EPM5128LC2 - 128-Macrocell MAX 5000 CPLD, 45ns, 5V | Altera
料号： EPM5128LC2 ⚠ 最后一次采购| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $38.5 | $38.50 |
| 10 | $33.2 | $332.00 |
| 100 | $28.75 | $2,875.00 |
| 500 | $25.1 | $12,550.00 |
| 1,000 | $22.4 | $22,400.00 |
EPM5128LC2 概述
A Complex Programmable Logic Device (CPLD) is a non-volatile programmable logic IC that combines the integration density of an FPGA with the deterministic timing and instant-on behavior of classic PAL/GAL architectures. Within the broader semiconductor hierarchy, CPLDs sit alongside FPGAs under the programmable-logic umbrella, but unlike SRAM-based FPGAs they retain their configuration in on-chip EPROM/EEPROM cells and require no external boot memory. The MAX 5000 series specifically targets TTL-compatible, 5 V-only glue-logic consolidation and bus-interface replacement in industrial control, telecommunications, and legacy computer designs.
Key features of the EPM5128LC2 include 128 macrocells, 8 LABs linked by a global PIA, 1 dedicated global clock input plus shared input/clock pins, JTAG/IEEE 1149.1 boundary-scan support, and an extended operating temperature grade. The device is offered in a Pin-Grid-Array (PGA) ceramic package suitable for socketed or through-hole industrial assemblies, with the 'LC2' suffix indicating the lower-power CMOS process and the commercial speed/power grade.
Architecturally, the MAX 5000 device uses an EPROM-based configuration cell so the programmed logic is retained without power, enabling true instant-on behavior at power-up - a defining advantage over SRAM FPGAs in deterministic boot applications. Each macrocell contains a programmable AND/OR array with a flip-flop, and the deterministic PIA routing provides predictable, fixed propagation delays that simplify static timing closure in control and interface designs.
Typical applications include TTL/74-series glue-logic consolidation in industrial controllers, address decoding and bus interfacing in legacy x86 and embedded CPU designs, state-machine and sequencer replacement in telecommunications line cards, and I/O expansion for microprocessor-based systems. The 5 V supply, ceramic packaging, and -40 C to +85 C extended commercial operating range also suit it to harsh-environment industrial equipment.
When designing with the EPM5128LC2, engineers should note that the MAX 5000 family has been classified as mature/EOL by Altera (now part of Intel), so long-term production planning and last-time-buy windows must be confirmed with the manufacturer before committing to new designs. Use the Altera MAX+PLUS II or Altera Quartus legacy support tools for design entry, fitting, and programming of this older device.
This page synthesizes distributor pricing, same-brand drop-in alternatives from the MAX 5000 family, and practical design notes that go beyond what the manufacturer datasheet alone provides.
直接替换替代料： EPM5128LC2 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： EPM5128LC2 （相同外形与封装尺寸） ——差异在于 Package, Propagation Delay (tPD), Process Technology, Device Type, Supply Voltage (VCC).
快速对比工具——选择替代料号进行并排对比：
EPM5128LC-1
✅ 直接替换✓ 有现货
$8.2 / 个
查看数据手册 →EPM5128GC2
✅ 直接替换✓ 有现货
$54 / 个
查看数据手册 →EPM5128GC-1
✅ 直接替换✓ 有现货
$18.95 / 个
查看数据手册 →EPM5128GC-2
✅ 直接替换✓ 有现货
$8.95 / 个
查看数据手册 →EPM5128JC
✅ 直接替换✓ 有现货
$9.75 / 个
查看数据手册 →EPM5128JC-2
✅ 直接替换✓ 有现货
$21.75 / 个
查看数据手册 →EPM5128LC2 最大额定值与电气特性
| Family | MAX 5000 |
| Device Type | CPLD (Complex Programmable Logic Device) |
| Macrocells | 128 |
| Logic Array Blocks (LABs) | 8 |
| Interconnect | Programmable Interconnect Array (PIA) |
| Global Clock Inputs | 1 dedicated |
| Propagation Delay (tPD) | 45 ns |
| Supply Voltage (VCC) | 5 V |
| Process Technology | CMOS EPROM |
| Configuration Memory | On-chip EPROM (non-volatile) |
| Boundary Scan | JTAG / IEEE 1149.1 |
| 工作温度 | -40 C to +85 C (extended commercial) |
| 封装 | PGA (Pin Grid Array, ceramic) |
| 安装类型 | Through-Hole / Socketed |
EPM5128LC2 pga (pin grid array, ceramic) 引脚配置指南
EPM5128LC2（pga (pin grid array, ceramic) 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： EPM5128LC2.
请参阅 数据手册 以查看完整引脚配置。
典型应用
EPM5128LC2 适用于 7 应用s: TTL/74-Series Glue Logic Consolidation, Address Decoding and Bus Interfacing, State Machine and Sequencer Replacement, Industrial Control I/O Expansion, Legacy Computer Board Repair and Retrofit, Telecommunications Line-Card Glue Logic, Test and Measurement Front-End Logic.
TTL/74-Series Glue Logic Consolidation
The EPM5128LC2 consolidates dozens of 74-series TTL packages (decoders, muxes, latches, AND/OR gates) into a single 128-macrocell CPLD, reducing board area and BOM count in industrial controllers. Its 45 ns pin-to-pin delay matches TTL propagation times so legacy timing budgets remain valid, while the EPROM-based non-volatile configuration eliminates the need for a separate boot PROM and provides instant-on behavior at power-up, critical for deterministic industrial control loops.
推荐
Address Decoding and Bus Interfacing
The EPM5128LC2 is well suited to legacy address decoding and bus-interface tasks in 8086/80186/68000 CPU systems where its 128 macrocells handle 16- to 24-bit address maps with several chip-select outputs. The deterministic PIA routing produces predictable, fixed propagation delays that simplify worst-case timing analysis for memory and peripheral read/write cycles. The 5 V TTL-compatible I/Os mate directly with industry-standard buses without level shifters.
推荐
State Machine and Sequencer Replacement
The EPM5128LC2 replaces discrete PAL/GAL sequencers with a single device offering up to 128 macrocells, each with a programmable flip-flop - sufficient for complex multi-state control machines in telecom line cards and test equipment. Its 45 ns tPD plus deterministic PIA routing enables tight state-to-state transitions without metastability concerns, while the EPROM configuration retains the state machine definition through power cycles for instant restart in unattended equipment.
推荐
Industrial Control I/O Expansion
In PLC-style industrial controllers, the EPM5128LC2 expands a microcontroller's I/O count by handling matrix-key scanning, relay/SSR drivers, optocoupler interfacing, and pulse-width modulation at modest rates. The 5 V supply aligns with industrial 5 V backplanes, the -40 C to +85 C extended commercial range covers factory-floor environments, and the ceramic PGA package supports socketed field replacement to minimize downtime on legacy lines.
推荐
Legacy Computer Board Repair and Retrofit
The EPM5128LC2 is widely used to repair and retrofit legacy VME, ISA, and Multibus-based computer boards whose original discrete-logic or obsolete PROM-based controllers have become unobtainable. The ceramic PGA package allows socketed replacement, while the EPROM-based non-volatile configuration means a programmed device powers up in the correct state without external boot support. Industrial users keep this part in service for sustaining legacy systems.
推荐
Telecommunications Line-Card Glue Logic
In telecommunications line cards and channel banks, the EPM5128LC2 implements framing, alarm monitoring, and switch-matrix control logic between the line interface and the central processor. Its 128 macrocells handle several alarm inputs and switch-matrix outputs in a single device, while the deterministic 45 ns delay and 5 V TTL I/O simplify interface to legacy T1/E1 framers. Non-volatile EPROM configuration supports instant-on boot in unattended central-office equipment.
推荐
Test and Measurement Front-End Logic
Bench-top test instruments and ATE front-ends use the EPM5128LC2 to implement scan-path control, relay-matrix drivers, range switching, and trigger logic. Its 128 macrocells handle complex trigger sequences and matrix addressing without resorting to FPGAs, and the 45 ns delay fits the timing of mid-speed analog multiplexers. The JTAG/IEEE 1149.1 boundary-scan interface simplifies board-level test access during production.
推荐
推荐产品汇总
工程参考数据： EPM5128LC2 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | EPM5128LC-1 | EPM5128GC2 | EPM5128GC-1 | EPM5128GC-2 | EPM5128JC | EPM5128JC-2 |
|---|---|---|---|---|---|---|---|
| Brand | Altera | Altera | Altera | Altera | Altera | Altera | Altera |
| Package | PGA (ceramic) | PGA (ceramic) | PGA (ceramic) | PGA (ceramic) | PGA (ceramic) | PLCC (plastic J-lead) | PLCC (plastic J-lead) |
| Macrocells | 128 | 128 | 128 | 128 | 128 | 128 | 128 |
| Propagation Delay (tPD) | 45 ns | 35 ns | 45 ns | 35 ns | 45 ns | 35 ns | 45 ns |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Temperature Grade | Extended Commercial | Extended Commercial | Wider-Temp Commercial | Wider-Temp Commercial | Wider-Temp Commercial | Commercial (plastic) | Commercial (plastic) |
| Process / Power | Low-power CMOS (L) | Low-power CMOS (L) | Standard CMOS (G) | Standard CMOS (G) | Standard CMOS (G) | Standard CMOS (J) | Standard CMOS (J) |
| Boundary Scan (JTAG) | Yes (IEEE 1149.1) | Yes (IEEE 1149.1) | Yes (IEEE 1149.1) | Yes (IEEE 1149.1) | Yes (IEEE 1149.1) | Yes (IEEE 1149.1) | Yes (IEEE 1149.1) |
| Configuration Memory | EPROM (non-volatile) | EPROM (non-volatile) | EPROM (non-volatile) | EPROM (non-volatile) | EPROM (non-volatile) | EPROM (non-volatile) | EPROM (non-volatile) |
关键差异点
- Faster tPD in same ceramic PGA package （对比 EPM5128LC-1)
- Low-power CMOS grade for reduced Icc （对比 EPM5128GC2)
- Ceramic PGA package for high reliability （对比 EPM5128JC)
设计说明
Estimated: confirm with Altera/Intel before committing to a new design - the MAX 5000 family is classified as mature/last-time-buy, and the EPM5128LC2 is generally available only as excess stock from secondary-market distributors. For new designs, choose MAX 7000, MAX II, MAX V, or Lattice ispMACH 4000 parts to avoid premature obsolescence of the production line.
Use a high-quality PGA socket (e.g., machined-pin) for the ceramic PGA package to allow field replacement, because the ceramic body is brittle and direct soldering risks thermal-crack failures during rework. Provide generous keep-out around the PGA footprint for socket clearance and for the EPROM-programmer clip if you intend to re-program in place.
The MAX 5000 family PIA architecture produces deterministic, fixed propagation delays - this is an advantage for static timing closure in control logic, but the 45 ns tPD is too slow for high-speed memory or bus interfaces above ~20 MHz. For timing-critical paths, choose the faster -1 sub-grade (35 ns tPD) or move to a MAX 7000A/MAX II device.
The 'L' (low-power) grade of the EPM5128LC2 reduces Icc versus the 'G' and 'J' grades, but the EPROM-programming and erase currents during in-system programming are higher than normal operating current. Decouple VCC with a 0.1 uF ceramic plus a 10 uF tantalum placed close to the PGA pins, and reserve programming-current headroom in the 5 V rail design.
Estimated: at 5 V TTL levels, the EPM5128LC2 drives lightly-loaded buses; place termination only if the trace length exceeds ~6 inches or if you switch >50 pF of load. JTAG boundary-scan pins (TDI, TDO, TMS, TCK) must be accessible for production test - route them to a header or test pad rather than to internal-only nets.
合规信息
The EPM5128LC2 is a legacy Altera ceramic PGA part; RoHS/REACH/lead-free status is not confirmed in the available web data and is marked as [DATA_NEEDED] in the specs. For production use, request the latest material-composition declaration from the franchised distributor. AEC-Q100 is not applicable because this is a commercial-grade CPLD, not an automotive-qualified part.
