ITS428L2ATMA1 vs ITS4140NHUMA1 तुलना
विस्तृत दोनों ओर की तुलना ITS428L2ATMA1 द्वारा Infineon और ITS4140NHUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | ITS428L2ATMA1 | ITS4140NHUMA1 |
|---|---|---|
| ब्रांड | Infineon | Infineon |
| श्रेणी | Power MOSFET Drivers | Power MOSFET Drivers |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Smart High-Side Power Switch | — |
| Family | PROFET Industrial | — |
| आउटपुट की संख्या | 1 | — |
| आउटपुट कॉन्फ़िगरेशन | High-Side | — |
| Switch Type | N-Channel vertical power MOSFET | N-Channel (vertical, integrated) |
| Continuous Load Current | 5.8 A | — |
| Supply Voltage Range | 5 V to 24 V DC (load-dump tolerant via external resistor) | — |
| Input Logic Compatibility | CMOS, ground-referenced | — |
| On-Resistance (typ) | [DATA_NEEDED: RDS(on) at 25 C] | — |
| Diagnostic Feedback | Yes (open-load, short, overtemperature) | — |
| Overvoltage / Load-Dump Protection | Yes (external resistor required) | — |
| Protection Functions | Overload, short-circuit, overvoltage, overtemperature | — |
| ऑपरेटिंग तापमान | [DATA_NEEDED: operating junction range] | — |
| पैकेज | PG-TO252-5-11 (TO-252-5 / DPAK, 4 leads + tab) | PG-SOT223-4 (3+Tab) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| Technology | Smart SIPMOS | — |
| RoHS स्थिति | Compliant | Compliant |
| फ़ंक्शन | — | High-Side Power Switch / Load Driver |
| टोपोलॉजी | — | 1:1 (Input to Output) |
| Output Current (Continuous) | — | 200 mA |
| Supply Voltage Range (Vbb) | — | 4.9 V to 60 V |
| Load Dump Withstand | — | [DATA_NEEDED: load-dump transient rating per ISO 7637] |
| On-Resistance (RDS(on)) | — | [DATA_NEEDED: typical RDS(on) in ohms] |
| Short-Circuit Protection | — | Yes (current limit + thermal shutdown) |
| Overload Protection | — | Yes |
| Overvoltage Protection | — | Yes (including load dump) |
| Inductive Load Clamping | — | Yes (active negative-voltage clamp at output) |
| Diagnostic Output | — | Yes (status/IN pin feedback) |
| ऑपरेटिंग तापमान रेंज | — | -40 C to +125 C |
| MSL स्तर | — | 1 (per JEDEC J-STD-020) |
| Automotive Qualified | — | [DATA_NEEDED: AEC-Q100 grade] |