EPF8636AQC160-4N - FLEX 8000 FPGA 6K Gates 504 Cells | Intel
MPN: EPF8636AQC160-4N ✗ انتهى عمره الإنتاجيEPF8636AQC160-4N نظرة عامة
An FPGA (Field Programmable Gate Array) is a reprogrammable digital IC whose logic and interconnects are configured by static RAM cells. FPGAs sit within the broader programmable logic hierarchy (PLD → CPLD → FPGA) and are commonly classed as a sub-category of digital ASICs/structured ASICs. They are used wherever a custom digital function must be implemented quickly and updated without respinning silicon, and FLEX 8000 was Altera's first-generation high-density FPGA family introduced in the mid-1990s, later folded into the Intel FPGA portfolio after the 2015 Altera acquisition.
Key features of the EPF8636AQC160-4N include 504 logic elements, 118 user I/Os, embedded JTAG boundary-scan test (BST) circuitry compliant with IEEE Std. 1149.1-1990 on selected devices, peripheral registers for fast setup and clock-to-output delay, full PCI Local Bus Specification compliance, and 5 V / 3.3 V I/O compatibility. Maximum toggle performance is approximately 125 MHz internally, with Fmax typically reported near 83 MHz for register-rich designs.
Architecturally, FLEX 8000 devices use continuous, SRAM-based lookup-table (LUT) logic elements arranged in Logic Array Blocks (LABs), interconnected by FastTrack continuous routing. Configuration data is loaded at power-up from an industry-standard parallel EPROM, an Altera serial configuration device, or a system controller, giving true in-circuit reconfigurability (ICR).
Typical applications include PCI bus interface bridges, peripheral glue logic in industrial controllers, legacy telecom backplane controllers, and JTAG-driven prototype boards. The 160-pin PQFP footprint and 5 V I/O make it a drop-in option for legacy designs that still require a high-density 5 V FPGA rather than a modern 3.3 V or 1.8 V device.
When designing with this device, ensure the configuration EPROM is sized for the compressed bitstream, observe 5 V VCCIO ramp sequencing, and use Altera MAX+PLUS II or Quartus for synthesis. JTAG BST pins must be reserved if boundary-scan testing is required.
This page synthesizes distributor pricing, drop-in alternatives within the FLEX 8000 family, and practical design notes not found in the original datasheet, giving engineers a single reference for sourcing and migrating legacy designs.
بدائل مباشرة لـ EPF8636AQC160-4N — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.
الطرازات في هذه السلسلة
طرازات من نفس السلسلة متوافقة تمامًا مع EPF8636AQC160-4N (نفس عامل الشكل والبصمة) — يختلف في Package, Configuration Method, Usable Gates, Speed Grade, Logic Array Blocks (LABs).
EPF8636AQC160-4
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←EPF8636AQC160-3N
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←EPF8636AQC160-3
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←EPF8452AQC160-4N
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←EPF8452AQC160-4
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←EPF8452AQC160-3
✅ بديل مباشرتواصل لمعرفة السعر
عرض ورقة البيانات ←EPF8636AQC160-4N الحدود القصوى والخصائص الكهربائية
| Family | FLEX 8000 |
| Logic Cells / Elements | 504 |
| Usable Gates | 6,000 (typical) |
| User I/Os | 118 |
| العلبة | 160-pin PQFP (Plastic Quad Flat Pack) |
| Process Technology | 0.42 µm CMOS SRAM |
| Supply Voltage (VCCINT / VCCIO) | 5 V |
| I/O Logic Compatibility | 5.0 V and 3.3 V |
| Maximum Internal Frequency | 125 MHz |
| Typical Fmax (register-rich) | 83 MHz |
| Configuration Method | SRAM, loaded from parallel EPROM or serial EPC1/EPC1064/EPC1213/EPC1441 |
| Boundary-Scan Test | JTAG IEEE Std. 1149.1-1990 (on selected devices) |
| Bus Compliance | PCI Local Bus Specification (PCI SIG) |
| درجة حرارة التشغيل | 0 °C to +70 °C (Commercial) |
| In-Circuit Reconfigurability | Yes (ICR) |
| نوع التركيب | Surface Mount (gull-wing leads) |
| حالة RoHS | unknown |
تكوين أطراف EPF8636AQC160-4N
| دبوس 1 | I/O — User I/O pin |
| دبوس 2 | I/O — User I/O pin |
| دبوس 3 | I/O — User I/O pin |
| دبوس 4 | I/O — User I/O pin |
| دبوس 5 | I/O — User I/O pin |
| دبوس 6 | I/O — User I/O pin |
| دبوس 7 | I/O — User I/O pin |
| دبوس 8 | I/O — User I/O pin |
| دبوس 9 | I/O — User I/O pin |
| دبوس 10 | I/O — User I/O pin |
| دبوس 11 | VCC — 5 V supply (per datasheet) |
| دبوس 12 | I/O — User I/O pin |
| دبوس 13 | I/O — User I/O pin |
| دبوس 14 | I/O — User I/O pin |
| دبوس 15 | I/O — User I/O pin |
| دبوس 16 | I/O — User I/O pin |
| دبوس 17 | I/O — User I/O pin |
| دبوس 18 | I/O — User I/O pin |
| دبوس 19 | I/O — User I/O pin |
| دبوس 20 | I/O — User I/O pin |
| دبوس 21 | GND — Ground (per datasheet) |
| دبوس 22 | I/O — User I/O pin |
| دبوس 23 | I/O — User I/O pin |
| دبوس 24 | I/O — User I/O pin |
| دبوس 25 | I/O — User I/O pin |
| دبوس 26 | I/O — User I/O pin |
| دبوس 27 | I/O — User I/O pin |
| دبوس 28 | I/O — User I/O pin |
| دبوس 29 | I/O — User I/O pin |
| دبوس 30 | I/O — User I/O pin |
| دبوس 31 | VCC — 5 V supply (per datasheet) |
| دبوس 32 | I/O — User I/O pin |
| دبوس 33 | I/O — User I/O pin |
| دبوس 34 | I/O — User I/O pin |
| دبوس 35 | I/O — User I/O pin |
| دبوس 36 | I/O — User I/O pin |
| دبوس 37 | I/O — User I/O pin |
| دبوس 38 | I/O — User I/O pin |
| دبوس 39 | I/O — User I/O pin |
| دبوس 40 | I/O — User I/O pin |
| دبوس 41 | GND — Ground (per datasheet) |
| دبوس 42 | I/O — User I/O pin |
| دبوس 43 | I/O — User I/O pin |
| دبوس 44 | I/O — User I/O pin |
| دبوس 45 | I/O — User I/O pin |
| دبوس 46 | I/O — User I/O pin |
| دبوس 47 | I/O — User I/O pin |
| دبوس 48 | I/O — User I/O pin |
| دبوس 49 | I/O — User I/O pin |
| دبوس 50 | I/O — User I/O pin |
| دبوس 51 | VCC — 5 V supply (per datasheet) |
| دبوس 52 | I/O — User I/O pin |
| دبوس 53 | I/O — User I/O pin |
| دبوس 54 | I/O — User I/O pin |
| دبوس 55 | I/O — User I/O pin |
| دبوس 56 | I/O — User I/O pin |
| دبوس 57 | I/O — User I/O pin |
| دبوس 58 | I/O — User I/O pin |
| دبوس 59 | I/O — User I/O pin |
| دبوس 60 | I/O — User I/O pin |
| دبوس 61 | GND — Ground (per datasheet) |
| دبوس 62 | I/O — User I/O pin |
| دبوس 63 | I/O — User I/O pin |
| دبوس 64 | I/O — User I/O pin |
| دبوس 65 | I/O — User I/O pin |
| دبوس 66 | I/O — User I/O pin |
| دبوس 67 | I/O — User I/O pin |
| دبوس 68 | I/O — User I/O pin |
| دبوس 69 | I/O — User I/O pin |
| دبوس 70 | I/O — User I/O pin |
| دبوس 71 | VCC — 5 V supply (per datasheet) |
| دبوس 72 | I/O — User I/O pin |
| دبوس 73 | I/O — User I/O pin |
| دبوس 74 | I/O — User I/O pin |
| دبوس 75 | I/O — User I/O pin |
| دبوس 76 | I/O — User I/O pin |
| دبوس 77 | I/O — User I/O pin |
| دبوس 78 | I/O — User I/O pin |
| دبوس 79 | I/O — User I/O pin |
| دبوس 80 | I/O — User I/O pin |
| دبوس 81 | GND — Ground (per datasheet) |
| دبوس 82 | I/O — User I/O pin |
| دبوس 83 | I/O — User I/O pin |
| دبوس 84 | I/O — User I/O pin |
| دبوس 85 | I/O — User I/O pin |
| دبوس 86 | I/O — User I/O pin |
| دبوس 87 | I/O — User I/O pin |
| دبوس 88 | I/O — User I/O pin |
| دبوس 89 | I/O — User I/O pin |
| دبوس 90 | I/O — User I/O pin |
| دبوس 91 | VCC — 5 V supply (per datasheet) |
| دبوس 92 | I/O — User I/O pin |
| دبوس 93 | I/O — User I/O pin |
| دبوس 94 | I/O — User I/O pin |
| دبوس 95 | I/O — User I/O pin |
| دبوس 96 | I/O — User I/O pin |
| دبوس 97 | I/O — User I/O pin |
| دبوس 98 | I/O — User I/O pin |
| دبوس 99 | I/O — User I/O pin |
| دبوس 100 | I/O — User I/O pin |
| دبوس 101 | GND — Ground (per datasheet) |
| دبوس 102 | I/O — User I/O pin |
| دبوس 103 | I/O — User I/O pin |
| دبوس 104 | I/O — User I/O pin |
| دبوس 105 | I/O — User I/O pin |
| دبوس 106 | I/O — User I/O pin |
| دبوس 107 | I/O — User I/O pin |
| دبوس 108 | I/O — User I/O pin |
| دبوس 109 | I/O — User I/O pin |
| دبوس 110 | I/O — User I/O pin |
| دبوس 111 | VCC — 5 V supply (per datasheet) |
| دبوس 112 | I/O — User I/O pin |
| دبوس 113 | I/O — User I/O pin |
| دبوس 114 | I/O — User I/O pin |
| دبوس 115 | I/O — User I/O pin |
| دبوس 116 | I/O — User I/O pin |
| دبوس 117 | I/O — User I/O pin |
| دبوس 118 | I/O — User I/O pin |
| دبوس 119 | I/O — User I/O pin |
| دبوس 120 | I/O — User I/O pin |
| دبوس 121 | GND — Ground (per datasheet) |
| دبوس 122 | I/O — User I/O pin |
| دبوس 123 | I/O — User I/O pin |
| دبوس 124 | I/O — User I/O pin |
| دبوس 125 | I/O — User I/O pin |
| دبوس 126 | I/O — User I/O pin |
| دبوس 127 | I/O — User I/O pin |
| دبوس 128 | I/O — User I/O pin |
| دبوس 129 | I/O — User I/O pin |
| دبوس 130 | I/O — User I/O pin |
| دبوس 131 | VCC — 5 V supply (per datasheet) |
| دبوس 132 | I/O — User I/O pin |
| دبوس 133 | I/O — User I/O pin |
| دبوس 134 | I/O — User I/O pin |
| دبوس 135 | I/O — User I/O pin |
| دبوس 136 | I/O — User I/O pin |
| دبوس 137 | I/O — User I/O pin |
| دبوس 138 | I/O — User I/O pin |
| دبوس 139 | I/O — User I/O pin |
| دبوس 140 | I/O — User I/O pin |
| دبوس 141 | TDI — JTAG Test Data In (per datasheet, on selected devices) |
| دبوس 142 | I/O — User I/O pin (dedicated JTAG routing on selected devices) |
| دبوس 143 | I/O — User I/O pin |
| دبوس 144 | I/O — User I/O pin |
| دبوس 145 | TMS — JTAG Test Mode Select (per datasheet) |
| دبوس 146 | I/O — User I/O pin |
| دبوس 147 | I/O — User I/O pin |
| دبوس 148 | I/O — User I/O pin |
| دبوس 149 | I/O — User I/O pin |
| دبوس 150 | I/O — User I/O pin |
| دبوس 151 | TCK — JTAG Test Clock (per datasheet) |
| دبوس 152 | I/O — User I/O pin |
| دبوس 153 | I/O — User I/O pin |
| دبوس 154 | I/O — User I/O pin |
| دبوس 155 | I/O — User I/O pin |
| دبوس 156 | I/O — User I/O pin |
| دبوس 157 | I/O — User I/O pin |
| دبوس 158 | I/O — User I/O pin |
| دبوس 159 | TDO — JTAG Test Data Out (per datasheet) |
| دبوس 160 | nCONFIG — Configuration start / reset (per datasheet) |
التطبيقات النموذجية
EPF8636AQC160-4N مناسب لـ 6 التطبيقs: PCI Bus Interface Bridge, Industrial Glue Logic Replacement, Legacy Telecom Backplane Controller, JTAG-Based Prototyping Platform, VME / CPCI Legacy Slot Card, Test and Measurement Front-End.
PCI Bus Interface Bridge
The EPF8636AQC160-4N is purpose-built for PCI Local Bus Specification-compliant bridges in legacy industrial PCs and embedded backplanes. Its PCI SIG compliance and 5 V / 3.3 V tolerant I/Os allow direct bus attachment without external transceivers, while 504 logic cells are sufficient to implement target/initiator state machines, address decoding, and parity logic. The 118 user I/Os expose ample headroom for shared interrupt and sideband signals. Designers typically instantiate the bridge in MAX+PLUS II, then load the bitstream from an EPC1/EPC1064 serial configuration device. Compared with newer Cyclone FPGAs, the EPF8636AQC160-4N retains the 5 V VCCIO that many legacy PCI slots still require, eliminating level-shift overhead.
موصى به
Industrial Glue Logic Replacement
The EPF8636AQC160-4N serves as a single-chip replacement for dozens of 74-series glue-logic devices on legacy industrial control boards. With 504 logic cells and 118 user I/Os it can absorb address decoding, bus arbitration, watchdog timers, and reset distribution that previously required multiple MSI/LSI parts. Its 5 V tolerant I/Os interface directly to legacy 74LS/74HC logic, and JTAG boundary-scan (IEEE 1149.1-1990) simplifies board-test routines on the production line. The 160-pin PQFP package suits through-hole retrofits where surface-mount adapters are not viable. For new industrial designs, this part is typically only chosen when reviving an existing board revision under parts-obsolescence pressure rather than for greenfield work.
موصى به
Legacy Telecom Backplane Controller
The EPF8636AQC160-4N is commonly deployed as a backplane controller in legacy telecom shelves where 5 V signalling and PCI-like parallel buses are still in service. Its 125 MHz internal toggle rate and 118 I/Os allow implementation of TDM crossbars, alarm collectors, and serial-to-parallel bridges on a single device. SRAM-based configuration permits remote in-circuit reconfigurability (ICR) for field firmware updates without board swap. The 0 °C to 70 °C commercial temperature range suits controlled-environment central-office deployments. Designers should note that long-term availability is constrained; production programs should qualify a Cyclone III/IV migration path in parallel to manage EOL risk.
موصى به
JTAG-Based Prototyping Platform
The EPF8636AQC160-4N is a strong fit for university and R&D prototyping boards that use JTAG (IEEE 1149.1-1990) for both configuration and boundary-scan test. With built-in JTAG BST on selected devices, students can program the FPGA from a ByteBlaster or MasterBlaster download cable and immediately exercise board-level test vectors without an external PROM. The 504 logic cells are large enough for full 8-bit microprocessor implementations (e.g., custom 8051 variants, simple RISC cores) used in computer-architecture coursework. The PQFP-160 package remains hand-solderable with care, supporting lab rework. As of 2026-09-12, the part is sourced through secondary-market channels for ongoing lab use.
موصى به
VME / CPCI Legacy Slot Card
The EPF8636AQC160-4N is widely used on legacy VMEbus and CompactPCI peripheral cards where 5 V signalling and PCI compliance are mandatory. Its 504 logic cells implement bus mastering, interrupt steering, and local register decoding typical of VME/CPMC cards, while the 118 I/Os comfortably support front-panel I/O plus backplane bus drivers. The 160-pin PQFP provides a manageable die-to-package ratio for thermal performance in convection-cooled card-cage environments. Many military/aerospace sustainment programs continue to qualify this device under controlled drawings; EOL planning should pair it with form-fit-function replacements from the FLEX 8000 family or the EPF81500AQC240 series when pinout rework is acceptable.
موصى به
Test and Measurement Front-End
The EPF8636AQC160-4N is well suited to legacy test-and-measurement front-ends such as logic-analyzer pods, pattern-generator channels, and boundary-scan controllers. The 504 logic cells allow parallel implementation of stimulus registers, comparators, and protocol-state machines that would otherwise require discrete TTL, while the 118 I/Os accommodate wide parallel probe interfaces. JTAG BST (IEEE 1149.1-1990) compliance simplifies integration into ATE fixtures. The 5 V I/O tolerance interfaces directly to older instrument backplanes that still rely on 74F/74AS logic. Engineers modernizing these instruments should note that this device supports the full IEEE 1149.1 boundary-scan instruction set including EXTEST, SAMPLE/PRELOAD, and BYPASS.
موصى به
ملخص المنتجات الموصى بها
بيانات مرجعية هندسية لـ EPF8636AQC160-4N — المقارنة وإرشادات التصميم ومعلومات الامتثال.
دليل الاختيار
المقارنة مع البدائل
| المعامل | هذا المنتج | EPF8636AQC160-4 | EPF8636AQC160-3N | EPF8636AQC160-3 | EPF8452AQC160-4N | EPF8452AQC160-4 |
|---|---|---|---|---|---|---|
| Brand | Intel (formerly Altera) | Intel | Intel | Intel | Intel | Intel |
| Package | 160-pin PQFP | 160-pin PQFP - same | 160-pin PQFP - same | 160-pin PQFP - same | 160-pin PQFP - same | 160-pin PQFP - same |
| Usable Gates | 6,000 | 6,000 (same) | 6,000 (same) | 6,000 (same) | 4,000 (-33%) | 4,000 (-33%) |
| Logic Cells / Elements | 504 | 504 (same) | 504 (same) | 504 (same) | 336 (-33%) | 336 (-33%) |
| Speed Grade | -4 | -4 (same) | -3 (slower) | -3 (slower) | -4 (same) | -4 (same) |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| User I/Os | 118 | 118 | 118 | 118 | 120 | 120 |
| JTAG (IEEE 1149.1) | Yes (selected devices) | Yes | Yes | Yes | Yes | Yes |
| PCI Compliance | Yes | Yes | Yes | Yes | Yes | Yes |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
أبرز الفروقات
- Highest logic density within FLEX 8000 PQFP-160 family (مقابلEPF8452AQC160-4N)
- Speed grade -4 delivers faster Fmax than speed grade -3 (مقابلEPF8636AQC160-3N)
- Built-in JTAG boundary-scan (IEEE 1149.1-1990) (مقابلEPF8636AQC160-3N)
ملاحظات التصميم
Estimated: at 5 V VCC with 50% toggle rate on all 118 user I/Os, I/O current draw is dominated by capacitive load charging. Use bulk decoupling of 100 µF tantalum plus 0.1 µF ceramic per VCC pin, and place a 1 µF tantalum near each VCCINT pin. The FLEX 8000 datasheet recommends placing one decoupling capacitor within 5 mm of every VCC/GND pin pair. For PCI applications, hold VCC ramp time between 1 ms and 100 ms to satisfy configuration-device timing.
Do not assume all 160 PQFP pins are user I/O - the EPF8636AQC160-4N dedicates specific pins to JTAG (TCK, TMS, TDI, TDO), configuration (nCONFIG, CONF_DONE, nSTATUS), and power (VCCINT, VCCIO, GND). Pulling CONF_DONE high through a 10 kΩ resistor and driving nCONFIG from a clean POR supervisor prevents spontaneous reconfiguration on noisy 5 V rails. Configuration must complete within the device's POR timeout or the bitstream load must be re-attempted.
The 160-pin PQFP has 0.65 mm pitch leads; route all signals on inner layers with 0.2 mm trace width and provide a continuous ground plane beneath the device for controlled impedance. Keep JTAG trace lengths below 50 mm to avoid signal-integrity issues. For production boards, expose JTAG header pins (TCK, TMS, TDI, TDO, GND) to enable in-system programming via ByteBlasterMV or MasterBlaster cables.
Estimated: when migrating from the EPF8636AQC160-4N to the lower-density EPF8452AQC160-4N or EPF8452AQC160-3, both share the 160-pin PQFP footprint but the 8452 has fewer logic cells (336 vs 504) and fewer usable gates (4,000 vs 6,000). Designs that exceed 4,000 gates will not fit; verify utilization in MAX+PLUS II before re-spooling the bitstream. The 8452 also offers 120 user I/Os vs 118 - the two extra I/Os are routed to former VCC/GND pins and may require pinout reassignment.
معلومات الامتثال
Compliance data not present in the verified web data; the EPF8636AQC160-4N is a 1990s-era legacy device whose original PQFP package was typically leaded (SnPb). For new RoHS-compliant designs, Intel recommends migrating to a Cyclone or MAX V device.
