XC4VFX60-10FFG1152C Virtex-4 FX FPGA | AMD
MPN: XC4VFX60-10FFG1152C ✗ 停產XC4VFX60-10FFG1152C 概覽
A field-programmable gate array is a semiconductor whose digital functions are defined through a user-programmed configuration rather than fixed mask logic. An FPGA belongs to the broader programmable-logic and semiconductor hierarchy, combining configurable logic blocks, programmable interconnect, block RAM, DSP resources, and general-purpose I/O. The Virtex-4 FX architecture is designed for communications, industrial control, test equipment, image processing, and embedded systems that need hardware flexibility without the cost and cycle time of a custom ASIC.
The XC4VFX60 combines 56,880 logic cells with 576 user I/O, giving a system designer unusually high pin and signal density. Its 1152-pin FCBGA package supports more connections than smaller FPGA packages while preserving a compact board footprint. The -10 speed designation identifies its performance grade, while the G suffix identifies the lead-free package configuration and the C suffix identifies the commercial temperature grade. A detailed, design-specific I/O assignment should always be selected from the complete pinout in the manufacturer documentation.
The device uses 90 nm CMOS technology and belongs to the Advanced Silicon Modular Block architecture family. This architecture combines programmable logic with dedicated arithmetic and memory resources, allowing designers to implement parallel datapaths, protocol controllers, digital filters, and high-speed interface logic in one device. The 1.14 V to 1.26 V operating range defines the core-supply requirement, while the 1152-contact package creates a demanding but deterministic PCB-routing and power-distribution task.
Typical applications include telecommunications line-card control, industrial automation, high-speed data acquisition, communications infrastructure, digital signal processing, and test-and-measurement systems. In each case, the large logic-cell count supports concurrent processing, while 576 I/O provide connections to external converters, memories, clocks, network transceivers, and board-level control logic. The Virtex-4 FX device can also support rapid field updates because its logic configuration is stored and loaded as programmable bitstream data.
The main engineering concern is board implementation rather than circuit simplicity. A 1152-pin BGA requires careful escape routing, multilayer PCB construction, controlled-impedance traces, numerous decoupling connections, and advanced assembly inspection. Power and thermal design must also account for the concentration of programmable resources in a compact package. Existing FPGA designs should verify the exact package drawing, supported I/O standards, configuration interface, memory interfaces, and pin constraints before migration.
This product page combines the key device identity, package, logic, I/O, and supply information with practical selection guidance, equivalent-family alternatives, and implementation considerations. It is intended to help engineers determine whether this large, high-density Virtex-4 FX FPGA is appropriate for a specific logic, connectivity, lifecycle, and PCB requirement.
直接替換替代品,適用於 XC4VFX60-10FFG1152C — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC4VFX60-10FFG1152C (相同外形與佔位) — 差異在於 Device Type.
XC4VFX60-11FFG1152C
✅ 直接替換📋 參考替代品(不在目錄中)
XC4VFX60-10FFG1152I
✅ 直接替換📋 參考替代品(不在目錄中)
XC4VFX60-11FF1152C
✅ 直接替換聯絡詢價
查看資料表 →XC4VFX60-10FF1152C
✅ 直接替換📋 參考替代品(不在目錄中)
XC4VFX60-10FF1152I
✅ 直接替換📋 參考替代品(不在目錄中)
XC4VFX60-10FFG1152C 最大額定值與電氣特性
| Device Type | Virtex-4 FX field-programmable gate array (FPGA) |
| Programmable Logic Cells | 56,880 cells |
| User I/O Count | 576 I/O |
| 封裝 | 1152-pin FCBGA |
| Package Form | 1152-BBGA, FCBGA |
| Contact Count | 1152 contacts |
| Manufacturing Technology | 90 nm CMOS |
| Core Supply Voltage Range | 1.14 V to 1.26 V |
| Performance Speed Grade | -10 |
| Temperature Grade Code | C, commercial |
| Architecture | Advanced Silicon Modular Block (ASMBL) architecture |
| Product Family | Virtex-4 FX |
| 安裝類型 | Surface mount |
| RoHS Compliance | Compliant |
XC4VFX60-10FFG1152C 1152-bbga, fcbga 腳位配置指南
XC4VFX60-10FFG1152C(1152-bbga, fcbga 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC4VFX60-10FFG1152C.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC4VFX60-10FFG1152C 適用於 6 應用s: Telecommunications Line-Card Control, Industrial Automation Controller, High-Speed Data Acquisition, Communications Infrastructure Equipment, Test and Measurement Equipment, Digital Signal Processing.
Telecommunications Line-Card Control
The XC4VFX60-10FFG1152C is suitable for telecommunications line cards that must combine transport logic, packet processing, clocking, and external interfaces in one programmable device. Its 56,880 logic cells provide substantial parallel-processing capacity, while 576 user I/O support clocks, control signals, serial links, status indicators, and board-level management functions. The -10 grade favors designs requiring higher timing performance than the -11 option. A practical implementation should partition deterministic traffic paths from supervisory logic, constrain critical interfaces, and use the complete manufacturer pin table to assign every BGA contact safely.
推薦
Industrial Automation Controller
The XC4VFX60-10FFG1152C can implement a high-channel-count industrial controller where machine I/O, motion sequencing, diagnostics, and safety monitoring must operate concurrently. Its 56,880 logic cells allow parallel control logic to be combined with protocol conversion and event logging, and 576 user I/O reduce the number of external interface devices. Although the C suffix denotes a commercial temperature grade, the device may be used only where environmental conditions remain within its specified limits. For industrial-temperature requirements, the XC4VFX60-10FFG1152I is the corresponding family choice, subject to complete electrical validation.
推薦
High-Speed Data Acquisition
The XC4VFX60-10FFG1152C fits data-acquisition systems that must collect, buffer, filter, and route multiple high-rate data streams. Its 56,880 configurable logic cells support parallel pipelines and preprocessing, while 576 I/O provide connections to ADC and DAC devices, memory, capture logic, clocks, and host interfaces. The -10 performance grade can provide additional timing margin in demanding designs, subject to the applicable speed-grade tables. Engineers should assign registers and DSP resources carefully, control clock skew through the supported clocking resources, and preserve complete decoupling connectivity beneath the 1152-contact FCBGA.
推薦
Communications Infrastructure Equipment
The XC4VFX60-10FFG1152C is appropriate for communications infrastructure equipment requiring configurable protocol handling, traffic aggregation, and extensive backplane connectivity. The 56,880-cell Virtex-4 FX resource count supports concurrent datapaths, while 576 user I/O accommodate line-card interfaces, management signals, clocks, and fabric links. Its large FCBGA package requires careful multilayer routing and power planning, so signal-integrity validation should be performed from the outset. The -10 speed grade is preferable when the timing budget is tighter than the XC4VFX60-11FFG1152C can safely accommodate.
推薦
Test and Measurement Equipment
The XC4VFX60-10FFG1152C can serve in modular test equipment where timing engines, pattern generation, acquisition channels, and analysis pipelines require flexible logic density. Its 56,880 logic cells allow concurrent test sequences and protocol functions, and its 576 I/O provide broad access to instruments, memories, trigger logic, and operator interfaces. The commercial-grade C designation limits environmental use, making thermal verification essential in compact enclosures. Design teams should define timing constraints for every external interface, use supported clock resources, and validate the 1152-pin assembly process before committing to production hardware.
推薦
Digital Signal Processing
The XC4VFX60-10FFG1152C is suitable for parallel digital signal processing when a design requires multiple filters, transforms, correlation functions, or real-time data channels. The Virtex-4 FX device combines 56,880 logic cells with dedicated arithmetic resources, allowing designers to map time-critical operations into DSP blocks while implementing control and interface functions in programmable logic. The -10 grade provides the preferred timing class for demanding pipelines. Designers should consult the exact device resource tables, preserve DSP-to-register timing paths, and implement clocking, decoupling, and ground-plane guidance for the large FCBGA footprint.
推薦
推薦產品摘要
工程參考資料,適用於 XC4VFX60-10FFG1152C — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC4VFX60-11FFG1152C | XC4VFX60-10FFG1152I | XC4VFX60-11FF1152C | XC4VFX60-10FF1152C | XC4VFX60-10FF1152I |
|---|---|---|---|---|---|---|
| Package | 1152-BBGA (FCBGA) | 1152-pin FCBGA | 1152-BBGA (FCBGA) | 1152-BBGA (FCBGA) | 1152-BBGA (FCBGA) | 1152-BBGA (FCBGA) |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Product Family | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX |
| Programmable Logic Cells | 56,880 cells | 56,880 cells | 56,880 cells | 56,880 cells | 56,880 cells | 56,880 cells |
| User I/O Count | 576 I/O | 576 I/O | 576 I/O | 576 I/O | 576 I/O | 576 I/O |
| Speed Grade | -10 | -11 | -10 | -11 | -10 | -10 |
| Temperature Grade | Commercial (C) | Commercial (C) | Industrial (I) | Commercial (C) | Commercial (C) | Industrial (I) |
| Core Supply Voltage | 1.14 V to 1.26 V | 1.14 V to 1.26 V | 1.14 V to 1.26 V | 1.14 V to 1.26 V | 1.14 V to 1.26 V | 1.14 V to 1.26 V |
| Manufacturing Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Package Lead-Free Suffix | G suffix | G suffix | G suffix | Non-G suffix | Non-G suffix | Non-G suffix |
主要差異化特點
- Higher -10 performance class within the XC4VFX60 family (對比XC4VFX60-11FFG1152C)
- Commercial-temperature configuration with a direct industrial alternative (對比XC4VFX60-10FFG1152I)
- High-density 576-I/O interface in a single Virtex-4 FX device (對比XC4VLX60-10FFG668C)
設計說明
Use the exact 1152-contact FCBGA land pattern and AMD escape-routing guidance rather than inferring a footprint from the package name. A multilayer stack-up is generally necessary to connect the 576 user I/O while also routing configuration, clock, differential, and high-speed interfaces. Confirm the ball-pitch details, via-in-pad requirements, solder-mask definition, and assembly-process capability against the package drawing before releasing artwork.
Plan the 1.14 V to 1.26 V core-supply network as a dedicated power domain with low-impedance planes, short return paths, and numerous package-level decoupling connections. Separate supply requirements and the exact power pins from the manufacturer pin table, and validate the voltage at the device under worst-case activity. Do not base the power design on the nominal voltage alone because transient current demand from simultaneous logic, DSP, memory, and I/O activity can challenge the distribution network.
The 1152-pin FCBGA concentrates a large Virtex-4 FX device into a compact package, so board heat spreading and enclosure airflow must be considered together. Use the manufacturer thermal data to select the package-handling and board-construction assumptions, then validate the assembled system at maximum expected activity. Copper planes under the device, through-plane thermal paths, and a controlled enclosure temperature can materially affect reliability, especially when clocking, memory, and I/O operate concurrently.
Assign external clock and high-speed interface pins from the supported I/O rules, and preserve the documented clock-capable and voltage-reference connections. Constrain timing with the correct -10 device speed model, then run post-route timing analysis rather than relying only on synthesis estimates. Differential and multi-lane interfaces should be routed with matched geometry, continuous reference planes, and the stack-up constraints required by the selected interfaces.
Do not treat a same-family ordering code as an automatic substitution: speed grade, temperature grade, package suffix, configuration requirements, and device identifiers must all match the design assumptions. The -11 variant may reduce timing margin relative to the -10 grade, while the I variant changes the temperature class. Before replacing the XC4VFX60-10FFG1152C, compare the complete part tables and confirm that the configuration bitstream and PCB assembly requirements remain unchanged.
合規資訊
The G suffix identifies the lead-free package configuration, and the AMD comparison listing identifies the device as RoHS compliant. REACH, halogen-free status, and conflict-minerals declarations are unknown.