ITS428L2ATMA1 vs ITS4140NHUMA1 তুলনা

. বিস্তৃত সাথে-সাথে তুলনা ITS428L2ATMA1 নির্দিষ্ট Infineon ও ITS4140NHUMA1 নির্দিষ্ট Infineon. প্রধান বিশেষত্ব, বৈদ্যুতিক প্রাকৃতিক, প্যাকেজিং, জীবনচক্র অবস্থা, মূল্যাঙ্কন, ও পরিসীমা কোন অপশনটির কেন্দ্রীয় নির্ধারণ করুন

Infineon
ITS428L2ATMA1 ITS428L2ATMA1 - 5.8A Smart High-Side Power Switch | Infineon

ITS428L2ATMA1 - 5.8A Smart High-Side Power Switch | Infineon

ITS428L2ATMA1 ✓ সক্রিয়
Infineon
ITS4140NHUMA1 ITS4140NHUMA1 - 200mA High-Side Smart Switch | Infineon

ITS4140NHUMA1 - 200mA High-Side Smart Switch | Infineon

ITS4140NHUMA1 ✓ সক্রিয়

বিশিষ্টতা তুলনা

পারামিটার ITS428L2ATMA1 ITS4140NHUMA1
ব্র্যান্ড Infineon Infineon
ক্যাটাগরি Power MOSFET Drivers Power MOSFET Drivers
লাইফসাইকেল স্ট্যাটাস সক্রিয় সক্রিয়
Product Type Smart High-Side Power Switch —
Family PROFET Industrial —
আউটপুটের সংখ্যা 1 —
আউটপুট কনফিগারেশন High-Side —
Switch Type N-Channel vertical power MOSFET N-Channel (vertical, integrated)
Continuous Load Current 5.8 A —
Supply Voltage Range 5 V to 24 V DC (load-dump tolerant via external resistor) —
Input Logic Compatibility CMOS, ground-referenced —
On-Resistance (typ) [DATA_NEEDED: RDS(on) at 25 C] —
Diagnostic Feedback Yes (open-load, short, overtemperature) —
Overvoltage / Load-Dump Protection Yes (external resistor required) —
Protection Functions Overload, short-circuit, overvoltage, overtemperature —
অপারেটিং তাপমাত্রা [DATA_NEEDED: operating junction range] —
প্যাকেজ PG-TO252-5-11 (TO-252-5 / DPAK, 4 leads + tab) PG-SOT223-4 (3+Tab)
মাউন্টিং টাইপ Surface Mount Surface Mount
Technology Smart SIPMOS —
RoHS স্ট্যাটাস Compliant Compliant
ফাংশন — High-Side Power Switch / Load Driver
টপোলজি — 1:1 (Input to Output)
Output Current (Continuous) — 200 mA
Supply Voltage Range (Vbb) — 4.9 V to 60 V
Load Dump Withstand — [DATA_NEEDED: load-dump transient rating per ISO 7637]
On-Resistance (RDS(on)) — [DATA_NEEDED: typical RDS(on) in ohms]
Short-Circuit Protection — Yes (current limit + thermal shutdown)
Overload Protection — Yes
Overvoltage Protection — Yes (including load dump)
Inductive Load Clamping — Yes (active negative-voltage clamp at output)
Diagnostic Output — Yes (status/IN pin feedback)
অপারেটিং তাপমাত্রার পরিসর — -40 C to +125 C
MSL লেভেল — 1 (per JEDEC J-STD-020)
Automotive Qualified — [DATA_NEEDED: AEC-Q100 grade]

ডেটাসফেইট ও সম্বল

সমস্ত পণ্যগুলি ব্রাউজ করুন BOM তৈরি করুন রিকোয়েস্ট কোয়ুট