Products (44,000+)

MC7448VU1400ND - 1.4GHz PowerPC G4 MPU | NXP 360-FCCBGA
MC7448VU1400ND

MC7448VU1400ND - 1.4GHz PowerPC G4 MPU | NXP 360-FCCBGA

The NXP MC7448VU1400ND is a 32-bit PowerPC G4 microprocessor (MPC7448 family) running at 1.4 GHz, housed in a 360-ball FCCBGA (25 mm x 25 mm) flip-chip package. It integrates 1 MB of on-chip L2 cache, the AltiVec SIMD engine, and an MPX/60x bus interface, and is fabricated on a 90 nm silicon-on-insulator (SOI) process for high performance at low power. A microprocessor (MPU) is the central execution unit of an embedded computing system, fetching instructions, performing arithmetic and logic operations, and coordinating data flow between memory and peripherals. Within the broader taxonomy, the MPC7448 belongs to the PowerPC processor family -> embedded MPU -> 32-bit microprocessor -> semiconductor IC. The MC7448VU1400ND is part of the Power Architecture ecosystem and is pin-compatible with other MPC7448 variants that share the same 360-FCCBGA package, enabling system designers to scale CPU performance across product lines. Key specifications include a 1.4 GHz core clock, a 200 MHz bus-to-core ratio of 7x, dedicated L1 caches (32 KB instruction and 32 KB data), a unified 1 MB L2 cache with built-in ECC, and the AltiVec 128-bit vector execution unit. The part operates from a 1.15 V core supply with separate 1.5 V / 1.8 V / 2.5 V I/O rails and supports junction temperatures up to 105 °C, making it well-suited for thermally constrained embedded chassis. Architecturally, the MPC7448 is the first high-performance PowerPC processor built on a 90 nm SOI process, which reduces dynamic power versus bulk CMOS while maintaining clock headroom. It implements the Power Architecture instruction set and includes speculative out-of-order execution, a 128-bit memory bus, and on-chip thermal management for adaptive clock throttling. The MC7448VU1400ND variant specifies the higher 1.4 GHz speed grade compared with the 1.267 GHz (1267) and 1.0 GHz (1000) speed bins in the same family. Typical applications include network routers and switches, telecom line cards, high-end printers and imaging equipment, aerospace mission computers, military signal-processing subsystems, and storage controllers that benefit from AltiVec acceleration. The MPX/60x bus permits integration with established PowerPC chip sets, including the MPC107/MPC8641 host bridges. When designing with the MC7448VU1400ND, follow NXP Application Note AN2185 (thermal management) and provide at least four signal layers for the FCCBGA breakout with matched-length impedance for the processor bus. Decouple each voltage rail with bulk and 0.1 µF ceramic capacitors placed within 5 mm of the balls. This page synthesizes distributor stock levels, drop-in pin-compatible alternatives, and design notes not found in a single datasheet view, giving embedded-procurement engineers a faster cross-reference for the MPC7448 family.

RFQ Contact
MC7448VU1600LD - PowerPC G4 MPU 1.6GHz 1MB L2 | NXP Semiconductors
MC7448VU1600LD

MC7448VU1600LD - PowerPC G4 MPU 1.6GHz 1MB L2 | NXP Semiconductors

The NXP MC7448VU1600LD is a 32-bit PowerPC G4 microprocessor from the MPC74xx family, operating at 1.6 GHz with a 1 MB L2 cache, AltiVec SIMD engine, and an MPX/60x processor bus. The device is housed in a 360-pin Flip-Chip Ceramic BGA (FCCBGA) package measuring 25x25 mm and targets high-performance embedded networking and computing systems. A microprocessor (MPU) integrates one or more processor cores, cache hierarchies, memory controllers, and bus interfaces into a single chip. Within the broader system hierarchy, the MPC7448 sits between a microcontroller (MCU) and a full system-on-chip (SoC): an MPU is intended to be paired with external memory and companion chipsets rather than running bare-metal from internal flash. The PowerPC G4 architecture adds AltiVec vector processing units to the standard PowerPC instruction set, enabling SIMD acceleration for signal processing, image manipulation, and encryption workloads. Key features include a 32 KB L1 instruction cache and 32 KB L1 data cache, a unified 1 MB L2 cache, a 200 MHz MPX bus interface with 64-bit data path, and dynamic power management with multiple low-power modes. The device operates from a 1.25 V core supply and a 1.8 V/2.5 V I/O supply across an industrial temperature range up to 105 degrees C, allowing deployment in thermally constrained embedded chassis. The MC7448VU1600LD uses a superscalar, out-of-order execution pipeline built on a deep submicron CMOS process, paired with a 128-bit AltiVec unit that delivers peak vector throughput well above scalar PowerPC cores. Thermal management is handled through the FCCBGA lid, which couples to a heatsink via a thermal interface material. Typical applications include high-end networking line cards, single-board computers, defense and aerospace signal processing, industrial imaging platforms, and legacy PowerPC-based telecommunications equipment. Designers migrating from earlier MPC745x/MPC7447 designs can drop the MC7448VU1600LD onto existing boards with verified socket compatibility. When designing with this part, ensure the MPX bus is correctly terminated and that the 1.25 V core rail is sequenced before the I/O supply. The FCCBGA package requires a controlled-impedance PCB stack-up and an Xilinx/Mentor BSDL file for boundary-scan verification in production. This page synthesizes distributor pricing, same-package alternatives, and practical design notes for the MC7448VU1600LD not found in any single manufacturer datasheet.

RFQ Contact
MC7448VU1700LD - 1.7GHz PowerPC G4 MPU, 1MB L2 | NXP
MC7448VU1700LD

MC7448VU1700LD - 1.7GHz PowerPC G4 MPU, 1MB L2 | NXP

The NXP (formerly Freescale) MC7448VU1700LD is a 32-bit PowerPC G4 microprocessor built on 90 nm silicon-on-insulator (SOI) process technology, operating at 1.7 GHz core clock with a 200 MHz MPX/60x bus, and housed in a 360-ball FCCBGA (25x25 mm) package. It integrates 1 MB of on-chip L2 cache, a 32 KB L1 instruction cache and a 32 KB L1 data cache, plus the AltiVec 128-bit vector/SIMD engine for high-throughput multimedia and DSP-style workloads. According to the NXP MPC7448 product page, the part is qualified for a maximum junction temperature of 105 °C and operates from a 1.3 V core supply with 1.5 V / 1.8 V / 2.5 V I/O rails. What is a PowerPC G4 MPU? A PowerPC G4 microprocessor is a member of the Power Architecture family, a RISC instruction set originally developed by the Apple-IBM-Motorola AIM alliance in the early 1990s. The G4 generation adds the AltiVec vector unit (a SIMD engine similar to Intel SSE) and deeper pipelines, making it suitable for media processing. The MPC7448 sits inside the MPC74xx product line of single-core embedded processors that target networking and computing systems rather than general-purpose desktops. Key features include 1.7 GHz clock frequency, 1 MB on-die L2 cache with eight-way set associativity, hardware-managed MESI coherency for the L1 caches, a 60x/MPX processor bus with support for 200 MHz operation, and a JTAG IEEE 1149.1 boundary-scan test interface. The part uses a 360-ball FCCBGA (Flip-Chip Ceramic BGA) thermal package, which exposes the die through the top of the package for direct heatsink attach and offers the high current capacity required by a GHz-class CPU core. Typical applications include high-performance embedded networking (routers, switches, security appliances), industrial computing controllers, single-board computing platforms that still require Power Architecture support, and legacy Apple/Mac-compatible system upgrades where the MPC7448 is the de-facto upgrade path for older G4-based designs. The AltiVec unit also makes the part attractive for media transcoding and image processing in embedded form factors. When designing with the MC7448VU1700LD, ensure all four voltage rails (1.3 V core, 1.5 V/1.8 V/2.5 V I/O) are sequenced according to the MPC7448 hardware specifications document. A thermal solution capable of removing 10-25 W of power is required at full load, typically a heatsink bonded to the FCCBGA lid with thermal interface material.

RFQ Contact
MC7448VU867ND - PowerPC G4 MPU 867MHz 1MB L2 360-FCCBGA | NXP
MC7448VU867ND

MC7448VU867ND - PowerPC G4 MPU 867MHz 1MB L2 360-FCCBGA | NXP

The NXP Semiconductors MC7448VU867ND is a 32-bit Power Architecture microprocessor (MPU) from the MPC74xx family, operating at 867 MHz core clock speed with 1 MB of on-chip L2 cache, packaged in a 360-pin FCCBGA (Flip-Chip Ceramic BGA) measuring 25 mm x 25 mm. It integrates a single PowerPC G4 core with a 128-bit AltiVec vector execution unit for SIMD multimedia acceleration, and connects to the system via the MPX/60x bus. A Power Architecture MPU (microprocessor unit) is a RISC processor derived from the IBM POWER instruction set, designed for high-performance embedded computing where deterministic throughput and vector math matter. The MPC7448 family sits within the broader taxonomy of embedded CPUs -> 32-bit RISC MPU -> Power Architecture -> MPC74xx series -> MPC7448 sub-family. PowerPC G4 parts such as the MC7448VU867ND were widely used in networking, signal processing, aerospace, and military applications where reliability of the ceramic BGA package and long-term software stability outweighed raw clock speed. Key features include the 128-bit AltiVec execution engine for SIMD-style acceleration of DSP and multimedia workloads, 1 MB of unified L2 cache that reduces external memory traffic, hardware support for out-of-order execution on the AltiVec unit, and the MPX/60x system bus for connection to NXP (and formerly Motorola/Freescale) northbridges and platform ASICs. The device operates from a 1.0 V core supply with 1.5 V / 1.8 V / 2.5 V I/O rails per the datasheet, and the ceramic FCCBGA package is rated for the industrial temperature range to 105 degrees C. Typical applications include leading-edge pervasive and embedded computing platforms, embedded network control and routing line cards, signal-processing acceleration cards, defense and aerospace SBCs (single-board computers), and legacy PowerPC-based VME/cPCI compute nodes. The AltiVec engine is especially attractive for applications such as software-defined radio baseband, image processing, and network packet inspection. When designing with this device, pay close attention to the multi-rail power sequencing (1.0 V core before 1.5/1.8/2.5 V I/O) and to the thermal envelope of the ceramic BGA - the HCTE ceramic lid enables conduction cooling but still requires a heatsink or cold plate at sustained loads. Pin replacement requires an exact 360-FCCBGA land pattern and BIOS/firmware validation, since the MPC7448 is a host processor, not a peripheral. This page synthesizes current distributor pricing, parametric context, lifecycle status, and a structured alternative-part analysis not aggregated in any single manufacturer or distributor document.

RFQ Contact
MC7457RX1000NC - PowerPC G4 MPU 1.0GHz 483-FCCBGA | NXP Semiconductors
MC7457RX1000NC

MC7457RX1000NC - PowerPC G4 MPU 1.0GHz 483-FCCBGA | NXP Semiconductors

The NXP Semiconductors (formerly Freescale/Motorola) MC7457RX1000NC is a high-performance PowerPC G4 microprocessor (MPC7457) built on a 0.13 μm process and housed in a 483-ball FCCBGA (29x29 mm) ceramic package. The part integrates a single 32-bit PowerPC core with a 64-bit data bus, runs at a 1.0 GHz core frequency, and includes a full 128-bit AltiVec SIMD engine for vector processing. Core power is supplied at approximately 1.3 V, with peripheral supplies in the 1.5 V/1.8 V/2.5 V range. A microprocessor (MPU) is a single-chip CPU that fetches, decodes, and executes instructions; the PowerPC G4 is an implementation of the PowerPC instruction set architecture (ISA) widely used in embedded computing, networking, aerospace, and defense. Within the hierarchy MPU -> microprocessor -> processor -> integrated circuit, the MPC7457 occupies the high-performance tier, with deep pipelines, out-of-order execution, dedicated L1 I-cache and D-cache, and an integrated L2 cache controller. The FCCBGA (flip-chip ceramic BGA) package provides robust thermal performance and is qualified for high-reliability military and industrial applications. Key specifications include a 1.0 GHz clock frequency, a 167 MHz external bus, a 64-bit data path, single-core 32-bit architecture with 128-bit AltiVec unit, and operating temperature support up to 105 °C. Compared to its predecessor MPC7455, the MPC7457 is footprint-compatible when the core is operated at 1.3 V, and according to NXP, it offers substantially higher throughput per watt than earlier PowerPC parts. Typical applications include embedded networking equipment (routers, switches, base stations), military and aerospace electronics, industrial control systems, high-performance storage controllers, and legacy PowerPC-based single-board computers. The 483-FCCBGA package and 1.3 V core supply simplify board design relative to older PowerPC parts that required multiple voltage rails. When designing with the MC7457RX1000NC, ensure the board follows NXP's reference design for the MPC7457; the part dissipates significant power at 1 GHz, so a thermal management strategy combining the ceramic BGA's thermal pad with board-level copper is essential. The part is mature and is typically sourced from authorized distributors or licensed aftermarket suppliers. This page synthesizes distributor pricing, drop-in alternatives from the MPC74xx family, and practical design notes not found in the manufacturer's short-form marketing summary.

RFQ Contact
MC7457VG1000LC - MPC7457 1.0GHz PowerPC G4 MPU, 483-FCCBGA | NXP
MC7457VG1000LC

MC7457VG1000LC - MPC7457 1.0GHz PowerPC G4 MPU, 483-FCCBGA | NXP

The NXP MC7457VG1000LC is a PowerPC G4 host microprocessor (MPC74xx family) delivering 1.0 GHz clock speed in a 483-ball Flip-Chip Ceramic BGA (FCCBGA) measuring 29x29 mm, with a 1.3 V core voltage and 105 C maximum operating temperature (APOLLO 7 RV1.2 silicon revision). A microprocessor (MPU) is the central execution unit of an embedded computing system. The MPC74xx family implements the 32-bit PowerPC RISC architecture, fitting within the broader taxonomy of microprocessors -> RISC processors -> embedded host processors -> integrated circuits (semiconductors). These high-performance host processors are typically deployed in networking, storage, and embedded computing platforms where deterministic throughput and AltiVec SIMD acceleration are valued. Key features include a 32-bit PowerPC core with full 128-bit AltiVec vector/SIMD execution unit, on-chip L1 cache and dedicated L2 cache, a high-bandwidth processor local bus (MPX/60x bus), and integrated thermal management/die temperature sensing. The 483-FCCBGA flip-chip ceramic package provides the electrical and thermal performance headroom required at gigahertz clock rates and is socket-compatible with prior MPC7457 revisions in the family. The MPC7457 architecture combines a 7-stage integer pipeline with a dedicated vector issue queue, supporting out-of-order execution of up to 16 in-flight instructions. The integrated L2 cache controller supports backside cache configurations, while the 60x/MPX system bus enables symmetric multiprocessing (SMP) up to two processors for higher-end designs. Typical applications include high-performance networking line cards, RAID storage controllers, aerospace/defense embedded compute, and legacy industrial computing platforms where the PowerPC/AltiVec ecosystem is preferred over ARM or x86 alternatives. Designers choosing this part typically retain existing PowerPC firmware and toolchains. When designing with this part, ensure the PCB land pattern matches the 483-ball FCCBGA footprint (29x29 mm) and provide adequate thermal relief via thermal vias under the die. Pair with companion MPC107/MPC1073 northbridge-style bridge devices for full platform designs. This page synthesizes distributor pricing, drop-in alternatives from the MPC74xx family, and practical design notes for the MC7457VG1000LC that are not consolidated on any single manufacturer page.

RFQ Contact
MC7457VG1267LC - 1.267GHz PowerPC G4 MPU | 483-FCCBGA | NXP
MC7457VG1267LC

MC7457VG1267LC - 1.267GHz PowerPC G4 MPU | 483-FCCBGA | NXP

The NXP MC7457VG1267LC is a PowerPC G4 microprocessor from the MPC74xx family, integrating a single 32-bit core running at 1.267 GHz with the AltiVec 128-bit SIMD engine, housed in a 483-ball Flip-Chip Ceramic BGA (FCCBGA) package measuring 29x29 mm. This APOLLO 7 RV1.2 silicon revision targets embedded high-performance computing with a 1.3 V core supply and an extended operating temperature rating up to 105 °C. A microprocessor (MPU) is the central processing unit of an embedded computing system, executing instructions fetched from memory and orchestrating data movement between peripherals. The PowerPC G4 belongs to a RISC architecture lineage in which the MPC74xx family is positioned for high-end embedded and signal-processing workloads, sitting hierarchically between general-purpose CPUs and DSP (digital signal processor) devices. Within NXP's portfolio, the MPC74xx series complements the MPC86xx 32-bit line and bridges toward the 64-bit PowerPC families used in networking and aerospace. Key features include 32 KB L1 instruction and data caches, an integrated L2 cache controller, the AltiVec vector engine for SIMD acceleration, and a 128-bit-wide processor bus. The device also integrates memory management, on-chip debug, and a multiprocessor bus interface that supports coherent shared-memory designs. Compared with prior Apollo revisions, the RV1.2 stepping improves leakage characteristics for the 1.267 GHz speed grade. From an architectural standpoint, the MC7457VG1267LC uses a deeply pipelined, out-of-order superscalar core with seven execution units. Its AltiVec engine adds 128-bit vector operations that accelerate DSP, imaging, and cryptography kernels, while the bus interface supports front-side bus frequencies compatible with MPC107/MPC107A northbridges for legacy PowerPC platforms. Typical applications include industrial imaging and vision systems, military and aerospace signal processing, high-end print and image rendering engines, and telecommunications line cards where SIMD throughput and 32-bit PowerPC software ecosystems coexist. The 105 °C junction rating and ceramic BGA package also support ruggedized and long-lifecycle defense programs. Designers should ensure the 1.3 V core rail uses a multi-phase VRM with adequate bulk decoupling and that the 483-ball FCCBGA land pattern follows NXP's recommended PCB escape, including microvia stacks to bring signals out of the array. This page consolidates distributor pricing, drop-in alternatives, and application notes not aggregated in the manufacturer datasheet, supporting rapid sourcing and BOM decisions for long-lifecycle embedded designs.

RFQ Contact
MC74ACT32DR2G - 5V Quad 2-Input OR Gate, SOIC-14 | onsemi
MC74ACT32DR2G

MC74ACT32DR2G - 5V Quad 2-Input OR Gate, SOIC-14 | onsemi

The onsemi MC74ACT32DR2G is a quad 2-input OR gate from the ACT (Advanced CMOS TTL-compatible) logic family, supplied in a 14-pin SOIC surface-mount package on tape and reel. The device contains four independent 2-input OR gates in a single silicon die, operates from a single 4.5V to 5.5V VCC supply, and is rated for a maximum propagation delay of approximately 9 ns at 5V with a 50 pF load. An OR gate is a fundamental combinational logic primitive whose output is the logical disjunction of its two inputs: the output goes HIGH whenever at least one input is HIGH. The MC74ACT32DR2G belongs to the ACT subfamily, which provides TTL-compatible input voltage thresholds while retaining CMOS output drive capability. In the broader taxonomy, this part sits under: logic gate -> combinational logic -> standard logic -> digital IC -> semiconductor. The ACT family was specifically developed to ease migration from legacy 74LS/74F TTL designs to CMOS, providing the lower quiescent current of CMOS with input levels that directly interface to 5V TTL outputs. Key specifications include four channels per package, two inputs per channel, one output per channel, 24 mA source/sink output drive capability, and a propagation delay of 9 ns at 5V VCC. The device features TTL-compatible input thresholds (VIH = 2.0 V min, VIL = 0.8 V max), rail-to-rail output swing to VCC and ground, and ESD protection on all pins. Power dissipation is reduced by approximately 50% compared to the equivalent bipolar 74LS32, while drive strength is retained. Architecturally, the ACT32 uses CMOS transistors for both the input stage (TTL-compatible threshold via adjusted NMOS/PMOS ratios) and the output stage (symmetric push-pull drivers capable of 24 mA sink/source). This makes the part suitable for driving moderate capacitive loads, bus interfaces within a backplane, and LED indicators. The four gates share VCC and GND pins (pins 14 and 7 respectively), with each gate using two dedicated input pins and one output pin. Typical applications include address decoding in 5V memory-mapped systems, glue logic between microcontrollers and peripherals, bus arbitration logic, control signal combining in industrial PLC interfaces, and general-purpose logic replacement in legacy TTL designs. The wide operating temperature range of -40C to +85C supports both commercial and industrial environments, while the SOIC-14 package is suitable for hand-soldered prototypes and high-volume SMT assembly lines. When designing with the MC74ACT32DR2G, observe standard high-speed CMOS design practice: place a 0.1 uF decoupling capacitor as close as possible to the VCC pin (pin 14), keep input traces short to minimize noise-induced threshold violations, and avoid driving inputs above VCC. Unused inputs must be tied to VCC or GND - never left floating - to prevent unwanted shoot-through current in the input stage that can increase ICC. The ACT32 is a 5V-only part and will not operate correctly at 3.3V; for 3.3V applications use the 74LVC32 family instead. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet, with explicit cross-brand references to TI, Toshiba, and Fairchild equivalents that share the same SOIC-14 footprint.

RFQ Contact
MC74F169D - 4-Bit Synchronous Binary Counter | onsemi
MC74F169D

MC74F169D - 4-Bit Synchronous Binary Counter | onsemi

onsemi MC74F169D is a 4-bit synchronous counter IC offered in a 16-pin SOIC package. The device is described as a binary counter with positive-edge clock operation and belongs to the logic-counter and divider category. Its four counter stages provide modulo-16 binary counting when operated in the count-up configuration, making it suitable for digital state sequencing, frequency division, timing generation, and control logic. A synchronous counter is a logic IC whose internal counting stages update on the active clock edge. Compared with an asynchronous ripple counter, a synchronous design simplifies the relationship between clock and output transitions because the counter stages are driven together. The MC74F169D is based on the Fast Schottky TTL MC54/74F168 and MC54/74F169 family, whose documented operating characteristics are suited to high-speed digital systems. The primary functional characteristics visible for MC74F169D include a 4-bit counter, positive-edge triggering, binary counting behavior, and a 16-SO package. The package suffix D identifies the lead configuration used in the ordering information. Exact propagation-delay, operating-voltage, current, and environmental limits should be taken from the manufacturer datasheet before release, rather than inferred from distributor catalog descriptions. MC74F169D can be used in digital control systems where a compact modulo-16 counter is needed. Typical uses include sequencing multiple operating phases, dividing an incoming clock into slower timing intervals, generating repeatable four-bit state values, and advancing a small state machine. Positive-edge triggering allows the count to change on a selected rising transition instead of every transition of the input clock. Circuit design should account for the unused control functions and asynchronous preset or clear inputs described by the manufacturer. The count outputs should be treated as ordinary CMOS or TTL-compatible logic signals within the device's specified voltage and fanout limits. A clean clock connection, adequate trace routing, and controlled grounding help preserve reliable operation at the switching rates intended for the Fast Schottky TTL family. For new and legacy counter designs, MC74F169D offers a focused four-stage counting solution in a standard 16-pin SOIC footprint. This page combines the confirmed catalog specifications, package information, sourcing guidance, and practical considerations needed to evaluate the MC74F169D against other 4-bit synchronous counter implementations.

RFQ Contact
MC74F169M - 4-Stage Synchronous Counter | onsemi
MC74F169M

MC74F169M - 4-Stage Synchronous Counter | onsemi

The onsemi MC74F169M is a 4-stage synchronous bidirectional counter designed for counting and sequencing applications that require a stable, multi-bit count output. It provides a 4-bit counting section with modulo-16 up-count and down-count operation, making it useful for digital control, timing, and address-generation systems. The MC74F169M is associated with the onsemi MC74F169 logic family and is supplied in a 16-pin small-outline package indicated by the M suffix. A synchronous counter is a digital logic device whose internal flip-flops change state on the same active clock edge. Unlike an asynchronous ripple counter, a synchronous counter updates all counting stages together, reducing propagation-delay variation between output bits. The MC74F169M also supports synchronous loading and counting in either direction, providing flexible control for repeatable state transitions. The principal functional characteristics include four counting stages, a 4-bit counter architecture, positive-edge counting, bidirectional operation, and a modulo-16 count sequence. These characteristics allow the output word to advance from 0 through 15 in the selected direction. The device is suitable for digital frequency division, event counting, programmable sequencing, industrial timing, and control-logic applications where a compact counter is preferable to a programmable logic implementation. The synchronous architecture keeps the counter stages aligned during each count transition, which helps maintain predictable outputs in multi-bit buses. The MC74F169M can therefore be used as a compact state counter, a modulo-16 sequencing element, or a building block for larger counters when additional cascaded stages are required. Cascading requires attention to count enable, carry, reset, and clock-edge relationships so that the combined counter advances only when intended. Typical implementations include industrial control and automation equipment, electronic timers, test and measurement systems, digital instrumentation, and general-purpose logic designs. In a timer, the counter can divide an input clock into a lower-frequency update rate. In a sequencing circuit, it can advance through up to 16 states. In an event-counting system, it can retain a modulo-16 tally while external logic handles overflow interpretation. When laying out the design, use the manufacturer pin-description table for the exact MC74F169M package and verify the meanings of the parallel-load, count-enable, clear, clock, and output signals. Keep clock and control traces short, provide a low-impedance ground reference, and isolate sensitive analog circuitry from digital switching nodes. Because counter outputs change on clock edges, include adequate timing margin for downstream combinational logic and synchronize asynchronous control inputs when they originate outside the local clock domain. This page organizes the MC74F169M function, package information, comparison dimensions, sourcing workflow, and engineering guidance into one practical reference. It also distinguishes confirmed product attributes from details that require review in the manufacturer datasheet, helping designers move from identification to schematic validation with fewer packaging or timing mistakes.

RFQ Contact
MC74F169N - 4-Bit Binary Up/Down Counter | onsemi
MC74F169N

MC74F169N - 4-Bit Binary Up/Down Counter | onsemi

The onsemi MC74F169N is a 4-bit synchronous binary up/down counter in a 16-pin PDIP package. It operates from a 4.5 V to 5.5 V supply, counts on the positive edge of the clock, and provides a maximum operating frequency of 100 MHz. The device includes separate load, master-reset, count-direction, carry, and four parallel data inputs, making it useful for frequency division, state sequencing, digital timing, and control-system counting applications. A counter is a sequential digital circuit that stores a binary number and changes that number when a clock edge arrives. An up/down counter can increment or decrement its state according to a direction control input, while a parallel-load input allows the counter to start from a preset value. The MC74F169N belongs to the F-series 74-family logic category, combining TTL-compatible signal conventions with high-speed operation. Key features include 4-bit counting capacity, a 4.5 V to 5.5 V operating supply range, positive-edge clock triggering, a 100 MHz maximum frequency rating, and a carry output that indicates overflow or underflow of the counting range. The through-hole PDIP-16 package is suitable for legacy industrial, test, instrumentation, and educational designs where a surface-mount footprint is not required. The counter supports parallel loading of the four data inputs and provides a master-reset function for initialization. The direction input selects counting up or counting down, while the carry output can be monitored by a system controller or cascaded into another counter stage. Because the device is a high-speed logic part, power distribution and signal-integrity practices remain important when driving long PCB traces or connecting external clock sources. Typical applications include digital frequency dividers, programmable sequence counters, pulse-counting interfaces, timing generators, and general-purpose logic in industrial control systems. The 16-pin PDIP package also makes the MC74F169N suitable for prototyping and repair applications where a socketed through-hole component is preferred. When laying out the circuit, place the clock and control traces away from noisy switching nodes and provide a clean, decoupled supply at the VCC pin. Confirm the polarity and timing requirements of the load, reset, and direction inputs in the manufacturer datasheet before cascading counters or driving external control logic. This page provides a structured comparison of the MC74F169N with available catalog references, practical design notes, application guidance, and the technical attributes needed for initial design-in and sourcing review.

RFQ Contact
MC74F243M - Quad Bus Transceiver, 3-State | onsemi | SOIC-14
MC74F243M

MC74F243M - Quad Bus Transceiver, 3-State | onsemi | SOIC-14

The onsemi MC74F243M is a quad bus transceiver with 3-STATE outputs in a 14-pin small-outline integrated circuit (SOIC-14) surface-mount package. It belongs to the 74F (FAST Schottky TTL) logic family, which provides significantly faster propagation delays than standard 74LS TTL while remaining compatible with TTL voltage levels. A bus transceiver is an interface IC that allows bidirectional data transfer between two buses or between a bus and a processor. In the logic IC hierarchy, the 74F243 is a specialized interface device - part of the broader 7400-series transistor-transistor logic (TTL) family - combining four driver circuits and four receiver circuits arranged in the same physical package so that data can flow from the A bus to the B bus or from the B bus to the A bus under the control of separate enable inputs. Key features of the MC74F243 include four independent bus transceiver channels, 3-STATE outputs that effectively disconnect the device from the bus when disabled, and separate direction control (GAB and GBA type enables) for each transfer direction. The FAST Schottky TTL process delivers the fast edge rates expected of the 74F family, making the device suitable for backplane and inter-board data paths that outgrow slower 74LS-class transceivers. Architecturally, each transceiver cell contains a driver with a 3-STATE output stage and a receiver path whose active state is selected by the enable pins. When an enable input is inactive, the corresponding outputs assume the high-impedance state, allowing multiple transceivers to share a common bus without bus contention. Typical applications include bidirectional CPU memory-bus buffering, backplane data transceivers in industrial control systems, general-purpose 4-bit bus isolation, and legacy system maintenance where original TTL bus transceivers must be sourced for repair. A key design consideration is that FAST TTL devices consume more power than CMOS alternatives; verify the drive and thermal requirements of your bus before selecting 74F over 74LS or 74HC parts. This page consolidates sourcing availability, packaging details, and practical design notes for the MC74F243M in one place, complementing the manufacturer datasheet with drop-in replacement guidance not found on distributor pages.

RFQ Contact
MC74F283N - 4-Bit Fast-Carry Full Adder | onsemi
MC74F283N

MC74F283N - 4-Bit Fast-Carry Full Adder | onsemi

The onsemi MC74F283N is a 4-bit binary full-adder integrated circuit with fast carry, designed for arithmetic logic and digital counter applications. The device operates from a 5.5 V supply and is packaged in a 16-pin DIP. Its four parallel operand inputs, sum outputs, and carry inputs and outputs support conventional binary addition and subtraction when paired with appropriate logic inversion. A full adder is a combinational digital-logic building block that adds two binary operands and an incoming carry bit, producing one sum bit and one carry-out bit. Four full-adder stages combined in one IC provide a practical 4-bit adder subsystem. The MC74F283N belongs to the MC74F logic family and is positioned as a high-speed logic function for applications requiring more propagation performance than older LS-series devices. The MC74F283N provides four independently addressed sum outputs, four operand inputs for each addition stage, and carry connections that can be cascaded with additional adder packages. Fast carry reduces the delay between adjacent bit stages, which is important in synchronous counters, arithmetic units, address-generation logic, test equipment, and control systems where timing margin is limited. The 16-DIP package supports conventional through-hole PCB assembly and prototyping. Because the device exposes its arithmetic signals directly, system designers must account for signal fan-out, input transition times, unused inputs, and propagation delay when constructing clocked or cascaded arithmetic networks. The 5.5 V supply requirement is a key selection criterion for systems designed around classic TTL-compatible logic families. Typical uses include binary counters, digital accumulators, frequency-division and sequencing circuits, arithmetic control units, instrumentation, industrial automation, and educational logic systems. A multi-package implementation can extend the adder width beyond four bits by connecting the carry output of one MC74F283N to the carry input of the next package. For a new design, verify the complete pin assignment, propagation-delay limits, supply-current behavior, and input requirements in the manufacturer datasheet before finalizing PCB routing or system timing. The DIP footprint also makes this device particularly convenient where component insertion, inspection, repair, or manual prototyping is preferred over compact surface-mount assembly.

RFQ Contact
MC74F538N - 1-of-8 Decoder, 3-State Outputs | onsemi | DIP-20
MC74F538N

MC74F538N - 1-of-8 Decoder, 3-State Outputs | onsemi | DIP-20

The onsemi MC74F538N is a 1-of-8 decoder/demultiplexer with 3-state outputs in a 20-pin plastic dual in-line package (PDIP-20, suffix N). It accepts three address inputs (A0-A2) and decodes them to activate exactly one of eight mutually exclusive outputs, with a polarity control input (P) that selects whether outputs are active LOW or active HIGH. A decoder/demultiplexer is a combinational logic device that converts a binary-coded input into a one-hot output selection, forming part of the broader logic IC hierarchy: decoder -> combinational logic -> SSI/MSI logic -> digital semiconductors. Decoders are fundamental building blocks for memory address decoding, peripheral chip-select generation, and data routing in digital systems. Key features of the MC74F538N include the three-state (3-STATE) outputs that allow multiple devices to share a common bus, the polarity control input that lets a single design serve both active-LOW and active-HIGH chip-select schemes, and the F/FAST (Fairchild Advanced Schottky TTL) process family that delivers significantly faster propagation delays than standard 74-series TTL logic. Architecturally, the device belongs to the FAST series of Schottky-clamped TTL circuits, which use an advanced oxide-isolated process to reduce propagation delay and increase toggle speeds while retaining TTL-compatible input thresholds. The 3-state output structure places each output in a high-impedance state when the output control is disabled, so the MC74F538N can be paralleled with other bus drivers without contention. Typical applications include memory address decoding in embedded controllers, chip-select generation for peripheral ICs, data routing and bus switching in industrial control equipment, and line decoding in legacy telecommunications and instrumentation platforms that use 5V TTL logic levels. When designing with this part, keep unused address inputs tied to defined logic levels and ensure the 3-state output control is asserted correctly during bus arbitration to avoid bus contention. Decoupling capacitors of 0.1uF per supply pin are recommended for FAST-series logic, which can draw significant transient supply current during output transitions. This page adds unique value beyond the manufacturer datasheet by combining distributor sourcing information, drop-in alternative analysis, practical design notes, and lifecycle guidance in a single reference.

RFQ Contact
MC74F569N - 4-Bit Bidirectional Counter | onsemi | Logic
MC74F569N

MC74F569N - 4-Bit Bidirectional Counter | onsemi | Logic

The onsemi MC74F569N is a 4-bit bidirectional counter with 3-state outputs, packaged for logic-counter applications that require reversible counting and tri-state bus control. The device provides a 4-bit counting element, supports counting in both directions, and places its outputs in a high-impedance state when the output-enable function is inactive. This combination makes it useful for programmable event counters, digital timing systems, address-generation logic, and control systems that need to share a bus. A bidirectional counter is a synchronous digital sequential circuit that counts either upward or downward from a loaded preset value. Unlike a simple unidirectional ripple counter, this type of counter can track positive and negative counting sequences from the same logic state. The 3-state output architecture belongs to the broader bus-interface hierarchy: logic IC > counter > binary counter > bus-compatible digital component. Tri-state outputs permit multiple devices to share a common data bus without creating contention when a device is disabled. The MC74F569N is identified as a counter IC with a 4-bit element. Its principal functional characteristics include bidirectional counting, preset capability for programmable operation, and carry-look-ahead functions intended to simplify cascading, as described for the related 74F569 family. Three-state outputs add bus-interface flexibility, allowing an external controller to select which counter drives the shared data path. These characteristics are more important for system timing and control than the numeric operating frequency alone. The 74F569 family architecture is based on edge-triggered logic behavior intended for synchronous counter operation. A synchronous design allows the counter state to advance in response to a common clock edge, simplifying multi-stage count chains because the stages do not rely on ripple propagation. Preset inputs establish an initial count, while direction control determines whether subsequent clock edges increment or decrement that count. Carry logic provides a way to detect and extend counting ranges beyond four bits. Typical uses include digital chronometers, industrial sequence controllers, frequency-divider and event-counting circuits, programmable timing modules, and address-generation blocks. In each case, the counter can be loaded with a starting value, advanced or reversed under direction control, and connected to shared bus lines through its 3-state outputs. Care is required when multiple counters share a bus because exactly one enabled device should drive the bus at any given time. For PCB implementation, use the manufacturer pin-description table to assign every signal and preserve the original package footprint, power connections, and decoupling arrangement. A common 0.1 uF ceramic bypass capacitor should be placed close to the power and ground pins when the device is used in conventional digital logic designs. Clock, count-enable, preset, and direction traces should be kept away from output and bus traces where switching activity could cause unintended transitions. This product record combines the MC74F569N identity, 4-bit bidirectional-counter function, 3-state-output feature, sourcing links, package constraints, and replacement guidance into a design-oriented reference. Because complete electrical ratings and pin assignments are not reproduced in the manufacturer document excerpts, use the MC74F569N datasheet for final logic-level, timing, package, and footprint decisions before placing an order.

RFQ Contact
MC74F85M - 4-Bit Magnitude Comparator | onsemi
MC74F85M

MC74F85M - 4-Bit Magnitude Comparator | onsemi

onsemi MC74F85M is a 4-bit magnitude comparator that compares two four-bit binary, BCD, or other monotonic code words and indicates whether the first operand is greater than, equal to, or less than the second. The device belongs to the Fast Schottky TTL logic family and is associated with the MC74F85 4-bit magnitude comparator function. Its three active outputs provide the fundamental comparison results required by digital control, sorting, arbitration, and addressing circuits. A magnitude comparator is a combinational logic IC that evaluates the numerical relationship between two unsigned multibit operands. The MC74F85M sits within the hierarchy of digital comparator, combinational logic, logic IC, and integrated circuit categories. By presenting greater-than, equal-to, and less-than results in parallel, it reduces the number of gates, latches, and software operations otherwise needed to determine the relationship between two values. The principal feature is expansion capability: the 74F85 function can be extended to almost any operand length. Its inputs accept binary, BCD, or other monotonic code relationships, while the output structure identifies three possible magnitude states. High-impedance NPN base inputs are listed as a feature of the related 74F85 family, supporting practical interfacing in TTL systems. These characteristics make the comparator useful where multi-level ordering decisions must be resolved quickly and deterministically. Operationally, the three outputs support comparator cascading. When multiple four-bit sections are used, the upper section can use the lower section's result as an additional comparison input, allowing an eight-bit, twelve-bit, or wider magnitude decision. This architecture is faster and less complex than building a complete comparator from individual gate networks. The associated 74F85 description specifically identifies expansion to almost any length as a core capability. Typical applications include binary and BCD value comparison, conditional branch generation, address and priority arbitration, sequence controllers, sorting networks, and industrial logic systems. The comparator can also support retrofits of legacy TTL boards because the MC74F85 function is associated with the established Fast Schottky TTL family and commonly documented under the 74F85 designation. Designers should confirm the exact package, pin assignment, supply voltage, input levels, output timing, and propagation-delay limits for the MC74F85M before PCB release. Cascaded designs must allocate the additional comparison inputs correctly and route output states without creating contention. Because legacy logic may use different TTL families, input and output compatibility should be checked against the actual system levels rather than inferred from the comparator function alone. This product overview synthesizes the verified function, expansion behavior, package uncertainty, sourcing status, and practical implementation considerations for engineers comparing the MC74F85M with other 74F85-compatible implementations. It also identifies the electrical details that must be checked in the manufacturer datasheet before qualification or layout approval.

RFQ Contact
MC74HC1G14DFT1G - Single Schmitt-Trigger CMOS Inverter | onsemi
MC74HC1G14DFT1G

MC74HC1G14DFT1G - Single Schmitt-Trigger CMOS Inverter | onsemi

The onsemi MC74HC1G14DFT1G is a single-channel high-speed CMOS inverter with a Schmitt-trigger input, supplied in the compact 5-pin SC-88A SC-70-5/SOT-353 package. Verified distributor information identifies a 2 V to 6 V single CMOS Schmitt-input device with five pins and a specified operating-temperature range of -55°C to 125°C. Its Schmitt-trigger input provides separate switching thresholds for rising and falling edges, improving noise immunity when the input crosses slowly or contains ripple. A logic inverter is a combinational digital component that produces the complement of its input: a low input produces a high output, while a high input produces a low output. Adding Schmitt-trigger hysteresis creates a more robust threshold detector than an ordinary inverter. Within the device hierarchy, this part belongs to the CMOS logic family and the 74HC high-speed CMOS series, combining low static power with practical noise-tolerant operation. The verified listing describes the MC74HC1G14 as a high-speed CMOS inverter fabricated using silicon-gate CMOS technology. Its internal multistage construction includes a buffered output intended to provide high noise immunity and a stable output. The onsemi documentation also notes that MC74HC1G14 output drive current is one-half that of the broader MC74HC series, making load capability and external pull-up selection important design considerations. Typical uses include slow-edge signal conditioning, debouncing, pulse shaping, transistor or relay-interface inversion, and industrial digital control where a noisy or slowly changing input could otherwise cause repeated switching. The device is also appropriate for compact embedded designs requiring a rail-to-rail CMOS inverter within a 2 V to 6 V supply range. Designers should verify absolute maximum ratings, propagation timing, output-drive current, and unused-pin requirements in the manufacturer datasheet. Because the verified data does not provide complete pin-level information, pricing, or sufficient evidence for five drop-in equivalents, this page avoids fabricating those values and marks unavailable specifications explicitly. This page combines verified manufacturer and distributor information with a transparent engineering assessment. It distinguishes confirmed device characteristics from data still requiring datasheet confirmation and avoids presenting comparator results as guaranteed drop-in replacements without complete electrical and pinout validation.

RFQ Contact
MC74VHC1G14DFT1G - Single Schmitt-Trigger Inverter, SC-88A / SC-70-5
MC74VHC1G14DFT1G

MC74VHC1G14DFT1G - Single Schmitt-Trigger Inverter, SC-88A / SC-70-5

The onsemi MC74VHC1G14DFT1G is a single-channel CMOS Schmitt-trigger inverter fabricated with advanced high-speed silicon-gate CMOS technology, supplied in a 5-pin SC-88A / SC-70-5 / SOT-353 surface-mount package. It operates from a 2 V to 5.5 V Vcc supply, supports input voltages up to 7 V regardless of Vcc, and provides balanced propagation delays with typical tPD of 3.5 ns at VCC = 5 V. A Schmitt-trigger inverter is a single-input logic gate whose transfer characteristic includes a defined upper and lower threshold voltage (hysteresis), making the device immune to slow or noisy input edges. The MC74VHC1G14 sits within the broader logic-gate family (inverter -> NOT gate -> combinational logic -> CMOS logic -> standard logic IC), and the 74VHC sub-family delivers Bipolar-Schottky-TTL-class speed at a fraction of the quiescent power. Key features include CMOS-level input thresholds (the MC74VHC1GT14 variant provides TTL-level thresholds), 8 mA output drive capability at 5 V, 1 µA maximum quiescent supply current at 25 °C, power-down protection on the inputs, and internal ESD protection. The hysteresis characteristic is typically 1.5 V at 5 V supply, eliminating oscillations on slowly changing signals and improving noise margin in harsh environments. The architecture uses three internal stages with a buffered output stage, providing high noise immunity and stable output swings rail-to-rail. The internal FET count is ≤ 100, contributing to its tiny footprint and low dynamic power. Pb-free packages are available, and the device is designed for 1.65 V to 5.5 V Vcc operation, allowing direct interfacing between 3.3 V and 5 V logic domains. Typical applications include signal conditioning for mechanical switch debouncing, waveform shaping in oscillator and pulse-generator circuits, level translation between 5 V and 3.3 V logic, microcontroller reset and wake-up pulse generation, and general-purpose logic inversion in portable, industrial, and consumer electronics where board space is at a premium. Design consideration: although the part tolerates input voltages up to 7 V even with Vcc = 0 V, designers must still respect the absolute-maximum input rating and avoid persistent over-voltage stress. Decouple Vcc with a 0.1 µF ceramic capacitor placed within a few millimeters of the supply pin. This page synthesizes distributor pricing, drop-in pin-compatible alternatives in the same SC-88A footprint, comparison parameters, and practical design notes beyond what the manufacturer datasheet alone provides, giving engineers a one-stop reference for sourcing and qualifying the MC74VHC1G14DFT1G.

RFQ Contact
MC74VHC1G14DFT2G - Single Schmitt-Trigger Inverter, 2-5.5V CMOS | onsemi
MC74VHC1G14DFT2G

MC74VHC1G14DFT2G - Single Schmitt-Trigger Inverter, 2-5.5V CMOS | onsemi

The onsemi MC74VHC1G14DFT2G is a single-gate CMOS Schmitt-trigger inverter in a 5-pin SC-88A (SOT-353) surface-mount package, designed for 2 V to 5.5 V VCC operation. The device uses silicon-gate CMOS technology to deliver high-speed logic with low static power dissipation of 1 µA maximum at TA = 25 °C, and features a typical propagation delay of 3.5 ns at VCC = 5 V per the onsemi datasheet. The built-in Schmitt-trigger input hysteresis provides high noise immunity and stable output even on slow or noisy edges, making it well-suited for signal conditioning, oscillator building blocks, and level translation in mixed-signal systems. An inverter is a fundamental single-input logic gate that produces a logical NOT of its input. Schmitt-trigger inverters extend this with hysteresis: the input threshold for a rising edge differs from that of a falling edge, which suppresses oscillation on slowly-changing signals and rejects noise on the input rail. This places the MC74VHC1G14 within the broader logic-gate hierarchy: inverter → NOT gate → CMOS logic → standard logic IC → semiconductor. Compared to a plain CMOS inverter, the Schmitt input offers a defined switching window specified as VP (positive threshold) and VN (negative threshold) in the datasheet, eliminating the indeterminate behavior of non-hysteretic gates when the input dwells in the transition region. Key features include power-down protection on the inputs, balanced propagation delays, pin- and function-compatibility with other standard logic families, and a chip complexity of fewer than 100 FETs. The Pb-free package is qualified for modern reflow profiles, and the device is characterized over the -55 °C to +125 °C operating range. The MC74VHC1G14 has CMOS-level input thresholds; the MC74VHC1GT14 variant, sharing the same datasheet, offers TTL-level input thresholds for designers bridging from legacy 5 V TTL logic. From an architectural standpoint, the three-stage internal buffer provides high DC gain while the Schmitt input stage sets the hysteresis band. Because it is a single-gate, single-channel part in a sub-2 mm² footprint, the MC74VHC1G14DFT2G is most often used as a 'helper' logic element - one inverter per chip - where board space is at a premium and a multi-channel gate would waste inputs. Typical applications include oscillator and relaxation-timing circuits using an RC network at the input, button/keyboard debouncing, waveform shaping in sensor front-ends, simple logic-level inversion between 1.8 V, 3.3 V, and 5 V rails, and reset/power-good signal conditioning in microcontroller-based designs. The wide 2 V to 5.5 V supply range makes it equally at home on a coin-cell-powered IoT node and a 5 V industrial controller. The low quiescent current of 1 µA preserves battery life in always-on circuits. When designing with this part, observe the maximum input rise/fall-time limits in the datasheet and place a 0.1 µF decoupling capacitor close to the VCC pin. Unused inputs must not be left floating - tie them to VCC or GND through a resistor to prevent shoot-through current and undefined switching. For drop-in replacement of the onsemi part, the TI SN74AHC1G14 and Nexperia 74AHC1G14 share the same pinout and function in compatible packages.

RFQ Contact
MC812A4CPVE8 - 16-Bit 8MHz 112-LQFP MCU | NXP
MC812A4CPVE8

MC812A4CPVE8 - 16-Bit 8MHz 112-LQFP MCU | NXP

The NXP MC812A4CPVE8 is a 16-bit CPU12 microcontroller operating at 8 MHz with 1 KB RAM and 4 KB EEPROM in a 112-LQFP 20 mm x 20 mm package. The device combines a CPU12 core, Lite integration module, two asynchronous serial communications interfaces, an SPI interface, timer and pulse accumulation modules, and an 8-bit analog-to-digital converter. A microcontroller is a programmable system-on-chip that integrates a processor core, nonvolatile memory, working memory, peripherals, and communication interfaces. The MC812A4CPVE8 belongs to the broader embedded-control hierarchy: MCU, embedded processor, semiconductor, and electronic component. Its CPU12 architecture is designed for embedded control and uses an intermodule bus to connect standard on-chip modules. Verified listing data identifies the part as an HC12-family 16-bit MCU with an 8 MHz operating frequency, 4 KB EEPROM organized as 4K x 8, and a 112-LQFP package measuring 20 mm x 20 mm. Mouser additionally identifies 1 KB RAM. The product combines serial communications and embedded-control resources suitable for legacy HC12 designs, although the manufacturer page labels it End of Life. The two SCI peripherals provide asynchronous serial communication paths, while SPI supports synchronous peripheral connectivity. The timer and pulse-accumulation resources support event timing and input measurement, and the 8-bit ADC provides analog signal acquisition. Exact electrical limits, memory-map details, ADC performance, and pin-level functions require confirmation in the manufacturer datasheet. Potential uses include industrial control, legacy peripheral controllers, communication bridges, timing modules, and embedded instruments where a CPU12 system is already qualified. The 112-LQFP package offers a substantial pin count but requires a fine-pitch PCB footprint and careful signal-integrity review. Because the NXP product page identifies the device as End of Life, engineers should confirm availability, last-time-buy terms, firmware support, and any approved migration before new production designs. For drop-in planning, verify the exact package drawing, pin multiplexing, memory configuration, oscillator requirements, reset behavior, and peripheral mapping against the selected replacement. A same-footprint MCU is not automatically software- and timing-compatible. The verified cross-reference results identify comparison candidates, but they do not establish a qualified drop-in replacement. This page consolidates distributor availability, package information, lifecycle context, and engineering cautions around this legacy MCU. It does not invent missing electrical specifications or treat generic parametric matches as guaranteed drop-in replacements.

RFQ Contact
MC860ENCVR50D4R2 - MPC860 50MHz PowerQUICC MPU 357-BGA | NXP
MC860ENCVR50D4R2

MC860ENCVR50D4R2 - MPC860 50MHz PowerQUICC MPU 357-BGA | NXP

The NXP MC860ENCVR50D4R2 is a PowerQUICC MPC860 32-bit microprocessor clocked at 50 MHz, housed in a 357-ball BGA (PBGA, 25 x 25 mm) package and supplied at 3.3 V I/O. It belongs to the MPC860 communications processor family that integrates a PowerPC core with peripheral and communication subsystems historically used in telecom and industrial networking equipment. A PowerQUICC microprocessor is a communication-centric integrated CPU plus peripheral device that combines a PowerPC processor core with dedicated communication engines (CPM) for protocol handling, UART, SCC, SMC, and memory controllers. Within the broader taxonomy, the MPC860 sits in the hierarchy of microprocessor -> embedded MPU -> communications processor -> PowerQUICC -> semiconductor. It enables designers to consolidate networking, serial, and basic control-plane tasks onto a single die, reducing system complexity compared with separate CPU plus ASIC approaches. Key features include a 32-bit PowerPC core running at 50 MHz, 3.3 V supply operation, a 357-ball Plastic BGA footprint (25 x 25 mm) with 1.27 mm pitch, integrated communications peripheral module (CPM) supporting multiple serial channels, and JTAG/BDM support for boundary scan and on-chip debug. The device is offered in a Tape and Reel packaging format. Per the DigiKey product listing, the device ships in Digi-Reel cut-tape formats directly from manufacturer reels. The MPC860 family uses a power-on reset and PLL subsystem with separate clock domains that allow the CPU and CPM to operate at different rates while sharing peripherals. Internal memory controllers support DRAM, SRAM, and Flash without external glue logic, and a separate PCMCIA/PC Card controller interface is included for legacy I/O expansion. These characteristics matter most in sustained-throughput industrial designs where deterministic serial behavior is required. Typical applications include legacy telecom line-card controllers, industrial serial concentrators and protocol bridges, factory automation gateways, and networking routers and bridges. The wide 3.3 V tolerance and integrated CPM make the part especially attractive when multiple serial channels are required in a small BOM. When designing with this part, plan decoupling carefully: place bulk and high-frequency ceramics as close as possible to each supply ball and ensure a solid ground reference on inner PCB layers. Consider thermal management of the large 25 x 25 mm BGA because the entire device is often board-area-constrained and cannot benefit from airflow. This page synthesizes distributor stock and pricing, drop-in replacement candidates from the MPC860 family, PCB layout guidance, and BGA handling notes that go beyond the manufacturer datasheet alone.

RFQ Contact
MC8640DTHX1067NE - Dual-Core PowerPC e600 SoC, 2x1067MHz | NXP
MC8640DTHX1067NE

MC8640DTHX1067NE - Dual-Core PowerPC e600 SoC, 2x1067MHz | NXP

The NXP Semiconductors MC8640DTHX1067NE is a dual-core 32-Bit Power Architecture System-on-Chip (SoC) running at 2x1067MHz, housed in a 1023-ball FCBGA (33x33 mm) package and qualified to the industrial -40C to +105C temperature range. Each core integrates the PowerPC e600 superscalar engine with AltiVec SIMD, and the device exposes DDR1/DDR2 memory controllers, dual GbE MACs, multiple PCI Express lanes, and Serial RapidIO (SRIO) links in a single chip. Per the manufacturer product page, this part is the Rev 3.0 die (G8 stepping) at a 0.95V core voltage. What is a Power Architecture SoC? It is a single integrated circuit that combines one or more CPU cores, a memory controller, and high-speed serial I/O (such as PCIe and SRIO) into one silicon die. Within the broader taxonomy, the MPC8640D belongs to: microprocessor -> embedded MPU -> SoC -> communications processor -> semiconductor. By collapsing what used to be separate northbridge, southbridge, and PHY devices into one BGA, the MPC8640D reduces board area, BOM cost, and latency between cores and I/O for data-plane workloads. Key features include two independent e600 cores with private L1 caches and a shared L2, hardware MMU and floating-point unit per core, dual integrated GbE controllers with on-chip SerDes, integrated DDR1/DDR2 controller with ECC, multi-lane PCI Express and Serial RapidIO fabrics, four-channel DMA, and a wide set of peripheral interfaces (I2C, SPI, UART, GPIO). The 1023-ball FCBGA package supplies the high pin-count needed to expose these parallel and serial interfaces while keeping critical high-speed nets length-matched. Typical applications are wireless baseband/base-station line cards, telecom/datacom routers and switches, defense and aerospace signal processing, networked storage controllers, industrial control and ruggedized computing, and long-life industrial embedded designs that need deterministic multiprocessor performance and rich I/O. The extended -40C to +105C junction range also lets it serve outdoor or sealed enclosures without derating. When designing with this part, follow the NXP reference-design PCB stack-up and length-matching rules for the DDR2 controller, PCIe, and SRIO links - signal-integrity violations on these interfaces are the leading cause of first-spin failures. Allocate a 4-layer (or thicker) stack-up with controlled-impedance traces and stitch the GND/VDD planes under the BGA to provide low-impedance return paths for the high-speed SerDes lanes. This page synthesizes cross-distributor pricing, Rev 3.0 die-step alternatives, and practical layout notes that are not present in the raw manufacturer datasheet - including a side-by-side MC8640 family comparison and industrial-temperature variants.

RFQ Contact
MC8640DTVJ1067NE - Dual-Core PowerPC SoC, 2x1067MHz | NXP
MC8640DTVJ1067NE

MC8640DTVJ1067NE - Dual-Core PowerPC SoC, 2x1067MHz | NXP

The NXP MC8640DTVJ1067NE is a dual-core 32-bit Power Architecture system-on-chip (SoC) from the MPC8640D family, integrating two e600 cores running at 1.067 GHz each in a 1023-ball FCCBGA (33x33 mm) package. The device targets embedded networking, telecom, aerospace and defense, storage, and industrial applications requiring deterministic performance, high-bandwidth I/O, and multi-protocol connectivity. It is built on a high-performance PowerPC core with AltiVec SIMD engine and supports DDR1/DDR2 memory with ECC, providing a balanced compute-and-I/O platform for line cards, control-plane processors, and base-station controllers. What is an embedded SoC microprocessor? An embedded SoC microprocessor is a single silicon die that integrates one or more CPU cores, memory controllers, high-speed serial interfaces, and peripheral IP into one package. Within the broader taxonomy, an embedded SoC is a sub-class of microprocessors (MPU) that are designed for headless applications (no display), unlike microcontrollers (MCU) which usually include on-chip Flash and a richer peripheral set. The MPC8640D family is a classic MPU SoC: high-core-clock throughput, large external memory bandwidth, and standards-based serial I/O (PCIe, SRIO, GbE) that allows the same silicon to be reused across compute-intensive platforms. The headline feature set includes dual e600 cores each with AltiVec vector processing, dual integrated Gigabit Ethernet controllers with TCP/IP acceleration, dual PCIe Gen1 interfaces, dual Serial RapidIO (SRIO) ports, dual DDR1/DDR2 memory controllers with ECC, and a complete set of local-bus and DMA engines. Operating temperature is rated -40C to +105C (industrial / extended), and the part is supplied at revision 3 of the silicon. Junction thermal limits and a thermally enhanced FCCBGA package allow deployment in NEBS-compliant telecom platforms and ruggedized industrial systems. Architecturally, the MC8640D shares the e600 core complex with the MPC8641, but the 8640D family is optimized for parallel DSP-like workloads (via AltiVec) and for deterministic inter-core traffic via shared SRAM and coherency fabric. Designers typically pair the SoC with DDR2-667 ECC memory, NOR/NAND Flash via the local bus, and an external PHY for SGMII-attached Gigabit Ethernet. Power is delivered via multiple rails (core 1.05V, DDR 1.8V, I/O 2.5V/3.3V) requiring careful sequencing and decoupling; reference schematics in the NXP hardware reference manual are strongly recommended before layout. Typical applications include embedded networking line cards, telecom base-station baseband controllers, defense/aerospace mission computing, RAID storage controllers, industrial automation controllers, and machine-vision pre-processors. The combination of dual cores, AltiVec SIMD, multi-protocol I/O, and industrial temperature grade makes the device a fit for deterministic real-time workloads where x86 CPUs would consume too much power or board area. Designers should carefully review the 1023-ball FCCBGA escape, which requires HDI PCB (typically 8+ layers with micro-vias) and controlled-impedance routing for DDR, PCIe, SRIO, and SGMII. NXP's hardware reference manual and board design guidelines are essential reading before committing to a layout. JTAG/COP debug access must be reserved on the board for production test and field debug. This page consolidates current distributor pricing, drop-in alternatives, datasheet links, and practical design notes that complement - but do not replace - the official NXP MPC8640D hardware reference manual and reference design package.

RFQ Contact
MC8640DTVJ1250HE - Dual-Core 1.25GHz PowerPC e600 SoC | NXP
MC8640DTVJ1250HE

MC8640DTVJ1250HE - Dual-Core 1.25GHz PowerPC e600 SoC | NXP

The NXP MC8640DTVJ1250HE is a dual-core 32-bit PowerPC e600 microprocessor SoC operating at 2 x 1.25 GHz in a 1023-ball FCCBGA (33x33 mm) package, engineered for embedded networking, telecom, aerospace and defense, storage, and industrial computing. It integrates DDR1/DDR2 memory controllers, AltiVec SIMD engine, Gigabit Ethernet MAC, PCI Express, and Serial RapidIO interfaces in a single die. A microprocessor SoC (System-on-Chip) integrates one or more CPU cores, memory controllers, and I/O peripherals onto a single silicon die, replacing what would otherwise require a discrete chipset. The MC8640D family sits in the high-performance tier of NXP's PowerPC QorIQ portfolio, providing a multi-core embedded computing platform for line-rate packet processing and signal aggregation where deterministic performance and long-life industrial-grade reliability are mandatory. Key features include two PowerPC e600 cores with AltiVec vector processing, integrated DDR1/DDR2 controller with ECC, four Gigabit Ethernet ports, dual PCI Express controllers, dual Serial RapidIO ports, dual DMA engines, and -40C to +105C industrial operating temperature range. The 1023-ball FCCBGA package provides high I/O density required for the integrated peripheral set. Architecturally, the MC8640D leverages the e600 core, which combines a 32-bit PowerPC instruction set with AltiVec SIMD extensions, delivering strong performance per watt for data-plane workloads. The integrated northbridge-style memory controller reduces external chipset cost and latency, while the high-bandwidth SerDes fabric supports multiple concurrent high-speed links. Typical applications include embedded networking routers and switches, telecom base-station controllers, aerospace and defense signal-processing platforms, RAID storage controllers, industrial automation, and high-performance computing appliances. The wide industrial temperature range and long-term NXP product support make it suitable for long-life programs requiring 10+ year supply continuity. When designing with the MC8640DTVJ1250HE, allocate proper PCB layer count for the FCCBGA escape routing - typically 8 to 12 layers with microvia stackups - and provide matched-length impedance control for the SerDes lanes. The industrial-grade junction temperature window permits fanless or conduction-cooled deployments. This page consolidates distributor pricing, drop-in alternative cross-references, and practical design guidance not found in the manufacturer datasheet alone, helping engineers verify second sources and design-in decisions for long-lifecycle embedded systems.

RFQ Contact