllers, and defense/aerospace embedded computing modules that require deterministic communications alongside a 32-bit general-purpose control plane.
When designing with the MPC8272, observe thermal and power guidelines: junction-to-ambient resistance is package-dependent and the part is rated for industrial and extended temperature grades. Use proper BGA PCB layout with via-in-pad or dogbone fan-out, matched-impedance traces for the external memory bus, and adequate decoupling.
This page synthesizes authorized distributor stock indicators, drop-in and pin-compatible alternatives, and design notes compiled from public datasheet excerpts and the cross-reference web results — content not present on the manufacturer datasheet alone.
直接替換替代品，適用於 MPC8272CZQTIEA557 — 相同封裝，腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號： MPC8272CZQTIEA557 （相同外形與佔位） — 差異在於 Core Architecture, Mounting Type, Package.
MPC8272CVRPIEA
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
MPC8272CZQTIEA
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
MPC8280CZQTIEA
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
MPC8270CZQTIEA
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品（不在目錄中）
MPC8271CZQTIEA
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →MPC8272CZQTIEA557 最大額定值與電氣特性
| Processor Family | PowerQUICC II (MPC82xx) |
| Processor Type | MPC82xx 32-bit Power Architecture |
| Core Architecture | PowerPC G2_LE (Power Architecture, 32-bit) |
| Core Clock Speed | 400 MHz |
| Core Voltage | 1.5 V |
| I/O Voltage | 3.3 V |
| USB Interface | USB 2.0 (1 port) |
| Ethernet | 10/100 Mbps MAC (Fast Ethernet) |
| Serial Communications | FCC, MCC, SCC, SMC serial controllers (per CPM) |
| External Bus | 60x-compatible 32-bit bus, SDRAM/Flash/ROM interface |
| L1 Cache | 16 KB instruction / 16 KB data (per family spec) |
| 封裝 | 516-BBGA (PBGA516) |
| 安裝類型 | Surface Mount (BGA) |
| Process Technology | 0.13 µm HiP7 |
| Lead Status | Contains Lead (non-lead-free) |
| RoHS 狀態 | RoHS status per manufacturer — see compliance_info |
| 工作溫度 | Industrial / Extended (grade-specific) |
MPC8272CZQTIEA557 516-bbga (pbga516) 腳位配置指南
MPC8272CZQTIEA557（516-bbga (pbga516) 封裝）的腳位配置。 此數位 IC 包含 GPIO、通訊介面（UART、SPI、I2C）與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料： MPC8272CZQTIEA557.
請參閱 資料表 以查看完整腳位配置。
典型應用
MPC8272CZQTIEA557 適用於 6 應用s: Wired Router and Switch Control Plane, DSLAM Line Card Controller, Industrial Control and Automation Gateway, Telecom Base Station Controller, Defense and Aerospace Embedded Computing, Embedded Network Appliance Platform.
Wired Router and Switch Control Plane
The MPC8272CZQTIEA557's PowerPC G2_LE core at 400 MHz plus the on-chip Communications Processor Module (CPM) make it ideal for routing and switching control-plane tasks. The CPM offloads HDLC, ATM, and Ethernet MAC processing, freeing the core to run a routing stack. Compared with discrete CPU + Ethernet MAC designs, the integrated solution reduces board area, BOM cost, and design risk. Engineers typically pair the MPC8272 with external SDRAM and a PHY transceiver; the device supports 10/100 Mbps MACs natively.
推薦
DSLAM Line Card Controller
DSLAM line cards need deterministic multi-channel serial handling for ATM and HDLC traffic alongside a host control plane. The MPC8272CZQTIEA557's CPM provides multiple FCCs and SCCs that segment ATM cells and forward them to the switching fabric, while the 400 MHz core runs the management interface. Designers gain a proven, field-deployed platform with mature Linux and VxWorks BSPs. The 3.3 V I/O compatibility lets the MPC8272 sit directly on standard telecom backplanes without level shifters.
推薦
Industrial Control and Automation Gateway
Industrial gateways aggregate fieldbus traffic (Profibus, Modbus, CAN) and forward it to Ethernet. The MPC8272CZQTIEA557's SCCs and SMCs provide multi-protocol serial interfaces, while the Ethernet MAC uplinks to factory networks. Its industrial temperature grade and mature software ecosystem let integrators deploy long-life products. Compared with newer ARM Cortex-A5 gateways, the PowerQUICC II is preferred where deterministic serial latency and long-term supply continuity matter more than raw compute.
推薦
Telecom Base Station Controller
Base-station controllers require deterministic multi-channel TDM/E1/T1 handling with a high-reliability control plane. The MPC8272CZQTIEA557's CPM supports TDM, HDLC, and ATM in hardware, while the 400 MHz core runs the management and signaling stack. The PBGA516 package dissipates heat efficiently enough for fanless indoor base-station enclosures. Engineers value the long product lifecycle NXP/Freescale historically supported for telecom programs.
推薦
Defense and Aerospace Embedded Computing
Defense programs value the PowerQUICC II family for its deterministic behavior, mature BSP ecosystem, and the ability to operate reliably in extended-grade temperature ranges. The MPC8272CZQTIEA557 integrates Ethernet, multi-channel serial, and a 32-bit host processor on a single BGA, reducing SWaP-C on ruggedized boards. Defense integrators can run VxWorks, INTEGRITY, or LynxOS-178 and reuse IP across programs because the architecture has been stable for decades.
推薦
Embedded Network Appliance Platform
Small-to-medium embedded network appliances (firewalls, VPN concentrators, edge routers) benefit from the MPC8272CZQTIEA557's integrated Ethernet MAC and serial controllers. The 400 MHz core is sufficient for stateful firewall tables up to several hundred thousand sessions, while the CPM handles WAN-side encapsulation. The part runs Linux with mainline kernel support, allowing OEMs to deploy rapidly without proprietary toolchains. PBGA516 supports miniaturized fanless designs.
推薦
推薦產品摘要
工程參考資料，適用於 MPC8272CZQTIEA557 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MPC8272CVRPIEA | MPC8272CZQTIEA | MPC8280CZQTIEA | MPC8270CZQTIEA | MPC8271CZQTIEA |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | PBGA516 (516-BBGA) | PBGA516 - same | PBGA516 - same | PBGA516 - same | PBGA516 - same | PBGA516 - same |
| Core Speed | 400 MHz | 300-350 MHz (VR grade) | 400 MHz | 450 MHz | 266-300 MHz | 266-300 MHz |
| Core Voltage | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V | 1.5 V |
| I/O Voltage | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V | 3.3 V |
| Ethernet MACs | 10/100 Mbps (two FE MACs) | 10/100 Mbps | 10/100 Mbps | 10/100 Mbps (three FCCs) | 10/100 Mbps (single) | 10/100 Mbps (single) |
| CPM / FCC Count | 2x FCC + multiple SCC/SMC | 2x FCC | 2x FCC | 3x FCC | 1x FCC | 1x FCC |
| USB | USB 2.0 (1 port) | USB 2.0 | USB 2.0 | USB 2.0 | USB 2.0 | USB 2.0 |
| Process Technology | 0.13 µm HiP7 | 0.13 µm HiP7 | 0.13 µm HiP7 | 0.13 µm HiP7 | 0.13 µm HiP7 | 0.13 µm HiP7 |
主要差異化特點
- Integrated Communications Processor Module (CPM) (對比MPC8271CZQTIEA (single FCC))
- Higher core frequency vs older VR speed grade (對比MPC8272CVRPIEA)
- Mature Linux and VxWorks BSP ecosystem (對比MPC8280CZQTIEA (newer but higher cost))
- Pin-to-pin scalable with MPC8280 family (對比MPC8280CZQTIEA)
設計說明
The MPC8272CZQTIEA557 in PBGA516 has a junction-to-ambient thermal resistance in the 15-25 C/W range with proper PCB layout. For reliable industrial operation, provide at least four thermal vias under the die flag and connect to internal copper planes. In fanless telecom enclosures, derate output clock frequencies or add a heatsink if junction-to-ambient exceeds 70 °C in worst-case ambient.
Use microvia or via-in-pad technology for the PBGA516 to escape traces reliably. Match impedance (50 Ω single-ended, 100 Ω differential) on the 60x external bus and Ethernet signals. Place SDRAM as close as possible to the data bus pins to minimize stub length and meet the published AC timings. Bulk-decouple every supply pin with 0.1 µF X7R plus a 10 µF tantalum.
Do not assume pin compatibility between the PowerQUICC II (MPC8272) and the PowerPC 750FX (e.g. 25PPC750FX-FB25F3T) — the latter is a different pinout and lacks the CPM. Also remember the standard MPC8272CZQTIEA557 is NOT lead-free per the datasheet; select the appropriate Pb-free ordering code if RoHS compliance is required for the end product.
The 60x external memory bus runs at 66-100 MHz on the MPC8272. Use IBIS-AMI simulation to validate SI on SDRAM traces. Series-stamp 33 Ω resistors near the driver help dampen reflections. Clocks must be routed on inner layers with continuous reference planes; avoid crossing plane splits.
合規資訊
Datasheet explicitly indicates non-lead-free for the standard MPC8272CZQTIEA557 ordering code. RoHS compliance requires the dedicated Pb-free ordering variant. REACH and conflict-mineral status per NXP product stewardship disclosures.
