MRF7S18170HR3 vs MRF7S19080HR3 مقارنة
مقارنة تفصيلية جنبًا إلى جنب لـ MRF7S18170HR3 بواسطة NXP Semiconductors و MRF7S19080HR3 بواسطة NXP Semiconductors. قارن المواصفات الرئيسية والمعلمات الكهربائية والتغليف وحالة دورة الحياة والأسعار والتوافر لتحديد أفضل مكوّن لمتطلبات تصميمك.
NXP Semiconductors
MRF7S18170HR3 - 50W 1.81GHz RF Power LDMOS | NXP Semiconductors
MRF7S18170HR3 ✓ نشطNXP Semiconductors
MRF7S19080HR3 - 24W 1.99GHz RF Power LDMOS | NXP | Base Station
MRF7S19080HR3 ✓ نشطمقارنة المواصفات
| المعامل | MRF7S18170HR3 | MRF7S19080HR3 |
|---|---|---|
| العلامة التجارية | NXP Semiconductors | NXP Semiconductors |
| الفئة | MOSFETs | MOSFETs |
| حالة دورة الحياة | نشط | نشط |
| نوع الترانزستور | LDMOS, N-Channel Enhancement-Mode Lateral MOSFET | LDMOS, N-Channel Enhancement-Mode Lateral MOSFET |
| Technology | RF Power Field Effect Transistor | HV7 RF Power LDMOS |
| Configuration | Single, Common Source | Single, Push-Pull |
| Drain-Source Voltage (Vds) Rated | 65 V | — |
| Test Drain Voltage (Vdd) | 28 V | — |
| Test Drain Current (Idq) | 1.4 A | — |
| Output Power (Pout) | 50 W | — |
| Power Gain | 17.5 dB at 1.81 GHz | — |
| Operating Frequency | 1.805 GHz to 1.88 GHz | — |
| العلبة | NI-880H-2L (ceramic, metal-sealed cofired, flange mount) | NI-780H-2L (ceramic, flanged) |
| نوع التركيب | Surface Mount / Flange Mount | Surface Mount / Screw Mount |
| Application Class | Class AB, Class C amplifier | — |
| Target Application | CDMA and multicarrier base station amplifiers | — |
| Lead Free Status | Yes (per datasheet) | Lead Free |
| حالة RoHS | [DATA_NEEDED: RoHS compliance status] | Compliant |
| Frequency Range | — | 1930 MHz to 1990 MHz |
| Test Frequency | — | 1.99 GHz (1987.5 MHz) |
| Drain-Source Voltage (Vdss) Rated | — | 65 V |
| Operating Drain Voltage (VDD) | — | 28 V |
| Quiescent Current (IDQ) | — | 750 mA |
| Output Power (Pout, Avg.) | — | 24 W (W-CDMA) |
| Power Gain (Gp) | — | 18 dB |
| Drain Efficiency | — | 32 % at 24 W Avg. |
| ACPR @ 5 MHz Offset | — | -38 dBc in 3.84 MHz channel |
| Device Output Signal PAR | — | 6.2 dB @ 0.01 % CCDF |