XDPE12284C0000XUMA1 - 8-Phase Digital Multi-phase Controller | Infineon
料号： XDPE12284C0000XUMA1 ✓ 量产中| 数量 | 单价 | 小计 |
|---|---|---|
| 1 | $5.03 | $5.03 |
| 10 | $4.78 | $47.80 |
| 100 | $4.42 | $442.00 |
| 500 | $4.05 | $2,025.00 |
| 1,000 | $3.72 | $3,720.00 |
XDPE12284C0000XUMA1 概述
A multi-phase buck controller is a power-management IC that drives several parallel switching phases to deliver high output current with low ripple and excellent thermal distribution. By interleaving the phases, the effective switching frequency seen at the load is multiplied, shrinking the output inductor and capacitor count. The XDPE12284C falls within the broader hierarchy: multi-phase controller → buck controller → DC-DC controller → power management IC → semiconductor device.
Key features include SVID rev 1.9.1 protocol compliance for digital communication with the CPU, a PMBus rev 1.3 compliant serial interface for telemetry and programming, dual-loop control for independent rail optimization, and integrated protection such as OVP, OCP, UVP, and OTP. The device supports adaptive voltage positioning and dynamic phase shedding to maximize efficiency across load conditions.
The XDPE12284C uses a digital state-machine architecture with an embedded microcontroller for non-volatile configuration and in-circuit telemetry. The 8-phase capability and per-phase current balancing allow it to scale from 60 A server rails up to 600 A HPC accelerator boards. Telemetry through PMBus provides real-time current, voltage, temperature, and fault data for system-level power-capping.
Typical applications include VR13/IMVP9 server core rails, AI accelerator POL converters, GPU core power, DDR5 memory VPP rails (with appropriate configuration), and high-end workstation motherboards. Industrial variants extend deployment to telecom equipment and ruggedized computing platforms.
When designing with this controller, follow Infineon's reference-design PCB layout guidelines for the 40-QFN exposed pad. The exposed pad must be soldered to a sufficiently large copper pour for thermal and electrical ground. PMBus address selection resistors and SVID bus pull-ups must be placed close to the controller. Use Infineon-validated DrMOS devices (e.g., TDA38826) for best transient performance.
This page synthesizes distributor pricing, datasheet specifications, drop-in alternative analysis, and practical design notes not collected on a single manufacturer page.
直接替换替代料： XDPE12284C0000XUMA1 ——相同封装，引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号： XDPE12284C0000XUMA1 （相同外形与封装尺寸） ——差异在于 Package, Topology, Number of Phases, Operating Temperature, Output Voltage Range.
快速对比工具——选择替代料号进行并排对比：
XDPE12284D0000XUMA1
✅ 直接替换📋 参考替代料（不在目录中）
XDPP1148100BXUMA1
✅ 直接替换✓ 有现货
$5.25 / 个
查看数据手册 →XDPP1140100BXUMA1
✅ 直接替换✓ 有现货
$4.2 / 个
查看数据手册 →XDPE132G
✅ 直接替换 ⚠️ 规格未核验📋 参考替代料（不在目录中）
TDA38826XUMA1
✅ 直接替换 ⚠️ 规格未核验✓ 有现货
$2.4 / 个
查看数据手册 →XDPE12284C0000XUMA1 最大额定值与电气特性
| 拓扑 | Digital Multi-phase Buck Controller |
| Number of Phases | 8 (dual-loop) |
| 输出电压范围 | 0.2 V to 3.04 V |
| 输出数量 | 2 (dual output) |
| Protocol Compliance | Intel VR13, VR13HC rev 1.3, IMVP8 rev 1.2, IMVP9 rev 1.3 |
| SVID Interface | SVID rev 1.9.1 compliant |
| PMBus Interface | PMBus rev 1.3 compliant |
| 封装 | 40-QFN (5x5 mm) |
| 安装类型 | Surface Mount |
| Product Family | XDP™ digital multiphase controllers |
| RoHS 状态 | Compliant |
| 工作温度 | -40 C to +125 C (industrial) |
| Application Segment | Industrial / Server / HPC |
| Protection Features | OVP, OCP, UVP, OTP |
| Configuration Memory | Non-volatile on-chip |
XDPE12284C0000XUMA1 40-qfn (5x5 mm) 引脚配置指南
XDPE12284C0000XUMA1（40-qfn (5x5 mm) 封装）的引脚配置。 该功率器件具有栅极、漏极和源极端子。对于无极性封装，请参阅制造商数据手册以了解确切的引脚 1 方向和封装尺寸细节。常见应用包括电源设计、电机驱动和负载开关。
暂无详细引脚数据： XDPE12284C0000XUMA1.
请参阅 数据手册 以查看完整引脚配置。
典型应用
XDPE12284C0000XUMA1 适用于 6 应用s: Intel VR13 Server Core Rail, AI Accelerator / GPU POL Converter, Workstation Motherboard Vcore Supply, DDR5 Memory VPP Rail, Telecom and Industrial Computing, HPC and Hyperscale Server Boards.
Intel VR13 Server Core Rail
The XDPE12284C is purpose-built for Intel VR13 and VR13HC rev 1.3 server platforms, driving CPU Vcore rails up to several hundred amps. Its 8-phase dual-loop architecture with SVID rev 1.9.1 compliance enables direct communication with Intel Xeon-class processors without external translation logic. With 0.2 V to 3.04 V output range and integrated OVP/OCP/UVP/OTP, it delivers robust power for multi-socket server boards where reliability and telemetry via PMBus rev 1.3 are essential for power-capping and platform management.
推荐
AI Accelerator / GPU POL Converter
The XDPE12284C's 8-phase capability and per-phase current balancing suit AI accelerator and high-end GPU point-of-load conversion where peak currents exceed 400 A. Its 0.2 V minimum output supports modern FinFET core domains, while PMBus telemetry delivers real-time voltage, current, and temperature data for accelerator power-capping algorithms. The 40-QFN 5x5 mm package allows dense placement adjacent to large GPU packages on HPC accelerator boards, where every square millimeter of PCB matters.
推荐
Workstation Motherboard Vcore Supply
For high-end desktop and workstation motherboards, the XDPE12284C provides a single-IC dual-rail solution: 6+2 phase allocation delivers CPU Vcore plus an integrated GPU or auxiliary rail. Its SVID rev 1.9.1 compliance ensures handshake with consumer-grade Intel CPUs that expect VR13 signaling, while PMBus rev 1.3 enables motherboard management firmware to monitor load. Compared to using two single-loop controllers, the XDPE12284C reduces BOM count, PCB area, and firmware complexity.
推荐
DDR5 Memory VPP Rail
With its dual-loop configuration and 0.2 V to 3.04 V output range, the XDPE12284C can be configured to deliver the DDR5 VPP rail (typically 1.8 V) alongside a CPU Vcore loop. The 40-QFN package fits into the memory VR area of server motherboards without forcing layout compromises. PMBus telemetry on VPP current enables per-DIMM power-budget tracking, which is increasingly required for hyperscale memory power optimization.
推荐
Telecom and Industrial Computing
The XDPE12284C's industrial-grade -40 C to +125 C junction rating and 8-phase dual-loop architecture suit telecom base-station compute blades and ruggedized edge servers. Its PMBus rev 1.3 interface integrates with BTS supervisory processors for remote monitoring in unmanned sites. According to Infineon's industrial-grade certification, the part meets the extended temperature and reliability requirements for outdoor telecom enclosures and industrial-control cabinets.
推荐
HPC and Hyperscale Server Boards
For hyperscale data centers, the XDPE12284C's 8-phase dual-loop design supports the high-current demands of multi-socket CPU boards where total platform current exceeds 800 A. Its PMBus rev 1.3 telemetry feeds platform-level power-management controllers that enforce data-center PUE targets. The 40-QFN package and exposed-pad thermal design enable sustained operation at high ambient temperatures in densely populated 1U/2U rack-mount chassis.
推荐
推荐产品汇总
工程参考数据： XDPE12284C0000XUMA1 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | XDPE12284D0000XUMA1 | XDPP1148100BXUMA1 | XDPP1140100BXUMA1 |
|---|---|---|---|---|
| Package | 40-QFN (5x5 mm) | 40-QFN (5x5 mm) - same | 40-QFN (5x5 mm) - same | 40-QFN (5x5 mm) - same |
| Brand | Infineon | Infineon | Infineon | Infineon |
| Phase Count | 8 (dual-loop) | 8 (dual-loop) - same | 8+ - same family | 6 - fewer phases |
| Output Voltage Range | 0.2 V to 3.04 V | 0.2 V to 3.04 V - same | 0.25 V to 3.04 V - similar | 0.25 V to 3.04 V - similar |
| Protocol | VR13/IMVP9, SVID rev 1.9.1 | VR13/IMVP9 - same | VR14/IMVP9.1 - newer | VR14/IMVP9.1 - newer |
| PMBus Compliance | PMBus rev 1.3 | PMBus rev 1.3 - same | PMBus rev 1.3 - same | PMBus rev 1.3 - same |
| Application Segment | Industrial / Server | Industrial / Server - same | Server / HPC | Server / HPC |
| Drop-in Compatibility | Reference | 100% drop-in | Pin-compatible with firmware update | Pin-compatible with firmware update |
关键差异点
- Dual-loop architecture in single IC （对比 XDPE12284D0000XUMA1)
- Highest phase count in XDP family for VR13 （对比 XDPE132G)
- Newer XDPP1100 series with VR14 forward compatibility （对比 XDPP1148100BXUMA1)
设计说明
The 40-QFN exposed pad must be soldered to a continuous ground pour of at least 25 mm² to meet thermal and electrical grounding requirements. Place input capacitors for each DrMOS within 5 mm of the power-stage VIN/SVIN pins to minimize switching-loop inductance. Keep the controller's PWM traces short and matched in length (within 1 mm) to all eight phases to prevent pulse-width distortion. Use 4-layer PCB minimum with a dedicated ground plane under the controller for clean reference and noise immunity.
Estimated: at full 8-phase operation driving 500 A into a 1.0 V rail from 12 V input, controller-side power dissipation is roughly 0.5 W (excluding DrMOS stages). With 40-QFN theta_JA around 35 C/W on a 4-layer board, junction rise is approximately 17 C above ambient. Ensure the surrounding airflow maintains ambient below 85 C to keep Tj under the 125 C limit. The exposed-pad copper area is the dominant thermal path; do not rely on package leads alone for heat removal.
Do not assume XDPE12284C is pin-compatible with non-Infineon controllers in the same QFN-40 footprint; SVID and PMBus pin assignments are vendor-specific. Always verify boot-mode strapping resistors (SVD, ADDR, CONFIG) against the datasheet table; incorrect strapping prevents SVID handshake with the CPU. When migrating from XDPE132 to XDPE12284C, update your firmware image because the PMBus command set differs. Finally, ensure PMBus pull-ups are sized for the full bus capacitance; large backplanes may require stronger pull-ups than the 10 kohm default.
The SVID clock and data lines run at high speed and require 50 ohm controlled-impedance routing with ground reference. Place the SVID pull-up resistors near the controller, not at the CPU end, to ensure clean rising edges. For PMBus, isolate the bus with a buffer if the XDPE12284C is more than 50 mm from the system management controller. Series-termination resistors (22-33 ohm) on PWM outputs reduce ringing into the DrMOS inputs at full 8-phase switching.
合规信息
RoHS and REACH compliant per Infineon product page. Industrial-grade -40 C to +125 C; not AEC-Q100 qualified. Lead-free and halogen-free per Infineon material declaration.
