ITS428L2ATMA1 vs ITS4140NHUMA1 Karşılaştırma
Ayrıntılı yan yana karşılaştırma ITS428L2ATMA1 tarafından Infineon ve ITS4140NHUMA1 tarafından InfineonAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | ITS428L2ATMA1 | ITS4140NHUMA1 |
|---|---|---|
| Marka | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Smart High-Side Power Switch | — |
| Family | PROFET Industrial | — |
| Çıkış Sayısı | 1 | — |
| Çıkış Konfigürasyonu | High-Side | — |
| Switch Type | N-Channel vertical power MOSFET | N-Channel (vertical, integrated) |
| Continuous Load Current | 5.8 A | — |
| Supply Voltage Range | 5 V to 24 V DC (load-dump tolerant via external resistor) | — |
| Input Logic Compatibility | CMOS, ground-referenced | — |
| On-Resistance (typ) | [DATA_NEEDED: RDS(on) at 25 C] | — |
| Diagnostic Feedback | Yes (open-load, short, overtemperature) | — |
| Overvoltage / Load-Dump Protection | Yes (external resistor required) | — |
| Protection Functions | Overload, short-circuit, overvoltage, overtemperature | — |
| İşletim Sıcaklığı | [DATA_NEEDED: operating junction range] | — |
| Paket | PG-TO252-5-11 (TO-252-5 / DPAK, 4 leads + tab) | PG-SOT223-4 (3+Tab) |
| Montaj Türü | Surface Mount | Surface Mount |
| Technology | Smart SIPMOS | — |
| RoHS Durumu | Compliant | Compliant |
| Fonksiyon | — | High-Side Power Switch / Load Driver |
| Ağ Yapısı | — | 1:1 (Input to Output) |
| Output Current (Continuous) | — | 200 mA |
| Supply Voltage Range (Vbb) | — | 4.9 V to 60 V |
| Load Dump Withstand | — | [DATA_NEEDED: load-dump transient rating per ISO 7637] |
| On-Resistance (RDS(on)) | — | [DATA_NEEDED: typical RDS(on) in ohms] |
| Short-Circuit Protection | — | Yes (current limit + thermal shutdown) |
| Overload Protection | — | Yes |
| Overvoltage Protection | — | Yes (including load dump) |
| Inductive Load Clamping | — | Yes (active negative-voltage clamp at output) |
| Diagnostic Output | — | Yes (status/IN pin feedback) |
| İşletim Sıcaklığı Aralığı | — | -40 C to +125 C |
| MSL Seviyesi | — | 1 (per JEDEC J-STD-020) |
| Automotive Qualified | — | [DATA_NEEDED: AEC-Q100 grade] |