ITS428L2ATMA1 vs ITS4140NHUMA1 Ikinahambing

Detalyadong pagkakahiwalay na pagkakahambing ng ITS428L2ATMA1 sa pamamagitan ng Infineon at ITS4140NHUMA1 sa pamamagitan ng Infineon. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.

Infineon
ITS4140NHUMA1 ITS4140NHUMA1 - 200mA High-Side Smart Switch | Infineon

ITS4140NHUMA1 - 200mA High-Side Smart Switch | Infineon

ITS4140NHUMA1 ✓ Nakahanda

Pagsanggunian na paghahambing

Parametro ITS428L2ATMA1 ITS4140NHUMA1
Brand Infineon Infineon
Kategorya Power MOSFET Drivers Power MOSFET Drivers
Katayuan ng Lifecycle Aktibo Aktibo
Product Type Smart High-Side Power Switch —
Family PROFET Industrial —
Bilang ng Outputs 1 —
Output Kumpigurasyon High-Side —
Switch Type N-Channel vertical power MOSFET N-Channel (vertical, integrated)
Continuous Load Current 5.8 A —
Supply Voltage Range 5 V to 24 V DC (load-dump tolerant via external resistor) —
Input Logic Compatibility CMOS, ground-referenced —
On-Resistance (typ) [DATA_NEEDED: RDS(on) at 25 C] —
Diagnostic Feedback Yes (open-load, short, overtemperature) —
Overvoltage / Load-Dump Protection Yes (external resistor required) —
Protection Functions Overload, short-circuit, overvoltage, overtemperature —
Temperature na Operasyon [DATA_NEEDED: operating junction range] —
Packhaging PG-TO252-5-11 (TO-252-5 / DPAK, 4 leads + tab) PG-SOT223-4 (3+Tab)
Uri ng Pagpapasok Surface Mount Surface Mount
Technology Smart SIPMOS —
Tindminan RoHS Compliant Compliant
Fungsi — High-Side Power Switch / Load Driver
Topolohiya — 1:1 (Input to Output)
Output Current (Continuous) — 200 mA
Supply Voltage Range (Vbb) — 4.9 V to 60 V
Load Dump Withstand — [DATA_NEEDED: load-dump transient rating per ISO 7637]
On-Resistance (RDS(on)) — [DATA_NEEDED: typical RDS(on) in ohms]
Short-Circuit Protection — Yes (current limit + thermal shutdown)
Overload Protection — Yes
Overvoltage Protection — Yes (including load dump)
Inductive Load Clamping — Yes (active negative-voltage clamp at output)
Diagnostic Output — Yes (status/IN pin feedback)
Hanay ng Temperature na Operasyon — -40 C to +125 C
Level ng MSL — 1 (per JEDEC J-STD-020)
Automotive Qualified — [DATA_NEEDED: AEC-Q100 grade]

Mga Datasheets at Resources

Tingnan ang Lahat ng mga Produkto Lumikha ng BOM Hilingin ang Kita