AD842JN vs AD8002ANZ Vergleich

Detaillierter Direktvergleich von AD842JN von Analog Devices und AD8002ANZ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.

Analog Devices
AD8002ANZ AD8002ANZ - Dual 600 MHz CFA, 50 mW | Analog Devices

AD8002ANZ - Dual 600 MHz CFA, 50 mW | Analog Devices

AD8002ANZ ✓ Aktiv

Spezifikationsvergleich

Parameter AD842JN AD8002ANZ
Marke Analog Devices Analog Devices
Kategorie Amplifier ICs Amplifier ICs
Lebenszyklusstatus Aktiv Aktiv
Product Type Single wideband precision operational amplifier —
Gain-Bandwidth Product 80 MHz —
Minimum Stable Gain 2 —
Supply Voltage Range +/-5 V to +/-18 V [DATA_NEEDED: supply voltage range]
Minimum Output Current Drive 100 mA —
Input Offset Voltage [DATA_NEEDED: input offset voltage] [DATA_NEEDED: input offset voltage]
Input Bias Current [DATA_NEEDED: input bias current] —
Slew Rate [DATA_NEEDED: slew rate] 1200 V/µs
Open-Loop Gain [DATA_NEEDED: open-loop gain] —
Common-Mode Rejection Ratio [DATA_NEEDED: common-mode rejection ratio] —
Power-Supply Rejection Ratio [DATA_NEEDED: power-supply rejection ratio] —
Input Noise Density [DATA_NEEDED: input noise density] —
Output Voltage Swing [DATA_NEEDED: output voltage swing] —
Betriebstemperaturbereich [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Gehäuse 14-pin PDIP 8-lead plastic DIP, 0.300 inch (7.62 mm) pitch
Montageart Through-hole Through-hole
Process Technology Junction-isolated complementary bipolar (CB) process —
Short-Circuit Protection [DATA_NEEDED: short-circuit protection] —
RoHS-Status [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Amplifier Type — Current Feedback Amplifier
Number of Circuits — 2 circuits
Small-Signal Bandwidth at Gain +1 — 600 MHz (-3 dB)
Small-Signal Bandwidth at Gain +2 — 500 MHz (-3 dB)
Settling Time to 0.1% — 16 ns
Maximum Power Dissipation — 50 mW
Maximum Supply Current — 5.0 mA per amplifier
Nominal Supply Voltage — ±5 V
Gain Flatness — 0.1 dB to 60 MHz at gain +2 with RL = 150 ohm
Differential Gain Error — 0.01%
Differential Phase Error — 0.02 degrees
Packaging — Tube
Input Noise Voltage — [DATA_NEEDED: input noise voltage]
Output Current — [DATA_NEEDED: output current]

Datenblätter & Ressourcen

Alle Produkte durchsuchen BOM erstellen Angebot anfordern