EP1S30F780C6GA - Stratix FPGA 32470 LEs 780-FBGA | Intel
Teilenummer: EP1S30F780C6GA ✗ Abgekündigt| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $1337.09 | $1.337,09 |
| 10 | $1280 | $12.800,00 |
| 100 | $1200 | $120.000,00 |
| 500 | $1150 | $575.000,00 |
| 1.000 | $1100 | $1.100.000,00 |
EP1S30F780C6GA Übersicht
A Field-Programmable Gate Array (FPGA) is a programmable logic device that combines configurable logic blocks, programmable interconnect, and dedicated silicon IP such as block RAM, DSP slices, PLLs, and high-speed serial transceivers. FPGAs sit above fixed-function ASICs and microcontrollers in the silicon hierarchy because they offer hardware-level parallelism with the ability to be re-programmed in-system, placing them in the broader category of programmable logic devices (PLDs) within digital semiconductors.
Key features of the EP1S30F780C6GA include 32,470 logic elements, 3,317,184 RAM bits, 597 maximum user I/O pins, embedded DSP blocks for high-throughput multiplication-accumulation, multiple phase-locked loops for clock management, and support for multiple I/O standards including LVDS, LVTTL, LVCMOS, SSTL, and HSTL. The 780-FBGA package exposes all user I/O through a high-density ball grid that supports dense board layouts.
The EP1S30F780C6GA uses Altera's Stratix architecture with embedded memory and dedicated signal-processing blocks. Designers configure logic and routing through the Quartus II design software, which is also used for timing closure, floorplanning, and bitstream generation. The architecture targets high-throughput parallel processing where conventional processors would bottleneck.
Typical applications include communications infrastructure such as base station baseband and protocol bridging, industrial automation controllers, high-speed data acquisition front-ends, and military/aerospace signal processing. The 597-I/O capacity also makes the device suitable for prototyping ASIC designs and for high-density test and measurement instrumentation.
When designing with this part, pay close attention to power planning: the 1.5 V core supply must be tightly decoupled with bulk and ceramic capacitors close to each supply pin. The 780-BGA footprint requires careful PCB stack-up and via-in-pad or microvia technology for reliable assembly. Signal integrity must be simulated for high-speed LVDS pairs and external memory interfaces to maintain timing margins.
This product page consolidates distributor pricing, parametric comparison, and a drop-in alternative list to streamline sourcing and design decisions, supplementing the official Intel datasheet.
Drop-in-Alternativen für EP1S30F780C6GA – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit EP1S30F780C6GA (gleiche Bauform und Footprint) – abweichend in Package, Operating Temperature, Speed Grade, Process Technology, DSP Blocks.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
EP1S30F780C6
✅ Drop-In✓ Auf Lager
$1125 / Stück
Datenblatt ansehen →EP1S25F780C6
✅ Drop-In✓ Auf Lager
$791.02 / Stück
Datenblatt ansehen →EP1S25F780C6N
✅ Drop-In✓ Auf Lager
$780 / Stück
Datenblatt ansehen →EP1S20F780C6
✅ Drop-In✓ Auf Lager
Preis auf Anfrage
Datenblatt ansehen →EP1S20F780C6N
✅ Drop-In✓ Auf Lager
$188.75 / Stück
Datenblatt ansehen →EP1S30F780C6GA Grenzwerte & elektrische Eigenschaften
| Series | Stratix |
| Family | Stratix FPGA |
| Logic Elements | 32,470 |
| Total RAM Bits | 3,317,184 |
| Number of I/O | 597 (maximum user I/O) |
| Core Voltage | 1.425 V to 1.575 V |
| Process Technology | 0.13 um |
| Gehäuse / Bauform | 780-BBGA, FCBGA |
| Supplier Device Package | 780-FBGA (29 x 29 mm) |
| Montageart | Surface Mount |
| DSP Blocks | Integrated dedicated multipliers |
| PLL Count | Multiple (per Stratix family) |
| Configuration Memory | SRAM-based, volatile |
| Architecture | Altera Stratix (programmable logic + TriMatrix memory + DSP blocks) |
EP1S30F780C6GA 780-fbga (29 x 29 mm) Pinbelegungsleitfaden
Pinbelegung für EP1S30F780C6GA (780-fbga (29 x 29 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für EP1S30F780C6GA.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
EP1S30F780C6GA ist geeignet für 6 Anwendungs: Communications Baseband Processing, Industrial Automation and Control, High-Speed Data Acquisition Front-Ends, ASIC Prototyping and Emulation, Military and Aerospace Signal Processing, Test and Measurement Instrumentation.
Communications Baseband Processing
The EP1S30F780C6GA suits communications baseband and protocol-bridging designs because of its 32,470 logic elements and dedicated DSP blocks for high-throughput multiply-accumulate operations. Its 597 user I/O accommodate multiple external memory interfaces (DDR, QDR, SRAM) and high-speed LVDS links to RF front-ends. The 1.5 V core and Stratix TriMatrix memory deliver deterministic latency for symbol-rate processing in 3G/4G base stations.
Empfohlen
Industrial Automation and Control
Industrial controllers, programmable logic controllers (PLCs), and motion-control systems benefit from the EP1S30F780C6GA's high logic density and abundant I/O. The 597 available user I/O can drive dozens of sensor inputs, encoder feedback channels, and actuator outputs concurrently. Integrated PLLs provide deterministic clocking for multi-axis servo loops, and Quartus II enables deterministic real-time firmware development for safety-critical machinery.
Empfohlen
High-Speed Data Acquisition Front-Ends
The EP1S30F780C6GA's 3,317,184 RAM bits provide buffering for streaming ADC data at hundreds of MSPS, while 597 user I/O support wide LVDS or parallel CMOS interfaces to high-resolution converters. The dedicated DSP blocks accelerate FIR filtering and FFT pipelines commonly required in oscilloscopes, spectrum analyzers, and software-defined radio front-ends. Pin counts at 597 leave ample margin for downstream processing and storage links.
Empfohlen
ASIC Prototyping and Emulation
Designers use the EP1S30F780C6GA for ASIC prototyping and hardware emulation because the 32,470 LEs can map large RTL blocks before committing to silicon. The 780-FBGA package exposes enough I/O to bring out test points, memory buses, and emulation headers. Quartus II integration with synthesis tools allows rapid incremental compilation cycles that speed verification of multi-million-gate ASIC designs.
Empfohlen
Military and Aerospace Signal Processing
The EP1S30F780C6GA, when ordered with industrial or military temperature grades, serves in avionics, radar processing, and electronic-warfare subsystems. Its high logic density implements parallel beamforming and pulse-Doppler processing at sample rates unattainable with general-purpose processors. The 780-BGA package supports ruggedized board stacks with underfill and is documented in the Stratix Device Handbook for defense applications.
Empfohlen
Test and Measurement Instrumentation
Logic analyzers, protocol testers, and bit-error-rate testers leverage the EP1S30F780C6GA's 597 I/O for multi-channel pattern generation and capture. On-chip TriMatrix memory buffers deep acquisition records, while DSP blocks accelerate real-time protocol decoding. Quartus II IP cores for PCIe, Ethernet, and serial RapidIO simplify integrating the FPGA into modular instrumentation chassis.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für EP1S30F780C6GA – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | EP1S30F780C6 | EP1S25F780C6 | EP1S25F780C6N | EP1S20F780C6 | EP1S20F780C6N |
|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | 780-FBGA (29x29) | 780-FBGA (29x29) - same | 780-FBGA (29x29) - same | 780-FBGA (29x29) - same | 780-FBGA (29x29) - same | 780-FBGA (29x29) - same |
| Logic Elements | 32,470 | 32,470 (same) | 25,660 | 25,660 | 18,460 | 18,460 |
| Total RAM Bits | 3,317,184 | 3,317,184 (same) | 1,922,048 | 1,922,048 | 1,663,696 | 1,663,696 |
| User I/O (max) | 597 | 597 | 597 | 597 | 586 | 586 |
| Core Voltage | 1.425 V to 1.575 V | 1.425 V to 1.575 V | 1.425 V to 1.575 V | 1.425 V to 1.575 V | 1.425 V to 1.575 V | 1.425 V to 1.575 V |
| Speed Grade | C6 | C6 | C6 | C6 | C6 | C6 |
| Lead-Free (N suffix) | Unknown | Unknown | Unknown | Yes (N suffix) | Unknown | Yes (N suffix) |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Wichtigste Unterscheidungsmerkmale
- Higher logic capacity in same 780-FBGA footprint (vs. EP1S25F780C6)
- Larger TriMatrix memory than smaller density siblings (vs. EP1S20F780C6)
- Single-supply 1.5 V core simplifies power architecture (vs. Cross-brand SRAM FPGAs)
Designhinweise
Estimated: at a typical Stratix core current of approximately 1.5 A at 1.5 V plus I/O bank power, the EP1S30F780C6GA can draw 3 to 5 W depending on toggle rate. Use a buck regulator with at least 10 percent headroom on the 1.5 V rail, and decouple with 100 nF X7R ceramic capacitors within 5 mm of every supply pin plus bulk polymer or tantalum capacitors on each power plane. The 780-FBGA exposes dozens of GND balls; connect all to a continuous ground plane for thermal dissipation.
The 780-FBGA package has a fine 1.0 mm ball pitch, which typically requires 0.4 mm laser-drilled microvias and via-in-pad technology for reliable assembly. Use a high-Tg FR-4 or low-loss PCB laminate to manage z-axis expansion, and apply underfill during board-level reliability qualification. Per the Stratix Device Handbook pinout guide, all 597 user I/O are assigned to banks; place bank reference voltage pins with local decoupling and verify with the Quartus II pin planner before tape-out.
Stratix SRAM-based FPGAs are volatile and must be configured at every power-up from a configuration device such as an EPC16 or EPCS serial flash; forgetting the configuration source renders the device non-functional. JTAG and passive serial configuration modes are supported but require dedicated pins that must be reserved in the pin planner. Mixing I/O standards across banks without matching VREF voltages causes input latch-up, and exceeding the 1.575 V maximum core voltage instantly destroys the die.
Compliance-Informationen
RoHS, REACH, lead-free, halogen-free, and conflict-mineral compliance were not present in the verified distributor snippets for EP1S30F780C6GA. Intel/Altera discontinued the original Stratix family long before these compliance fields were systematically published, so most reseller listings do not surface them. Industrial (I) temperature grade variants exist for the same die.