EPM570M100I5 - MAX II CPLD 440 Macrocell 100-MBGA | Intel
料号： EPM570M100I5 ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $14.5 | $14.50 |
| 10 | $13.2 | $132.00 |
| 100 | $11.85 | $1,185.00 |
| 500 | $10.4 | $5,200.00 |
| 1,000 | $9.1 | $9,100.00 |
EPM570M100I5 概述
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic IC that sits between simple PAL/GAL devices and full FPGAs. In the broader hierarchy it belongs to programmable logic, which is itself a branch of standard logic ICs. MAX II devices use a look-up table (LUT) based architecture combined with a non-volatile flash configuration memory, eliminating the external boot PROM normally required by SRAM-based FPGAs. Compared with classic CPLDs, MAX II offers lower static power, higher logic density, and a built-in User Flash Memory (UFM) block for storing user data such as serial numbers or calibration tables.
Key features of the EPM570M100I5 include 440 macrocells (equivalent to 570 logic elements), 76 user I/O pins, a MultiVolt I/O bank that supports 1.5V, 1.8V, 2.5V, and 3.3V interfaces, a User Flash Memory block of 8 Kbits, and IEEE 1149.1 JTAG plus in-system programmability. The I5 speed grade corresponds to a -40 °C to +100 °C commercial operating range.
Typical applications include I/O expansion and bridging for microcontrollers and processors, glue logic replacement for ASIC/FPGA designs, power-sequence and reset control, bus interface translation (for example 3.3V to 1.8V level shifting), and LED driving or display control where deterministic timing and instant-on behavior are required.
When designing with this part, note that MAX II devices are 3.3V tolerant only on JTAG pins and require proper MultiVolt I/O bank configuration. The internal flash memory configuration makes the part suitable for safety-critical and industrial applications where instant-on logic is required at power-up.
This page synthesizes distributor pricing, drop-in MAX II alternatives, and design notes not found in the manufacturer datasheet.
直接替换替代料： EPM570M100I5 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： EPM570M100I5 （相同外形与封装尺寸） ——差异在于 Operating Temperature, Package, Process Technology, Programming Interface, Mounting Type.
快速对比工具——选择替代料号进行并排对比：
EPM570M100I5N
✅ 直接替换✓ 有现货
$8.75 / 个
查看数据手册 →EPM570M100C5N
✅ 直接替换✓ 有现货
$11.85 / 个
查看数据手册 →EPM570GT100I5N
✅ 直接替换✓ 有现货
$16.5 / 个
查看数据手册 →EPM570GM100I5N
✅ 直接替换✓ 有现货
$8.55 / 个
查看数据手册 →EPM570F100I5N
✅ 直接替换✓ 有现货
$13.4 / 个
查看数据手册 →EPM570M100C4N
✅ 直接替换✓ 有现货
$14.95 / 个
查看数据手册 →EPM570M100I5 最大额定值与电气特性
| Family | MAX II |
| Device Type | CPLD (Complex Programmable Logic Device) |
| Macrocells | 440 |
| Logic Elements | 570 |
| Maximum User I/O | 76 |
| User Flash Memory (UFM) | 8 Kbits |
| Process Technology | 0.18 µm flash |
| Supply Voltage - Core | 1.8 V |
| Supply Voltage - I/O (MultiVolt) | 1.5 V / 1.8 V / 2.5 V / 3.3 V |
| Internal Performance | 201.1 MHz |
| 工作温度 | -40 °C to +100 °C (I5 grade) |
| 封装 | 100-ball Micro FBGA (MBGA), 6 mm x 6 mm |
| 安装类型 | Surface Mount |
| Programmability | JTAG (IEEE 1149.1) + ISP |
| Configuration Memory | Internal non-volatile flash |
| RoHS 状态 | Compliant |
EPM570M100I5 100-ball micro fbga (mbga), 6 mm x 6 mm 引脚配置指南
EPM570M100I5（100-ball micro fbga (mbga), 6 mm x 6 mm 封装）的引脚配置。 该数字 IC 包含 GPIO、通信接口（UART、SPI、I2C）和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据： EPM570M100I5.
请参阅 数据手册 以查看完整引脚配置。
典型应用
EPM570M100I5 适用于 6 应用s: Microcontroller I/O Expansion and Bus Bridging, Industrial Control and Factory Automation Logic, Power Sequencing and Reset Management, Communications Equipment Glue Logic, Display and LED Driver Control, Legacy ASIC/FPGA Replacement and Design Modernization.
Microcontroller I/O Expansion and Bus Bridging
The EPM570M100I5's 440 macrocells and 76 user I/Os make it ideal for expanding microcontroller or low-pin-count processor I/O. Its MultiVolt I/O banks (1.5V/1.8V/2.5V/3.3V) allow direct connection between processors, memories, and peripherals operating at different voltages, replacing dozens of discrete logic ICs. The 201.1 MHz internal performance and 8 Kbit User Flash Memory provide deterministic timing and on-chip non-volatile parameter storage. Drop-in upgrade paths exist within the same 100-ball MBGA footprint.
推荐
Industrial Control and Factory Automation Logic
With its -40 °C to +100 °C industrial operating range and non-volatile instant-on configuration, the EPM570M100I5 is well suited to factory automation controllers, PLC I/O modules, and sensor interface boards. The 100-ball MBGA package provides a compact footprint for high-density logic on controller PCBs. Designers can implement deterministic glue logic, encoder interfacing, and timing-critical control sequences that must execute at power-up without boot delay.
推荐
Power Sequencing and Reset Management
Power-up sequencing is a classic MAX II use case, and the EPM570M100I5's instant-on non-volatile flash configuration ensures sequencing logic runs from the first valid supply cycle. The 8 Kbit UFM can retain configuration parameters such as timing thresholds or board revision data. MultiVolt I/O banks let a single CPLD interface 1.8V SoCs, 3.3V peripherals, and 5V-tolerant supervisory devices from the same die.
推荐
Communications Equipment Glue Logic
In networking line cards, base stations, and telecom infrastructure, the EPM570M100I5 implements glue logic between PHYs, switches, FPGAs, and processors. Its 76 user I/Os and MultiVolt support let it bridge between 1.8V FPGA transceivers and 3.3V management interfaces. Deterministic 201.1 MHz timing and JTAG ISP support simplify board-level bring-up, manufacturing test, and field reprogramming.
推荐
Display and LED Driver Control
The EPM570M100I5 is used as a scan and refresh controller for LED matrices, signage, and small LCD panels. Its 440 macrocells can generate PWM channels, multiplexing waveforms, and color-mixing sequences while the 8 Kbit UFM stores gamma tables or animation frames. The industrial temperature grade supports outdoor display installations where temperatures may swing from -40 °C to +70 °C.
推荐
Legacy ASIC/FPGA Replacement and Design Modernization
Designers use the EPM570M100I5 to replace obsolete discrete logic, ASICs, or older CPLDs in long-lifecycle programs. Its flash configuration is non-volatile and reprogrammable in-circuit via JTAG, reducing manufacturing cost versus one-time-programmable devices. The same 100-ball MBGA footprint across EPM570 variants enables PCB reuse during design refreshes or component obsolescence mitigation.
推荐
推荐产品汇总
工程参考数据： EPM570M100I5 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | EPM570M100I5N | EPM570M100C5N | EPM570GT100I5N | EPM570GM100I5N | EPM570F100I5N |
|---|---|---|---|---|---|---|
| Package | 100-ball Micro FBGA (MBGA) | 100-ball Micro FBGA (MBGA) - same | 100-ball Micro FBGA (MBGA) - same | 100-ball Micro FBGA (MBGA) - same | 100-ball Micro FBGA (MBGA) - same | 100-ball Micro FBGA (MBGA) - same |
| Brand | Intel | Intel - same | Intel - same | Intel - same | Intel - same | Intel - same |
| Macrocells | 440 | 440 | 440 | 440 | 440 | 440 |
| Logic Elements | 570 | 570 | 570 | 570 | 570 | 570 |
| User I/O | 76 | 76 | 76 | 76 | 76 | 76 |
| Operating Temperature | -40 °C to +100 °C (I5 industrial) | -40 °C to +100 °C (I5 industrial) | 0 °C to +85 °C (C5 commercial) | -40 °C to +100 °C (I5 industrial) | -40 °C to +100 °C (I5 industrial) | -40 °C to +100 °C (I5 industrial) |
| Supply Voltage (Core) | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| Lead-Free / RoHS | Non-N (legacy finish); N suffix is RoHS | Yes (RoHS, Pb-free) | Yes (RoHS, Pb-free) | Yes (RoHS, Pb-free) | Yes (RoHS, Pb-free) | Yes (RoHS, Pb-free) |
关键差异点
- Same-package drop-in with lead-free finish （对比 EPM570M100I5N)
- Higher operating temperature range （对比 EPM570M100C5N)
- Larger macrocell count than legacy MAX 7000 devices （对比 EPM240 / EPM570 older variants in different packages)
设计说明
The EPM570M100I5 requires a clean 1.8 V core supply (VCCINT) and one or more VCCIO bank supplies selected from 1.5V, 1.8V, 2.5V, or 3.3V. Decoupling: place 0.1 µF X7R ceramic capacitors close to every VCCINT and VCCIO ball, with at least one bulk 10 µF tantalum or ceramic capacitor per supply rail. Power-up monotonicity must be maintained on VCCINT before JTAG configuration begins. Voltage tolerance on JTAG pins differs from regular I/O - consult the MAX II datasheet before back-driving JTAG lines.
Estimated: at the maximum I5 ambient of 100 °C with all 76 I/Os toggling at 100 MHz, the EPM570M100I5's MBGA-100 package dissipates roughly 200-300 mW. With a typical θJA of 35-45 °C/W for a 100-ball MBGA on a 4-layer JEDEC board, junction-to-ambient rise is approximately 7-14 °C. For sealed industrial enclosures with limited airflow, design the PCB with thermal vias under the center balls and stitch the inner ground plane to spread heat. Always verify against the latest Altera/Intel thermal model for the specific speed grade.
The 100-ball Micro FBGA uses a 0.5 mm or 0.4 mm pitch ball array. PCB design must use laser-drilled micro vias, ENIG or OSP surface finish, and 0.4 mm-wide escape traces between balls. Maintain a reference ground plane under the package and stitch vias around the BGA perimeter to control return paths for high-speed I/O. For JTAG, route TCK, TMS, TDI, and TDO as a bus with matched lengths to within 25 mm and a 10 kΩ pull-up on TCK/TMS/TDI as the datasheet recommends.
Common pitfalls: (1) Do not apply 3.3 V to VCCIO banks that are configured for 1.5 V or 1.8 V logic - this damages the I/O cells. (2) Do not omit the nCONFIG or nCE pull-up resistors, or the device will fail to enter user mode. (3) Do not assume I5 (industrial) and C5 (commercial) parts are interchangeable - the temperature range drops from -40/+100 °C to 0/+85 °C. (4) Do not program the UFM block without first reserving logic capacity in the Quartus fitter report - the UFM consumes macrocell resources adjacent to its block.
合规信息
EPM570M100I5N suffix variant is lead-free / RoHS compliant; non-N EPM570M100I5 uses legacy finish. Industrial -40 °C to +100 °C operating range per I5 grade. AEC-Q100 qualification not applicable - MAX II CPLDs are not automotive-grade qualified. REACH compliance confirmed per Intel product declaration.
