AD842JN vs AD8002ANZ Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng AD842JN sa pamamagitan ng Analog Devices at AD8002ANZ sa pamamagitan ng Analog Devices. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Analog Devices
AD842JN - 80MHz High-Speed Operational Amplifier | Analog Devices
AD842JN ✓ NakahandaPagsanggunian na paghahambing
| Parametro | AD842JN | AD8002ANZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Kategorya | Amplifier ICs | Amplifier ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Product Type | Single wideband precision operational amplifier | — |
| Gain-Bandwidth Product | 80 MHz | — |
| Minimum Stable Gain | 2 | — |
| Supply Voltage Range | +/-5 V to +/-18 V | [DATA_NEEDED: supply voltage range] |
| Minimum Output Current Drive | 100 mA | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 1200 V/µs |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | — |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | — |
| Power-Supply Rejection Ratio | [DATA_NEEDED: power-supply rejection ratio] | — |
| Input Noise Density | [DATA_NEEDED: input noise density] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Hanay ng Temperature na Operasyon | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Packhaging | 14-pin PDIP | 8-lead plastic DIP, 0.300 inch (7.62 mm) pitch |
| Uri ng Pagpapasok | Through-hole | Through-hole |
| Process Technology | Junction-isolated complementary bipolar (CB) process | — |
| Short-Circuit Protection | [DATA_NEEDED: short-circuit protection] | — |
| Tindminan RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Amplifier Type | — | Current Feedback Amplifier |
| Number of Circuits | — | 2 circuits |
| Small-Signal Bandwidth at Gain +1 | — | 600 MHz (-3 dB) |
| Small-Signal Bandwidth at Gain +2 | — | 500 MHz (-3 dB) |
| Settling Time to 0.1% | — | 16 ns |
| Maximum Power Dissipation | — | 50 mW |
| Maximum Supply Current | — | 5.0 mA per amplifier |
| Nominal Supply Voltage | — | ±5 V |
| Gain Flatness | — | 0.1 dB to 60 MHz at gain +2 with RL = 150 ohm |
| Differential Gain Error | — | 0.01% |
| Differential Phase Error | — | 0.02 degrees |
| Packaging | — | Tube |
| Input Noise Voltage | — | [DATA_NEEDED: input noise voltage] |
| Output Current | — | [DATA_NEEDED: output current] |