ITS428L2ATMA1 vs ITS4140NHUMA1 Perbandingan
Perbandingan bersamaan detil ITS428L2ATMA1 dari Infineon dan ITS4140NHUMA1 dari Infineon. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | ITS428L2ATMA1 | ITS4140NHUMA1 |
|---|---|---|
| Merek | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | Smart High-Side Power Switch | — |
| Family | PROFET Industrial | — |
| Jumlah Output | 1 | — |
| Konfigurasi Output | High-Side | — |
| Switch Type | N-Channel vertical power MOSFET | N-Channel (vertical, integrated) |
| Continuous Load Current | 5.8 A | — |
| Supply Voltage Range | 5 V to 24 V DC (load-dump tolerant via external resistor) | — |
| Input Logic Compatibility | CMOS, ground-referenced | — |
| On-Resistance (typ) | [DATA_NEEDED: RDS(on) at 25 C] | — |
| Diagnostic Feedback | Yes (open-load, short, overtemperature) | — |
| Overvoltage / Load-Dump Protection | Yes (external resistor required) | — |
| Protection Functions | Overload, short-circuit, overvoltage, overtemperature | — |
| Suhu Kerja | [DATA_NEEDED: operating junction range] | — |
| Paket | PG-TO252-5-11 (TO-252-5 / DPAK, 4 leads + tab) | PG-SOT223-4 (3+Tab) |
| Tipe Mounting | Surface Mount | Surface Mount |
| Technology | Smart SIPMOS | — |
| Status RoHS | Compliant | Compliant |
| Fungsi | — | High-Side Power Switch / Load Driver |
| Topologi | — | 1:1 (Input to Output) |
| Output Current (Continuous) | — | 200 mA |
| Supply Voltage Range (Vbb) | — | 4.9 V to 60 V |
| Load Dump Withstand | — | [DATA_NEEDED: load-dump transient rating per ISO 7637] |
| On-Resistance (RDS(on)) | — | [DATA_NEEDED: typical RDS(on) in ohms] |
| Short-Circuit Protection | — | Yes (current limit + thermal shutdown) |
| Overload Protection | — | Yes |
| Overvoltage Protection | — | Yes (including load dump) |
| Inductive Load Clamping | — | Yes (active negative-voltage clamp at output) |
| Diagnostic Output | — | Yes (status/IN pin feedback) |
| Rentang Suhu Kerja | — | -40 C to +125 C |
| Level MSL | — | 1 (per JEDEC J-STD-020) |
| Automotive Qualified | — | [DATA_NEEDED: AEC-Q100 grade] |