EP1C4F400C6 - Cyclone FPGA, 4000 Cells, 400-BGA | Intel
Teilenummer: EP1C4F400C6 ⚠ Letzte Bestellmöglichkeit| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $38.5 | $38,50 |
| 10 | $34.2 | $342,00 |
| 100 | $28.75 | $2.875,00 |
| 500 | $24.1 | $12.050,00 |
| 1.000 | $21.6 | $21.600,00 |
EP1C4F400C6 Übersicht
A Field Programmable Gate Array (FPGA) is a semiconductor device built around an array of configurable logic blocks (CLBs/LEs) connected by programmable interconnect, allowing hardware engineers to implement arbitrary digital logic that is re-programmable in-circuit. Within the broader taxonomy, an FPGA belongs to programmable logic devices (PLD), which sit under digital logic ICs and ultimately under integrated circuits. The Cyclone family sits at the entry-level / low-cost tier of the FPGA hierarchy, above simple CPLDs but below the Stratix high-performance tier.
Key features of the EP1C4F400C6 include 4,000 logic elements distributed across 400 LABs, 301 user I/O pins (supporting LVTTL, LVCMOS, SSTL, and LVDS), 78 Kbits of M4K embedded RAM blocks, two PLLs for clock management, and support for external memory interfaces including SDR SDRAM, FCRAM, and SRAM. The "C6" speed grade designates a commercial temperature range (0°C to +85°C) with a -6 speed bin, while the "F400" package code indicates the 400-ball FineLine BGA.
The Cyclone architecture uses a 4-input look-up table (LUT) per logic element with dedicated carry-chain and register-chain routing for high arithmetic performance. The 130nm process and 1.5V core supply keep dynamic power manageable for high-volume consumer, industrial, and communications designs, while the embedded M4K blocks enable efficient on-chip FIFOs, buffering, and small memory-mapped data paths.
Typical applications include digital signal processing front-ends, industrial control and motor drive glue logic, video processing and display controllers, communications protocol bridging, and cost-sensitive prototype designs that benefit from FPGA flexibility without high-end transceiver integration.
When designing with this device, careful attention must be paid to power distribution across the 400-ball BGA, signal-integrity-driven PCB stackup, and I/O bank VCCIO planning, since mixed-voltage I/O standards require per-bank supply rails.
This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not collected in any single manufacturer document.
Drop-in-Alternativen für EP1C4F400C6 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit EP1C4F400C6 (gleiche Bauform und Footprint) – abweichend in Speed Grade, Package, Family, Operating Temperature, Total RAM Bits.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
EP1C4F400C8N
✅ Drop-In✓ Auf Lager
$15.26 / Stück
Datenblatt ansehen →EP1C4F400C7N
✅ Drop-In✓ Auf Lager
$28.9 / Stück
Datenblatt ansehen →EP1C4F400I7N
✅ Drop-In✓ Auf Lager
$26.75 / Stück
Datenblatt ansehen →EP1C4F400C6N
✅ Drop-In✓ Auf Lager
$26.4 / Stück
Datenblatt ansehen →EP1C4F400C7
✅ Drop-In✓ Auf Lager
$18.75 / Stück
Datenblatt ansehen →EP1C4F400C6 Grenzwerte & elektrische Eigenschaften
| Family | Cyclone |
| Logic Elements | 4,000 |
| Logic Array Blocks (LABs) | 400 |
| Total RAM Bits | 78,000 |
| Embedded RAM Blocks | M4K |
| User I/O Pins | 301 |
| PLLs | 2 |
| Gehäuse | 400-ball FineLine BGA (FBGA-400) |
| Process Technology | 130 nm CMOS |
| Core Voltage | 1.5 V |
| Speed Grade | -6 (commercial) |
| Betriebstemperatur | 0°C to +85°C (commercial) |
| Montageart | Surface Mount (BGA) |
EP1C4F400C6 400-ball fineline bga (fbga-400) Pinbelegungsleitfaden
Pinbelegung für EP1C4F400C6 (400-ball fineline bga (fbga-400)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für EP1C4F400C6.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
EP1C4F400C6 ist geeignet für 6 Anwendungs: Industrial Control and Glue Logic, Digital Signal Processing Front-End, Video Processing and Display Controllers, Communications Protocol Bridging, Cost-Sensitive Prototype and Evaluation Designs, Legacy Equipment Modernization and Long-Life Programs.
Industrial Control and Glue Logic
The EP1C4F400C6 is well suited to industrial control and motor-drive glue logic where 4,000 logic elements, 301 user I/Os, and two PLLs provide more than enough capacity for state machines, encoder interfaces, and PWM generation. Its commercial temperature range (0°C to +85°C) covers most factory-floor enclosures with active cooling. The 400-ball BGA enables dense board layouts, while the M4K RAM blocks implement command FIFOs and look-up tables for sensor linearization.
Empfohlen
Digital Signal Processing Front-End
For low-cost DSP front-ends such as audio sample-rate conversion, FIR/IIR filter banks, or simple FFT pre-processing, the EP1C4F400C6's 4,000 LEs and 78 Kbits of embedded RAM provide adequate resources for moderate-complexity algorithms at audio and baseband sample rates. The two PLLs generate the precise clock trees required for ADC/DAC synchronization, and the LVDS-capable I/Os interface directly to common audio and video ADCs without external translators.
Empfohlen
Video Processing and Display Controllers
The EP1C4F400C6 is commonly deployed in video format conversion, de-interlacing, and LCD/TFT timing generator designs. Its 301 user I/Os comfortably drive 24-bit RGB plus control and sync signals, while the M4K RAM blocks implement line buffers and color lookup tables. Designers use the LVDS I/O capability to interface directly to LVDS panel inputs, eliminating external serializer components and reducing BOM cost in consumer displays.
Empfohlen
Communications Protocol Bridging
Bridge designs converting between UART, SPI, I2C, parallel buses, and legacy telecom interfaces fit naturally in 4,000 LEs. The EP1C4F400C6's abundant user I/Os (301) make it ideal for multi-channel protocol aggregation, while the M4K blocks buffer packet payloads between asynchronous clock domains. Industrial protocol stacks such as Modbus, Profibus, and CAN glue logic are easily implemented, making this part a common choice for legacy equipment modernization.
Empfohlen
Cost-Sensitive Prototype and Evaluation Designs
Designers building FPGA-based prototypes for ASIC validation, university teaching platforms, or low-volume OEM products appreciate the EP1C4F400C6's balance of capacity and price. Quartus II Web Edition (free) supports the full Cyclone family, eliminating software licensing friction. The 400-ball BGA exposes enough I/Os for daughter-card expansion, and the abundant M4K RAM enables realistic test benches with realistic data buffering requirements.
Empfohlen
Legacy Equipment Modernization and Long-Life Programs
Many defense, aerospace, and medical OEMs have Cyclone I designs that must continue manufacturing for 10-20 year life cycles. Because the EP1C4F400C6 is on Intel's last-time-buy list (as of 2026-09-06), these programs are stockpiling inventory and qualifying drop-in alternatives such as the EP1C4F400C8N and EP1C4F400I7N. These parts share the same die, package, and pinout, allowing form-fit-function continuity without PCB redesign.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für EP1C4F400C6 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | EP1C4F400C8N | EP1C4F400C7N | EP1C4F400I7N | EP1C4F400C6N | EP1C4F400C7 |
|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | 400-ball FineLine BGA | 400-ball FineLine BGA (same) | 400-ball FineLine BGA (same) | 400-ball FineLine BGA (same) | 400-ball FineLine BGA (same) | 400-ball FineLine BGA (same) |
| Logic Elements | 4,000 | 4,000 | 4,000 | 4,000 | 4,000 | 4,000 |
| LABs | 400 | 400 | 400 | 400 | 400 | 400 |
| User I/Os | 301 | 301 | 301 | 301 | 301 | 301 |
| Speed Grade | -6 | -8 | -7 | -7 | -6 | -7 |
| Temperature Range | 0°C to +85°C (commercial) | 0°C to +85°C (commercial) | 0°C to +85°C (commercial) | -40°C to +100°C (industrial) | 0°C to +85°C (commercial) | 0°C to +85°C (commercial) |
| Lead-Free Finish | No (leaded, C6 suffix) | Yes (N suffix) | Yes (N suffix) | Yes (N suffix) | Yes (N suffix) | No (leaded) |
| Lifecycle Status | Last-Time-Buy | Last-Time-Buy | Last-Time-Buy | Last-Time-Buy | Last-Time-Buy | Last-Time-Buy |
Wichtigste Unterscheidungsmerkmale
- Lowest-cost 4,000-LE Cyclone variant with -6 speed grade (vs. EP1C4F400C8N)
- Commercial temperature range matches cost-driven designs (vs. EP1C4F400I7N)
- Leaded terminal finish for legacy manufacturing compatibility (vs. EP1C4F400C6N)
Designhinweise
The 400-ball FineLine BGA uses a 1.0 mm ball pitch, which mandates a 4-layer or 6-layer PCB stackup with microvia or sub-merged via technology for fan-out. Route all VCCINT (1.5V core) and VCCIO (per-bank I/O supply) rails with wide power planes and place 0.1 µF + 10 µF decoupling capacitors within 100 mil of every supply pin. Use a continuous GND plane on the layer immediately beneath the BGA to provide a low-impedance return path and to dissipate the 1.5W to 3W typical device power.
Estimated: at 100% logic utilization with 200 MHz internal clock, the EP1C4F400C6 dissipates approximately 1.5 W to 3 W. With a typical junction-to-ambient thermal resistance (θJA) of 12 °C/W for a 400-ball BGA on a 4-layer JEDEC test board, junction temperature rise above ambient is ~36 °C. For sustained high-activity designs, ensure at least 8 thermal vias in the BGA center pad to the internal GND plane to maintain junction temperature below 125 °C.
Do not mix LVTTL 3.3V and LVDS 2.5V signals in the same I/O bank without proper VCCIO planning — each bank shares a single VCCIO rail. Floating configuration pins (nCONFIG, nSTATUS, CONF_DONE) can cause undefined startup behavior; tie them through 10 kΩ pull-ups to VCCIO. For JTAG chains, ensure the JTAG pins are not repurposed as general I/O in the Quartus pin planner, or boundary-scan will fail. Finally, do not assume the original Cyclone bitstream format is compatible with Quartus Prime — use Quartus II 13.0sp1 or earlier for compilation.
Compliance-Informationen
EP1C4F400C6 has a leaded (SnPb) terminal finish per the 'no N-suffix' convention; RoHS/REACH status not explicitly stated in verified data. Industrial variants (I7N suffix) and lead-free variants (N suffix) exist for compliant builds.
