AD842JN vs AD8002ANZ Perbandingan

Perbandingan bersamaan detil AD842JN dari Analog Devices dan AD8002ANZ dari Analog Devices. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

Analog Devices
AD8002ANZ AD8002ANZ - Dual 600 MHz CFA, 50 mW | Analog Devices

AD8002ANZ - Dual 600 MHz CFA, 50 mW | Analog Devices

AD8002ANZ ✓ Aktif

Perbandingan Spesifikasi

Parameter Umum AD842JN AD8002ANZ
Merek Analog Devices Analog Devices
Kategori Amplifier ICs Amplifier ICs
Status Lingkungan Hidup Aktif Aktif
Product Type Single wideband precision operational amplifier —
Gain-Bandwidth Product 80 MHz —
Minimum Stable Gain 2 —
Supply Voltage Range +/-5 V to +/-18 V [DATA_NEEDED: supply voltage range]
Minimum Output Current Drive 100 mA —
Input Offset Voltage [DATA_NEEDED: input offset voltage] [DATA_NEEDED: input offset voltage]
Input Bias Current [DATA_NEEDED: input bias current] —
Slew Rate [DATA_NEEDED: slew rate] 1200 V/µs
Open-Loop Gain [DATA_NEEDED: open-loop gain] —
Common-Mode Rejection Ratio [DATA_NEEDED: common-mode rejection ratio] —
Power-Supply Rejection Ratio [DATA_NEEDED: power-supply rejection ratio] —
Input Noise Density [DATA_NEEDED: input noise density] —
Output Voltage Swing [DATA_NEEDED: output voltage swing] —
Rentang Suhu Kerja [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Paket 14-pin PDIP 8-lead plastic DIP, 0.300 inch (7.62 mm) pitch
Tipe Mounting Through-hole Through-hole
Process Technology Junction-isolated complementary bipolar (CB) process —
Short-Circuit Protection [DATA_NEEDED: short-circuit protection] —
Status RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Amplifier Type — Current Feedback Amplifier
Number of Circuits — 2 circuits
Small-Signal Bandwidth at Gain +1 — 600 MHz (-3 dB)
Small-Signal Bandwidth at Gain +2 — 500 MHz (-3 dB)
Settling Time to 0.1% — 16 ns
Maximum Power Dissipation — 50 mW
Maximum Supply Current — 5.0 mA per amplifier
Nominal Supply Voltage — ±5 V
Gain Flatness — 0.1 dB to 60 MHz at gain +2 with RL = 150 ohm
Differential Gain Error — 0.01%
Differential Phase Error — 0.02 degrees
Packaging — Tube
Input Noise Voltage — [DATA_NEEDED: input noise voltage]
Output Current — [DATA_NEEDED: output current]

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon