XC7K325T-2FFG676C - 326K Logic Cell Kintex-7 FPGA | AMD
MPN: XC7K325T-2FFG676C ✓ 啟用中XC7K325T-2FFG676C 概覽
A Kintex-7 FPGA is an FPGA, a semiconductor whose digital logic, memory, and signal-processing resources are configured after manufacture. Within the product hierarchy, FPGA belongs to programmable logic and then to integrated circuits. The XC7K325T device combines configurable logic blocks, block RAM, DSP48 resources, high-speed serial transceivers, and programmable I/O to implement complete digital systems on one package.
The XC7K325T family offers several speed grades, including -3, -2, -1, -1L, and -2L. The -2 grade in XC7K325T-2FFG676C provides a performance choice between the highest-speed -3 devices and lower-speed or lower-power variants. Its 326,080 logic cells support parallel datapaths and complex control logic, while 16,020 Kb of block RAM provides on-chip storage for buffering, packet processing, and data movement.
The device includes 840 DSP slices for filtering, fixed-point arithmetic, and other multiply-accumulate workloads. Its 400 I/O expand the interface bandwidth available to external memories, transceivers, and peripherals. The 27 mm × 27 mm FCBGA package also supports high-density interconnect routing, although its 676-ball layout demands careful power distribution, escape routing, and thermal design.
Typical uses include high-speed serial connectivity, network equipment, industrial control, test and measurement, embedded signal processing, and digital communications. The large logic and DSP capacity also makes the device suitable for protocol bridges, high-throughput data acquisition, and accelerator functions that benefit from parallel programmable logic.
PCB implementation requires multiple supply rails, decoupling close to the appropriate power balls, careful termination for high-speed interfaces, and a multilayer stack-up capable of supporting the package escape routes. Configuration and programming infrastructure must also be planned because the device is configured through dedicated configuration resources rather than a fixed application program.
This product overview combines the exact XC7K325T-2FFG676C ordering information with package-specific pinout guidance, drop-in alternatives, application guidance, and practical PCB design considerations for engineers evaluating a Kintex-7 FPGA design.
直接替換替代品,適用於 XC7K325T-2FFG676C — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: XC7K325T-2FFG676C (相同外形與佔位) — 差異在於 Block RAM, Package, Operating Temperature, DSP Slices, Logic Cells.
XC7K325T-2FFG676I
✅ 直接替換✓ 有庫存
$98 / 單位
查看資料表 →XC7K325T-1FFG676C
✅ 直接替換聯絡詢價
查看資料表 →XC7K325T-1FFG676I
✅ 直接替換聯絡詢價
查看資料表 →XC7K325T-2FFG676C 最大額定值與電氣特性
| FPGA Family | Kintex-7 |
| Logic Cells | 326,080 cells |
| Block RAM | 16,020 Kb |
| DSP Slices | 840 slices |
| User I/O | 400 I/O |
| Speed Grade | -2 |
| Core Supply Voltage | 1 V |
| Process Technology | 28 nm |
| 封裝 | FFG676 FCBGA, 676 balls |
| Package Body Size | 27 mm × 27 mm |
| Temperature Grade | Commercial, 0 °C to +85 °C junction |
| 安裝類型 | Surface mount |
| Lead-Free Package | Yes |
XC7K325T-2FFG676C yes 腳位配置指南
XC7K325T-2FFG676C(yes 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC7K325T-2FFG676C.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC7K325T-2FFG676C 適用於 6 應用s: High-Speed Network Interface, Digital Signal Processing Accelerator, Industrial Control and Acquisition, Test and Measurement Instrumentation, Protocol Conversion Bridge, Aerospace and Defense Control System.
High-Speed Network Interface
The XC7K325T-2FFG676C fits network-interface designs that combine packet parsing, control logic, data buffering, and line-rate physical connectivity. Its 326,080 logic cells can support multiple protocol layers concurrently, while 16,020 Kb of block RAM provides packet buffering and descriptor handling. The -2 speed grade supplies additional timing margin for demanding control paths. In a practical implementation, the FPGA sits between network transceivers and host or processing logic, using parallel interfaces for data transfer and dedicated pins for serial links. Designers should allocate resource usage early because transceiver lanes, clocking, and memory interfaces can constrain placement, and should validate protocol timing against the selected reference clock and board-level signal-integrity budget.
推薦
Digital Signal Processing Accelerator
The XC7K325T-2FFG676C is appropriate for a parallel signal-processing accelerator because it combines 840 DSP slices with a large programmable-logic fabric. Filters, correlation, modulation, and fixed-point transforms can be partitioned between DSP pipelines and fabric routing, while 16,020 Kb of block RAM supports parallel sample storage and overlap buffers. The -2 speed grade can improve pipeline clock targets without changing the 676-ball land pattern. A typical implementation connects an ADC or digital sensor through a parallel capture interface, processes samples in streaming fashion, and transfers results over memory or serial interfaces. Power and thermal analysis should reflect actual multiplier utilization because a fully occupied DSP array can consume substantially more dynamic power than logic-only operation.
推薦
Industrial Control and Acquisition
The XC7K325T-2FFG676C can serve as the central controller in industrial acquisition systems that must combine deterministic sampling, protocol handling, local processing, and supervisory control. Its 326,080 logic cells accommodate timing engines and interface state machines, its DSP slices accelerate filters and transformations, and its 400 I/O support external converters and control signals. The commercial 0 °C to +85 °C junction range is appropriate for many indoor industrial systems. During implementation, isolate analog inputs from the FPGA supply and ground domains, use deterministic clocking, and validate every high-speed input against the selected I/O standard. The -2 grade is useful when acquisition and processing must complete within a tight cycle budget, but final timing must be checked over voltage and temperature.
推薦
Test and Measurement Instrumentation
The XC7K325T-2FFG676C fits sophisticated test and measurement instruments that need flexible sequencing, real-time analysis, pattern generation, and high-speed data capture. Programmable logic can implement timing and protocol state machines, the 840 DSP slices can accelerate filters and transforms, and block RAM can support capture buffers. Its 400 I/O allow instrument front ends to interface with converters, trigger logic, and communication controllers. The -2 speed grade favors demanding acquisition and analysis clocks, while the FFG676 package keeps the device compatible with other same-package Kintex-7 options. Engineers should use the manufacturer pinout files to map banks correctly, preserve independent clock-capable and configuration pins, and validate analog or high-speed interface behavior at the board level rather than relying only on simulation.
推薦
Protocol Conversion Bridge
The XC7K325T-2FFG676C is well suited to a protocol-conversion bridge because it can host several interface engines and buffering paths in parallel. A practical bridge may translate between legacy parallel interfaces, memory-mapped buses, and high-speed serial links, using block RAM for temporary buffering and DSP resources only where arithmetic is required. Its large I/O count simplifies simultaneous operation of multiple buses, while the -2 speed grade supports tighter timing targets. Placement is especially important: keep each interface logically adjacent, route clocks with low skew, and avoid dividing unrelated high-speed domains across the device. After board implementation, verify timing at the required voltage and temperature corners and test protocol error handling with real traffic rather than relying only on nominal simulation cases.
推薦
Aerospace and Defense Control System
The XC7K325T-2FFG676C can support high-complexity aerospace, drone, and defense control architectures where programmable logic, DSP, and serial connectivity must operate within one device. The XC7K325T family provides 326,080 logic cells, 840 DSP slices, and extensive I/O for flight-control sequencing, guidance processing, telemetry, and sensor fusion. The commercial ordering code is not automatically suitable for extended-temperature or safety-critical deployment, so qualification, radiation, reliability, and lifecycle requirements must be resolved before design release. Engineers should obtain the applicable AMD military, industrial, or automotive-grade ordering information, perform worst-case timing analysis, and design power and thermal margins for the complete aircraft or ground system. Configuration integrity, watchdog behavior, and fault containment also require system-level review.
推薦
推薦產品摘要
工程參考資料,適用於 XC7K325T-2FFG676C — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC7K325T-2FFG676I | XC7K325T-1FFG676C | XC7K325T-1FFG676I |
|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD |
| Package | FFG676 FCBGA, 676 balls | FFG676 FCBGA, 676 balls | FFG676 FCBGA, 676 balls | FFG676 FCBGA, 676 balls |
| FPGA Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Logic Cells | 326,080 cells | 326,080 cells | 326,080 cells | 326,080 cells |
| Block RAM | 16,020 Kb | 16,020 Kb | 16,020 Kb | 16,020 Kb |
| DSP Slices | 840 slices | 840 slices | 840 slices | 840 slices |
| Speed Grade | -2 | -2 | -1 | -1 |
| Temperature Grade | Commercial, 0 °C to +85 °C junction | Industrial | Commercial, 0 °C to +85 °C junction | Industrial |
| User I/O | 400 I/O | 400 I/O | 400 I/O | 400 I/O |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm |
| Core Supply Voltage | 1 V | 1 V | 1 V | 1 V |
主要差異化特點
- Higher -2 performance grade within the same FFG676 footprint (對比XC7K325T-1FFG676C)
- Commercial-temperature option with the -2 speed grade (對比XC7K325T-2FFG676I)
- One-speed-grade advantage without changing package or temperature class (對比XC7K325T-1FFG676I)
設計說明
Plan the XC7K325T-2FFG676C power tree by separating core, I/O, and auxiliary supply requirements identified in the manufacturer data sheet. Place the required bypass capacitors adjacent to their associated package balls and keep high-current return paths short and wide. Decoupling capacitance, ESR, voltage rating, and the number of power balls must be checked against the selected rail. Because the device supports several speed grades, do not copy a -1 or -1L power plan without recalculating dynamic-current and thermal margins for the -2 design.
Use the AMD Kintex-7 package-device pinout files to create the PCB footprint and escape routes for all 676 balls. Preserve the standard ordering and pin-1 orientation of the FFG676 package, and verify ball-map revisions directly against the design file. A multilayer PCB is strongly preferable for connecting the device's power, configuration, memory, and high-speed interfaces. Recheck the land pattern and escape geometry against the current package drawing before fabrication because even a small ball-map error can affect power, configuration, and high-speed signal integrity.
Evaluate heat flow from the 27 mm × 27 mm FFG676 package using the manufacturer's power-estimation data for the actual clock, logic, DSP, memory, transceiver, and I/O activity. Place thermal vias beneath the package where the footprint and assembly process permit, and use the PCB copper area as part of the thermal path. Run worst-case activity and temperature-corner analysis rather than a nominal design. The 840 DSP slices can raise dynamic power substantially when heavily utilized, so thermal verification should follow logic synthesis and implementation.
Assign memory and high-speed I/O to banks with compatible voltage standards, and follow the AMD pinout and bank-power guidance before signal assignment. Match trace lengths to the interface architecture, use reference planes on adjacent layers, and control impedance through the selected stack-up. Configuration pins, clock-capable pins, and dedicated pins require special attention because incorrect assignment can prevent startup or degrade interface performance. Validate the final board with the intended FPGA tool version and complete IBIS or SPICE-based signal-integrity analysis for critical links.
Do not substitute XC7K325T-1FFG676C, XC7K325T-2FFG676I, or XC7K325T-1FFG676I solely because they use FFG676. Speed-grade changes can alter timing closure and power, while the I suffix changes the temperature class. After any substitution, regenerate the bitstream, rerun static timing and implementation checks, review configuration compatibility, and repeat board-level validation. Also verify that the replacement's exact operating-temperature and qualification requirements satisfy the end application.
合規資訊
The package is described as lead-free. Formal RoHS, REACH, halogen-free, conflict-minerals, and automotive qualification statements were not established for the exact ordering code. The C temperature suffix denotes the commercial-grade ordering option and does not establish AEC-Q100 qualification.