AD842JN vs AD8002ANZ Pengandingan

Pengandingan Sisi Kiri Sisi Kanan Terperinci AD842JN disebabkan oleh Analog Devices dan AD8002ANZ disebabkan oleh Analog Devices. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.

Analog Devices
AD8002ANZ AD8002ANZ - Dual 600 MHz CFA, 50 mW | Analog Devices

AD8002ANZ - Dual 600 MHz CFA, 50 mW | Analog Devices

AD8002ANZ ✓ Aktif

Pengandingan Spesifikasi

Parametr AD842JN AD8002ANZ
Merek Analog Devices Analog Devices
Kategori Amplifier ICs Amplifier ICs
Status Lingkungan Hidup Aktif Aktif
Product Type Single wideband precision operational amplifier —
Gain-Bandwidth Product 80 MHz —
Minimum Stable Gain 2 —
Supply Voltage Range +/-5 V to +/-18 V [DATA_NEEDED: supply voltage range]
Minimum Output Current Drive 100 mA —
Input Offset Voltage [DATA_NEEDED: input offset voltage] [DATA_NEEDED: input offset voltage]
Input Bias Current [DATA_NEEDED: input bias current] —
Slew Rate [DATA_NEEDED: slew rate] 1200 V/µs
Open-Loop Gain [DATA_NEEDED: open-loop gain] —
Common-Mode Rejection Ratio [DATA_NEEDED: common-mode rejection ratio] —
Power-Supply Rejection Ratio [DATA_NEEDED: power-supply rejection ratio] —
Input Noise Density [DATA_NEEDED: input noise density] —
Output Voltage Swing [DATA_NEEDED: output voltage swing] —
Gambaran Suhu Operasi [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Kemasan 14-pin PDIP 8-lead plastic DIP, 0.300 inch (7.62 mm) pitch
Jenis Pemasangan Through-hole Through-hole
Process Technology Junction-isolated complementary bipolar (CB) process —
Short-Circuit Protection [DATA_NEEDED: short-circuit protection] —
Status RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Amplifier Type — Current Feedback Amplifier
Number of Circuits — 2 circuits
Small-Signal Bandwidth at Gain +1 — 600 MHz (-3 dB)
Small-Signal Bandwidth at Gain +2 — 500 MHz (-3 dB)
Settling Time to 0.1% — 16 ns
Maximum Power Dissipation — 50 mW
Maximum Supply Current — 5.0 mA per amplifier
Nominal Supply Voltage — ±5 V
Gain Flatness — 0.1 dB to 60 MHz at gain +2 with RL = 150 ohm
Differential Gain Error — 0.01%
Differential Phase Error — 0.02 degrees
Packaging — Tube
Input Noise Voltage — [DATA_NEEDED: input noise voltage]
Output Current — [DATA_NEEDED: output current]

Laporan Datasheet & Sumber

Lihat Semua Produk Buat BOQ Minta Bao Harga